I couldn't find any documents that described the functions/definitions of the LEDs, GPIOs etc. on the EVAL ADRV9009. For example, I wanna learn the meaning of the STATUS1 LED. Please share with us.
Thanks in advance
Please refer to the below document,
EVAL-ADRV9008-1-W/PCBZ/ADRV9008-2-W/PCBZ/ADRV9009-W/PCBZ User Guide UG-1378
Thanks for reply. But the informations about LEDs in UG-1378 are not related to EVAL-ADRV9009. They are ZNYQs LEDs. Please check and share the related document with us.
Please refer to datasheet of AD9528 for more details.
I noticed that on EVAL Board, the LEDs names are Status1-2. But in AD9528, the Status0-1 pins are decribed. I attached the table from AD9528 datasheet. Can you clarify more?
These are lock status pin for AD9528
What I mean is there is a mismatch between actual Eval board and the AD9528 datasheet. On the board LED names are 1 and 2. On the other hand STATUS names in datasheets are 0 and 1. Which one corresponds to which?
Status 1 of AD9528 is status 1 on ADRV9009
Status 0 of AD9528 is status 2 of ADRV9009
Please refer to the schematic for more details