Not Answered

ZCU102 with two ADRV9009 issues 0

39 views

4 replies
on 23 Oct 2020
by Vinod
Not Answered

ADRV9008-1 RF input pins DC bias voltage levels 0

11 views

1 reply
on 23 Oct 2020
by PVALAVAN
Not Answered

axi_dac_load_custom_data and unwanted LO frequency bandwidth 0

57 views

4 replies
on 22 Oct 2020
by srimoyi
Not Answered

ERROR: 247 TALISE_waitArmCmdStatus() failed due to thrown ARM error. ARM time out 0

147 views

12 replies
on 22 Oct 2020
by srimoyi
Not Answered

ADRV9009 Multiple sync ONLY with two situations 0

47 views

3 replies
on 21 Oct 2020
by srimoyi
Not Answered

Does the 14-bit TX data of the adrv9009 sample be MSB aligned? 0

22 views

1 reply
on 19 Oct 2020
by PVALAVAN
Not Answered

ADRV9009 RX balun detach issue 0

61 views

5 replies
on 19 Oct 2020
by srimoyi
Not Answered

ADRV9009 RX Qec Init Calibration Failure Below ~150MHz 0

112 views

11 replies
on 16 Oct 2020
by srimoyi
Not Answered

Signal Bandwidth in ADRV9009 0

103 views

2 replies
on 13 Oct 2020
by srimoyi
Not Answered

ADRV9009 channel phase coherency 0

56 views

3 replies
on 12 Oct 2020
by srimoyi
Not Answered

SDR using adrv9008-1/2 0

38 views

1 reply
on 9 Oct 2020
by srimoyi
Not Answered

Phase noise 0

38 views

1 reply
on 8 Oct 2020
by srimoyi
Not Answered

ADRV9009 - The matching network topology 0

127 views

6 replies

on 6 Oct 2020 by 1610110@hcmut.edu.vn
Not Answered

RF PLL hopping time for GPIO and NON-GPIO mode in ADRV9009 0

94 views

3 replies
on 5 Oct 2020
by srimoyi
Not Answered

Does ADRV9009 support external FM local oscillator input? If so, what is the locking time when passing through the PLL 0

45 views

3 replies
on 1 Oct 2020
by srimoyi
Not Answered

There is a clutter signal of -34.07dbm at the -122.88MHz frequency 。 0

36 views

1 reply
on 28 Sep 2020
by srimoyi
Suggested Answer

One of four rx channels of two adrv9009s on one ZCU102 works badly, How? +1

519 views

20 replies
on 28 Sep 2020
by srimoyi
Not Answered

9008-2 RF，In NCO mode, 9008-2 TX output signal power, can I use the TALISE_setTxAttenuation() API to set the signal power? 0

83 views

6 replies
on 25 Sep 2020
by srimoyi
Not Answered

AGC Settling time in ADRV9008-1 0

55 views

1 reply
on 21 Sep 2020
by PVALAVAN
Suggested Answer

9008-2 3.3v GPIO 0

84 views

2 replies

on 18 Sep 2020 by adi_9008_hyc