Post Go back to editing

ADRV9029 observation receiver

Category: Datasheet/Specs
Product Number: ADRV9029

Hi,

I am new to ADRV9029 and I was going through the datasheet of the product.

https://www.analog.com/media/radioverse-adrv9026/adrv9029.pdf

On pg. 127 it is mentioned "The ADRV9029 provides four independent observation receiver inputs", while on the first page it is mentioned that 2 observation receivers with 2 inputs each.

Please clarify for DPD each TX path have its ORx receiver or device has only 2 ORx receivers  and how it is working.

Regards, 

Parents
  • The Chip has 4 ORX RF inputs and internally it has 2 BB inputs only which means ORX1/2 will have one BB path and ORX3/4 will have another BB path. The switching between the ORX1/2 and ORX3/4 will be taken care by ARM depending on the Use case selected.

    Please refer page 113 of the System User Guide, UG1727 for various modes of operation.

Reply
  • The Chip has 4 ORX RF inputs and internally it has 2 BB inputs only which means ORX1/2 will have one BB path and ORX3/4 will have another BB path. The switching between the ORX1/2 and ORX3/4 will be taken care by ARM depending on the Use case selected.

    Please refer page 113 of the System User Guide, UG1727 for various modes of operation.

Children