I have the ADRV9009 SOM, and can boot up and run IIOscope remotely. However, I'd also like to use the DisplayPort video output. I've connected a monitor, and USBC keyboard/mouse. I've also run these commands, per https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynqmp#displayport_-_no_picture
My output matches what is expected from that link above:
I then restarted the ADRV9009-ZU11EG board, but I still do not see anything on the monitor. I am running this version of
Is there anything I'm missing to use the DisplayPort?
You really need a monitor that supports DisplayPort natively. This is something we've seen across the board on Xilinx Ultrascale FPGAs.
DisplayPort can be kinda finicky. Are you using an adaptor?
Thanks Travis. I tried it two ways: DP adapter to DVI, and then DP to HDMI input. Is there anything else I can try?
Thanks Travis! You're absolutely right! I found a monitor that had a display port input (not HDMI or DVI), and that worked. Thanks again!