Post Go back to editing

AD9986 initialisation time

Category: Hardware
Product Number: AD9986


I'm currently evaluating the AD9986 and would like information on the potential bring up time of the device and how it can be eventually adjusted (if possible) to be as short as possible.

I've seen in the UG-1578 document there's a recommended Analog Devices initialization procedure. Is there any information indicating how long the initialisation takes when following the procedure when using Tx and Rx paths?

Also, is there any information I can use to help determine a bring up time based on a particular initialisation procedure and input characteristics (clocks, etc.)?

Kind regards,