Original Question: What are the different standards followed in AD6LoWPAN? by NagarjunaG
What are the different standards followed in AD6LoWPAN, including the features supported? Can you list the all the RFC's used?
Verified Answer: RE: What are the different standards followed in AD6LoWPAN? by NagarjunaG
A comprehensive list of all the standards and features supported in the AD6LoWPAN solution is as shown below in the PICS (Protocol Implementation Compliance Statement). The respective sections referenced in the table will have more details on the features and standards.
S.No. |
Feature (PICS) |
Test Spec Reference |
|
6LoWPAN specification |
RFC4944 |
|
Addressing modes |
3 |
2 |
64 bit EUI addressing |
|
3 |
Multicast addressing |
|
|
Adaptation layer and Frame format |
|
4 |
Dispatch header |
|
6 |
Fragmentation |
|
7 |
Stateless Address Autoconfiguration |
6 |
8 |
Ipv6 Link local address |
7 |
9 |
Ipv6 Global address |
|
10 |
Header compression - HC1 |
|
11 |
UDP next header compression |
|
|
Header compression (RFC 6282) |
RFC 6282 |
13 |
LoWPAN_IPHC |
|
14 |
LoWPAN header encoding |
|
15 |
LoWPAN UDP next header compression |
|
16 |
IPv6 Extension Header Compression |
|
|
Ipv6 - Network layer |
RFC 2468 |
17 |
Ipv6 header format |
|
18 |
extension headers |
|
|
ICMPv6 - Network layer |
RFC 4443 |
21 |
ICMPv6 header format |
|
22 |
Checksum calculation |
|
23 |
ICMPv6 Error Messages |
|
24 |
ICMPv6 informal messages (ECHO Request and reply) |
|
|
ND optimization IPv6 - Network layer |
draft-ietf-6lowpan-nd-17 |
|
ND options and messages |
|
26 |
Address Registration option |
|
27 |
6LoWPAN Context option |
|
28 |
Authorative Border Router option |
|
|
Host Behavior |
|
30 |
Sending a Router Solicitation |
|
31 |
Processing a Router Advertisement |
|
33 |
Storing Contexts |
|
34 |
Maintaining Prefix and Context Information |
|
35 |
Registration and Neighbor Unreachability Detection. |
|
|
Router Behavior for 6LR and 6LBR |
|
36 |
Processing a Router Solicitation |
|
38 |
Processing a Neighbor Solicitation |
|
|
Optional Behavior |
|
39 |
Multi-hop Prefix and Context Distribution |
|
|
RPL - Routing protocol |
RFC 6550 |
41 |
Upward Routes and DODAG Construction |
|
42 |
Traffic flows |
4 |
43 |
RPL instance |
5 |
|
ICMPv6 RPL Control Message |
6 |
44 |
DIS messages |
|
45 |
DIO messages |
|
46 |
DAO messages |
|
47 |
DAO-Ack messages |
|
49 |
RPL control message options |
|
50 |
DODAG Global repair |
|
51 |
DODAG local repair |
|
52 |
Trickle timer for DIO |
|
53 |
Downward route establishment |
9 |
58 |
packet forwarding and loop avoidance |
11 |
60 |
of0-etx |
|
62 |
source routing header |
6man-rpl-routing-header-03 |
|
Transport layer |
|
63 |
UDP |
RFC 768 |
Question: RE: What are the different standards followed in AD6LoWPAN? by ezadminThis question has been closed by the EZ team and is assumed answered.