ADXL362

Hi STallur, Thanks for responding,

1)       I want to stop continuous polling from ADXL326, for that I tried

with wake-up-mode register setting which was given in data sheet, but

doesn’t give the result as excepted.

2)       When I tried with prebuilt binaries, for that when I make XL

high(S1 switch, Pin 6), I am getting proper output as excepted .

3)       Our ultimate goal is to set a threshold such that whenever the

object is picked to a certain height from the table, say 0.5-1 m.

If tried to modify the source, None of the operations works as explained in

the datasheet.

Please advice.

On Sat, Jul 23, 2016 at 12:06 AM, STallur <

Hi STallur, Thanks for responding,

1)       I want to stop continuous polling from ADXL326, for that I tried

with wake-up-mode register setting which was given in data sheet, but

doesn’t give the result as excepted.

2)       When I tried with prebuilt binaries, for that when I make XL

high(S1 switch, Pin 6), I am getting proper output as excepted .

3)       Our ultimate goal is to set a threshold such that whenever the

object is picked to a certain height from the table, say 0.5-1 m.

If tried to modify the source, None of the operations works as explained in

the datasheet.

Please advice.

On Sat, Jul 23, 2016 at 12:06 AM, STallur <