ez.analog.com/.../cfr-pulse-generation
I am studying CFR by following the link guide above.
If it is a TX signal that is a mixture of LTE signal and 5GNR signal, please inquire how to apply coeff.
Any advice on the above, please.
ez.analog.com/.../cfr-pulse-generation
I am studying CFR by following the link guide above.
If it is a TX signal that is a mixture of LTE signal and 5GNR signal, please inquire how to apply coeff.
Any advice on the above, please.
The CFR pulse waveform file will have combined coefficients for both the LTE, NR carriers.
You can change the BPID and FREQ parameters in the MATLAB code. See example below:
bpid = {'LTE20MHZ15KHZ', 'NR20MHZ15KHZ'};
freq = [-40e6, 45e6];