When I don't load a Profile I get this result.
But when I load profile: Tx_BW400_IR491p52_Rx_BW200_OR245p76_ORx_BW400_OR491p52_DC245p76.txt
Something strange happens with the receiver data, it appears on the second receiver as well. While this receiver input is 50 Ohm terminated.
When I use the latest git version (master-gfe2a4ee) on a ubuntu machine. The data comes in correctly.
The previous described problem only occur when I use the version (master-g76b8e59) compiled for windows…
Are you referring to the loading of FIR filter config file generated using filter wizard?
If so then can you share the text file that you have loaded?
What is the RX input power? Can you try reducing the input power and see if its the case of RX getting saturated,
I just loaded a default filter. Which is available in the IIO oscilloscope.
I use -10dBm input power. And tried reducing the input power, but i still see the interleaved signal.
What was the sampling rate you configured when you got the proper data?
Can you try increasing the number of samples while plotting the RX data and then capture?