I have a ZC706 board from Xilinx and I want to run TES for the ADRV9009.
I found this link and downloaded the zipped folder
Under Windows 10 I copied all the contents to a 8GB SD card and install it on the ZC706.
The ZC706 boot and crash just after displaying the Linux Penguin.
What I make wrong ?
ZC706 support was added to the prototyping platform for ADRV9009, but TES still requires ZYNQ3. Just know ZC706 does not have fast enough SERDES so you cannot run the ADRV9009 at max rates.
TES only supports a ZYNQ3 evaluation board, not a ZC706.
The difference is only on the Zynq speed-grade ?
Thanks / Panou
Yes, and ZYNQ3 is built and supported by ADI only so you don't get vivado with it.
Finally I found my mistake. I was not following the process to build a good SD-CARD.
Do you know how I can get access to the ADRV9009's FRU EEPROM contents ? I do not have access to an ADRV9009 board. Thanks
You have to use our fru dump tool: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/software/linux/applications/fru_dump
EEPROM files are located here: https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles