Design Support AD9361/AD9363/AD9364

This community is available for customers looking for support for the AD9361 and AD9364. The applications support for the AD9361 and AD9364 consists of the ADI evaluation hardware and software, the downloadable design file package, and an online community forum monitored and managed by an applications engineering response team.

GUIDELINES FOR TECHNICAL SUPPORT

All schematics, layout recommendations, and specifications in the design package have been verified and insure optimum performance from AD9361 and AD9364. Adherence to these specifications is necessary in order to achieve rated performance from your design.
AD9361 and AD9364 evaluation boards are fully characterized by ADI. If you encounter an issue with your design, you must be able to recreate the issue on the ADI evaluation platform.
Questions related to clarification of the content provided in the design file package should be posted on the community forum and will be addressed by the ADI response team. Questions outside of the scope of the design resources provided cannot be supported.

Design Support AD9361/AD9363/AD9364

GUIDELINES FOR TECHNICAL SUPPORT

AD9361 noise figure measurement 0

how do i setup AD9364-Z7020 with MATLAB 0

[AD9361] CP Over Range flag set for different TX LO Frequencies 0

AD9364/AD9363 power supply problem 0

AD9361 LVDS data constraints missing 0

AD9361 RX data error In RF loopback 0

AD9361 configuration 0

Where are registers in AD9364 documented? +1

PHASE NOISE SPECIFICATION FOR THE EXTERNAL CLOCK OF AD9364 +1

Center frequency offset between TX and RX in FMCOMMS5 causes unwanted envelope variation 0

AD9361 RX data error In RF loopback 0

Where are registers in AD9364 documented? +1

PHASE NOISE SPECIFICATION FOR THE EXTERNAL CLOCK OF AD9364 +1

1:4 Fanout Buffer 0

FMCOMMS5+ZYNQ3 unstable received baseband spectrum in qpsk Simulink example 0