Related Questions

Thread Details

  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 825 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    




















			

			Captured to Prolem with ADuCRF101MK, I don't see the bunch on AnodeCenterPoint wiki page
								

	
	
			
	
		
		
	
	
		

	    
	    
	    		
Prolem with ADuCRF101MK, I don't see the bunch on AnodeCenterPoint

		
	
				

			

									
					    matteo-89
					
							

            
            			
				
									
											
			
			
				
			
			
			    	
			                    
                
				                on Sep 3, 2015 
				
			
			
		

		
		                     
				
        		

		    
		    		    
		    			

			    
I have wsn quicksrart kit for ADuCRF101MK. When I open AnodeCenterPoint the program found the device but when i turn on the accelerometer it doesn't see nothing. I try to change the configuaration but nothing. I went to AndeConfiguration and I connect the bunch wsn to j-link and I configured the bunch with end point after i connected ADu.. but nothing. Anodecenterpoint see only ADu...and doesn't see my sensor. Can you hel me? thank you

			

			
									
		                             
                        
		


				
				        
        		

			
						
									
												
			
			
                        
                                    
                        
                        
                        
            
			            
						
						
			
			
			
			
		


        
        
        
    
					

			





















	

	

					



			








	
	
	
	



Parents
	
    
	

  • 
	
    






    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
    •  Analog Employees  
    
            
						
                            
            
            				
            
                on Sep 4, 2015 7:56 AM
            
            
						
			            		
    
		
								
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hi,
    
 
    I presume you are using the EV-ADRN-WSN-1Z kit with the ADRadioNet EDKv2.0 version of binaries for the demo setup. The EV-ADRN-WSN-1Z kit contains the following hardware
    
 
    1. EV-ADRN-WSN-1Z (2 BUNCH WSN modules + 1 EVAL-ADuCRF101MK)
    
 
    2. USB-SWD/UART -EMUZ module - 1 min.
    
 

    
 
    Please ensure your configuration is correct. Provide me the following information 
    
 
      
  
      • 
   
      • Version of the binaries used on both the EndPoint and CenterPoint 
        • 
   
      • Mode of powering the EndPoint (battery or USB-SWD/UART-EMUZ)
        • 
   
      • Share the screenshots of the ANodeConfig tool for both EndPoint and CenterPoint displaying configuration.
        • 
  
      
 
    
 
    If you are not able to detect the EndPoint on the ANodeConfig tool please erase and flash the node with the binaries once again using CM3WSD (use Flash Action as Mass Erase to erase the boards) provided with the package. Refer to “ADRN01-All-in-One-GettingStartedGuide_v2.0” provided along with the package for how to flash the binaries using CM3WSD.
    
 
    The issue of EndPoint not detecting after the configuration is addressed in the following post please follow the below link.
    
 
                            https://ez.analog.com/thread/71542
    
 
    Thanks,
    
 
    Harish
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
				
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 

	




Reply

    


  • 
	
    






    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
    •  Analog Employees  
    
            
						
                            
            
            				
            
                on Sep 4, 2015 7:56 AM
            
            
						
			            		
    
		
								
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hi,
    
 
    I presume you are using the EV-ADRN-WSN-1Z kit with the ADRadioNet EDKv2.0 version of binaries for the demo setup. The EV-ADRN-WSN-1Z kit contains the following hardware
    
 
    1. EV-ADRN-WSN-1Z (2 BUNCH WSN modules + 1 EVAL-ADuCRF101MK)
    
 
    2. USB-SWD/UART -EMUZ module - 1 min.
    
 

    
 
    Please ensure your configuration is correct. Provide me the following information 
    
 
      
  
      • 
   
      • Version of the binaries used on both the EndPoint and CenterPoint 
        • 
   
      • Mode of powering the EndPoint (battery or USB-SWD/UART-EMUZ)
        • 
   
      • Share the screenshots of the ANodeConfig tool for both EndPoint and CenterPoint displaying configuration.
        • 
  
      
 
    
 
    If you are not able to detect the EndPoint on the ANodeConfig tool please erase and flash the node with the binaries once again using CM3WSD (use Flash Action as Mass Erase to erase the boards) provided with the package. Refer to “ADRN01-All-in-One-GettingStartedGuide_v2.0” provided along with the package for how to flash the binaries using CM3WSD.
    
 
    The issue of EndPoint not detecting after the configuration is addressed in the following post please follow the below link.
    
 
                            https://ez.analog.com/thread/71542
    
 
    Thanks,
    
 
    Harish
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
				
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 





Children
	
No Data


		
			








		

		

			
    
				
  • 
					
												
						
						
						
						
						
						
						

																									
						
						

					
					
					
				
    •