I am working on a project to develop a wireless body area network where accelerometers will be placed on different parts of the body and send date wirelessly to a base station connected to a PC. I looked at your evaluation kit EV-ADRN-WSN-1Z and found it very reasonable for this application. My question is about the received raw data at the basestation, we need some method to extract the raw acceleration data with real time stamps at base station to be used later one by some custom built GUI to extract useful information, will that be possible and how?
Also can we accommodate more sensor nodes than only two provided by the development kit.
The communication between the Center Point and ADWSN-UI tool is using UART with defined packet format. The ADWSN-UI tool and Center Point initially exchange the configuration information between them using the UART packet format once the device is selected. After that the sensor data packet is exchanged between them. In your case you need to develop a small application/GUI which can send these command to the Center Point. The packet formats and information on how sensor data is received is provided in the following links.
Procedure to create alternative solution for ANodeCenterPoint tool to receive data from CenterPoint device
FAQ: How to handle different types of sensors used in WSN solution?
Need packet format for EV-ADRN-WSN-1Z EVAL board software
hope this helps.