ADRV9026 Usage In Own Board

You need an FPGA to provide data over sedes for Tx and Rx and SPI interface for configuration of the chip.

You need to develop your own FPGA HDL design for same. ADI provide the API's for configuration of the chip.

Please refer to user guide UG-1726 for more details.

...

You need an FPGA to provide data over sedes for Tx and Rx and SPI interface for configuration of the chip.

You need to develop your own FPGA HDL design for same. ADI provide the API's for configuration of the chip.

Please refer to user guide UG-1726 for more details.

...

* Is that what you mean by the user guide UG-1726 document? 

https://www.analog.com/media/en/technical-documentation/user-guides/eval-adm2461eebz-ug-1726.pdf

* Where I can find provided API's for configuration?

Alperenn_balci said:

* Where I can find provided API's for configuration?

On our product page.https://www.analog.com/en/products/adrv9029.html

Check for ADRV9026/ADRV9029 Released Software SW6.2.0.35

I understand your point but in this document, there is no plan or detailed explanation of this situation. As I understand it, we need to use your C library for our own FPGA. However, can you share binary information so that we can create and use our own library?

I think that's intended to be UG-1727 not 1726. A typo.