Related Questions

Thread Details

  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 879 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    




















	
	
			
	
		
		
	
	
		

	    
	    
	    		
Prolem with ADuCRF101MK, I don't see the bunch on AnodeCenterPoint

		
	
				

			

									
					    matteo-89
					
							

            
            			
				
									
											
			
			
				
			
			
			    	
			                    
                
				                on Sep 3, 2015 
				
			
			
		

		
		                     
				
        		

		    
		    		    
		    			

			    
I have wsn quicksrart kit for ADuCRF101MK. When I open AnodeCenterPoint the program found the device but when i turn on the accelerometer it doesn't see nothing. I try to change the configuaration but nothing. I went to AndeConfiguration and I connect the bunch wsn to j-link and I configured the bunch with end point after i connected ADu.. but nothing. Anodecenterpoint see only ADu...and doesn't see my sensor. Can you hel me? thank you

			

			
									
		                             
                        
		


				
				        
        		

			
						
									
												
			
			
                        
                                    
                        
                        
                        
            
			            
						
						
			
			
			
			
		


        
        
        
    
					

			





















	

	

					



			








	
	
	
	



Parents
	
    
	

  • 
	
    






    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
    •  Analog Employees  
    
            
						
                            
            
            				
            
                on Sep 4, 2015 10:05 AM
            
            
						
			            		
    
		
								
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hello,
    
 

    
 
    Thanks for your reply hope this helps in future. 
    
 
    I could see your configuration is not proper from the screenshots you have attached, please follow the blow steps. I assume you are not using router in the network. 
    
 

    
 
    1. Flash the boards with appropriate binaries provided in the package as shown in the blow path. 
    
 

    
 
    PrebuiltBinaries\EVAL-RF101\using_CM3WSD\ADRN01_CP_ROUTER.hex ==> [CP & Router]
    
 
     PrebuiltBinaries\BUNCH\using_CM3WSD\ADRN01_EP_Periodic_LPM.hex ==> [EP Periodic]
    
 

    
 
    2. Please configure the EVAL-ADuCRF101MK as CenterPoint(CP) and BUNCH board as EndPoint(EP). 
    
 

    
 
    3. Configure the EndPoint(EP)and CenterPoint(CP) with the configuration below 
    
 

    
 
    Note: To match your EP configuration, the CP configuration has been modified 
    
 

    
 
    CenterPoint configuration (CP - EVAL-ADuCRF101MK)
    
 
    4035.9325ceaf6ff219cc8df30e7e84c0be6d.png
    
 
    
 
    EndPoint configuration(EP - BUNCH) 
    
 

    
 
    2318.d07ff0643781c9a70b704f517a68cc84.png
    
 
     
    
 
    4. Reset the EP after configuration. 
    
 

    
 
    Hope this helps. 
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
				
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 

	




Reply

    


  • 
	
    






    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
    •  Analog Employees  
    
            
						
                            
            
            				
            
                on Sep 4, 2015 10:05 AM
            
            
						
			            		
    
		
								
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hello,
    
 

    
 
    Thanks for your reply hope this helps in future. 
    
 
    I could see your configuration is not proper from the screenshots you have attached, please follow the blow steps. I assume you are not using router in the network. 
    
 

    
 
    1. Flash the boards with appropriate binaries provided in the package as shown in the blow path. 
    
 

    
 
    PrebuiltBinaries\EVAL-RF101\using_CM3WSD\ADRN01_CP_ROUTER.hex ==> [CP & Router]
    
 
     PrebuiltBinaries\BUNCH\using_CM3WSD\ADRN01_EP_Periodic_LPM.hex ==> [EP Periodic]
    
 

    
 
    2. Please configure the EVAL-ADuCRF101MK as CenterPoint(CP) and BUNCH board as EndPoint(EP). 
    
 

    
 
    3. Configure the EndPoint(EP)and CenterPoint(CP) with the configuration below 
    
 

    
 
    Note: To match your EP configuration, the CP configuration has been modified 
    
 

    
 
    CenterPoint configuration (CP - EVAL-ADuCRF101MK)
    
 
    4035.9325ceaf6ff219cc8df30e7e84c0be6d.png
    
 
    
 
    EndPoint configuration(EP - BUNCH) 
    
 

    
 
    2318.d07ff0643781c9a70b704f517a68cc84.png
    
 
     
    
 
    4. Reset the EP after configuration. 
    
 

    
 
    Hope this helps. 
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
				
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 





Children
	
No Data


		
			








		

		

			
    
				
  • 
					
												
						
						
						
						
						
						
						

																									
						
						

					
					
					
				
    • 
			

		

	








































     



















		        
        

            
Before You Switch

            
        

        

        

            Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.