• State Verified Answer
  • Replies 1 reply
  • Subscribers 50 subscribers
  • Views 160 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
Data link design



		

			

									
					    MARSROBOTICS
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Dec 21, 2022 
				
			
			
		
    

				
		
    
		    		    
		    
		    		            		        
    Category: Hardware
    
    		        		            		    
    Product Number:  AD9364 
    
    		        		    		    	
			
    Dear support team ,

    I'm working on data link design using SDR and this is my first time to use ANALOG DEVICES equipment and i need your help and assist.However while surfing your website i found that AD9364 full fill my requirements  but i need to choose the evaluation board and the carrier board in order to configure and program the transceiver 

    

    Is ADRV9364-Z7020  needed to operate AD-FMCOMMS4-EBZ  ? if this wrong please tell my what to buy with pair of AD9364 .

    Thank you in advance 


    

     
    
								
    

				
				
		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    


	















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													+1
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                        
                on Dec 26, 2022 2:25 PM
            
            
					
      
	
      

		
		
      
					
      FMCOMMS4:
      

      The purpose of the AD-FMComms4-EBZ is to provide an RF platform to software developers, system architects, etc, who want a single platform which operates over a much wider tuning range (70 MHz – 6 GHz).
      

      The AD-FMComms4-EBZ board is very similar to the AD-FMComms2-EBZ and AD-FMComms3-EBZ boards with only one exception, rather than the AD9361 (which is 2 Rx, 2 Tx), it uses the AD9364, a lower cost 1 Rx, 1 Tx device. The AD-FMComms4-EBZ includes both types of external baluns, one targeted for wider tuning range applications (Minicircuits TCM1-63AX+), and ones which provide optimized performance for 2.4 GHz.
      

      Carrier boards supported with FMCOMMS 4 board:
      

       
      

      

      AD9364-Z7020:
      

      The ADRV9364 is built on a portfolio of highly integrated System-On-Module (SOMs) based on the Xilinx Zynq®-7000 All Programmable (AP)SoC. Built on the AD9364, it is schematically & HDL similar to the AD-FMCOMMS4-EBZ.
      

      You can use the ADVR1CRR-FMC with this SOM module.
      

      Refer to the below link for more details:
      

      https://wiki.analog.com/resources/eval/user-guides/adrv936x_rfsom 
      
			
      

		
		
		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													+1
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                        
                on Dec 26, 2022 2:25 PM
            
            
					
      
	
      

		
		
      
					
      FMCOMMS4:
      

      The purpose of the AD-FMComms4-EBZ is to provide an RF platform to software developers, system architects, etc, who want a single platform which operates over a much wider tuning range (70 MHz – 6 GHz).
      

      The AD-FMComms4-EBZ board is very similar to the AD-FMComms2-EBZ and AD-FMComms3-EBZ boards with only one exception, rather than the AD9361 (which is 2 Rx, 2 Tx), it uses the AD9364, a lower cost 1 Rx, 1 Tx device. The AD-FMComms4-EBZ includes both types of external baluns, one targeted for wider tuning range applications (Minicircuits TCM1-63AX+), and ones which provide optimized performance for 2.4 GHz.
      

      Carrier boards supported with FMCOMMS 4 board:
      

       
      

      

      AD9364-Z7020:
      

      The ADRV9364 is built on a portfolio of highly integrated System-On-Module (SOMs) based on the Xilinx Zynq®-7000 All Programmable (AP)SoC. Built on the AD9364, it is schematically & HDL similar to the AD-FMCOMMS4-EBZ.
      

      You can use the ADVR1CRR-FMC with this SOM module.
      

      Refer to the below link for more details:
      

      https://wiki.analog.com/resources/eval/user-guides/adrv936x_rfsom 
      
			
      

		
		
		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data