We have checked the datasheet and user manual of ADRV9002 RF Transceiver Frequency hopping feature.
We want ADRV9002 Receiver / Transmitter Frequency hopping performance (Image rejection levels) similar to the attached ADRV9009 Transceiver IC for 500 Hops/Sec or above at frequency range of 30 to 1000MHz or nearby.
Also may I know the maximum frequency settling time during frequency hopping mode?
Note: This above ADRV9009 data is copied from your product highlight "Design Challenges for Aerospace and Defense SDR"
The latest version of the SDK and User Guide have some frequency hopping functionality implemented. in the user guide section on frequency hopping table 33 outlines the various modes and give rough…
I have received the question and am working on a response for you.
Our Frequency Hopping is still under development so unfortunately we do not have final data to publish yet.
Is there any tendative schedule for Frequency Hopping performance publish?
Our requirement is 500 & 1000 Hops/sec and we need the Rx image rejection, DC levels & Tx LOL levels during hopping.
The latest version of the SDK and User Guide have some frequency hopping functionality implemented. in the user guide section on frequency hopping table 33 outlines the various modes and give rough timings.
The current release supports frames that have a minimum duration of about 30 us, although future releases may see support for even shorter frames. The image rejection should be close to the initial calibration values. Although keep in mind the calibration is done not in exact frequency but in frequency "ranges". So the image rejection might be slightly worse.
The Frequency Hopping functionality is still being developed, and as such not all characterisation measurements have been completed yet. As more information is made available it will be conveyed to our customers.Regards
Is there any update about frequency hopping performance right now? Also what is the tentative release date for ADRV9002?