I want to configure matching network topology for ADRV9009 so that it can operate at different frequency bands, for example from 625Mhz to 2815Mhz. But there are some components that are mentioned in table 16 (page 126 ADRV9009 datasheet ) that I cannot find their position in the topology for transmitter 1 such as 313 and 310. Here are the pictures of the matching network topology and table 16 that are mentioned in the datasheet. Could you help me with this problem? Thank you.
We don't have a narrowband match EVB for ADRV9009. You shall use the S-Parameter file and design your own matching network.
Which version of the datasheet are you referring to? Please refer to the below screenshot from the latest version of the datasheet.
Thanks for your response, PVALAVAN. I searched for the latest datasheet but the only version I had is Rev.B and it doesn't contain matching topology that is similar to your image. Could you just send me the latest version of the datasheet? thank you.
I apologize for the confusion here.
I was referring to the Rev A version of the datasheet (Older version).
The reference designators are changed in the Rev B version.
So what version should I use? Rev B or A?
Rev B only. You shall refer Rev A only for Tx matching.
We don't have any performance data for Narrowband matching, we recommend you to verify that it meets your performance requirement.