Post Go back to editing

Regarding external clock 10mhz (ADRV1CRR-BOB with AD9361-z7035)

Hello Support team,

Please find the below link which is the thread i asked in microcontroller no-os drivers regarding how to enable external reference clock 10mhz using no-os drivers for AD9361-z7035.

https://ez.analog.com/microcontroller-no-os-drivers/f/q-a/541221/how-to-enable-external-clock-10mhz-for-ad9361-z7035-using-no-os-drivers/407487#407487

Kindly go through this attached link and guide us for we are getting 0.2Vpp for both onboard reference and external reference (While checking output of ADG772 D1 pin). Is this okay or not?

Waiting for your reply.

Thank you.

Parents Reply
  • Hello

    When we are using internal TCXO(onboard reference) we also get the 0.2vp-p output on the scope for ADG772 D1 pin.

    We check the output on the ADG772 D1 pin using scope probe and we get the below attached output. When we use internal reference.

      

    For both internal reference and external reference we get the 0.2vp-p output on the scope for ADG772 D1 pin.

Children