Post Go back to editing

How different is AD6LoWPAN from Contiki OS based implementation?

How different is AD6LoWPAN from Contiki OS based implementation? List the main differences if any?

  • AD6LoWPAN is based on Contiki solution on Analog Devices ADuCRF101 (Integrated Sub-GHz radio transceiver with Cortex M3), with certain upgrades as listed below:


    • Contiki is open source lightweight sensor OS for IoT.
    • Contiki 2.5 is the starting point for AD6LoWPAN, with platform support added for ADuCRF101
    • uIPv6 is the key component of Contiki distribution that is used in AD6LoWPAN


    The following lists of standards have been upgraded in AD6LoWPAN stack.

    • RFC 6550: RPL: IPv6 Routing Protocol for Low-Power and Lossy Network
    • RFC 6282: Compression Format for IPv6 Datagrams over IEEE 802.15.4-based Networks
    • RFC 6775: Neighbor Discovery Optimization for IPv6 over Low-Power Wireless Personal Area Networks


  • This question has been closed by the EZ team and is assumed answered.

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.