Discover how DPSM can reduce development time; speed up troubleshooting/diagnostics by allowing designers to configure and manage ICs from a digital interface.
LTC4076
Production
The LTC4076 is a standalone linear charger that is capable of charging a single-cell Li-Ion battery from both wall adapter and USB inputs. The charger...
Datasheet
LTC4076 on Analog.com
LT1249
Production
The 8-pin LT1249 provides active power factor correction for universal offline power systems with very few external parts. By using fixed high frequency...
Datasheet
LT1249 on Analog.com
LTC1863
Production
The LTC1863/LTC1867 are pin-compatible, 8-channel 12-/16-bit A/D converters with serial I/O, and an internal reference. The ADCs typically draw only 1...
Datasheet
LTC1863 on Analog.com
LTC3204
Production
The LTC3204-3.3/LTC3204-5/LTC3204B-3.3/LTC3204B-5 are low noise, constant frequency (1.2MHz) switched capacitor voltage doublers. The LTC3204-3.3/ LTC3204B...
Datasheet
LTC3204 on Analog.com
LTC1859
Production
The LTC1857/LTC1858/LTC1859 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These SoftSpan™ ADCs can be software...
Datasheet
LTC1859 on Analog.com
LTC2320-14
Production
The LTC2320-14 is a low noise, high speed octal 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2320-14 on Analog.com
LTM9010-14
Production
The LTM9011-14/LTM9010-14/LTM9009-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9010-14 on Analog.com
LTC4265
Recommended for New Designs
The LTC4265 is a 3rd generation Powered Device (PD) Interface controller intended for IEEE 802.3at high power Power-over-Ethernet (PoE) applications up...
Datasheet
LTC4265 on Analog.com
LTC5542
Production
The LTC5542 is part of a family of high dynamic range, high gain, passive downconverting mixers covering the 600MHz to 4GHz frequency range. The LTC5542...
Datasheet
LTC5542 on Analog.com
LT3506
Production
The LT3506 is a dual current mode PWM step-down DC/DC converter with internal 2A power switches. Both converters are synchronized to a single oscillator...
Datasheet
LT3506 on Analog.com
LTC6563
Recommended for New Designs
The LTC6563 is a low-noise four-channel transimpedance amplifier (TIA) with 600MHz bandwidth. The LTC6563 TIA’s low noise, wide linear range, and low...
Datasheet
LTC6563 on Analog.com
LT1949-1
Obsolete
OBSOLETE PRODUCT: Data Sheet For Reference Only. Contact Analog Devices for Potential Replacement.
The LT1949-1 is a fixed frequency step-up DC/DC converter...
Datasheet
LT1949-1 on Analog.com
LT1395
Production
The LT1395/LT1396/LT1397 are single/dual/quad 400MHz current feedback amplifiers with an 800V/µs slew rate and the ability to drive up to 80mA of output...
Datasheet
LT1395 on Analog.com
LTC2863
Production
The LTC2862/LTC2863/LTC2864/LTC2865 are low power, 20Mbps or 250kbps RS485/RS422 transceivers operating on 3V to 5.5V supplies that feature ±60V overvoltage...
Datasheet
LTC2863 on Analog.com
LTC3623
Recommended for New Designs
TheLTC3623 is a high efficiency, monolithic synchronous buck regulator in which the output voltage is programmed with a single external resistor. The accurate...
Datasheet
LTC3623 on Analog.com
LTC3618
Recommended for New Designs
The LTC3618 is a dual synchronous step-down regulator using a current mode, constant-frequency architecture. It provides a complete DDR solution with an...
Datasheet
LTC3618 on Analog.com
LT1617
Production
The LT1617/LT1617-1 are micropower inverting DC/DC converters in a 5-lead SOT-23 package. The LT1617 is designed for higher power systems with a 350mA...
Datasheet
LT1617 on Analog.com
LT1793
Production
The LT1793 achieves a new standard of excellence in noise performance for a JFET op amp. For the first time low voltage noise (6nV/vHz) is simultaneously...
Datasheet
LT1793 on Analog.com
LTC2355-12
Production
The LTC2355-12/LTC2355-14 are 12-bit/14-bit, 3.5Msps serial ADCs with differential inputs. The devices draw only 5.5mA from a single 3.3V supply and come...
Datasheet
LTC2355-12 on Analog.com
LTC4282
Recommended for New Designs
The LTC4282 hot swap controller allows a board to be safely inserted and removed from a live backplane. Using one or more external N-channel pass transistors...
Datasheet
LTC4282 on Analog.com
LTC6433-15
Recommended for New Designs
The LTC6433-15 is a gain-block amplifier with excellent linearity at frequencies below 100kHz to beyond 1000MHz and with low associated output noise.
The...
Datasheet
LTC6433-15 on Analog.com
LTC3602
Production
The LTC3602 is a high efficiency, monolithic synchronous, step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates...
Datasheet
LTC3602 on Analog.com
LT1672
Last Time Buy
The LT1672/LT1673/LT1674 are ultralow power (IS = 2µA) decompensated (AV = 5) op amps with precision specifications. The extremely low supply current is...
Datasheet
LT1672 on Analog.com
LT5512
Production
The LT5512 is an active double-balanced mixer IC, optimized for high linearity HF, VHF and UHF applications. The IC includes an integrated LO buffer amplifi...
Datasheet
LT5512 on Analog.com
LT1721
Production
The LT1720/LT1721 are UltraFast™ dual/quad comparators optimized for single supply operation, with a supply voltage range of 2.7V to 6V. The input voltage...
Datasheet
LT1721 on Analog.com
LTC4068-4.2
Production
The LTC4068 is a complete constant-current/constantvoltage linear charger for single cell lithium-ion batteries. Its DFN package and low external component...
Datasheet
LTC4068-4.2 on Analog.com
LT1615
Production
The LT1615/LT1615-1 are micropower step-up DC/DC converters in a 5-lead low profile (1mm) ThinSOT package. The LT1615 is designed for higher power systems...
Datasheet
LT1615 on Analog.com
LTC3529
Recommended for New Designs
The LTC3529 is a 5V output, synchronous, fixed frequency step-up DC/DC converter optimized for USB On-The-Go (OTG) hosting applications. This compact USB...
Datasheet
LTC3529 on Analog.com
LT1332
Obsolete
The LT1332 is a 3-driver/5-receiver RS232 transceiver, designed to be used in conjunction with a switching regulator. The LT1332 shares the regulatorâ...
Datasheet
LT1332 on Analog.com
LTM4609
Recommended for New Designs
The LTM4609 is a high efficiency switching mode buckboost power supply. Included in the package are the switching controller, power FETs and support components...
Datasheet
LTM4609 on Analog.com
LTC2263-12
Production
The LTC2265-12/LTC2264-12/LTC2263-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2263-12 on Analog.com
LT3008
Recommended for New Designs
The LT3008 series are micropower, low dropout voltage (LDO) linear regulators. The devices supply 20mA output current with a dropout voltage of 300mV....
Datasheet
LT3008 on Analog.com
LTC2600
Production
The LTC2600/LTC2610/LTC2620 are octal 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP and 20-lead 4mm × 5mm...
LTC2600 on Analog.com
LT1846
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1846 family of control ICs contains all necessary circuitry...
Datasheet
LT1846 on Analog.com
LTC1479
Production
The LTC1479 is the “heart” of a total power management solution for single and dual battery notebook computers and other portable equipment. The LTC1479...
Datasheet
LTC1479 on Analog.com
LTC1421
Production
The LTC1421/LTC1421-2.5 are Hot Swap™ controllers that allow a board to be safely inserted and removed from a live backplane. Using external N-channel...
Datasheet
LTC1421 on Analog.com
LTC1872
Production
The LTC1872 is a constant frequency current mode step-up DC/DC controller providing excellent AC and DC load and line regulation. The device incorporates...
Datasheet
LTC1872 on Analog.com
LT1195
Last Time Buy
The LT1195 is a video operational amplifier optimized for operation on single 5V and ±5V supplies. Unlike many high speed amplifiers, the LT1195 features...
Datasheet
LT1195 on Analog.com
LTC2606
Production
The LTC2606/LTC2616/LTC2626 are single 16-, 14- and 12-bit, 2.7V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2606 on Analog.com
LTC2292
Production
The LTC2293/LTC2292/LTC2291 are 12-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2292 on Analog.com
LT8620
Recommended for New Designs
The LT8620 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that accepts a wide input voltage range up to...
LT8620 on Analog.com
LTC1040
Last Time Buy
The LTC1040 is a monolithic CMOS dual comparator manufactured using Analog Devices' enhanced
LTCMOS™ silicon gate process. Extremely low operating power...
Datasheet
LTC1040 on Analog.com
LT1612
Production
The LT1612 is an 800kHz, synchronous step-down DC/DC converter that operates from an input voltage as low as 2V. Internal 0.45Ohms switches deliver output...
Datasheet
LT1612 on Analog.com
LT4356-1
Recommended for New Designs
The LT4356 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles...
Datasheet
LT4356-1 on Analog.com
LT3097
Recommended for New Designs
The LT3097 is a dual, positive and negative, high-performance, low-dropout linear regulator featuring Analog Devices, Inc., ultralow noise and ultra-high...
Datasheet
LT3097 on Analog.com
LTC1165
Obsolete
The LTC1163/LTC1165 triple low voltage MOSFET drivers make it possible to switch supply or ground referenced loads hrough inexpensive, low RDS(ON) N-channel...
Datasheet
LTC1165 on Analog.com
LTC3889
Recommended for New Designs
The LTC3889 is a dual PolyPhase DC/DC synchronous step-down switching regulator controller with I2C-based PMBus compliant serial interface. This controller...
Datasheet
LTC3889 on Analog.com
LTC1535
Production
The LTC1535 is an isolated RS485 full-duplex differential line transceiver. Isolated RS485 is ideal for systems where the ground loop is broken to allow...
Datasheet
LTC1535 on Analog.com
LT4363
Recommended for New Designs
The LT4363 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, by controlling the gate of an...
Datasheet
LT4363 on Analog.com
LT1945
Production
The LT1945 is a dual micropower DC/DC converter in a 10-pin MSOP package. Each converter is designed with a 350mA current limit and an input voltage range...
Datasheet
LT1945 on Analog.com
LTC4219
Recommended for New Designs
The LTC4219 is an integrated solution for Hot Swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates...
Datasheet
LTC4219 on Analog.com
LTM4707
Production
The LTM4707 is a complete 16A step-down Silent
Switcher 3 power μModule® (power micromodule)
regulator in a tiny 6.25mm × 6.25mm × 5.07mm BGA
package...
Datasheet
LTM4707 on Analog.com
LT1011
Production
The LT1011 is a general purpose comparator with signi?cantly better input characteristics than the LM111. Although pin compatible with the LM111, it offers...
Datasheet
LT1011 on Analog.com
LTC6652
Production
The LTC6652 family of precision, low drift, low noise references is fully specified over the temperature range of –40°C to 125°C. High order curvature...
Datasheet
LTC6652 on Analog.com
LTC6227
Last Time Buy
The LTC6227 are very fast, low noise rail-to-rail output, unity gain stable single/dual op amps, with a gainbandwidth product of 420MHz and a slew rate...
Datasheet
LTC6227 on Analog.com
LTC7852
Recommended for New Designs
The LTC7852/LTC7852-1 is a six-phase, dual output current mode synchronous step-down switching regulator controller that works in conjunction with external...
Datasheet
LTC7852 on Analog.com
LTC3624
Recommended for New Designs
The LTC3624/LTC3624-2 is a high efficiency 17V, 2A synchronous monolithic step-down regulator. The switching frequency is fixed to 1MHz (LTC3624) or 2...
Datasheet
LTC3624 on Analog.com
LTC2619
Production
The LTC2609/LTC2619/LTC2629 are quad 16-, 14- and 12- bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 16-lead SSOP package. They have built-in...
Datasheet
LTC2619 on Analog.com
LTC2068
Recommended for New Designs
The LTC2066/LTC2067/LTC2068 are single, dual, and quad low power, zero-drift, 100kHz amplifiers. The LTC2066/LTC2067/LTC2068 enable high resolution measurement...
Datasheet
LTC2068 on Analog.com
LTC6908-1
Production
The LTC6908 is an easy-to-use precision oscillator that provides 2-outputs, shifted by either 180° or 90°. The oscillator frequency is programmed by a...
Datasheet
LTC6908-1 on Analog.com
LTC2184
Production
The LTC2185/LTC2184/LTC2183 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2184 on Analog.com
LT3972
Production
The LT3972 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 33V (62V Maximum). A high...
Datasheet
LT3972 on Analog.com
LTC3567
Production
The LTC3567 is a highly integrated power management and battery charger IC for Li-Ion/Polymer battery applications. It includes a high efficiency current...
Datasheet
LTC3567 on Analog.com
LT3014B
Recommended for New Designs
The LT3014B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 20mA of output current with a dropout voltage...
Datasheet
LT3014B on Analog.com
LTC1516
Production
The LTC1516 is a micropower charge pump DC/DC converter that produces a regulated 5V output from a 2V to 5V supply. Extremely low supply current (12µA...
Datasheet
LTC1516 on Analog.com
LT5527
Production
The LT5527 active mixer is optimized for high linearity, wide dynamic range downconverter applications. The IC includes a high speed differential LO buffer...
Datasheet
LT5527 on Analog.com
LTC4223
Recommended for New Designs
The LTC4223 positive voltage Hot Swap™ controller allows a board to be safely inserted and removed from a live AMC or MicroTCA backplane. It controls the...
Datasheet
LTC4223 on Analog.com
LT1884
Production
The LT1884/LT1885 op amps bring high accuracy input performance to amplifiers with rail-to-rail output swing while providing faster response than other...
Datasheet
LT1884 on Analog.com
LTC6417
Recommended for New Designs
The LTC6417 is a differential unity gain buffer that can drive a 50O load with extremely low noise and excellent linearity. It is well suited for driving...
Datasheet
LTC6417 on Analog.com
LTC7820
Recommended for New Designs
The LTC7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers...
Datasheet
LTC7820 on Analog.com
LT1106
Obsolete
Obsolete - Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1106 is the industry’s first DC/DC converter...
Datasheet
LT1106 on Analog.com
LTC1060
Production
The LTC1060 consists of two high performance, switched capacitor filters. Each filter, together with 2 to 5 resistors, can produce various 2nd order filter...
Datasheet
LTC1060 on Analog.com
LTC4007
Production
The LTC4007 is a complete constant-current/constant-voltage charger controller for 3- or 4-cell lithium-ion batteries. The PWM controller uses a synchronous...
Datasheet
LTC4007 on Analog.com
LTC4300A-3
Production
The LTC4300A-3 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When the...
Datasheet
LTC4300A-3 on Analog.com
LTC4077
Production
The LTC4077 is a standalone linear charger that is capable of charging a single-cell Li-Ion battery from both wall adapter and USB inputs. The charger...
Datasheet
LTC4077 on Analog.com
LTC2451
Production
The LTC2451 is an ultra-tiny, 16-bit, analog-to-digital converter. The LTC2451 uses a single 2.7V to 5.5V supply, accepts a single-ended analog input voltage...
Datasheet
LTC2451 on Analog.com
LTC6602
Recommended for New Designs
The LTC6602 is a dual, matched, programmable bandpass or lowpass filter and differential driver. The selectivity of the LTC6602, combined with its phase...
Datasheet
LTC6602 on Analog.com
LTC2872
Production
The LTC2872 is a robust pin-configurable transceiver that supports RS232, RS485, and RS422 standards while operating on a single 3V to 5.5V supply. The...
Datasheet
LTC2872 on Analog.com
LT8374
Pre release
The LT8374/LT8374-1 is a high efficiency, monolithic, synchronous step-down DC/DC converter with fixed-frequency and peak current control. The LED current...
Datasheet
LT8374 on Analog.com
LTM4624
Recommended for New Designs
The LTM4624 is a complete 4A step-down switching mode µModule® (micromodule) regulator in a tiny 6.25mm × 6.25mm × 5.01mm BGA package. Included in the...
Datasheet
LTM4624 on Analog.com
LTC6247
Last Time Buy
The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA...
LTC6247 on Analog.com
LTC3728L-1
Production
The LTC3728L-1 is a dual high performance step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3728L-1 on Analog.com
LTC4307-1
Production
The LTC4307-1 is a 2-wire bus buffer that provides capacitance buffering between input and output. The HDMI specification requires that devices have less...
Datasheet
LTC4307-1 on Analog.com
LTC2801
Production
The LTC2801/LTC2802/LTC2803/LTC2804 are single and dual RS-232 transceivers in narrow SSOP and chip-scale DFN packages. All operate over a supply range...
Datasheet
LTC2801 on Analog.com
LTC3888
Recommended for New Designs
The LTC3888/LTC3888-1/LTC3888-2 is a PMBus-compliant dual loop DC/DC synchronous step-down switching regulator controller with eight expandable phases...
Datasheet
LTC3888 on Analog.com
LT1015
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1015 is a dual high speed comparator intended for line...
Datasheet
LT1015 on Analog.com
LTC201A
Production
The LTC201A, LTC202, and LTC203 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single...
Datasheet
LTC201A on Analog.com
LTC3789
Recommended for New Designs
The LTC3789 is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3789 on Analog.com
LT3752
Recommended for New Designs
The LT3752/LT3752-1 are current mode PWM controllers optimized for an active clamp forward converter topology. A DC/DC housekeeping controller is included...
Datasheet
LT3752 on Analog.com
LTC2140-14
Production
The LTC2142-14/LTC2141-14/LTC2140-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2140-14 on Analog.com
LTC2959
Recommended for New Designs
The LTC2959 is an ultra-low power battery gas gauge that accurately measures charge, voltage, current and temperature. Its wide input voltage range and...
Datasheet
LTC2959 on Analog.com
LTC7812
Recommended for New Designs
The LTC7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains...
Datasheet
LTC7812 on Analog.com
LT8608S
Recommended for New Designs
The LT8608S is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7μA of quiescent current...
Datasheet
LT8608S on Analog.com
LTC1147
Production
The LTC1147 series are step-down switching regulator controllers featuring automatic BurstMode™ operation to maintain high efficiencies at low output currents...
Datasheet
LTC1147 on Analog.com
LTC2688
Recommended for New Designs
The LTC2688 is a 16-channel,12-/16-bit, ±15 V digital-to-analog converter (DAC) with an integrated precision reference. The LTC2688 is guaranteed monotonic...
Datasheet
LTC2688 on Analog.com
LTM4680
Recommended for New Designs
The LTM4680 is a dual 30A or single 60A step-down µModule® (power module) DC/DC regulator featuring remote configurability and telemetry-monitoring of...
Datasheet
LTM4680 on Analog.com
LTC3205
Production
The LTC3205 is a highly integrated multidisplay LED controller. The part contains a high efficiency, low noise fractional step-up/step-down charge pump...
Datasheet
LTC3205 on Analog.com
LTC1164-8
Obsolete
The LTC1164-8 is a monolithic ultraselective, 8th order, elliptic bandpass filter. The passband of the LTC1164-8 is tuned with an external clock and the...
Datasheet
LTC1164-8 on Analog.com
LTC1481
Production
The LTC1481 is an ultralow power differential line transceiver designed for data transmission standard RS485 applications. It will also meet the requirements...
Datasheet
LTC1481 on Analog.com
LTC2666
Production
The LTC2666 is a family of 8-channel, 16-/12-bit ±10V digital-to-analog converters with integrated precision references. They are guaranteed monotonic...
Datasheet
LTC2666 on Analog.com
LTC2877
Production
The LTC2876 and LTC2877 are PROFIBUS RS485 transceivers designed to meet the test specifications for PROFIBUS-DP masters and PROFIBUS-DP slaves, fully...
Datasheet
LTC2877 on Analog.com
LTC4450
Recommended for New Designs
The LTC4450 is a high performance Schottky diode replacement using an integrated N-Channel power MOSFET. It easily ORs power supplies together to increase...
Datasheet
LTC4450 on Analog.com
LTC2051
Production
The LTC2051/LTC2052 are dual/quad zero-drift operational amplifiers available in the MS8 and SO-8/GN16 and S14 packages. For space limited applications...
Datasheet
LTC2051 on Analog.com
LTC1541
Production
The LTC1541/LTC1542 combine a micropower amplifier, comparator and bandgap reference (LTC1541) in an 8-pin package. The part operates from a single 2.5V...
Datasheet
LTC1541 on Analog.com
LT1101
Production
The LT1101 establishes the following milestones: (1) It is the first micropower instrumentation amplifier, (2) It is the first single supply instrumentation...
Datasheet
LT1101 on Analog.com
LTC2439-1
Production
The LTC2439-1 is a 16-channel (8-differential) micropower 16-bit ?S analog-to-digital converter. It operates from 2.7V to 5.5V and includes an integrated...
Datasheet
LTC2439-1 on Analog.com
LTC3526L-2
Recommended for New Designs
The LTC3526L-2/LTC3526LB-2 are synchronous, fixed frequency step-up DC/DC converters with output disconnect. Synchronous rectification enables high efficiency...
Datasheet
LTC3526L-2 on Analog.com
LTC2851
Production
The LTC2850, LTC2851 and LTC2852 are low power, 20Mbps RS485/RS422 transceivers operating on 3.3V supplies. The receiver has a one-eighth unit load supporting...
Datasheet
LTC2851 on Analog.com
LT1512
Production
The LT1512 is a 500kHz current mode switching regulator specially configured to create a constant-current/constant-voltage battery charger. In addition...
Datasheet
LT1512 on Analog.com
LTC4291-1
Recommended for New Designs
The LTC4291-1 / LTC4292 chipset is a 4-port power
sourcing equipment (PSE) controller designed for use in
IEEE 802.3bt Type 3 and 4 compliant Power over...
Datasheet
LTC4291-1 on Analog.com
LTC1442
Production
The LTC1442 is an ultralow power dual comparator with a built-in voltage reference. The comparators feature less than 5.7µA supply current over temperature...
Datasheet
LTC1442 on Analog.com
LTC1277
Production
The LTC1274/LTC1277 are 8µs sampling 12-bit A/D converters which draw only 2mA (typ) from single 5V or ±5V supplies. These easy-to-use devices come complete...
Datasheet
LTC1277 on Analog.com
LTC1966
Production
The LTC1966 is a true RMS-to-DC converter that utilizes an innovative patented ?S computational technique. The internal delta sigma circuitry of the LTC1966...
Datasheet
LTC1966 on Analog.com
LTC2050HV
Recommended for New Designs
The LTC2050 and LTC2050HV are zero-drift operational amplifiers available in the 5- or 6-lead SOT-23 and SO-8 packages. The LTC2050 operates from a single...
Datasheet
LTC2050HV on Analog.com
LTC2947
Recommended for New Designs
The LTC2947 is a high-precision power and energy monitor with an internal sense resistor supporting up to ±30A. Three internal No Latency ΔΣ™ ADCs...
Datasheet
LTC2947 on Analog.com
LT8306
Recommended for New Designs
The LT8306 is a micropower isolated flyback controller in a 6-lead ThinSOTâ„¢ package. By sampling the isolated output voltage directly from the primary...
Datasheet
LT8306 on Analog.com
LT1358
Production
The LT1358/LT1359 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1358 on Analog.com
LTC6410-6
Recommended for New Designs
The LTC6410-6 is a low distortion, low noise differential IF amplifier with configurable input impedance designed for use in applications from DC to 1...
Datasheet
LTC6410-6 on Analog.com
LTC4444-5
Production
The LTC4444-5 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a synchronous DC/DC converter with supply voltages up to...
Datasheet
LTC4444-5 on Analog.com
LTC2265-14
Production
The LTC2265-14/LTC2264-14/LTC2263-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2265-14 on Analog.com
LT4422
Recommended for New Designs
The LT®4422 is an ideal 1.9V to 28V diode with integrated
P-channel MOSFET. When enabled, 15mV forward
voltage regulation minimizes power dissipation...
Datasheet
LT4422 on Analog.com
LT8376
Recommended for New Designs
The LT8376 is a monolithic, synchronous, step-down DC/DC converter that utilizes fixed-frequency, peak current control and provides PWM dimming for a string...
Datasheet
LT8376 on Analog.com
LTC4101
Obsolete
The LTC4101 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS compliant system. The LTC4101...
Datasheet
LTC4101 on Analog.com
LTC1928-5
Production
The LTC1928-5 is a doubler charge pump with an internal low noise, low dropout (LDO) linear regulator. The part is designed to provide a low noise boosted...
Datasheet
LTC1928-5 on Analog.com
LTC2180
Production
The LTC2182/LTC2181/LTC2180 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2180 on Analog.com
LT1521
Production
The LT1521/LT1521-3/LT1521-3.3/LT1521-5 are low dropout regulators with micropower quiescent current and shutdown. These devices are capable of supplying...
Datasheet
LT1521 on Analog.com
LTC4089
Production
The LTC4089/LTC4089-5 are USB power managers plus high voltage Li-Ion battery chargers. These devices control the total current used by the USB peripheral...
Datasheet
LTC4089 on Analog.com
LT3690
Production
The LT®3690 is an adjustable frequency monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 90mO switch is included...
Datasheet
LT3690 on Analog.com
LTC5567
Production
The LTC5567 is optimized for RF downconverting mixer applications that require wide IF bandwidth. The part is also a pin-compatible upgrade to the LT5557...
Datasheet
LTC5567 on Analog.com
LT1260
Production
The LT1259 contains two independent 130MHz current feedback amplifiers, each with a shutdown pin. These amplifiers are designed for excellent linearity...
Datasheet
LT1260 on Analog.com
LTC1151
Production
The LTC1151 is a high voltage, high performance dual zero-drift operational amplifier. The two sample-and-hold capacitors per amplifier required externally...
Datasheet
LTC1151 on Analog.com
LT1020
Not Recommended for New Designs
The LT1020 is a combination micropower positive regulator and free collector comparator on a single monolithic chip. With only 40µA supply current, the...
Datasheet
LT1020 on Analog.com
LTC5564
Production
The LTC5564 is a precision, RF power detector for applications in the 600MHz to 15GHz frequency range. The LTC5564 operates with input power levels from...
Datasheet
LTC5564 on Analog.com
LTC1522
Production
The LTC1522 is a micropower charge pump DC/DC converter that produces a regulated 5V output from a 2.7V to 5V input supply. Extremely low supply current...
Datasheet
LTC1522 on Analog.com
LTC3876
Recommended for New Designs
The LTC3876 is a complete DDR power solution, compatible with DDR1, DDR2, DDR3 and future DDRX lower voltage standards. The LTC3876 includes VDDQ and VTT...
Datasheet
LTC3876 on Analog.com
LTC1485
Production
The LTC1485 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common...
Datasheet
LTC1485 on Analog.com
LTC1472
Production
The LTC1472 switching matrix routes power to both the VCC and VPP power supply pins of the PCMCIA compatible card socket. The VCC output of the LTC1472...
Datasheet
LTC1472 on Analog.com
LTC3872-1
Recommended for New Designs
The LTC3872-1 is a constant frequency current mode boost DC/DC controller that drives an N-channel power MOSFET and requires very few external components...
Datasheet
LTC3872-1 on Analog.com
LTC7000A
Recommended for New Designs
The LTC7000A/LTC7000A-1 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 135V. It contains an internal charge pump...
Datasheet
LTC7000A on Analog.com
LTC2803
Production
The LTC2801/LTC2802/LTC2803/LTC2804 are single and dual RS-232 transceivers in narrow SSOP and chip-scale DFN packages. All operate over a supply range...
Datasheet
LTC2803 on Analog.com
LT8624S
Recommended for New Designs
The LT®8622S/LT®8624S synchronous step-down regulator features third-generation Silent Switcher technology, which is uniquely designed to combine an...
Datasheet
LT8624S on Analog.com
LT1246
Production
The LT1246/LT1247 are 8-pin, fixed frequency, current mode, pulse width modulators. These devices are designed to be improved plug compatible versions...
Datasheet
LT1246 on Analog.com
LT1803
Production
The LT1803/LT1804/LT1805 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT1803 on Analog.com
LTC3405A-1.8
Production
The LTC3405A-1.5/LTC3405A-1.8 are high efficiency monolithic synchronous buck regulators using a constant frequency, current mode architecture. Supply...
Datasheet
LTC3405A-1.8 on Analog.com
LTC2916
Production
The LTC2915/LTC2916 are low voltage single-supply monitors with selectable thresholds. The parts operate from 1.5V to 5.5V and consume a quiescent current...
Datasheet
LTC2916 on Analog.com
LT3470A
Production
The LT3470A is a micropower step-down DC/DC converter that integrates a 440mA power switch, catch diode and boost diode into low profile 2mm × 3mm DFN...
Datasheet
LT3470A on Analog.com
LTC4302
Production
The LTC4302-1/LTC4302-2 addressable I2C bus and SMBus compatible bus buffers allow a peripheral board to be inserted and removed from a live backplane...
Datasheet
LTC4302 on Analog.com
LTC3874-1
Recommended for New Designs
The LTC3874-1 is a dual PolyPhase® current mode synchronous step-down slave controller. It enables high current, multiphase applications when paired with...
Datasheet
LTC3874-1 on Analog.com
LTC4364
Recommended for New Designs
The LTC4364 surge stopper with ideal diode controller protects loads from high voltage transients. It limits and regulates the output during an overvoltage...
Datasheet
LTC4364 on Analog.com
LTC4357
Recommended for New Designs
The LTC4357 is a positive high voltage ideal diode controller that drives an external N-channel MOSFET to replace a Schottky diode. When used in diode...
Datasheet
LTC4357 on Analog.com
LTM4632
Recommended for New Designs
The LTM4632 is an ultrathin triple output step-down µModule® (power module) regulator to provide complete power solution for DDR-QDR4 SRAM. Operating from...
Datasheet
LTM4632 on Analog.com
LTC1092
Production
The high impedance analog inputs and the ability to operate with reduced spans (below 1V full scale) allow direct connection to sensors and transducers...
Datasheet
LTC1092 on Analog.com
LTM4639
Recommended for New Designs
The LTM4639 is a complete 20A output high efficiency switch mode step-down DC/DC µModule (power module) regulator. Included in the package are the switching...
Datasheet
LTM4639 on Analog.com
LTC2977
Recommended for New Designs
The LTC2977 is an 8-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2977 on Analog.com
LTC1348
Production
The LTC1348 is a 3-driver/5-receiver RS232 transceiver with very low supply current. The charge pump only requires five 0.1
µF capacitors. The LTC1348...
Datasheet
LTC1348 on Analog.com
LTC4366
Recommended for New Designs
The LTC4366 surge stopper protects loads from high voltage transients. By controlling the gate of an external N-channel MOSFET, the LTC4366 regulates the...
Datasheet
LTC4366 on Analog.com
LTC1314
Production
The LTC1314/LTC1315 provide the power switching necessary to control Personal Computer Memory Card International Association (PCMCIA) Release 2.0 card...
Datasheet
LTC1314 on Analog.com
LT1964
Recommended for New Designs
The LT1964 is a micropower low noise, low dropout negative regulator. The device is capable of supplying 200mA of output current with a dropout voltage...
Datasheet
LT1964 on Analog.com
LTC1967
Production
The LTC1967 is a true RMS-to-DC converter that uses an innovative delta-sigma computational technique. The benefits of the LTC1967 proprietary architecture...
Datasheet
LTC1967 on Analog.com
LTC3834
Production
The LTC3834 is a high performance step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A constant-frequency...
Datasheet
LTC3834 on Analog.com
LT1510
Production
With switching frequency as high as 500kHz, The LT1510 current mode PWM battery charger is the smallest, simplest, most efficient solution to fast-charge...
Datasheet
LT1510 on Analog.com
LTC3542
Production
The LTC3542 is a high efficiency monolithic synchronous buck converter using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC3542 on Analog.com
LTC4267-1
Production
The LTC4267-1 combines an IEEE 802.3af compliant Powered Device (PD) interface with a current mode switching regulator, providing a complete power solution...
Datasheet
LTC4267-1 on Analog.com
LTC699
Production
The LTC699 provides power supply monitoring for microprocessor-based systems. The features include microprocessor reset and watchdog timing. Precise internal...
Datasheet
LTC699 on Analog.com
LT3012
Recommended for New Designs
The LT3012 is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage...
Datasheet
LT3012 on Analog.com
LT1500
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1500 is an adaptive-frequency current mode step-up switching...
Datasheet
LT1500 on Analog.com
LT5557
Production
The LT5557 active mixer is optimized for high linearity, wide dynamic range downconverter applications. The IC includes a high speed differential LO buffer...
Datasheet
LT5557 on Analog.com
LTC2452
Production
The LTC2452 is an ultra-tiny, fully differential, 16-bit, analog-to-digital converter. The LTC2452 uses a single 2.7V to 5.5V supply and communicates through...
Datasheet
LTC2452 on Analog.com
LTC2226H
Production
The LTC2226H is a 12-bit 25Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2226H is perfect...
Datasheet
LTC2226H on Analog.com
LT3755
Production
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low...
Datasheet
LT3755 on Analog.com
LTC2401
Production
The LTC2401/LTC2402 are 1- and 2-channel 2.7V to 5.5V micropower 24-bit analog-to-digital converters with an integrated oscillator, 4ppm INL and 0.6ppm...
Datasheet
LTC2401 on Analog.com
LT3029
Recommended for New Designs
The LT3029 is a dual, micropower, low noise, low dropout linear regulator. The device operates either with a common input supply or independent input supplies...
Datasheet
LT3029 on Analog.com
LTC1726
Production
The LTC1726 is a triple supply monitor and microprocessor supervisory circuit with adjustable reset and watchdog functions intended for systems with multiple...
Datasheet
LTC1726 on Analog.com
LTC1771
Production
The LTC1771 is a high efficiency current mode step-down DC/DC controller that draws as little as 10µA DC supply current to regulate the output at no load...
Datasheet
LTC1771 on Analog.com
LTC1047
Production
The LTC1047 is a micropower, high performance dual zero-drift operational amplifier. The sample-and-hold capacitors usually required by other chopper amplifiers...
Datasheet
LTC1047 on Analog.com
LTC2922
Recommended for New Designs
The LTC2921 and LTC2922 monitor up to five supplies and force them to track on power-up in multiple supply systems. Using external N-channel pass transistors...
Datasheet
LTC2922 on Analog.com
LTC9101-3
Recommended for New Designs
The LTC9101-3/LTC9103 chipset is a 8/16-port power sourcing equipment (PSE) controller and power manager designed for use in IEEE 802.3at compliant Power...
Datasheet
LTC9101-3 on Analog.com
LTC2946
Recommended for New Designs
The LTC2946 is a rail-to-rail system monitor that measures current, voltage, power, charge and energy. It features an operating range of 2.7V to 100V and...
Datasheet
LTC2946 on Analog.com
LTC4080X
Production
The LTC4080X is a complete constant-current/constant-voltage linear battery charger for a single-cell 4.2V lithium-ion/polymer battery with an integrated...
Datasheet
LTC4080X on Analog.com
LT1175
Production
The LT1175 is a negative micropower low dropout regulator. It features 45µA quiescent current, dropping to 10µA in shutdown. A new reference amplifier...
Datasheet
LT1175 on Analog.com
LTC1520
Production
The LTC1520 is a high speed, precision differential line receiver that can operate at data rates as high as 50Mbps. A unique architecture provides very...
Datasheet
LTC1520 on Analog.com
LT8386
Recommended for New Designs
The LT8386 is a monolithic, synchronous, step-up DC-to-DC converter that utilizes fixed frequency, peak current control and provides PWM dimming for a...
Datasheet
LT8386 on Analog.com
LT3799
Production
The LT3799 is an isolated flyback controller with power factor correction specifically designed for driving LEDs. The controller operates using critical...
Datasheet
LT3799 on Analog.com
LT8653S
Recommended for New Designs
The LT8653S is a dual step-down regulator that delivers up to 2A of continuous current from both channels and supports loads up to 3A from each channel...
Datasheet
LT8653S on Analog.com
LT3956
Production
The LT3956 is a DC/DC converter designed to operate as a constant-current source and constant-voltage regulator. It is ideally suited for driving high...
Datasheet
LT3956 on Analog.com
LT1312
Obsolete
Obsolete - Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1312 is a member of the Analog Devices family...
Datasheet
LT1312 on Analog.com
LT1993-2
Not Recommended for New Designs
The LT1993-2 is a low distortion, low noise Differential Ampli?er/ADC driver for use in applications from DC to 800MHz. The LT1993-2 has been designed...
Datasheet
LT1993-2 on Analog.com
LTC4221
Recommended for New Designs
The LTC4221 is a 2-channel Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Using two independent high...
Datasheet
LTC4221 on Analog.com
LT6656
Production
The LT6656 is a tiny precision voltage reference that draws less than 1µA of supply current and can operate with a supply voltage within 10mV of the output...
Datasheet
LT6656 on Analog.com
LTC1292
Production
The LTC1292/LTC1297 are data acquisition systems that contain a 12-bit, switched-capacitor successive approximation A/D, a differential input, sample-and...
Datasheet
LTC1292 on Analog.com
LT3494
Production
The LT3494/LT3494A are low noise boost converters with integrated power switch, Schottky diode and output disconnect circuitry. The parts use a novel*...
Datasheet
LT3494 on Analog.com
LTC3620
Production
The LTC3620 is a high efficiency, synchronous buck regulator, suitable for very low power, very small footprint applications powered by a single Li-Ion...
Datasheet
LTC3620 on Analog.com
LTC2757
Production
The LTC2757 is an 18-bit multiplying parallel-input, current-output digital-to-analog converter that provides full 18-bit performance—INL and DNL of ±1LSB...
Datasheet
LTC2757 on Analog.com
LT1641-1
Production
The LT1641-1/LT1641-2 are 8-pin Hot Swap™ controllers that allow a board to be safely inserted and removed from a live backplane. Using an external N-channel...
Datasheet
LT1641-1 on Analog.com
LTC2629
Production
The LTC2609/LTC2619/LTC2629 are quad 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 16-lead SSOP package. They have built-in high...
Datasheet
LTC2629 on Analog.com
LTC3111
Recommended for New Designs
The LTC3111 is a fixed frequency, synchronous buckboost DC/DC converter with an extended input and output range. The unique 4-switch, single inductor architecture...
Datasheet
LTC3111 on Analog.com
LTC2378-16
Production
The LTC2378-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2378-16 has...
Datasheet
LTC2378-16 on Analog.com
LTC3729L-6
Production
The LTC3729L-6 is a PolyPhaseâ„¢ synchronous stepdown current mode switching regulator controller with a 0.6V reference that drives N-channel external...
Datasheet
LTC3729L-6 on Analog.com
LT6600-15
Production
The LT6600-15 combines a fully differential amplifier with a 4th order 15MHz lowpass filter approximating a Chebyshev frequency response. Most differential...
Datasheet
LT6600-15 on Analog.com
LT6700
Production
The LT6700/LT6700HV combine two micropower, low voltage comparators with a 400mV reference in a 6-lead SOT-23 or tiny DFN package. Operating with supplies...
Datasheet
LT6700 on Analog.com
LTC692
Production
The LTC692/LTC693 provide complete power supply monitoring and battery control functions for microprocessor reset, battery backup, CMOS RAM write protection...
Datasheet
LTC692 on Analog.com
LTC4126
Recommended for New Designs
The LTC4126 is a low-power wireless single-cell Li-Ion battery charger with an integrated step-down DC/DC regulator. The step-down regulator is a low-noise...
Datasheet
LTC4126 on Analog.com
LT1940
Production
The LT1940 is a dual current mode PWM step-down DC/DC converter with internal 2A power switches. Both converters are synchronized to a single 1.1MHz oscillator...
Datasheet
LT1940 on Analog.com
LT8613
Recommended for New Designs
The LT8613 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 3µA of quiescent current....
Datasheet
LT8613 on Analog.com
LTC2310-14
Production
The LTC2310-14 is a low noise, high speed 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2310-14 on Analog.com
LTC3553
Recommended for New Designs
The LTC3553 is a micropower, highly integrated power management and battery charger IC for single-cell Li-Ion/Polymer battery applications. It includes...
Datasheet
LTC3553 on Analog.com
LT1817
Last Time Buy
The LT1815/LT1816/LT1817 are low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1815/LT1816/LT1817...
Datasheet
LT1817 on Analog.com
LTC4415
Recommended for New Designs
The LTC4415 contains two monolithic PowerPath ideal diodes, each capable of supplying up to 4A with typical forward conduction resistance of 50mO. The...
Datasheet
LTC4415 on Analog.com
LTM4644
Recommended for New Designs
The LTM4644/LTM4644-1 is a quad DC/DC step-down µModule (micromodule) regulator with 4A per output. Outputs can be paralleled in an array for up to 16A...
Datasheet
LTM4644 on Analog.com
LTC3522
Recommended for New Designs
The LTC3522 combines a 400mA buck-boost DC/DC converter with a 200mA synchronous buck DC/DC converter in a tiny 3mm × 3mm package. The 1MHz switching frequency...
Datasheet
LTC3522 on Analog.com
LT3001
Recommended for New Designs
The LT3001 is a micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part...
Datasheet
LT3001 on Analog.com
LTM2173-14
Recommended for New Designs
The LTM2173-14 is a 4-channel, simultaneous sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. AC performance...
Datasheet
LTM2173-14 on Analog.com
LTC4257-1
Recommended for New Designs
The LTC4257-1 provides complete signature and power interface functions for a device operating in an IEEE 802.3af Power over Ethernet (PoE) system. The...
Datasheet
LTC4257-1 on Analog.com
LTC3412
Production
The LTC3412 is a high efficiency monolithic synchronous, step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3412 on Analog.com
LTC3119
Recommended for New Designs
The LTC3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration...
Datasheet
LTC3119 on Analog.com
LT6000
Recommended for New Designs
The LT6000/LT6001/LT6002 are single, dual and quad precision rail-to-rail input and output operational amplifiers. Designed to maximize battery life in...
Datasheet
LT6000 on Analog.com
LT1719
Production
The LT1719 is an UltraFast™ comparator optimized for low voltage operation. The input voltage range extends from 100mV below VEE to 1.2V below VCC. Internal...
Datasheet
LT1719 on Analog.com
LTC3839
Recommended for New Designs
The LTC3839 is a 2-phase, single-output PolyPhase® synchronous step-down switching regulator controller that drives all N-channel power MOSFETs. The controlled...
Datasheet
LTC3839 on Analog.com
LTC1760
Production
The LTC1760 Smart Battery System Manager is a highly-integrated SMBus Level 3 battery charger and selector intended for products using dual smart batteries...
Datasheet
LTC1760 on Analog.com
LTC4269-1
Recommended for New Designs
The LTC4269-1 is an integrated Powered Device (PD) controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications. The...
Datasheet
LTC4269-1 on Analog.com
LT3650-4.1
Production
The LT3650 is a complete monolithic single-cell Li-Ion/Polymer battery charger that operates over a 4.75V to 32V input voltage range (7.5V minimum start...
Datasheet
LT3650-4.1 on Analog.com
LTC4402
Obsolete
The LTC4402-2 is a multiband RF power controller for RF power amplifiers operating in the 300MHz to 2.4GHz range. The LTC4402-2 has two outputs to control...
Datasheet
LTC4402 on Analog.com
LTM8001
Recommended for New Designs
The LTM8001 is a 36VIN, 5A step-down µModule® regulator with a 5-output configurable LDO array. Operating over an input voltage range of 6V to 36V, the...
Datasheet
LTM8001 on Analog.com
LTC3622
Recommended for New Designs
The LTC3622 is a dual 1A output, high efficiency synchronous monolithic step-down regulator capable of operating from input supplies up to 17V. The switching...
Datasheet
LTC3622 on Analog.com
LT1933
Production
The LT1933 is a current mode PWM step-down DC/DC converter with an internal 0.75A power switch, packaged in a tiny 6-lead SOT-23. The wide input range...
Datasheet
LT1933 on Analog.com
LTC2368-16
Production
The LTC2368-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2368-16 has...
Datasheet
LTC2368-16 on Analog.com
LT3511
Production
The LT3511 is a high voltage monolithic switching regulator specifically designed for the isolated flyback topology. No third winding or opto-isolator...
Datasheet
LT3511 on Analog.com
LT6600-5
Production
The LT6600-5 combines a fully differential amplifier with a 4th order 5MHz lowpass filter approximating a Chebyshev frequency response. Most differential...
Datasheet
LT6600-5 on Analog.com
LTC1326
Production
The LTC1326/LTC1326-2.5 are triple supply monitors intended for systems with multiple supply voltages. They provide micropower operation, small size and...
Datasheet
LTC1326 on Analog.com
LTC1144
Production
The LTC1144 is a monolithic CMOS switched-capacitor voltage converter. It performs supply voltage conversion from positive to negative from an input range...
Datasheet
LTC1144 on Analog.com
LTC4006
Production
The LTC4006 is a complete constant-current/constant voltage charger controller for 2-, 3- or 4-cell lithium batteries in a small package using few external...
Datasheet
LTC4006 on Analog.com
LT1587-1.5
Production
The LT1587-1.5 is a low dropout 3-terminal regulator with a fixed 1.5V output voltage and 3A output current capability. The design is optimized for low...
Datasheet
LT1587-1.5 on Analog.com
LTC3527
Production
The LTC3527/LTC3527-1 are dual high efficiency, step-up DC/DC converters in a space saving 16-lead 3mm × 3mm QFN package. Battery life is maximized with...
Datasheet
LTC3527 on Analog.com
LTC3852
Recommended for New Designs
The LTC3852 is a constant frequency, current mode step-down DC/DC controller which can be powered by an on-board charge pump. Input supplies as low as...
Datasheet
LTC3852 on Analog.com
LT1886
Production
The LT1886 is a 200mA minimum output current dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily...
Datasheet
LT1886 on Analog.com
LTC6906
Production
The LTC6906 is a precision programmable oscillator that is versatile, compact and easy-to-use. Micropower operation benefits portable and battery-powered...
Datasheet
LTC6906 on Analog.com
LTC3126
Recommended for New Designs
The LTC3126 is a high efficiency synchronous buck converter with an internal no-loss PowerPath™ supporting seamless operation from two separate input power...
Datasheet
LTC3126 on Analog.com
LT8722
Recommended for New Designs
The LT8722 is a high performance, high efficiency, monolithic full bridge DC/DC converter. One side of the full bridge is driven by a pulse width modulation...
Datasheet
LT8722 on Analog.com
LTC1473L
Production
The LTC1473L provides reliable and efficient switching between two DC power sources. This device drives two external sets of back-to-back N-channel MOSFET...
Datasheet
LTC1473L on Analog.com
LTC6409
Recommended for New Designs
The LTC6409 is a very high speed, low distortion, differential amplifier. Its input common mode range includes ground, so that a ground-referenced input...
LTC6409 on Analog.com
LT1269
Production
The LT1271 and LT1269 are monolithic high power switching regulators. Identical to the popular LT1070, except for switching frequency (LT1271 = 60kHz,...
Datasheet
LT1269 on Analog.com
LTC490
Production
The LTC490 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common...
Datasheet
LTC490 on Analog.com
LTC2926
Recommended for New Designs
The LTC2926 provides a simple solution for tracking and sequencing up to three power supply rails. An N-channel MOSFET and a few resistors per channel...
Datasheet
LTC2926 on Analog.com
LTC3423
Production
The LTC3423 and LTC3424 are high efficiency, fixed frequency, step-up DC/DC converters that can regulate output voltages as low as 1.5V from a single cell...
Datasheet
LTC3423 on Analog.com
LT1217
Production
The LT1217 is a 10MHz current feedback amplifier with DC characteristics better than many voltage feedback amplifiers. This versatile amplifier is fast...
Datasheet
LT1217 on Analog.com
LTC1198
Production
The LTC1196/LTC1198 are 600ns, 8-bit A/D converters with sampling rates up to 1MHz. They are offered in 8-pin SO packages and operate on 3V to 6V supplies...
Datasheet
LTC1198 on Analog.com
LT1126
Production
The LT1126 dual and LT1127 quad are high performance, decompensated op amps that offer higher slew rate and bandwidth than the LT1124 dual and the LT1125...
Datasheet
LT1126 on Analog.com
LTC3412A
Production
The LTC3412A is a high efficiency monolithic synchronous, step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3412A on Analog.com
LT5570
Not Recommended for New Designs
The LT5570 is a 40MHz to 2.7GHz monolithic Logarithmic Mean-Squared RF power detector. It is capable of RMS measurement of an AC signal with wide dynamic...
Datasheet
LT5570 on Analog.com
LTC2266-14
Production
The LTC2268-14/LTC2267-14/LTC2266-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2266-14 on Analog.com
LTC2402
Production
The LTC2401/LTC2402 are 1- and 2-channel 2.7V to 5.5V micropower 24-bit analog-to-digital converters with an integrated oscillator, 4ppm INL and 0.6ppm...
Datasheet
LTC2402 on Analog.com
LTC4214
Recommended for New Designs
The LTC4214 negative voltage Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled...
Datasheet
LTC4214 on Analog.com
LT1342
Production
The LT1342 is an advanced low power three-driver, five-receiver RS232 transceiver. The LT1342 operates from a 5V supply and a 3V logic supply. Receiver...
Datasheet
LT1342 on Analog.com
LT8300
Recommended for New Designs
The LT8300 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform...
Datasheet
LT8300 on Analog.com
LTC1642A
Production
The LTC1642A is a 16-pin Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-Channel...
Datasheet
LTC1642A on Analog.com
LTC2471
Production
The LTC2471/LTC2473 are small, 16-bit analog-to-digital converters with an integrated precision reference and a selectable 208sps or 833sps output rate...
Datasheet
LTC2471 on Analog.com
LTC2404
Production
The LTC2404/LTC2408 are 4-/8-channel 2.7V to 5.5V micropower 24-bit A/D converters with an integrated oscillator, 4ppm INL and 0.3ppm RMS noise. They use...
Datasheet
LTC2404 on Analog.com
LT1136A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1136A on Analog.com
LTC1594L
Production
The LTC1594L/LTC1598L are 3V micropower, 12-bit sampling A/D converters that feature 4- and 8-channel multiplexers, respectively. They typically draw only...
Datasheet
LTC1594L on Analog.com
LTC6803-1
Not Recommended for New Designs
The LTC6803 is a 2nd generation, complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer...
Datasheet
LTC6803-1 on Analog.com
LTC1732-4
Production
The LTC1732 is a complete constant-current/constant-voltage linear charge controller for lithium-ion (Li-Ion) batteries. Nickel-cadmium (NiCd) and nickel...
Datasheet
LTC1732-4 on Analog.com
LT8440
Recommended for New Designs
The LT8440 is a power conditioner for intrinsically safe, industrial ethernet ports in hazardous or explosive environments. The internal pass transistor...
Datasheet
LT8440 on Analog.com
LTC2966
Recommended for New Designs
The LTC2966 is a low current, high voltage dual channel voltage monitor. Internal high value resistors sense the input monitor pins providing a compact...
Datasheet
LTC2966 on Analog.com
LT3433
Production
The LT3433 is a 200kHz fixed-frequency current mode switching regulator that provides both step-up and stepdown regulation using a single inductor. The...
Datasheet
LT3433 on Analog.com
LTC7862
Recommended for New Designs
The LTC7862 high efficiency switching surge stopper protects loads from high voltage transients. High efficiency switching allows high output currents...
Datasheet
LTC7862 on Analog.com
LT1168
Production
The LT1168 is a micropower, precision instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. The low voltage noise...
Datasheet
LT1168 on Analog.com
LTC1451
Production
The LTC1451/LTC1452/LTC1453 are complete single supply, rail-to-rail voltage output 12-bit digital-to-analog converters (DACs) in an SO-8 package. They...
Datasheet
LTC1451 on Analog.com
LTC1289
Production
The LTC1289 is a 3V data acquisition component which contains a serial I/O successive approximation A/D converter. The device specifications are guaranteed...
Datasheet
LTC1289 on Analog.com
LTC2217
Production
The LTC2217 is a 105Msps sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals with input frequencies up to...
Datasheet
LTC2217 on Analog.com
LTC1257
Production
The LTC®1257 is a complete single supply, 12-bit voltage output D/A converter (DAC) in an SO-8 package. The LTC1257 includes an output buffer amplifier...
Datasheet
LTC1257 on Analog.com
LTC2172-14
Production
The LTC2172-14/LTC2171-14/LTC2170-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2172-14 on Analog.com
LTC6256
Last Time Buy
The LTC6255/LTC6256/LTC6257 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6256 on Analog.com
LT3758
Production
The LT3758/LT3758A are wide input range, current mode, DC/DC controllers which are capable of generating either positive or negative output voltages. They...
Datasheet
LT3758 on Analog.com
LTC6244
Recommended for New Designs
The LTC6244 is a dual high speed, unity-gain stable CMOS op amp that features a 50MHz gain bandwidth, 40V/µs slew rate, 1pA of input bias current, low...
Datasheet
LTC6244 on Analog.com
LT3847
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1846 family of control ICs contains all necessary circuitry...
Datasheet
LT3847 on Analog.com
LTC2321-16
Production
The LTC2321-16 is a low noise, high speed dual 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode range...
Datasheet
LTC2321-16 on Analog.com
LTC2686
Recommended for New Designs
The LTC2686 is an 8-channel, 12-/16-bit, ±15 V digital-to-analog
converter (DAC) with an integrated precision reference. The LTC2686 is guaranteed monotonic...
Datasheet
LTC2686 on Analog.com
LTC1694-1
Production
The LTC1694-1 is a dual SMBus active pull-up designed
to enhance data transmission speed and reliability under
all specified SMBus loading conditions....
Datasheet
LTC1694-1 on Analog.com
LT1214
Production
The LT1213 is a dual, single supply precision op amp with a 28MHz gain-bandwidth product and a 12V/µs slew rate. The LT1214 is a quad version of the same...
Datasheet
LT1214 on Analog.com
LTC3633A-2
Production
The LTC3633A-2 is a high efficiency, dual-channel monolithic synchronous buck regulator using a controlled on-time, current mode architecture, with phase...
Datasheet
LTC3633A-2 on Analog.com
LTM8021
Recommended for New Designs
The LTM8021 is a 36VIN 500mA, step-down DC/DC µModule® (power module). Included in the package are the switching controller, power switches, inductor,...
Datasheet
LTM8021 on Analog.com
LTC3305
Recommended for New Designs
The LTC3305 balances up to 4 lead-acid batteries connected in series. It is intended to be used in conjunction with a separate pre-existing battery charger...
Datasheet
LTC3305 on Analog.com
LTC1706-19
Production
The LTC1706-19 is a precision, digitally programmed, resistive ladder which adjusts the output of any 1.19V referenced regulator. Depending on the state...
Datasheet
LTC1706-19 on Analog.com
LT5518
Last Time Buy
The LT5518 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5518 on Analog.com
LTC3106
Recommended for New Designs
The LTC3106 is a highly integrated, ultralow voltage buck-boost DC/DC converter with automatic PowerPath management optimized for multisource, low power...
Datasheet
LTC3106 on Analog.com
LT3599
Recommended for New Designs
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency...
Datasheet
LT3599 on Analog.com
LTC1588
Production
The LTC®1588/LTC1589/LTC1592 are serial input 12-/14-/16-bit multiplying current output DACs that operates from a single 5V supply. These SoftSpan™ DACs...
Datasheet
LTC1588 on Analog.com
LT3988
Production
The LT3988 is a dual, current mode, step-down, DC/DC converter that accepts two input voltages up to 60V (80V transient), which may be driven from separate...
Datasheet
LT3988 on Analog.com
LT1130A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1130A on Analog.com
LTC2983
Recommended for New Designs
The LTC2983 measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution. The...
Datasheet
LTC2983 on Analog.com
LT8650S-1
Obsolete
The LT®8650S-1 is a dual step-down regulator that delivers up to 4A of continuous current from both channels and supports loads up to 6A from each channel...
Datasheet
LT8650S-1 on Analog.com
LT5522
Production
The LT5522 active downconverting mixer is optimized for high linearity downconverter applications including cable and wireless infrastructure. The IC includes...
Datasheet
LT5522 on Analog.com
LT1226
Production
The LT1226 is a low noise, very high speed operational amplifier with excellent DC performance. The LT1226 features low input offset voltage and high DC...
Datasheet
LT1226 on Analog.com
LT8647
Recommended for New Designs
The LT8647 synchronous step-down regulator features
Silent Switcher architecture designed to minimize
Electromagnetic interference (EMI) emissions while...
Datasheet
LT8647 on Analog.com
LTC1420
Production
The LTC1420 is a 10Msps, 12-bit sampling A/D converter that draws only 250mW from either single 5V or dual ±5V supplies. This easy-to-use device includes...
Datasheet
LTC1420 on Analog.com
LTC2344-18
Production
The LTC2344-18 is an 18-bit, low noise 4-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode...
Datasheet
LTC2344-18 on Analog.com
LT1640
Production
The LT1640L/LT1640H is an 8-pin, negative voltage Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Inrush...
Datasheet
LT1640 on Analog.com
LT3966
Recommended for New Designs
The LT3966 is an I2C programmable monolithic boost LED driver with four independent channels. Each channel provides a 60V current mode boost converter...
Datasheet
LT3966 on Analog.com
LT4322
Recommended for New Designs
The LT4322 is a floating active rectifier controller that drives an external N-Channel MOSFET to replace a rectifier diode. It is designed primarily for...
Datasheet
LT4322 on Analog.com
LT3575
Production
The LT3575 is a monolithic switching regulator specifically designed for the isolated flyback topology. No third winding or optoisolator is required for...
Datasheet
LT3575 on Analog.com
LTC7806
Recommended for New Designs
The LTC7806 is a high performance 2-phase single output synchronous boost converter controller that drives two N-channel power MOSFET stages out-of-phase...
Datasheet
LTC7806 on Analog.com
LTC2287
Production
The LTC2288/LTC2287/LTC2286 are 10-bit 65Msps/ 40Msps/25Msps, low noise dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2287 on Analog.com
LTC2996
Production
The LTC2996 is a high accuracy temperature sensor with adjustable overtemperature and undertemperature thresholds and open drain alert outputs. It converts...
Datasheet
LTC2996 on Analog.com
LT1725
Production
The LT1725 is a monolithic switching regulator controller specifically designed for the isolated flyback topology. It drives the gate of an external MOSFET...
Datasheet
LT1725 on Analog.com
LTC2489
Production
The LTC2489 is a 4-channel (2-channel differential), 16-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling...
Datasheet
LTC2489 on Analog.com
LTC2411
Production
The LTC2411/LTC2411-1 are 2.7V to 5.5V micropower 24-bit differential ?S analog-to-digital converters with an integrated oscillator, 2ppm INL and 0.29ppm...
Datasheet
LTC2411 on Analog.com
LTM4643
Recommended for New Designs
The LTM4643 is a quad DC/DC step-down µModule (power module) regulator with 3A per output. Outputs can be paralleled in an array for up to 12A capability...
Datasheet
LTM4643 on Analog.com
LTC3251
Production
The LTC3251/LTC3251-1.2/LTC3251-1.5 are 2-phase charge pump step-down DC/DC converters that produce a regulated output from a 2.7V to 5.5V input. The parts...
Datasheet
LTC3251 on Analog.com
LTC2921
Recommended for New Designs
The LTC2921 and LTC2922 monitor up to five supplies and force them to track on power-up in multiple supply systems. Using external N-channel pass transistors...
Datasheet
LTC2921 on Analog.com
LTC3419
Production
The LTC3419 is a dual, 2.25MHz, constant-frequency, synchronous step-down DC/DC converter in a tiny 3mm × 3mm DFN package. 100% duty cycle provides low...
Datasheet
LTC3419 on Analog.com
LT3501
Production
The LT3501 is a dual current mode PWM step-down DC/DC converter with two internal 3.5A switches. Independent input voltage, feedback, soft-start and power...
Datasheet
LT3501 on Analog.com
LT1377
Production
The LT1372/LT1377 are monolithic high frequency switching regulators. They can be operated in all standard switching configurations including boost, buck...
Datasheet
LT1377 on Analog.com
LTC1484
Production
The LTC1484 is a low power RS485 compatible transceiver. In receiver mode, it offers a fail-safe feature which guarantees a high receiver output state...
Datasheet
LTC1484 on Analog.com
LTC7803-3.3
Pre release
The LTC7803-3.3 is a high performance synchronous step-down DC/DC switching regulator controller that drives an all N-channel power MOSFET stage. Synchronous...
Datasheet
LTC7803-3.3 on Analog.com
LTC3707-SYNC
Production
The LTC3707-SYNC is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3707-SYNC on Analog.com
LT4220
Recommended for New Designs
The LT4220 16-pin dual voltage Hot Swap controller allows a board to be safely inserted and removed from a live backplane. The device operates with any...
Datasheet
LT4220 on Analog.com
LT6105
Recommended for New Designs
The LT6105 is a micropower, precision current sense amplifier with a very wide input common mode range. The LT6105 monitors unidirectional current via...
Datasheet
LT6105 on Analog.com
LTC3459
Recommended for New Designs
The LTC3459 is a low current, high efficiency synchronous boost converter intended for low power, size constrained portable applications. The LTC3459 can...
Datasheet
LTC3459 on Analog.com
LTC2754
Production
The LTC2754 is a family of quad 12- and 16-bit multiplying serial-input, current-output digital-to-analog converters. They operate from a single 3V to...
Datasheet
LTC2754 on Analog.com
LT7170
Recommended for New Designs
The LT7170/LT7170-1 are monolithic DC/DC synchronous stepdown
regulators that deliver up to 20 A of continuous output
current. The LT7170-1 option has...
Datasheet
LT7170 on Analog.com
LTC7802-3.3
Recommended for New Designs
The LTC7802-3.3 is a high performance dual step-down synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET stages. Constant...
Datasheet
LTC7802-3.3 on Analog.com
LTM4608
Production
The LTM4608 is a complete 8A switch mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor and all support...
Datasheet
LTM4608 on Analog.com
LTC6948
Last Time Buy
The LTC6948 is a high performance, low noise, 6.39GHz phase-locked loop (PLL) with a fully integrated VCO, including a reference divider, phase-frequency...
LTC6948 on Analog.com
LTC3826
Production
The LTC3826 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant frequency...
Datasheet
LTC3826 on Analog.com
LT6552
Production
The LT6552 is a video difference amplifier optimized for low voltage single supply operation. This versatile amplifier features uncommitted high input...
Datasheet
LT6552 on Analog.com
LT1769
Production
The LT1769 current mode PWM battery charger is a simple, efficient solution to fast charge modern rechargeable batteries including lithium-ion (Li-Ion...
Datasheet
LT1769 on Analog.com
LTC2337-18
Production
The LTC2337-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with fully differential inputs. Operating from a single 5V...
Datasheet
LTC2337-18 on Analog.com
LTC1668
Production
The LTC1666/LTC1667/LTC1668 are 12-/14-/16-bit, 50Msps differential current output DACs implemented on a high performance BiCMOS process with laser trimmed...
Datasheet
LTC1668 on Analog.com
LTM8074
Recommended for New Designs
The LTM8074 is a 40VIN, 1.2A continuous, 1.75A peak, step-down µModule® (power module) regulator. The Silent Switcher architecture minimizes EMI while...
Datasheet
LTM8074 on Analog.com
LTC3413
Production
The LTC3413 is a high efficiency monolithic synchronous step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3413 on Analog.com
LT1371
Production
The LT1371 is a monolithic high frequency current mode switching regulator. It can be operated in all standard switching configurations including boost...
Datasheet
LT1371 on Analog.com
LT3971
Production
The LT3971 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 38V. Low quiescent current design...
Datasheet
LT3971 on Analog.com
LTC4246
Recommended for New Designs
The LTC4246 contains eight switches, each with an independent circuit breaker function. It is particularly well suited for extremely space constrained...
Datasheet
LTC4246 on Analog.com
LT8364
Recommended for New Designs
The LT8364 is a current mode DC/DC converter with a 60V, 4A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it...
Datasheet
LT8364 on Analog.com
LT1611
Production
The LT1611 is the industry’s first inverting 5-lead SOT-23 current mode DC/DC converter. Intended for use in small, low power applications, it operates...
Datasheet
LT1611 on Analog.com
LT3909
Recommended for New Designs
The LT3909 is a 2-string × 60mA LED driver with a fixed 2MHz step-up DC/DC converter capable of driving up to 36V of LEDs. Each LED string contains an...
Datasheet
LT3909 on Analog.com
LTC3307B
Recommended for New Designs
The LTC3307B is a very small, high efficiency, low noise, monolithic synchronous 3A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3307B on Analog.com
LTC1345
Production
The LTC1345 is a single chip transceiver that provides the differential clock and data signals for a V.35 interface from a single 5V supply. Combined with...
Datasheet
LTC1345 on Analog.com
LT5528
Last Time Buy
The LT5528 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5528 on Analog.com
LT1585
Production
The LT1584/LT1585/LT1587 are low dropout three-terminal regulators with 7A, 4.6A and 3A output current capability, respectively. Design has been optimized...
Datasheet
LT1585 on Analog.com
LTC1756
Production
The LTC1755/LTC1756 universal Smart Card interfaces are fully compliant with ISO 7816-3 and EMV specifications. The parts provide the smallest and simplest...
Datasheet
LTC1756 on Analog.com
LTM9007-14
Not Recommended for New Designs
The LTM9008-14/LTM9007-14/LTM9006-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9007-14 on Analog.com
LT1128
Production
The LT1028 (gain of –1 stable)/LT1128 (gain of +1 stable) achieve a new standard of excellence in noise performance with 0.85nV/√Hz 1kHz noise, 1.0nV...
Datasheet
LT1128 on Analog.com
LTC2152-14
Production
The LTC2152-14/LTC2151-14/LTC2150-14 are 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2152-14 on Analog.com
LT1118
Production
The LT1118 family of low dropout regulators has the unique capability of maintaining output regulation while sourcing or sinking load current. The 2.85V...
Datasheet
LT1118 on Analog.com
LT1529
Production
The LT®1529/LT1529-3.3/LT1529-5 are 3A low dropout regulators with micropower quiescent current and shutdown. The devices are capable of supplying 3A...
Datasheet
LT1529 on Analog.com
LTC5596
Recommended for New Designs
The LTC5596 is a high accuracy RMS power detector that provides a very wide RF input bandwidth, from 100MHz up to 40GHz. This makes the device suitable...
Datasheet
LTC5596 on Analog.com
LTC1315
Production
The LTC1314/LTC1315 provide the power switching necessary to control Personal Computer Memory Card International Association (PCMCIA) Release 2.0 card...
Datasheet
LTC1315 on Analog.com
LTC3371
Recommended for New Designs
The LTC3371 is a highly flexible multi-output power supply IC. The device includes four synchronous buck converters, configured to share eight 1A power...
Datasheet
LTC3371 on Analog.com
LTC1798
Production
The LTC1798/LTC1798-2.5/LTC1798-3/LTC1798-4.1/ LTC1798-5 are micropower bandgap references that combine high accuracy and low drift with very low supply...
Datasheet
LTC1798 on Analog.com
LTC2259-12
Production
The LTC2261-12/LTC2260-12/LTC2259-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2259-12 on Analog.com
LT1135A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1135A on Analog.com
LT8606
Recommended for New Designs
The LT8606 is a compact, high efficiency, high speed
synchronous monolithic step-down switching regulator
that consumes only 1.7μA of non-switching quiescent...
Datasheet
LT8606 on Analog.com
LT6300
Not Recommended for New Designs
The LT6300 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily...
Datasheet
LT6300 on Analog.com
LTC4230
Recommended for New Designs
The LTC4230 is a 3-channel Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Internal high side switch...
Datasheet
LTC4230 on Analog.com
LTC4088-1
Production
The LTC4088-1/LTC4088-2 is a high efficiency USB PowerPathâ„¢ controller and Li-Ion/Polymer battery charger. It includes a synchronous switching input...
Datasheet
LTC4088-1 on Analog.com
LTC4306
Production
The LTC4306 is a 4-channel, 2-wire bus multiplexer with bus buffers to provide capacitive isolation between the upstream bus and downstream buses. Through...
Datasheet
LTC4306 on Analog.com
LTM8071
Recommended for New Designs
The LTM8071 is a 60VIN, 5A (continuous) step-down Silent Switcher µModule® (power module) regulator. The Silent Switcher architecture minimizes EMI while...
Datasheet
LTM8071 on Analog.com
LTC3890-2
Recommended for New Designs
The LTC3890-2 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3890-2 on Analog.com
LTC1562
Production
The LTC1562 is a low noise, low distortion continuous-time filter with rail-to-rail inputs and outputs, optimized for a center frequency (fO) of 10kHz...
Datasheet
LTC1562 on Analog.com
LTC1852
Production
The 10-bit LTC1852 and 12-bit LTC1853 are complete 8-channel data acquisition systems. They include a flexible 8-channel multiplexer, a 400ksps successive...
Datasheet
LTC1852 on Analog.com
LT8705A
Recommended for New Designs
The LT8705A is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage...
Datasheet
LT8705A on Analog.com
LT3796
Production
The LT3796/LT3796-1 are DC/DC controllers designed to regulate a constant-current or constant-voltage and are ideal for driving LEDs. The fixed frequency...
Datasheet
LT3796 on Analog.com
LT3743
Production
The LT3743 is a fixed frequency synchronous step-down DC/DC controller designed to drive high current LEDs. The average current mode controller will maintain...
Datasheet
LT3743 on Analog.com
LTC2413
Production
The LTC2413 is a 2.7V to 5.5V simultaneous 50Hz/60Hz rejection micropower 24-bit differential ?S analog to digital converter with an integrated oscillator...
Datasheet
LTC2413 on Analog.com
LTC1540
Production
The LTC1540 is an ultralow power, single comparator with built-in reference. The comparator’s features include less than 0.6µA supply current over the...
Datasheet
LTC1540 on Analog.com
LT3980
Production
The LT3980 is an adjustable frequency (100kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 58V (80V transient). A high...
Datasheet
LT3980 on Analog.com
LT8418
Recommended for New Designs
The LT8418 is a 100V half-bridge GaN driver that integrates top and bottom driver stages, driver logic control, and protections. It can be configured into...
Datasheet
LT8418 on Analog.com
LT7182S
Recommended for New Designs
The LT7182S is a dual-output monolithic PolyPhase DC/DC synchronous step-down regulator. It can deliver up to 6A of continuous current from both channels...
Datasheet
LT7182S on Analog.com
LTC4403
Obsolete
The LTC4403-2 is a multiband RF power controller for RF power amplifiers operating in the 300MHz to 2.4GHz range. The LTC4403-2 has two outputs to control...
Datasheet
LTC4403 on Analog.com
LTC2366
Production
The LTC2365/LTC2366 are 1Msps/3Msps, 12-bit, sampling A/D converters that draw only 2mA and 2.6mA, respectively, from a single 3V supply. These high performance...
Datasheet
LTC2366 on Analog.com
LTC3723
Production
The LTC3723-1/LTC3723-2 synchronous push-pull PWM controllers provide all of the control and protection functions necessary for compact and highly efficient...
Datasheet
LTC3723 on Analog.com
LT3514
Production
The LT3514 consists of three buck regulators (2A, 1A, 1A output current). The device has a wide operating input range of 3.2V to 36V. An on-chip boost...
Datasheet
LT3514 on Analog.com
LTC2393-16
Production
The LTC2393-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2393-16 supports...
Datasheet
LTC2393-16 on Analog.com
LT1018
Production
The LT1017/LT1018 are general purpose micropower comparators. The LT1017 is optimized for lowest operating power while the LT1018 operates at higher power...
Datasheet
LT1018 on Analog.com
LTM8027
Recommended for New Designs
The LTM8027 is a complete 4A, DC/DC step-down power supply. Included in the package are the switching controller, power switches, inductor and all support...
Datasheet
LTM8027 on Analog.com
LT6600-2.5
Production
The LT6600-2.5 combines a fully differential amplifier with a 4th order 2.5MHz lowpass filter approximating a Chebyshev frequency response. Most differential...
Datasheet
LT6600-2.5 on Analog.com
LTM4649
Recommended for New Designs
The LTM4649 is a complete 10A high efficiency switching mode step-down DC/DC µModule® regulator in a 9mm × 15mm × 4.92 BGA package. Included in the package...
Datasheet
LTM4649 on Analog.com
LTC2931
Production
The LTC2931 is a con?gurable supply monitor for systems with up to six supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2931 on Analog.com
LTC5576
Production
The LTC5576 is a high linearity active mixer optimized for upconverting applications requiring wide input bandwidth, low distortion and low LO leakage...
Datasheet
LTC5576 on Analog.com
LT1505
Production
The LT1505 PWM battery charger controller fast charges multiple battery chemistries including lithium-ion (Li-Ion), nickel-metal-hydride (NiMH) and nickel...
Datasheet
LT1505 on Analog.com
LTC6912
Production
The LTC6912 is a family of dual channel, low noise, digitally programmable gain amplifiers (PGA) that are easy to use and occupy very little PC board space...
Datasheet
LTC6912 on Analog.com
LT1937
Production
The LT1937 is a step-up DC/DC converter specifically designed to drive white LEDs with a constant current. The device can drive two, three or four LEDs...
Datasheet
LT1937 on Analog.com
LTM4662
Recommended for New Designs
The LTM4662 is a complete dual 15A output switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductors...
Datasheet
LTM4662 on Analog.com
LT3383
Recommended for New Designs
The LT3383 is a complete power management solution for advanced portable application processor-based systems. The device contains four synchronous step...
Datasheet
LT3383 on Analog.com
LTC3315A
Recommended for New Designs
The LTC3315A features dual 2A monolithic synchronous step-down converters operating from a 2.25V to 5.5V input supply in one package for space-constrained...
Datasheet
LTC3315A on Analog.com
LT1847
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1846 family of control ICs contains all necessary circuitry...
Datasheet
LT1847 on Analog.com
LTC4091
Recommended for New Designs
The LTC4091 is a 36V Li-Ion battery charger and power backup manager. The integrated step-down switching regulator charges a battery from a primary power...
Datasheet
LTC4091 on Analog.com
LTC1235
Production
The LTC1235 provides complete power supply monitoring and battery control functions for microprocessor reset, battery backup, RAM write protection, power...
Datasheet
LTC1235 on Analog.com
LTC1403A
Production
The LTC1403/LTC1403A are 12-bit/14-bit, 2.8Msps serial ADCs with differential inputs. The devices draw only 4.7mA from a single 3V supply and come in a...
Datasheet
LTC1403A on Analog.com
LTC3713
Production
The LTC3713 is a high current, high efficiency synchronous buck switching regulator controller optimized for use with very low input supply voltages. It...
Datasheet
LTC3713 on Analog.com
LT6558
Recommended for New Designs
The LT6558 is a high speed triple video ampli?er with an internal ?xed gain of 1 and a programmable DC input bias voltage. This amplifier features a 400MHz...
Datasheet
LT6558 on Analog.com
LTC3588-1
Recommended for New Designs
The LTC3588-1 integrates a low-loss full-wave bridge rectifier with a high efficiency buck converter to form a complete energy harvesting solution optimized...
Datasheet
LTC3588-1 on Analog.com
LTC1740
Production
The LTC1740 is a 6Msps, 14-bit sampling A/D converter that draws only 245mW from either a single 5V or dual ±5V supplies. This easy-to-use device includes...
Datasheet
LTC1740 on Analog.com
LTC3566
Production
The LTC3566 family are highly integrated power management and battery charger ICs for Li-Ion/Polymer battery applications. They include a high efficiency...
Datasheet
LTC3566 on Analog.com
LTC2174-14
Production
The LTC2175-14/LTC2174-14/LTC2173-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2174-14 on Analog.com
LT1193
Production
The LT1193 is a video difference amplifier optimized for operation on ±5V and a single 5V supply. This versatile amplifier features uncommitted high input...
Datasheet
LT1193 on Analog.com
LT6275
Obsolete
The LT6275 are single/dual low power, high speed, very high slew rate operational amplifiers with outstanding AC and DC performance. The circuit topology...
Datasheet
LT6275 on Analog.com
LTC1605-1
Production
The LTC1605-1/LTC1605-2 are 100ksps, sampling 16-bit A/D converters that draw only 55mW (typical) from a single 5V supply. These easy-to-use devices include...
Datasheet
LTC1605-1 on Analog.com
LTC4218
Recommended for New Designs
The LTC4218 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal high side switch driver controls...
Datasheet
LTC4218 on Analog.com
LT1239
Obsolete
Obsolete: Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1239 is a micropower backup battery management...
Datasheet
LT1239 on Analog.com
LTC3613
Recommended for New Designs
The LTC3613 is a monolithic synchronous step-down switching regulator capable of regulating outputs from 0.6V to 5.5V with up to 15A output current. The...
Datasheet
LTC3613 on Analog.com
LTC4054L-4.2
Production
The LTC4054L is a complete, constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its small size and ability to regulate...
Datasheet
LTC4054L-4.2 on Analog.com
LTM4650A
Recommended for New Designs
The LTM4650A is a dual 25A or single 50A output switching mode step-down DC/DC μModule® (micromodule) regulator with ±1% total DC output error. Included...
Datasheet
LTM4650A on Analog.com
LTC1320
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1320 is an RS422/RS562 line transceiver designed to operate...
Datasheet
LTC1320 on Analog.com
LTC3556
Production
The LTC3556 is a highly integrated power management and battery charger IC for Li-Ion/Polymer battery applications. It includes a high efficiency current...
Datasheet
LTC3556 on Analog.com
LTC1867
Production
The LTC1863/LTC1867 are pin-compatible, 8-channel 12-/16-bit A/D converters with serial I/O, and an internal reference. The ADCs typically draw only 1...
Datasheet
LTC1867 on Analog.com
LT6013
Production
The LT6013 and LT6014 op amps combine low noise and high precision input performance with low power consumption and rail-to-rail output swing. The amplifiers...
Datasheet
LT6013 on Analog.com
LTC1589
Production
The LTC1588/LTC1589/LTC1592 are serial input 12-/14-/16-bit multiplying current output DACs that operates from a single 5V supply. These SoftSpan™ DACs...
Datasheet
LTC1589 on Analog.com
LTP5901-WHM
Production
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTP™5901-WHM is the SmartMesh...
Datasheet
LTP5901-WHM on Analog.com
LT1084-Fixed
Production
The LT1083 series of positive adjustable regulators are designed to provide 3A, 5A and 7.5A with higher efficiency than currently available devices. All...
Datasheet
LT1084-Fixed on Analog.com
LTC1624
Production
The LTC1624 is a current mode switching regulator controller that drives an external N-channel power MOSFET using a fixed frequency architecture. It can...
Datasheet
LTC1624 on Analog.com
LTC2311-16
Production
The LTC2311-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode range...
Datasheet
LTC2311-16 on Analog.com
LTC3200
Production
The LTC3200/LTC3200-5 are low noise, constant frequency switched capacitor voltage doublers. They produce a regulated output voltage from a 2.7V to 4.5V...
Datasheet
LTC3200 on Analog.com
LTC4361
Recommended for New Designs
The LTC4361 overvoltage/overcurrent protection controller safeguards 2.5V to 5.5V systems from input supply overvoltage. It is designed for portable devices...
Datasheet
LTC4361 on Analog.com
LTC1682
Production
The LTC1682/LTC1682-3.3/LTC1682-5 are doubler charge pumps with an internal low noise, low dropout (LDO) linear regulator. These parts are designed to...
Datasheet
LTC1682 on Analog.com
LT1490
Production
The dual LT1490 and quad LT1491 op amps operate on all single and split supplies with a total voltage of 2V to 44V drawing only 40µA of quiescent current...
LT1490 on Analog.com
LT1715
Production
The LT1715 is an UltraFast™ dual comparator optimized for low voltage operation. Separate supplies allow independent analog input ranges and output logic...
Datasheet
LT1715 on Analog.com
LTC2141-14
Production
The LTC2142-14/LTC2141-14/LTC2140-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2141-14 on Analog.com
LTC6560
Recommended for New Designs
The LTC6560 is a low-noise, transimpedance amplifier (TIA) with 220MHz bandwidth. The LTC6560’s low noise, high transimpedance and low power dissipation...
Datasheet
LTC6560 on Analog.com
LTC6800
Production
The LTC6800 is a precision instrumentation amplifier. The CMRR is typically 116dB with a single 5V supply and is independent of gain. The input offset...
Datasheet
LTC6800 on Analog.com
LTC2876
Production
The LTC2876 and LTC2877 are PROFIBUS RS485 transceivers designed to meet the test specifications for PROFIBUS-DP masters and PROFIBUS-DP slaves, fully...
Datasheet
LTC2876 on Analog.com
LTC7813
Recommended for New Designs
The LTC7813 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains...
Datasheet
LTC7813 on Analog.com
LTM4677
Recommended for New Designs
The LTM4677 is a dual 18A or single 36A step-down μModule® (power module) DC/DC regulator with 40ms turn0on time. It features remote configurability...
Datasheet
LTM4677 on Analog.com
LT3992
Production
The LT3992 is a dual current mode PWM step-down DC/DC converter with two internal 4.6A switches. Independent input voltage, shutdown, feedback, soft-start...
Datasheet
LT3992 on Analog.com
LTC1923
Production
The LTC1923 is a pulse width modulator intended for thermoelectric cooler (TEC) or heater applications requiring either unidirectional or bidirectional...
Datasheet
LTC1923 on Analog.com
LTC1560-1
Production
The LTC1560-1 is a 5th order, continuous-time, lowpass filter. The elliptic transfer function of the LTC1560-1 was carefully chosen to reach a compromise...
Datasheet
LTC1560-1 on Analog.com
LTC1174
Production
The LTC1174 is a simple current mode DC/DC converter ideally suited for 9V to 5V, 5V to 3.3V or 5V to –5V operation. With an internal 0.9O switch (at a...
Datasheet
LTC1174 on Analog.com
LTC3374A
Recommended for New Designs
The LTC3374A is a multioutput power supply IC consisting of eight synchronous 1A buck converters, all powered from independent 2.25V to 5.5V input supplies...
Datasheet
LTC3374A on Analog.com
LTC2266-12
Production
The LTC2268-12/LTC2267-12/LTC2266-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2266-12 on Analog.com
LTC1599
Production
The LTC1599 is a 2-byte parallel input 16-bit multiplying current output DAC that operates from a single 5V supply. INL and DNL are accurate to 1LSB over...
Datasheet
LTC1599 on Analog.com
LTC3400B
Production
The LTC3400/LTC3400B are synchronous, fixed frequency, step-up DC/DC converters delivering high efficiency in a 6-lead ThinSOT™ package. Capable of supplying...
Datasheet
LTC3400B on Analog.com
LT1373
Production
The LT1373 is a low supply current high frequency current mode switching regulator. It can be operated in all standard switching configurations including...
Datasheet
LT1373 on Analog.com
LTC6804-1
Production
The LTC6804 is a 3rd generation multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of...
Datasheet
LTC6804-1 on Analog.com
LTC4071
Recommended for New Designs
The LTC4071 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. A near-zero current...
Datasheet
LTC4071 on Analog.com
LT3009
Recommended for New Designs
The LT3009 Series are micropower, low dropout voltage (LDO) linear regulators. The devices supply 20mA output current with a dropout voltage of 280mV....
Datasheet
LT3009 on Analog.com
LT1109
Production
The LT1109 is a simple step-up DC/DC converter. Available in 8-pin SO, 3-lead TO-92 (fixed output only) or miniDIP packages, the devices require only three...
Datasheet
LT1109 on Analog.com
LTC2442
Production
The LTC2442 is an ultra high precision, variable speed, 24-bit ?S™ ADC with integrated ampli?er. The ampli?er can be con?gured as a buffer for easy input...
Datasheet
LTC2442 on Analog.com
LTC2058
Recommended for New Designs
The LTC®2058 is a dual, low noise, zero-drift operational amplifier that offers precision DC performance over a wide supply range of 4.75V to 36V. Offset...
Datasheet
LTC2058 on Analog.com
LT1935
Production
The LT1935 is the industry’s highest power SOT-23 switching regulator. Its unprecedented 2A, 40V internal switch allows high output currents to be generated...
Datasheet
LT1935 on Analog.com
LTC2943-1
Not Recommended for New Designs
The LTC2943-1 measures battery charge state, battery voltage, battery current and its own temperature in portable product applications. The wide input...
Datasheet
LTC2943-1 on Analog.com
LTC4160
Recommended for New Designs
The LTC4160/LTC4160-1 are high efficiency power management and Li-Ion/Polymer battery charger ICs. They each include a bidirectional switching PowerPath...
Datasheet
LTC4160 on Analog.com
LTC2263-14
Production
The LTC2265-14/LTC2264-14/LTC2263-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2263-14 on Analog.com
LT1618
Production
The LT1618 step-up DC/DC converter combines a traditional voltage feedback loop and a unique current feedback loop to operate as a constant-current, constant...
Datasheet
LT1618 on Analog.com
LTC4371
Recommended for New Designs
The LTC4371 is a two-input negative voltage ideal diode-OR controller that drives external N-channel MOSFETs as a low dissipation alternative to Schottky...
Datasheet
LTC4371 on Analog.com
LTC2934
Production
The LTC2934 ultra-low power voltage monitor provides system initialization, power-fail warning and reset generation functions. Low quiescent current (500nA...
Datasheet
LTC2934 on Analog.com
LTC2262-12
Production
The LTC2262-12 is a sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2262-12 is perfect for demanding...
Datasheet
LTC2262-12 on Analog.com
LT3042
Recommended for New Designs
The LT3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive...
Datasheet
LT3042 on Analog.com
LTC4318
Production
The LTC4318 enables the hardwired address of one or more I2C or SMBus slave devices to be translated to a different address. This allows slaves with the...
Datasheet
LTC4318 on Analog.com
LTC1266
Production
The LTC1266 series is a family of synchronous switching regulator controllers featuring automatic Burst Mode™ operation to maintain high efficiencies at...
Datasheet
LTC1266 on Analog.com
LT1765
Production
The LT1765 is a 1.25MHz monolithic buck switching regulator. A high efficiency 3A, 0.09? switch is included on the die together with all the control circuitry...
Datasheet
LT1765 on Analog.com
LTC1686
Production
The LTC1686/LTC1687 are high speed, precision delay, full-duplex RS485 transceivers that can operate at data rates as high as 52Mbps. The devices also...
Datasheet
LTC1686 on Analog.com
LT1253
Production
The LT1253 is a low cost dual current feedback amplifier for video applications. The LT1254 is a quad version of the LT1253. The amplifiers are completely...
Datasheet
LT1253 on Analog.com
LTC1383
Production
The LTC1383 is an ultra-low power 2-driver/2-receiver RS232 transceiver that operates from a single 5V supply. The charge pump requires only four space...
Datasheet
LTC1383 on Analog.com
LT4200
Recommended for New Designs
The LT4200 is an integrated solution for hot swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates...
Datasheet
LT4200 on Analog.com
LT1037
Production
The LT1007/LT1037 series features the lowest noise performance available to date for monolithic operational amplifiers: 2.5nV/vHz wideband noise (less...
Datasheet
LT1037 on Analog.com
LTC3403
Production
The LTC3403 is a high efficiency monolithic synchronous buck regulator optimized for WCDMA power amplifier applications. The output voltage can be dynamically...
Datasheet
LTC3403 on Analog.com
LT3496
Production
The LT3496 is a triple output DC/DC converter designed to operate as a constant-current source and is ideal for driving LEDs. The LT3496 works in buck...
Datasheet
LT3496 on Analog.com
LTC3717
Production
The LTC3717 is a synchronous step-down switching regulator controller for double data rate (DDR) and Quad Data Rateâ„¢ (QDRâ„¢) memory termination. The...
Datasheet
LTC3717 on Analog.com
LTC2909
Production
The LTC2909 is a dual input monitor intended for a variety of system monitoring applications. Polarity selection and a buffered reference output allow...
Datasheet
LTC2909 on Analog.com
LT1490A
Production
The LT1490A/LT1491A are dual and quad op amps with a low input offset voltage of 500µV max. The LT1490A/LT1491A operate on all single and split supplies...
Datasheet
LT1490A on Analog.com
LTC4381
Recommended for New Designs
The LTC4381 is an integrated solution for low quiescent current eFuse with an internal 9mΩ N-Channel MOSFET. Overvoltage protection is provided by clamping...
Datasheet
LTC4381 on Analog.com
LTC7878
Recommended for New Designs
The LTC7878 is a high performance buck-boost switching regulator controller that operates from an input voltage above, below or equal to the output voltage...
Datasheet
LTC7878 on Analog.com
LT1963
Production
The LT1963 series are low dropout regulators optimized for fast transient response. The devices are capable of supplying 1.5A of output current with a...
Datasheet
LT1963 on Analog.com
LTC1052
Production
The LTC1052 and LTC7652 are low noise zero-drift op amps manufactured using an enhanced LTCMOS™ silicon gate process. Chopper-stabilization constantly...
Datasheet
LTC1052 on Analog.com
LT1507
Production
The LT1507 is a 500kHz monolithic buck mode switching regulator, functionally identical to the LT1375 but optimized for lower input voltage applications...
Datasheet
LT1507 on Analog.com
LTC3221
Production
The LTC3221 family are micropower charge pump DC/DC converters that produce a regulated output at up to 60mA. The input voltage range is 1.8V to 5.5V....
Datasheet
LTC3221 on Analog.com
LTC2644
Production
The LTC2644 is a family of dual 12-, 10-, and 8-bit PWM-to-voltage output DACs with an integrated high accuracy, low drift, 10ppm/°C reference in a 12...
Datasheet
LTC2644 on Analog.com
LTC3314
Recommended for New Designs
The LTC3314A features dual monolithic synchronous 4A step-down converters in a 2.2mm × 2.7mm package for space saving applications with demanding performance...
Datasheet
LTC3314 on Analog.com
LTC3769
Recommended for New Designs
LTC3769 is a high performance single output synchronous boost converter controller that drives an all N-channel power MOSFET stage. Synchronous rectification...
Datasheet
LTC3769 on Analog.com
LTC4413-1
Recommended for New Designs
The LTC4413-1 and LTC4413-2 each contain two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. The...
Datasheet
LTC4413-1 on Analog.com
LTC6226
Last Time Buy
The LTC6226 are very fast, low noise rail-to-rail output, unity gain stable single/dual op amps, with a gainbandwidth product of 420MHz and a slew rate...
Datasheet
LTC6226 on Analog.com
LTC6246
Last Time Buy
The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA...
LTC6246 on Analog.com
LTC7810
Recommended for New Designs
The LTC7810 is a high performance dual step-down DC/DC switching regulator controller that drives all N-channel synchronous power MOSFET stages that can...
Datasheet
LTC7810 on Analog.com
LTC4085-1
Production
The LTC4085-1 is a USB power manager and Li-Ion battery charger designed for portable battery-powered applications. The part controls the total current...
Datasheet
LTC4085-1 on Analog.com
LTC3552
Production
The LTC3552 is a complete constant-current/constant voltage linear charger with a dual DC/DC converter for single cell lithium-ion batteries. Its DFN package...
Datasheet
LTC3552 on Analog.com
LT5571
Last Time Buy
The LT5571 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5571 on Analog.com
LTC6248
Last Time Buy
The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA...
LTC6248 on Analog.com
LTC4421
Recommended for New Designs
The LTC4421 connects one of two input supplies to a common output based on user-defined priority and validity. By definition, the supply connected to V1...
Datasheet
LTC4421 on Analog.com
LTC1758-1
Obsolete
The LTC1758-2 is a dual band RF power controller for RF power amplifiers operating in the 850MHz to 2GHz range. The loop bandwidth reduction to 250kHz...
Datasheet
LTC1758-1 on Analog.com
LT8638-2
Recommended for New Designs
The LT8638-2 synchronous step-down regulator
features the Silent Switcher® architecture designed to
minimize EMI emissions while delivering high efficiency...
Datasheet
LT8638-2 on Analog.com
LT8491
Recommended for New Designs
The LT8491 is a buck-boost switching regulator battery charger that implements a constant-current constant-voltage (CCCV) charging profile used for most...
Datasheet
LT8491 on Analog.com
LT1313
Obsolete
The LT1313 is a member of the Analog Devices PCMCIA driver/regulator family. It provides 0V, 3.3V, 5V, 12V and Hi-Z regulated power to the VPP pins of...
Datasheet
LT1313 on Analog.com
LT1362
Production
The LT1361/LT1362 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1362 on Analog.com
LTC3303
Recommended for New Designs
The LTC3303 is a very small, high efficiency, low noise, monolithic synchronous 4A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3303 on Analog.com
LTC1483
Production
The LTC1483 is an ultra-low power differential line transceiver designed for data transmission standard RS485 applications with extended common-mode range...
Datasheet
LTC1483 on Analog.com
LTC2190
Production
The LTC2192/LTC2191/LTC2190 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2190 on Analog.com
LT1673
Production
The LT1672/LT1673/LT1674 are ultralow power (IS = 2µA) decompompensated (AV = 5) op amps with precision specifications. The extremely low supply current...
Datasheet
LT1673 on Analog.com
LT3922
Production
The LT3922 is a monolithic, synchronous, step-up DC/DC converter that utilizes fixed-frequency, peak current control and provides PWM dimming for a string...
Datasheet
LT3922 on Analog.com
LT1339
Production
The LT1339 is a high power synchronous current mode switching regulator controller. The IC drives dual N-channel MOSFETs to create a single IC solution...
Datasheet
LT1339 on Analog.com
LTC3313
Recommended for New Designs
The LTC3313 is a very small, low noise, monolithic step-down DC/DC converter capable of providing up to 15A of output current from a 2.25V to 5.5V input...
Datasheet
LTC3313 on Analog.com
LT1110
Production
The LT1110 is a versatile micropower DC-DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. The very...
Datasheet
LT1110 on Analog.com
LTC1419
Production
The LTC1419 is a 1µs, 800ksps, 14-bit sampling A/D converter that draws only 150mW from ±5V supplies. This easy-to-use device includes a high dynamic...
Datasheet
LTC1419 on Analog.com
LTC1278
Production
The LTC1278 is a 1.6µs, 500ksps, sampling 12-bit A/D converter that draws only 75mW from a single 5V or ±5V supplies. This easy-to-use device comes complete...
Datasheet
LTC1278 on Analog.com
LTC2912
Production
The LTC2912 voltage monitor is designed to detect power supply undervoltage and overvoltage events. The VL and VH monitor inputs include filtering to reject...
Datasheet
LTC2912 on Analog.com
LTC1068
Production
The LTC1068 product family consists of four monolithic clock-tunable filter building blocks. Each product contains four matched, low noise, high accuracy...
Datasheet
LTC1068 on Analog.com
LTC2066
Recommended for New Designs
The LTC2066/LTC2067/LTC2068 are single, dual, and quad low power, zero-drift, 100kHz amplifiers. The LTC2066/LTC2067/LTC2068 enable high resolution measurement...
Datasheet
LTC2066 on Analog.com
LTC1960
Production
The LTC1960 is a highly integrated battery charger and selector intended for portable products using dual smart batteries. A serial SPI interface allows...
Datasheet
LTC1960 on Analog.com
LTM8083
Recommended for New Designs
The LTM8083 is a 36VIN, Buck-Boost μModule® Regulator. Included in the package are the switching controller, power switches, inductor, and support components...
Datasheet
LTM8083 on Analog.com
LTspice
Production
LTspice® is a powerful, fast, and free SPICE simulator software, schematic capture and waveform viewer with enhancements and models for improving the simulation...
LTspice on Analog.com
LTC3737
Production
The LTC3737 is a 2-phase dual step-down switching regulator controller that requires few external components. The constant frequency current mode architecture...
Datasheet
LTC3737 on Analog.com
LT8302
Recommended for New Designs
The LT8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback...
Datasheet
LT8302 on Analog.com
LTC3406AB-2
Production
The LTC3406AB-2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current with no...
Datasheet
LTC3406AB-2 on Analog.com
LTC4440
Production
The LTC4440 is a high frequency high side N-channel MOSFET gate driver that is designed to operate in applications with VIN voltages up to 80V. The LTC4440...
Datasheet
LTC4440 on Analog.com
LTC3814-5
Production
The LTC3814-5 is a synchronous step-up switching regulator controller that can generate output voltages up to 60V. The LTC3814-5 uses a constant off-time...
Datasheet
LTC3814-5 on Analog.com
LTC2621
Production
The LTC2601/LTC2611/LTC2621 are single 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2621 on Analog.com
LT3669
Recommended for New Designs
The LT3669 is an industrial transceiver that includes a step-down switching regulator and a low dropout linear regulator. Wake-up detect functionality...
Datasheet
LT3669 on Analog.com
LTC2262-14
Production
The LTC2262-14 is a sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2262-14 is perfect for demanding...
Datasheet
LTC2262-14 on Analog.com
LTM8031
Production
The LTM8031 is an electromagnetic compatible (EMC) 36V, 1A DC/DC µModule® (power module) buck converter designed to meet the radiated emissions requirements...
Datasheet
LTM8031 on Analog.com
LT5546
Production
The LT5546 is a 40MHz to 500MHz monolithic integrated quadrature demodulator with variable gain amplifier (VGA) and 17MHz I/Q baseband bandwidth designed...
Datasheet
LT5546 on Analog.com
LTC1555L-1.8
Production
The LTC1555L-1.8 provides power conversion and level shifting needed for low voltage GSM and WCDMA cellular telephones to interface with either 1.8V, 3V...
Datasheet
LTC1555L-1.8 on Analog.com
LTM4664
Recommended for New Designs
The LTM4664 is a complete non-isolated 48V input high efficiency step-down µModule® regulator with dual 25A outputs. The switching controllers, power...
Datasheet
LTM4664 on Analog.com
LTC2150-12
Production
The LTC2152-12/LTC2151-12/LTC2150-12 are a family of 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2150-12 on Analog.com
LTC1844
Production
The LTC1844 Series are low noise VLDO™ (very low dropout) linear regulators designed for low power/portable applications. These regulators can operate...
Datasheet
LTC1844 on Analog.com
LTC1454
Production
The LTC1454/LTC1454L are complete single supply, dual rail-to-rail voltage output, 12-bit digital-to-analog converters (DACs) in a 16-lead SO package....
Datasheet
LTC1454 on Analog.com
LT3066
Recommended for New Designs
The LT3066 series are micropower, low noise, low dropout voltage (LDO) linear regulators that operate over a 1.8V to 45V input voltage range. The devices...
Datasheet
LT3066 on Analog.com
LT1683
Production
The LT1683 is a switching regulator controller designed to lower conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are...
Datasheet
LT1683 on Analog.com
LTC6992-1
Production
The LTC6992 is a silicon oscillator with an easy-to-use analog voltage-controlled pulse width modulation (PWM) capability. The LTC6992 is part of the TimerBlox...
Datasheet
LTC6992-1 on Analog.com
LTC487
Production
The LTC487 is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common mode...
Datasheet
LTC487 on Analog.com
LT8334
Recommended for New Designs
The LT8334 is a current mode DC/DC converter with a 40V, 5A switch operating from a 2.8V to 40V input. With a unique single feedback pin architecture,...
Datasheet
LT8334 on Analog.com
LTC1696
Production
The LTC1696 is a standalone power supply overvoltage monitor and protection device designed to protect a power supply load in the event of an overvoltage...
Datasheet
LTC1696 on Analog.com
LTC4278
Production
The LTC4278 is an integrated Powered Device (PD) controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications. With...
Datasheet
LTC4278 on Analog.com
LTC6900
Production
The LTC6900 is a precision, low power oscillator that is easy to use and occupies very little PC board space. The oscillator frequency is programmed by...
Datasheet
LTC6900 on Analog.com
LT317A
Production
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Analog Devices Are Now Obsolete
The LT117A Series are 3-terminal positive adjustable voltage...
Datasheet
LT317A on Analog.com
LTC3861-1
Recommended for New Designs
The LTC3861-1 is a dual PolyPhase® synchronous stepdown switching regulator controller for high current distributed power systems, digital signal processors...
Datasheet
LTC3861-1 on Analog.com
LTC3214
Production
The LTC3214 is a low noise, high current charge pump DC/DC converter capable of driving high current LEDs at up to 500mA from a 2.9V to 4.5V input. Low...
Datasheet
LTC3214 on Analog.com
LTM2887
Production
The LTM2887 is a complete galvanic digital µModule® (micromodule) isolator. No external components are required. A single 3.3V or 5V supply powers both...
Datasheet
LTM2887 on Analog.com
LTC2353-16
Production
The LTC2353-16 is a 16-bit, low noise 2-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2353-16 on Analog.com
LTC2852
Production
The LTC2850, LTC2851 and LTC2852 are low power, 20Mbps RS485/RS422 transceivers operating on 3.3V supplies. The receiver has a one-eighth unit load supporting...
Datasheet
LTC2852 on Analog.com
LTC4054-4.2
Production
The LTC4054 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its ThinSOT package and low external...
Datasheet
LTC4054-4.2 on Analog.com
LTC2488
Production
The LTC2488 is a 4-channel (2-channel differential), 16-bit, No Latency ?S™ ADC with Easy Drive™ technology. The patented sampling scheme eliminates dynamic...
Datasheet
LTC2488 on Analog.com
LT3967
Recommended for New Designs
The LT3967 is an LED bypass switching device for dimming individual LEDs in a string using a common current source. It features eight individually controlled...
Datasheet
LT3967 on Analog.com
LTC4212
Production
The LTC4212 is a Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. An internal high side switch driver...
Datasheet
LTC4212 on Analog.com
LT8711
Recommended for New Designs
The LT8711 is a multi-topology current mode PWM controller that can easily be configured as a synchronous buck, boost, SEPIC, ZETA or as a nonsynchronous...
Datasheet
LT8711 on Analog.com
LTC3857-1
Production
The LTC3857-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3857-1 on Analog.com
LTC2236
Production
The LTC2238/LTC2237/LTC2236 are 10-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2236 on Analog.com
LTC2312-14
Production
The LTC2312-14 is a 14-bit, 500ksps, serial sampling A/D converter that draws only 3.2mA from a single 3V or 5V supply. The LTC2312-14 contains an integrated...
Datasheet
LTC2312-14 on Analog.com
LTC3548-2
Production
The LTC3548-2 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 2.5V to 5.5V...
Datasheet
LTC3548-2 on Analog.com
LT3587
Production
The LT3587 provides a one-chip solution for applications requiring two positive and one negative high voltage supplies.The LT3587 input voltage range of...
Datasheet
LT3587 on Analog.com
LTC3832
Production
The LTC3832/LTC3832-1 are high power, high efficiency switching regulator controllers optimized for 3.3V-5V to 0.6V-3.xV step-down applications. A precision...
Datasheet
LTC3832 on Analog.com
LT1374
Production
The LT1374 is a 500kHz monolithic buck mode switching regulator. A 4.5A switch is included on the die along with all the necessary oscillator, control...
Datasheet
LT1374 on Analog.com
LTC2861
Production
The LTC2859 and LTC2861 are low power, 20Mbps RS485/422 transceivers operating on 5V supplies. The receiver includes a logic-selectable 120O termination...
Datasheet
LTC2861 on Analog.com
LTC6421-20
Recommended for New Designs
The LTC6421-20 is a dual high speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to...
Datasheet
LTC6421-20 on Analog.com
LTC2902
Production
The LTC2902 is a programmable supply monitor for systems with up to four supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2902 on Analog.com
LTC1153
Production
The LTC1153 electronic circuit breaker drives a low cost N-channel MOSFET to interrupt power to a sensitive electronic load in the event of an over-current...
Datasheet
LTC1153 on Analog.com
LTC3615
Production
The LTC3615/LTC3615-1 are dual 3A synchronous stepdown regulators using a current mode, constant-frequency architecture. The DC supply current is only...
Datasheet
LTC3615 on Analog.com
LTC6078
Production
The LTC6078/LTC6079 are dual/quad, low offset, low noise operational amplifiers with low power consumption and rail-to-rail input/output swing.
Input offset...
Datasheet
LTC6078 on Analog.com
LTC1069-1
Production
The LTC1069-1 is a monolithic 8th order lowpass filter featuring clock-tunable cutoff frequency and 2.5mA power supply current with a single 5V supply...
Datasheet
LTC1069-1 on Analog.com
LT3760
Recommended for New Designs
The LT3760 is an 8-channel LED driver with a step-up DC/DC controller capable of driving up to 45V of LEDs. Each channel contains an accurate current sink...
Datasheet
LT3760 on Analog.com
LTC4057-4.2
Production
The LTC4057 is a constant-current/constant-voltage linear
charger for single-cell lithium-ion batteries. Its
ThinSOT™ package and low external component...
Datasheet
LTC4057-4.2 on Analog.com
LT8625S
Recommended for New Designs
The LT8625S synchronous step-down regulator features
third-generation Silent Switcher technology which is
uniquely designed to combine an ultralow noise...
Datasheet
LT8625S on Analog.com
LTC2601
Production
The LTC2601/LTC2611/LTC2621 are single 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2601 on Analog.com
LTC3831
Production
The LTC3831 is a high power, high efficiency switching regulator controller designed for DDR memory termination. The LTC3831 generates an output voltage...
Datasheet
LTC3831 on Analog.com
LTC1562-2
Production
The LTC1562-2 is a low noise, low distortion continuous time filter with rail-to-rail inputs and outputs, optimized for a center frequency (fO) of 20kHz...
Datasheet
LTC1562-2 on Analog.com
LTC1821
Production
The LTC1821 is a parallel input 16-bit multiplying voltage output DAC that operates from analog supply voltages of ±5V up to ±15V. INL and DNL are accurate...
Datasheet
LTC1821 on Analog.com
LT1038
Obsolete
Obsolete: Data Sheet For Reference Only
The LT1038 is a three terminal regulator which is capable of providing in excess of 10A output current over 1.2V...
Datasheet
LT1038 on Analog.com
LT5506
Production
The LT5506 is a 40MHz to 500MHz monolithic integrated quadrature demodulator with variable gain amplifier (VGA), designed for low voltage operation. It...
Datasheet
LT5506 on Analog.com
LTC1264
Production
The LTC1264 consists of four identical, high speed 2nd order switched-capacitor filter building blocks designed for center frequencies up to 250kHz. Each...
Datasheet
LTC1264 on Analog.com
LTC1853
Production
The 10-bit LTC1852 and 12-bit LTC1853 are complete 8-channel data acquisition systems. They include a flexible 8-channel multiplexer, a 400ksps successive...
Datasheet
LTC1853 on Analog.com
LTC1695
Production
The LTC1695 fan speed controller provides all the functions necessary for a power management microprocessor to regulate the speed of a 5V brushless DC...
Datasheet
LTC1695 on Analog.com
LTM4613
Recommended for New Designs
The LTM4613 is a complete, ultralow noise, 8A switch mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor...
Datasheet
LTM4613 on Analog.com
LTC2258-12
Production
The LTC2258-12/LTC2257-12/LTC2256-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2258-12 on Analog.com
LT1934
Production
The LT1934 is a micropower step-down DC/DC converter with internal 400mA power switch, packaged in a low profile (1mm) ThinSOT. With its wide input range...
Datasheet
LT1934 on Analog.com
LT3640
Production
The LT3640 is a dual channel, current mode monolithic buck switching regulator with a power-on reset and a watchdog timer. Both regulators are synchronized...
Datasheet
LT3640 on Analog.com
LTC3828
Production
The LTC3828 is a dual high performance step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant frequency...
Datasheet
LTC3828 on Analog.com
LTC2995
Production
The LTC2995 is a high accuracy temperature sensor and dual supply monitor. It converts the temperature of an external diode sensor and/or its own die temperature...
Datasheet
LTC2995 on Analog.com
LT5400
Recommended for New Designs
The LT5400 is a quad resistor network with excellent matching specifications over the entire temperature range. Matching is also specified when the LT5400...
Datasheet
LT5400 on Analog.com
LT6012
Production
The LT6011/LT6012 op amps combine low noise and high precision input performance with low power consumption and rail-to-rail output swing.
Input offset...
Datasheet
LT6012 on Analog.com
LTC1392
Production
The LTC1392 is a micropower data acquisition system designed to measure temperature, on-chip supply voltage and a differential voltage. The differential...
Datasheet
LTC1392 on Analog.com
LT8357
Recommended for New Designs
The LT8357 is a wide input range, current mode, DC/DC controller which can be configured as a boost, SEPIC or flyback converter. The LT8357 drives a low...
Datasheet
LT8357 on Analog.com
LTC2057
Recommended for New Designs
The LTC2057 is a high voltage, low noise, zero-drift operational amplifier that offers precision DC performance over a wide supply range of 4.75V to 36V...
Datasheet
LTC2057 on Analog.com
LTC3442
Production
The LTC3442 is a highly efficient, fixed frequency, Buck-Boost DC/DC converter, which operates from input voltages above, below, and equal to the output...
Datasheet
LTC3442 on Analog.com
LTC6945
Last Time Buy
The LTC6945 is a high performance, low noise, 6GHz phase-locked loop (PLL), including a reference divider, phase-frequency detector (PFD) with phase-lock...
Datasheet
LTC6945 on Analog.com
LT3027
Recommended for New Designs
The LT3027 is a dual, micropower, low noise, low dropout regulator with independent inputs. With an external 0.01µF bypass capacitor, output noise is a...
Datasheet
LT3027 on Analog.com
LT1513
Production
The LT1513 is a 500kHz current mode switching regulator specially configured to create a constant- or programmable-current/constant-voltage battery charger...
Datasheet
LT1513 on Analog.com
LT3681
Production
The LT3681 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high...
Datasheet
LT3681 on Analog.com
LTC1729
Production
The LTC1729 series is a family of smart termination controllers for lithium-ion battery chargers. These ICs provide trickle charge preconditioning, temperature...
Datasheet
LTC1729 on Analog.com
LTC1700
Production
The LTC1700 is a current mode synchronous step-up DC/DC controller that drives external N-channel and P-channel power MOSFETs using a constant frequency...
Datasheet
LTC1700 on Analog.com
LTC3388
Recommended for New Designs
The LTC3388-1/LTC3388-3 are high efficiency step-down DC/DC converters with internal high side and synchronous power switches that draw only 720nA typical...
Datasheet
LTC3388 on Analog.com
LTC2313-14
Production
The LTC2313-14 is a 14-bit, 2.5Msps, serial sampling A/D converter that draws only 5mA from a single 3V or 5V supply. The LTC2313-14 contains an integrated...
Datasheet
LTC2313-14 on Analog.com
LT1025
Production
The LT1025 is a micropower thermocouple cold junction
compensator for use with type E, J, K, R, S, and T
thermocouples. It utilizes wafer level and post...
Datasheet
LT1025 on Analog.com
LTC2245
Production
The LTC2245 is a 14-bit 10Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2245 is perfect for...
Datasheet
LTC2245 on Analog.com
LTC3112
Recommended for New Designs
The LTC3112 is a fixed frequency synchronous buck-boost DC/DC converter with an extended input and output range. The unique 4-switch, single inductor architecture...
Datasheet
LTC3112 on Analog.com
LTC4241
Recommended for New Designs
The LTC4241 is a Hot Swap controller that allows a board to be safely inserted and removed from a live PCI-bus slot. It has a primary controller that controls...
Datasheet
LTC4241 on Analog.com
LT1804
Production
The LT1803/LT1804/LT1805 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT1804 on Analog.com
LT1457
Production
The LT1457 is a dual, JFET input op amp optimized for handling large capacitive loads in combination with precision performance.
Precision specifications...
Datasheet
LT1457 on Analog.com
LT3845
Not Recommended for New Designs
The LT3845 is a high voltage, synchronous, current mode controller used for medium to high power, high efficiency supplies. It offers a wide 4V to 60V...
Datasheet
LT3845 on Analog.com
LTC2231
Production
The LTC2230 and LTC2231 are 170Msps/135Msps, sampling 10-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2230...
Datasheet
LTC2231 on Analog.com
LTC3619B
Production
The LTC3619B is a dual monolithic synchronous buck regulator using a constant frequency current mode architecture.
The input supply voltage range is 2...
Datasheet
LTC3619B on Analog.com
LTC2846
Production
The LTC2846 is a 3-driver/3-receiver multiprotocol transceiver with on-chip cable termination. When combined with the LTC2844 or LTC2845, this chip set...
Datasheet
LTC2846 on Analog.com
LTC3605A
Production
The LTC3605A is a high efficiency, monolithic synchronous buck regulator using a phase lockable controlled on-time constant frequency, current mode architecture...
Datasheet
LTC3605A on Analog.com
LTC4315
Production
The LTC4315 is a hot-swappable 2-wire bus buffer that provides bidirectional buffering, while maintaining a low offset voltage and high noise margin up...
Datasheet
LTC4315 on Analog.com
LTC4249
Recommended for New Designs
The LTC4249 dual electronic circuit breaker (ECB) provides independent overcurrent protection to a pair of loads. Each channel has a precision enable input...
Datasheet
LTC4249 on Analog.com
LTC2335-16
Production
The LTC2335-16 is a 16-bit, low noise 8-channel multiplexed successive approximation register (SAR) ADC with differential, wide common mode range inputs...
Datasheet
LTC2335-16 on Analog.com
LT1058
Production
The LT®1057 is a matched JFET input dual op amp in the industry standard 8-pin configuration, featuring a combination of outstanding high speed and precision...
Datasheet
LT1058 on Analog.com
LTC3108-1
Recommended for New Designs
The LTC3108-1 is a highly integrated DC/DC converter ideal for harvesting and managing surplus energy from extremely low input voltage sources such as...
Datasheet
LTC3108-1 on Analog.com
LT1537
Production
The LT1537 is a three-driver, five-receiver RS232 transceiver, pin compatible with the LT1137A, offering performance improvements and two shutdown modes...
Datasheet
LT1537 on Analog.com
LTC1064-7
Not Recommended for New Designs
The LTC1064-7 is a clock-tunable monolithic 8th order lowpass filter with linear passband phase and flat group delay. The amplitude response approximates...
Datasheet
LTC1064-7 on Analog.com
LTC1553
Production
The LTC1553 is a high power, high efficiency switching regulator controller optimized for 5V or 12V input to 1.8V-3.5V output applications. It features...
Datasheet
LTC1553 on Analog.com
LT3950
Recommended for New Designs
The LT3950 is a multitopology DC/DC converter designed
specifically to drive high current LEDs. It contains a 1.5A,
60V DMOS switch and supports an external...
Datasheet
LT3950 on Analog.com
LTC4065-4.4
Production
The LTC4065-4.4 is a complete constant-current/constant-voltage linear charger for high capacity single-cell lithium-ion batteries with a 4.4V float voltage...
Datasheet
LTC4065-4.4 on Analog.com
LTC3210-2
Production
The LTC3210-2/LTC3210-3 are low noise charge pump DC/DC converters designed to drive three or four MAIN LEDs and one high current CAM LED for camera lighting...
Datasheet
LTC3210-2 on Analog.com
LTC2373-16
Production
The LTC2373-16 is a low noise, high speed, 8-channel 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2373...
Datasheet
LTC2373-16 on Analog.com
LT8636
Recommended for New Designs
The LT8636/LT8637 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency...
Datasheet
LT8636 on Analog.com
LTC6400-8
Last Time Buy
The LTC6400-8 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive...
LTC6400-8 on Analog.com
LT1938
Production
The LT1938 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 25V. A high efficiency 0...
Datasheet
LT1938 on Analog.com
LT1763
Recommended for New Designs
The LT1763 series are micropower, low noise, low dropout regulators. The devices are capable of supplying 500mA of output current with a dropout voltage...
Datasheet
LT1763 on Analog.com
LTC5598
Production
The LTC5598 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LTC5598 on Analog.com
LT3952
Obsolete
The LT3952 is a current mode step-up DC/DC converter with an internal, 60V, 80mO DMOS power switch. The LT3952 is specifically designed to drive high power...
LT3952 on Analog.com
LTC1706-82
Production
The LTC1706-82 is a precision, digitally programmed, resistive ladder which adjusts the output of any 0.8V referenced regulator. Depending on the state...
Datasheet
LTC1706-82 on Analog.com
LTC2627
Production
The LTC2607/LTC2617/LTC2627 are dual 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 12-lead DFN package. They have built-in high...
Datasheet
LTC2627 on Analog.com
LTC3773
Production
The LTC3773 is a high performance, 3-phase, triple output synchronous step-down switching regulator controller with output voltage power up/down tracking...
Datasheet
LTC3773 on Analog.com
LT1211
Production
The LT1211 is a dual, single supply precision op amp with a 14MHz gain-bandwidth product and a 7V/µs slew rate. The LT1212 is a quad version of the same...
Datasheet
LT1211 on Analog.com
LTC1985-1.8
Production
The LTC1985-1.8 is a triple supply monitor intended for systems with multiple supply voltages. The reset output remains low until all three supplies have...
Datasheet
LTC1985-1.8 on Analog.com
LTC3541
Production
The LTC3541 combines a synchronous buck DC/DC converter with a very low dropout linear regulator (VLDO) to provide up to two output voltages from a single...
Datasheet
LTC3541 on Analog.com
LTC2202
Production
The LTC2203/LTC2202 are 25Msps/10Msps, sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals with input frequencies...
Datasheet
LTC2202 on Analog.com
LT3464
Production
The LT3464 is a micropower step-up DC/DC converter with integrated Schottky diode and output disconnect packaged in an 8-lead low profile (1mm) SOT-23...
Datasheet
LT3464 on Analog.com
LTC1706-81
Production
The LTC1706-81 is a precision, digitally programmed, resistive ladder which adjusts the output of any 0.8V referenced regulator. Depending on the state...
Datasheet
LTC1706-81 on Analog.com
LT3762
Production
The LT3762 is a synchronous DC/DC controller designed to operate as a constant-current source and constant-voltage regulator. It features a programmable...
Datasheet
LT3762 on Analog.com
LTC7106
Recommended for New Designs
The LTC7106 is a precision, PMBus controlled, bidirectional current digital-to-analog converter that adjusts the output voltage of any conventional VFB...
Datasheet
LTC7106 on Analog.com
LT8611
Recommended for New Designs
The LT8611 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5µA of quiescent current...
Datasheet
LT8611 on Analog.com
LTC2431
Production
The LTC2430/LTC2431 are 2.7V to 5.5V micropower 20-bit differential ?S analog-to-digital converters with an integrated oscillator, 3ppm INL and 0.56ppm...
Datasheet
LTC2431 on Analog.com
LT6372-0.2
Recommended for New Designs
The LT6372-0.2 is a gain programmable, high precision funneling instrumentation amplifier that delivers industry leading DC precision. This high precision...
Datasheet
LT6372-0.2 on Analog.com
LT1376
Production
The LT1375/LT1376 are 500kHz monolithic buck mode switching regulators. A 1.5A switch is included on the die along with all the necessary oscillator, control...
Datasheet
LT1376 on Analog.com
LTC4296-1
Recommended for New Designs
The LTC4296-1 is an IEEE 802.3cg-compliant, five port, single-pair power over Ethernet (SPoE), power sourcing equipment (PSE) controller. SPoE simplifies...
Datasheet
LTC4296-1 on Analog.com
LTC1606
Production
The LTC1606 is a 250ksps, sampling 16-bit A/D converter that draws only 75mW (typical) from a single 5V supply. This easy-to-use device includes sample...
Datasheet
LTC1606 on Analog.com
LT1810
Production
The LT1809/LT1810 are single/dual low distortion rail-to-rail input and output op amps with a 350V/µs slew rate. These amplifiers have a –3dB bandwidth...
Datasheet
LT1810 on Analog.com
LTC5548
Production
The LTC5548 is a high performance, microwave double balanced passive mixer that can be used for frequency upconversion or downconversion. The device is...
Datasheet
LTC5548 on Analog.com
LTC3709
Production
The LTC3709 is a single output, dual phase, synchronous step-down switching regulator. The controller uses a constant on-time, valley current control architecture...
Datasheet
LTC3709 on Analog.com
LT1524
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1524 PWM switching regulator control circuit contains...
Datasheet
LT1524 on Analog.com
LTC6803-3
Production
The LTC6803 is a 2nd generation, complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer...
Datasheet
LTC6803-3 on Analog.com
LTC3410-1.875
Production
The LTC3410-1.875 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during...
Datasheet
LTC3410-1.875 on Analog.com
LTC3444
Recommended for New Designs
The LTC3444 is a highly efficient, fixed frequency, buck-boost DC/DC converter, which operates from input voltages above, below, and equal to the output...
Datasheet
LTC3444 on Analog.com
LT1910
Production
The LT1910 is a high side gate driver that allows the use of low cost N-channel power MOSFETs for high side switching applications. It contains a completely...
Datasheet
LT1910 on Analog.com
LT1236
Production
The LT1236 is a precision reference that combines ultralow drift and noise with excellent long-term stability and high output accuracy. The reference output...
Datasheet
LT1236 on Analog.com
LTC2380-16
Production
The LTC2380-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2380-16 has...
Datasheet
LTC2380-16 on Analog.com
LTC2325-16
Production
The LTC2325-16 is a low noise, high speed quad 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode range...
Datasheet
LTC2325-16 on Analog.com
LT80605
Recommended for New Designs
The LT80605 step-down regulator features the Silent
Switcher® architecture to minimize EMI emissions while
delivering high efficiency at frequencies up...
Datasheet
LT80605 on Analog.com
LT5502
Production
The LT5502 is a 70MHz to 400MHz monolithic integrated quadrature IF demodulator. It consists of an IF limiter, quadrature down mixers, integrated lowpass...
Datasheet
LT5502 on Analog.com
LTC3727
Production
The LTC3727/LTC3727-1 are high performance dual step-down switching regulator controllers that drive all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3727 on Analog.com
LT1394
Production
The LT1394 is an UltraFast (7ns) comparator with complementary outputs and latch. The input common mode range extends from 1.5V below the positive supply...
Datasheet
LT1394 on Analog.com
LTC1156
Production
The LTC1156 quad High side gate driver allows using low cost N-channel FETs for high side switching applications. An internal charge pump boosts the gate...
Datasheet
LTC1156 on Analog.com
LTC1998
Production
The LTC1998 is a micropower comparator and a precision adjustable reference in a 6-pin SOT-23 package that is optimized for lithium-ion low battery detection...
Datasheet
LTC1998 on Analog.com
LT1218
Production
The LT1218/LT1219 are bipolar op amps which combine rail-to-rail input and output operation with precision specifications. Unlike other rail-to-rail amplifiers...
Datasheet
LT1218 on Analog.com
LT1029
Production
The LT1029 is a 5V bandgap reference intended for use in the shunt or “Zener” mode, allowing it to be used as either a positive or negative reference....
Datasheet
LT1029 on Analog.com
LTC3884
Recommended for New Designs
The LTC3884/LTC3884-1 are dual output PolyPhase DC/DC synchronous step-down switching regulator controllers with an I2C-based PMBus compliant serial interface...
Datasheet
LTC3884 on Analog.com
LT4430
Production
The LT4430 drives the opto-coupler that crosses the galvanic barrier in an isolated power supply. The IC contains a precision-trimmed reference, a high...
Datasheet
LT4430 on Analog.com
LTC2875
Production
The LTC2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data...
Datasheet
LTC2875 on Analog.com
LT8550
Recommended for New Designs
The LT8550 is a multiphase expander for synchronous buck DC/DC converters. It operates in tandem with any buck DC/DC converter to increase the load current...
Datasheet
LT8550 on Analog.com
LT8277
Recommended for New Designs
The LT8277 is a 2-phase constant frequency, current
mode boost and SEPIC controller that drives N-channel
power MOSFETs. The 2-phase interleaved operation...
Datasheet
LT8277 on Analog.com
LTC1878
Production
The LTC1878 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC1878 on Analog.com
LT3763
Production
The LT3763 is a fixed frequency, synchronous, step-down DC/DC controller designed to accurately regulate output currents up to 20A. The average current...
Datasheet
LT3763 on Analog.com
LTC4266A_C
Recommended for New Designs
The LTC4266A is a quad power sourcing equipment (PSE) controller capable of delivering up to 90W of LTPoE++ power to a compatible LTPoE++ powered device...
Datasheet
LTC4266A_C on Analog.com
LTC6915
Production
The LTC6915 is a precision programmable gain instrumentation amplifier. The gain can be programmed to 0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048...
Datasheet
LTC6915 on Analog.com
LTM8028
Recommended for New Designs
The LTM8028 is a 36VIN, 5A µModule® (power module) regulator, consisting of an UltraFast™ 5A linear regulator preceded by a high efficiency switching regulator...
Datasheet
LTM8028 on Analog.com
LTC2920
Recommended for New Designs
The LTC2920 allows power supplies and power supply module output voltages to be precisely adjusted both up and down for automated PCB testing. The power...
Datasheet
LTC2920 on Analog.com
LTC2956
Recommended for New Designs
The LTC2956 is a micropower, wide input voltage range, configurable wake-up timer with pushbutton control. It periodically wakes up and turns on a connected...
Datasheet
LTC2956 on Analog.com
LTC4069-4.4
Production
The LTC4069-4.4 is a complete constant-current/constant-voltage linear charger for high capacity single-cell lithium-ion batteries with a 4.4V float voltage...
Datasheet
LTC4069-4.4 on Analog.com
LTC4251B
Recommended for New Designs
The LTC4251B/LTC4251B-1/LTC4251B-2 negative voltage Hot Swapâ„¢ controllers allow a board to be safely inserted and removed from a live backplane. Output...
Datasheet
LTC4251B on Analog.com
LTC2193
Production
The LTC2195/LTC2194/LTC2193 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2193 on Analog.com
LTC1755
Production
The LTC1755/LTC1756 universal Smart Card interfaces are fully compliant with ISO 7816-3 and EMV specifications. The parts provide the smallest and simplest...
Datasheet
LTC1755 on Analog.com
LT1330
Production
The LT1330 is a three driver, five receiver RS232 transceiver with low supply current. Designed to interface with new 3V logic, the LT1330 operates with...
Datasheet
LT1330 on Analog.com
LTC3859A
Production
The LTC3859A is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET...
Datasheet
LTC3859A on Analog.com
LTC3714
Production
The LTC3714 is a synchronous step-down switching regulator controller for CPU power. An output voltage between 0.6V and 1.75V is selected by a 5-bit code...
Datasheet
LTC3714 on Analog.com
LT1997-2
Recommended for New Designs
The LT1997-2 is an attenuating (funnel) difference amplifier
that can be used to translate large differential signals to
the low voltage range compatible...
Datasheet
LT1997-2 on Analog.com
LTC3421
Production
The LTC3421 is a high efficiency, current mode, fixed frequency, step-up DC/DC converter with true output disconnect and inrush current limiting. The device...
Datasheet
LTC3421 on Analog.com
LTC1669
Production
The LTC1669 is a 10-bit voltage output DAC with true buffered rail-to-rail output voltage capability. It operates from a single supply with a range of...
Datasheet
LTC1669 on Analog.com
LTC1329
Production
The LTC1329-10/LTC1329-50 are micropower 8-bit current output D/A converters (DACs) with an output range of 0µA to 10µA and 0µA to 50µA for the -10 and...
Datasheet
LTC1329 on Analog.com
LTC9101-1
Recommended for New Designs
The LTC9101-1/LTC9102/LTC9103 chipset is a 48-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 2, 802.3bt Type 3 and...
Datasheet
LTC9101-1 on Analog.com
LTC4244
Production
The LTC4244/LTC4244-1 are Hot Swap™ controllers that allow a board to be safely inserted into and removed from a CompactPCI™ bus slot. External N-channel...
Datasheet
LTC4244 on Analog.com
LT5554
Production
The LT5554 is a 7-bit digitally controlled programmable gain (PG) amplifier with 16dB gain control range. It consists of a 50O input variable attenuator...
Datasheet
LT5554 on Analog.com
LT3082
Recommended for New Designs
The LT3082 is a 200mA low dropout linear regulator that can be paralleled to increase output current or spread heat in surface mounted boards. Architected...
Datasheet
LT3082 on Analog.com
LTC2230
Production
The LTC2230 and LTC2231 are 170Msps/135Msps, sampling 10-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2230...
Datasheet
LTC2230 on Analog.com
LT3685
Production
The LT3685 is an adjustable frequency (200kHz to 2.4MHz) monolithic step-down switching regulator that accepts input voltages up to 38V operating and 60V...
LT3685 on Analog.com
LT1805
Production
The LT1803/LT1804/LT1805 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT1805 on Analog.com
LTC1551L
Production
The LTC1550L/LTC1551L are switched capacitor charge pump voltage inverters which include internal linear post-regulators to minimize output ripple. The...
Datasheet
LTC1551L on Analog.com
LT8646S
Recommended for New Designs
The LT8645S/LT8646S synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI emissions while delivering...
Datasheet
LT8646S on Analog.com
LTC3124
Recommended for New Designs
The LTC3124 is a dual-phase, synchronous step-up DC/DC converter with true output disconnect and inrush current limiting capable of providing output voltages...
Datasheet
LTC3124 on Analog.com
LTC2972
Recommended for New Designs
The LTC2972 is a 2-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2972 on Analog.com
LTC1450
Production
The LTC1450/LTC1450L are complete single supply, rail-to-rail voltage output, 12-bit digital-to-analog converters (DACs) in a 24-pin SSOP or PDIP package...
Datasheet
LTC1450 on Analog.com
LTC1475
Production
The LTC1474/LTC1475 series are high efficiency step-down converters with internal P-channel MOSFET power switches that draw only 10µA typical DC supply...
Datasheet
LTC1475 on Analog.com
LT6017
Recommended for New Designs
The LT6015/LT6016/LT6017 are single/dual/quad rail-to-rail input operational amplifiers with input offset voltage trimmed to less than 50µV. These amplifiers...
Datasheet
LT6017 on Analog.com
LTC2607
Production
The LTC2607/LTC2617/LTC2627 are dual 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 12-lead DFN package. They have built-in high...
Datasheet
LTC2607 on Analog.com
LTC3104
Recommended for New Designs
The LTC3104 is a high efficiency, monolithic synchronous step-down converter using a current mode architecture capable of supplying 300mA of output current...
Datasheet
LTC3104 on Analog.com
LTC2065
Recommended for New Designs
The LTC2063/LTC2064/LTC2065 are single, dual, and quad low power, zero-drift, 20kHz amplifiers. The LTC2063/LTC2064/LTC2065 enable high resolution measurement...
Datasheet
LTC2065 on Analog.com
LTC1164-7
Production
The LTC1164-7 is a low power, clock-tunable monolithic 8th order lowpass filter with linear passband phase and flat group delay. The amplitude response...
Datasheet
LTC1164-7 on Analog.com
LTM4648
Recommended for New Designs
The LTM4648 is a 10A low VIN step-down DC/DC μModule® (micromodule) regulator. Included in the package are the switching controller, power FETs, inductor...
Datasheet
LTM4648 on Analog.com
LT1007X
Obsolete
Datasheet
LT1007X on Analog.com
LT1632
Production
The LT1632/LT1633 have excellent DC precision over the full range of operation. Input offset voltage is typically less than 400µV and the minimum open...
Datasheet
LT1632 on Analog.com
LTC6430-15
Recommended for New Designs
The LTC6430-15 is a differential gain block amplifier designed to drive high resolution, high speed ADCs with excellent linearity beyond 1000MHz and with...
Datasheet
LTC6430-15 on Analog.com
LT5568
Production
The LT5568 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5568 on Analog.com
LT1113
Production
The LT1113 achieves a new standard of excellence in noise performance for a dual JFET op amp. The 4.5nV/√Hz 1kHz noise combined with low current noise...
Datasheet
LT1113 on Analog.com
LT8490
Recommended for New Designs
The LT8490 is a buck-boost switching regulator battery charger that implements a constant-current constantvoltage (CCCV) charging profile used for most...
Datasheet
LT8490 on Analog.com
LT3070-1
Recommended for New Designs
The LT3070-1 is a low voltage, Ultrafast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage...
Datasheet
LT3070-1 on Analog.com
LT1002
Production
The LT1002 dual, matched precision operational amplifiers combine excellent individual amplifier performance with tight matching and temperature tracking...
Datasheet
LT1002 on Analog.com
LTC7545A
Production
The LTC7545A is a 12-bit multiplying digital-to-analog converter (DAC) with a microprocessor compatible parallel input. It is a superior pin compatible...
Datasheet
LTC7545A on Analog.com
LTC1401
Production
The LTC1401 is a complete 200ksps, 12-bit A/D converter that converts 0V to 2.048V unipolar input and draws only 15mW from a single 3V supply. This easy...
Datasheet
LTC1401 on Analog.com
LT1713
Production
The LT1713/LT1714 are UltraFast™ 7ns, single/dual comparators featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized...
Datasheet
LT1713 on Analog.com
LTC1274
Production
The LTC1274/LTC1277 are 8µs sampling 12-bit A/D converters which draw only 2mA (typ) from single 5V or ±5V supplies. These easy-to-use devices come complete...
Datasheet
LTC1274 on Analog.com
LT3469
Production
The LT3469 is a transconductance (gm) amplifier that can drive outputs up to 33V from a 5V or 12V supply. An internal switching regulator generates a boosted...
Datasheet
LT3469 on Analog.com
LT3063
Recommended for New Designs
The LT3063 is a micropower, low dropout (LDO) linear regulator that operates over a 1.6V to 45V supply range and is available in a series of fixed output...
Datasheet
LT3063 on Analog.com
LT338A
Obsolete
Most H (Metal Can), J (Ceramic), and K (Metal Can) Packages from Analog Devices Are Obsolete
The LT138A series of adjustable regulators provide 5A output...
Datasheet
LT338A on Analog.com
LT4239
Recommended for New Designs
The LT4239 hot swap controller allows a board to be safely inserted and removed from a live backplane. Using external N-channel pass transistors, board...
Datasheet
LT4239 on Analog.com
LTC3606B
Production
The LTC3606B is an 800mA monolithic synchronous buck regulator using a constant frequency current mode architecture.
The input supply voltage range is...
Datasheet
LTC3606B on Analog.com
LT1354
Production
The LT1354 is a low power, high speed, high slew rate operational amplifier with outstanding AC and DC performance. The LT1354 has much lower supply current...
Datasheet
LT1354 on Analog.com
LT1806
Production
The LT1806/LT1807 are single/dual low noise rail-to-rail input and output unity-gain stable op amps that feature a 325MHz gain-bandwidth product, a 140V...
Datasheet
LT1806 on Analog.com
LTC2321-12
Production
The LTC2321-12 is a low noise, high speed dual 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2321-12 on Analog.com
LT1082
Production
The LT1082 is a monolithic high voltage switching regulator. It can be operated in all standard switching configurations including buck, boost, flyback...
Datasheet
LT1082 on Analog.com
LTC1629
Production
The LTC1629/LTC1629-PG are multiple phase, dual, synchronous step-down current mode switching regulator controllers that drive N-channel external power...
Datasheet
LTC1629 on Analog.com
LT1132A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1132A on Analog.com
LT1577
Production
The LT1575/LT1577 are single/dual controller ICs that drive low cost external N-channel MOSFETs as source followers to produce ultrafast transient response...
Datasheet
LT1577 on Analog.com
LTC1842
Production
The LTC1842 is an ultralow power dual comparator with a built-in reference. The comparators feature less than 5.7µA supply current over temperature, a...
Datasheet
LTC1842 on Analog.com
LT1959
Production
The LT1959 is a 500kHz monolithic buck mode switching regulator functionally identical to the LT1506 but optimized for lower output voltage applications...
Datasheet
LT1959 on Analog.com
LTC3552-1
Production
The LTC3552-1 is a complete constant-current/constant-voltage linear charger and dual fixed output DC/DC converter for single cell lithium-ion batteries...
Datasheet
LTC3552-1 on Analog.com
LTC2310-12
Production
The LTC2310-12 is a low noise, high speed 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2310-12 on Analog.com
LT1242
Production
The LT1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry...
Datasheet
LT1242 on Analog.com
LTC6995-1
Production
The LTC6995 is a silicon oscillator with a programmable period range of 1.024ms to 9.54 hours (29.1μHz to 977Hz), specifically intended for long duration...
Datasheet
LTC6995-1 on Analog.com
LTC1335
Production
The LTC1321/LTC1322/LTC1335 are low power CMOS bidirectional transceivers, each featuring two reconfigurable interface ports. Each can be configured as...
Datasheet
LTC1335 on Analog.com
LTC3411A
Production
The LTC3411A is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input...
Datasheet
LTC3411A on Analog.com
LT1072
Production
The LT®1072 is a monolithic high power switching regulator. It can be operated in all standard switching configurations including buck, boost, flyback...
Datasheet
LT1072 on Analog.com
LTC4414
Recommended for New Designs
The LTC4414 controls an external P-channel MOSFET to create a near ideal diode function for power switchover. This permits highly efficient OR’ing of multiple...
Datasheet
LTC4414 on Analog.com
LT1491A
Production
The LT1490A/LT1491A are dual and quad op amps with a low input offset voltage of 500µV max. The LT1490A/LT1491A operate on all single and split supplies...
Datasheet
LT1491A on Analog.com
LT8253
Recommended for New Designs
The LT8253/LT8253A are synchronous 4-switch buck-boost controllers optimized for automotive USB-C power delivery. The LT8253/LT8253A are fully compliant...
Datasheet
LT8253 on Analog.com
LTC4222
Production
The LTC4222 Hot Swap™ controller allows two power paths to be safely inserted and removed from a live backplane. Using external N-channel pass transistors...
Datasheet
LTC4222 on Analog.com
LT8330
Recommended for New Designs
The LT8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured...
Datasheet
LT8330 on Analog.com
LTC5577
Production
The LTC5577 active mixer is optimized for RF downconverting applications that require high input signal handling capability and wide bandwidth. The wideband...
Datasheet
LTC5577 on Analog.com
LT1527A
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1525A and LT1527A are improved general purpose switching...
Datasheet
LT1527A on Analog.com
LT1790
Production
The LT1790 is a family of SOT-23 micropower low dropout series references that combine high accuracy and low drift with low power dissipation and small...
Datasheet
LT1790 on Analog.com
LT3684
Production
The LT3684 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high...
Datasheet
LT3684 on Analog.com
LT6658
Recommended for New Designs
The LT6658 is a family of precision dual output references combining the performance of a precision voltage reference and a linear regulator that we call...
Datasheet
LT6658 on Analog.com
LTC8043
Production
The LTC8043 is a serial-input 12-bit multiplying digital-to-analog converter (DAC). It is a superior pin compatible replacement for the DAC-8043. Improvements...
Datasheet
LTC8043 on Analog.com
LTC1439
Production
The LTC1438/LTC1439 are dual, synchronous stepdown switching regulator controllers which drive external N-channel power MOSFETs in a phase-lockable fixed...
Datasheet
LTC1439 on Analog.com
LT1997-1
Recommended for New Designs
The LT1997-1 is a difference amplifier that can be used to amplify small differential signals while rejecting large common mode signals making it an ideal...
Datasheet
LT1997-1 on Analog.com
LTC2299
Production
The LTC2299 is a 14-bit 80Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2299 is perfect...
Datasheet
LTC2299 on Analog.com
LTC1650
Production
The LTC1650 is a deglitched rail-to-rail voltage output 16-bit digital-to-analog converter (DAC) available in a 16-pin narrow SO package. It has 16-bit...
Datasheet
LTC1650 on Analog.com
LTC2450-1
Production
The LTC2450-1 is a low power, ultra-tiny 16-bit analog-to-digital converter designed for space constrained applications requiring 16-bit performance. The...
Datasheet
LTC2450-1 on Analog.com
LTC5543
Production
The LTC5543 is part of a family of high dynamic range, high gain passive downconverting mixers covering the 600MHz to 4GHz frequency range. The LTC5543...
Datasheet
LTC5543 on Analog.com
LTC4259A
Not Recommended for New Designs
The LTC4259A is a quad –48V Hot Swap™ controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment (PSE). It consists of four independent...
Datasheet
LTC4259A on Analog.com
LTC6252
Last Time Buy
The LTC6252/LTC6253/LTC6254 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 3.5mA...
LTC6252 on Analog.com
LTC1196
Production
The LTC1196/LTC1198 are 600ns, 8-bit A/D converters with sampling rates up to 1MHz. They are offered in 8-pin SO packages and operate on 3V to 6V supplies...
Datasheet
LTC1196 on Analog.com
LT4423
Recommended for New Designs
The LT®4423 is a 1.9V to 28V ideal diode and load switch
with integrated P-channel MOSFETs. When enabled,
15mV forward voltage regulation minimizes power...
Datasheet
LT4423 on Analog.com
LT3030
Recommended for New Designs
The LT3030 is a dual, micropower, low noise, low dropout linear regulator. The device operates with either common or independent input supplies for each...
Datasheet
LT3030 on Analog.com
LTC2802
Production
The LTC2801/LTC2802/LTC2803/LTC2804 are single and dual RS-232 transceivers in narrow SSOP and chip-scale DFN packages. All operate over a supply range...
Datasheet
LTC2802 on Analog.com
LTC2314-14
Production
The LTC2314-14 is a 14-bit, 4.5Msps, serial sampling A/D converter that draws only 6.2mA from a wide range analog supply adjustable from 2.7V to 5.25V...
Datasheet
LTC2314-14 on Analog.com
LTC693
Production
The LTC692/LTC693 provide complete power supply monitoring and battery control functions for microprocessor reset, battery backup, CMOS RAM write protection...
Datasheet
LTC693 on Analog.com
LTC4446
Production
The LTC4446 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a DC/DC converter with supply voltages up to 100V. The powerful...
Datasheet
LTC4446 on Analog.com
LT3942
Recommended for New Designs
The LT3942 is a monolithic 4-switch synchronous buck-boost converter with constant voltage and constant current regulation, suitable for both voltage regulator...
Datasheet
LT3942 on Analog.com
LT1997-3
Recommended for New Designs
The LT1997-3 combines a precision operational amplifier with highly-matched resistors to form a one-chip solution for accurately amplifying voltages. Gains...
Datasheet
LT1997-3 on Analog.com
LTC2284
Production
The LTC2284 is a 14-bit 105Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2284 is perfect...
Datasheet
LTC2284 on Analog.com
LT1724
Last Time Buy
The LT1722/LT1723/LT1724 are single/dual/quad, low noise, low power, high speed operational amplifiers. These products feature lower input offset voltage...
Datasheet
LT1724 on Analog.com
LTC2604
Production
The LTC2604/LTC2614/LTC2624 are quad 16-,14- and 12-bit 2.5V to 5.5V rail-to-rail voltage output DACs in 16-lead narrow SSOP packages. These parts have...
Datasheet
LTC2604 on Analog.com
LT3089
Recommended for New Designs
The LT3089 is an 800mA low dropout linear regulator designed for rugged industrial applications. Key features of the IC are the extended safe operating...
Datasheet
LT3089 on Analog.com
LT3094
Recommended for New Designs
The LT3094 is a high performance low dropout negative linear regulator featuring ADI’s ultralow noise and ultrahigh PSRR architecture for powering noise...
Datasheet
LT3094 on Analog.com
LTC2380-24
Production
The LTC2380-24 is a low noise, low power, high speed 24-bit successive approximation register (SAR) ADC with an integrated digital averaging filter. Operating...
Datasheet
LTC2380-24 on Analog.com
LTC4012-3
Production
The LTC4012-3 is a constant-current/constant-voltage battery charger controller. It uses a synchronous quasiconstant frequency PWM control architecture...
Datasheet
LTC4012-3 on Analog.com
LT1498
Production
The LT1498/LT1499 are dual/quad, rail-to-rail input and output precision C-Load™ op amps with a 10MHz gain bandwidth product and a 6V/µs slew rate.
The...
Datasheet
LT1498 on Analog.com
LTC6102
Production
The LTC6102/LTC6102HV are versatile, high voltage, highside current sense amplifiers. Their high supply voltage rating allows their use in many high side...
Datasheet
LTC6102 on Analog.com
LTC3406B
Production
The LTC3406B is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available...
Datasheet
LTC3406B on Analog.com
LTC1437A
Production
The LTC1436A/LTC1437A are synchronous step-down switching regulator controllers that drive external N-channel power MOSFETs in a phase lockable, fixed...
Datasheet
LTC1437A on Analog.com
LTC2978A
Not Recommended for New Designs
The LTC2978A is an 8-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault...
Datasheet
LTC2978A on Analog.com
LTC2492
Production
The LTC2492 is a 4-channel (2-channel differential), 24-bit, No Latency ?S™ ADC with Easy Drive technology. The patented sampling scheme eliminates dynamic...
Datasheet
LTC2492 on Analog.com
LTC4120
Recommended for New Designs
The LTC4120 is a constant-current/constant-voltage wireless receiver and battery charger. An external programming resistor sets the charge current up to...
Datasheet
LTC4120 on Analog.com
LT6372-1
Recommended for New Designs
The LT6372-1 is a gain programmable, high precision instrumentation amplifier that delivers industry leading DC precision. This high precision enables...
Datasheet
LT6372-1 on Analog.com
LT3050
Recommended for New Designs
The LT3050 series are micro-power, low noise, low dropout voltage (LDO) linear regulators. The devices supply 100mA of output current with a dropout voltage...
Datasheet
LT3050 on Analog.com
LT3048
Production
The LT3048 series generate low noise, low ripple bias supplies from input voltages of 2.7V to 4.8V.
The LT3048 includes a boost regulator and a LDO linear...
Datasheet
LT3048 on Analog.com
LT1494
Production
The LT1494/LT1495/LT1496 are the lowest power (IS = 1.5µA) op amps with precision specifications. The extremely low supply current is combined with excellent...
Datasheet
LT1494 on Analog.com
LT1676
Production
The LT1676 is a wide input range, high efficiency Buck (step-down) switching regulator. The monolithic die includes all oscillator, control and protection...
Datasheet
LT1676 on Analog.com
LTC4263-1
Recommended for New Designs
The LTC4263-1 is a high power, single PSE controller for use in Power over Ethernet systems. The internal current limit and short-circuit protection are...
Datasheet
LTC4263-1 on Analog.com
LTC3532
Production
The LTC3532 is a high efficiency, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3532 on Analog.com
LT3028
Recommended for New Designs
The LT3028 is a dual, micropower, low noise, low dropout regulator with independent inputs. With an external 0.01µF bypass capacitor, output noise is a...
Datasheet
LT3028 on Analog.com
LT1369
Production
The LT1366/LT1367/LT1368/LT1369 are dual and quad bipolar op amps which combine rail-to-rail input and output operation with precision specifications....
Datasheet
LT1369 on Analog.com
LTC1064-1
Production
The LTC1064-1 is an 8th order, clock sweepable elliptic (Cauer) lowpass switched capacitor filter. The passband ripple is typically ±0.15dB, and the stopband...
Datasheet
LTC1064-1 on Analog.com
LTM4682
Recommended for New Designs
The LTM®4682 is a quad 31.25A or single 125A step-down
power μModule® (power micromodule) DC/DC regulator
featuring remote configurability and telemetry...
Datasheet
LTM4682 on Analog.com
LTC4089-3
Recommended for New Designs
The LTC4089-3 is a USB power manager plus high voltage Li-Ion battery charger. This device controls the total current used by the USB peripheral for operation...
Datasheet
LTC4089-3 on Analog.com
LTC6907
Not Recommended for New Designs
The LTC6907 is a precision programmable oscillator that is versatile, compact and easy to use. Micropower operation benefits portable and battery-powered...
Datasheet
LTC6907 on Analog.com
LT1244
Production
The LT1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry...
Datasheet
LT1244 on Analog.com
LTC3726
Not Recommended for New Designs
The LTC3726 is a secondary-side controller for synchronous forward converters. When used in conjunction with the LTC3705/LTC3725 gate driver and primary...
Datasheet
LTC3726 on Analog.com
LTC3402
Production
The LTC3402 is a high efficiency, fixed frequency, step-up DC/DC converter that operates from an input voltage below 1V. The device includes a 0.16O N...
Datasheet
LTC3402 on Analog.com
LTC6362
Last Time Buy
The LTC6362 is a low power, low noise differential op amp with rail-to-rail input and output swing that has been optimized to drive low power SAR ADCs...
LTC6362 on Analog.com
LT6553
Production
The LT6553 is a high-speed triple video amplifier with an internally fixed gain of 2. The individual amplifiers are optimized for performance with a double...
Datasheet
LT6553 on Analog.com
LTC1327
Production
The LTC1327 is an advanced low power, three-driver/five-receiver EIA/TIA-562 transceiver. In the no load condition, the supply current is only 300µA. The...
Datasheet
LTC1327 on Analog.com
LT1509
Production
The LT1509 is a complete solution for universal off-line switching power supplies utilizing active power factor correction. The PFC section is identical...
Datasheet
LT1509 on Analog.com
LTC6416
Recommended for New Designs
The LTC6416 is a differential unity gain buffer designed to drive 16-bit ADCs with extremely low output noise and excellent linearity beyond 300MHz. Differential...
Datasheet
LTC6416 on Analog.com
LT8673
Recommended for New Designs
The LT8673 is an active rectifier controller for reverse input protection that includes two independent low IQ comparators with programmable glitch rejection...
Datasheet
LT8673 on Analog.com
LT1800
Production
The LT1800 is a low power, high speed rail-to-rail input and output operational amplifier with excellent DC performance. The LT1800 features reduced supply...
Datasheet
LT1800 on Analog.com
LTC9101-2
Recommended for New Designs
The LTC®9101-2/LTC9102 chipset is a 12/24-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3bt Type 3 and 4 compliant Power...
Datasheet
LTC9101-2 on Analog.com
LTC2333-18
Production
The LTC2333-18 is an 18-bit, low noise 8-channel multiplexed successive approximation register (SAR) ADC with buffered differential, wide common mode range...
Datasheet
LTC2333-18 on Analog.com
LT1328
Production
The LT1328 is a photodiode receiver that supports IrDA® data rates up to 4Mbps as well as other modulation methods such as Sharp ASK and TV remote control...
Datasheet
LT1328 on Analog.com
LT3033
Recommended for New Designs
The LT3033 is a very low dropout voltage (VLDOâ„¢) linear regulator that operates from a single input supply down to 0.95V. The device supplies 3A output...
Datasheet
LT3033 on Analog.com
LTC6404
Last Time Buy
The LTC6404 is a family of AC precision, very low noise, low distortion, fully differential input/output amplifiers optimized for 3V, single supply operation...
LTC6404 on Analog.com
LT1671
Production
The LT1671 is a low power 60ns comparator with complementary outputs and latch. The input common mode range extends from 1.5V below the positive supply...
Datasheet
LT1671 on Analog.com
LTC3772
Production
The LTC3772 is a constant frequency current mode step-down DC/DC controller in a low profile 8-lead SOT-23 (ThinSOT™) and a 3mm × 2mm DFN package. The...
Datasheet
LTC3772 on Analog.com
LTC1733
Production
The LTC1733 is a standalone constant-current/constant-voltage linear charger for lithium-ion batteries with an on-chip power MOSFET. Internal thermal feedback...
Datasheet
LTC1733 on Analog.com
LTC3870
Recommended for New Designs
The LTC3870 is a PolyPhase® step-down slave controller specially designed for multiphase operation with the LTC3880 family digital power system management...
Datasheet
LTC3870 on Analog.com
LT1795
Production
The LT1795 is a dual current feedback amplifier with high output current and excellent large signal characteristics. The combination of high slew rate...
Datasheet
LT1795 on Analog.com
LTC7817
Recommended for New Designs
The LTC7817 is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET...
Datasheet
LTC7817 on Analog.com
LTC1708-PG
Production
The LTC1708 is a dual adjustable 5-bit VID programmable step-down switching regulator controller that drives all N-Channel power MOSFET stages. A constant...
Datasheet
LTC1708-PG on Analog.com
LTM4602HV
Production
The LTM4602HV is a complete 6A, DC/DC step down power supply with up to 28V input operation. Included in the package are the switching controller, power...
Datasheet
LTM4602HV on Analog.com
LTC7062
Recommended for New Designs
The LTC7062 drives two high-side N-Channel MOSFETs with supply voltages up to 100V. Both drivers can operate with a different ground reference, providing...
Datasheet
LTC7062 on Analog.com
LT1032
Production
The LT1032 is a RS232 and RS423 line driver that operates over a ±5V to ±15V range on low supply current and can be shut down to zero supply current. Outputs...
Datasheet
LT1032 on Analog.com
LT3651-8.2
Recommended for New Designs
The LT3651-8.2/LT3651-8.4 are 2-cell, 4A Li-Ion/Polymer battery chargers that operate over a 9V to 32V input voltage range. An efficient monolithic average...
Datasheet
LT3651-8.2 on Analog.com
LTC3736-1
Production
The LTC3736-1 is a 2-phase dual synchronous stepdown switching regulator controller with tracking that drives external complementary power MOSFETs using...
Datasheet
LTC3736-1 on Analog.com
LTC3331
Recommended for New Designs
The LTC3331 integrates a high voltage energy harvesting power supply plus a buck-boost DC/DC powered from a rechargeable battery to create a single output...
Datasheet
LTC3331 on Analog.com
LTC1860L
Production
The LTC1860L/LTC1861L are 12-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 3V supply. At 150ksps, the supply current...
Datasheet
LTC1860L on Analog.com
LTC3450
Recommended for New Designs
The LTC3450 is a complete power converter solution for small thin film transistor (TFT) liquid crystal display (LCD) panels. The device operates from a...
Datasheet
LTC3450 on Analog.com
LT1639
Production
The LT1638 is a low power dual rail-to-rail input and output operational amplifier available in the standard 8-pin PDIP and SO packages as well as the...
Datasheet
LT1639 on Analog.com
LT1786F
Production
The LT1786F is a fixed frequency, current mode, switching regulator that provides the control function for Cold Cathode Fluorescent Lighting (CCFL). The...
Datasheet
LT1786F on Analog.com
LT1801
Production
The LT1801/LT1802 are dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance. The LT1801/LT1802...
Datasheet
LT1801 on Analog.com
LTC4090
Production
The LTC4090/LTC4090-5 are USB power managers plus high voltage Li-Ion/Polymer battery chargers. The devices control the total current used by the USB peripheral...
Datasheet
LTC4090 on Analog.com
LTC3414
Production
The LTC3414 is a high efficiency monolithic synchronous, step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3414 on Analog.com
LTC1698
Production
The LTC1698 is a precision secondary-side forward converter controller that synchronously drives external N-channel MOSFETs. It is designed for use with...
Datasheet
LTC1698 on Analog.com
LTC2164
Production
The LTC2165/LTC2164/LTC2163 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2164 on Analog.com
LTC1864
Production
The LTC1864/LTC1865 are 16-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 5V supply. At 250ksps, the supply current...
Datasheet
LTC1864 on Analog.com
LT3074
Recommended for New Designs
The LT3074 is a low voltage, ultralow noise, and ultrafast
transient response linear regulator with a PMBus serial
interface. The device supplies up to...
Datasheet
LT3074 on Analog.com
LT8304
Recommended for New Designs
The LT8304/LT8304-1 are monolithic micropower isolated flyback converters. By sampling the isolated output voltage directly from the primary-side flyback...
Datasheet
LT8304 on Analog.com
LTC2360
Production
The LTC2360/LTC2361/LTC2362 are 100ksps/250ksps/500ksps, 12-bit, sampling A/D converters that draw only 0.5mA, 0.75mA and 1.1mA, respectively, from a single...
Datasheet
LTC2360 on Analog.com
LT1076-5
Production
The LT1076-5 is a 2A fixed 5V output monolithic bipolar switching regulator which requires only a few external parts for normal operation. The power switch...
Datasheet
LT1076-5 on Analog.com
LTC6257
Last Time Buy
The LTC6255/LTC6256/LTC6257 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6257 on Analog.com
LT3692
Production
The LT3692 is a dual current mode PWM step-down DC/DC converter with two internal 3.8A switches. Independent input voltage, shutdown, feedback, soft-start...
Datasheet
LT3692 on Analog.com
LTC1545
Production
The LTC1545 is a 5-driver/5-receiver multiprotocol transceiver. The LTC1545 and LTC1543 form the core of a complete software-selectable DTE or DCE interface...
Datasheet
LTC1545 on Analog.com
LTC2289
Production
The LTC2289 is a 10-bit 80Msps, low noise 3V dual A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2289 is perfect...
Datasheet
LTC2289 on Analog.com
LTM8032
Production
The LTM8032 is an electromagnetic compatible (EMC) 36V, 2A DC/DC step-down µModule® (power module) regulator designed to meet the radiated emissions requirements...
Datasheet
LTM8032 on Analog.com
LTC1559
Not Recommended for New Designs
Not Recommended For New Designs. Contact Analog Devices for Potential Replacement.
The LTC1559 is a backup battery controller that provides all the functions...
Datasheet
LTC1559 on Analog.com
LTC4332
Recommended for New Designs
The LTC4332 is a point-to-point rugged SPI extender designed for operation in high noise industrial environments over long distances. Using a ±60V fault...
Datasheet
LTC4332 on Analog.com
LTC6990
Production
The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled...
Datasheet
LTC6990 on Analog.com
LTM4638
Recommended for New Designs
The LTM4638 is a complete 15A step-down switching mode µModule (power module) regulator in a tiny 6.25mm × 6.25mm × 5.02mm BGA package. Included in...
Datasheet
LTM4638 on Analog.com
LTC4365
Recommended for New Designs
The LTC4365 protects applications where power supply input voltages may be too high, too low or even negative. It does this by controlling the gate voltages...
LTC4365 on Analog.com
LTC2942-1
Obsolete
The LTC2942-1 measures battery charge state, battery voltage and chip temperature in handheld PC and portable product applications. Its operating range...
Datasheet
LTC2942-1 on Analog.com
LTM2893
Production
The LTM2893 is a high speed isolated µModule (micromodule) SPI interface with ADC control signals. The LTM2893 is optimized for isolating 1Msps high resolution...
Datasheet
LTM2893 on Analog.com
LTC2986
Recommended for New Designs
The LTC2986 measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution...
LTC2986 on Analog.com
LTC1854
Production
The LTC1854/LTC1855/LTC1856 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These ADCs operate from a single 5V...
Datasheet
LTC1854 on Analog.com
LT8610A
Production
The LT8610A/LT8610AB series are compact, high efficiency, high speed synchronous monolithic step-down switching regulators that consume only 2.5μA of...
Datasheet
LT8610A on Analog.com
LT1783
Production
The LT1783 is a 1.25MHz op amp available in the small SOT-23 package that operates on all single and split supplies with a total voltage of 2.5V to 18V...
Datasheet
LT1783 on Analog.com
LTC1871
Production
The LTC1871 is a wide input range, current mode, boost, flyback or SEPIC controller that drives an N-channel power MOSFET and requires very few external...
Datasheet
LTC1871 on Analog.com
LTC2992
Recommended for New Designs
The LTC2992 is a rail-to-rail system monitor that measures current, voltage, and power of two supplies. It features an operating range of 2.7V to 100V...
Datasheet
LTC2992 on Analog.com
LT4201
Recommended for New Designs
The LT4201 provides a compact hot-swap solution with an internal
power metal-oxide semiconductor field effect transistor (MOSFET),
enabling a circuit board...
Datasheet
LT4201 on Analog.com
LT1381
Production
The LT1381 is a dual RS232 driver/receiver pair with integral charge pump to generate RS232 voltage levels from a single 5V supply. The circuit features...
Datasheet
LT1381 on Analog.com
LTC2751
Production
The LTC2751 is a family of 12-, 14-, and 16-bit multiplying parallel-input, current-output DACs. They operate from a single 2.7V to 5.5V supply. All parts...
Datasheet
LTC2751 on Analog.com
LTC7065
Recommended for New Designs
The LTC7065 is a half-bridge dual N-Channel MOSFET gate driver that operates at up to 100V input voltage and features a supply independent three-state...
LTC7065 on Analog.com
LTC3765
Recommended for New Designs
The LTC3765 is a start-up controller and gate driver for use in a self-starting secondary-side control forward converter. When combined with the LTC3766...
Datasheet
LTC3765 on Analog.com
LT1191
Obsolete
The LT1191 is a video operational amplifier optimized for operation on ±5V and a single 5V supply. Unlike many high speed amplifiers, this amplifier features...
Datasheet
LT1191 on Analog.com
LT6210
Production
The LT6210/LT6211 are single/dual current feedback amplifiers with externally programmable supply current and bandwidth ranging from 10MHz at 300µA per...
Datasheet
LT6210 on Analog.com
LT3468
Production
The LT3468/LT3468-1/LT3468-2 are highly integrated ICs designed to charge photoflash capacitors in digital and film cameras. A patented control technique...
Datasheet
LT3468 on Analog.com
LTC3312S
Recommended for New Designs
The LTC3312SA features dual monolithic synchronous 6A step-down converters in a 4mm × 3mm package for space saving applications with demanding performance...
Datasheet
LTC3312S on Analog.com
LTC3897
Recommended for New Designs
The LTC3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller.
The boost controller drives two N-channel power MOSFET...
Datasheet
LTC3897 on Analog.com
LT8641
Recommended for New Designs
The LT8641 step-down regulator features Silent Switcher architecture designed to minimize EMI/EMC emissions while delivering high efficiency at frequencies...
Datasheet
LT8641 on Analog.com
LTC2461
Production
The LTC2461/LTC2463 are ultra tiny, 16-Bit analog to digital converters with an integrated precision reference. They use a single 2.7V to 5.5V supply and...
Datasheet
LTC2461 on Analog.com
LT3472
Production
The LT3472 dual channel switching regulator generates positive and negative outputs for biasing CCD imagers. The device delivers up to –8V at 50mA and...
Datasheet
LT3472 on Analog.com
LT5500
Last Time Buy
The LT5500 is a receiver front end IC designed for low voltage operation. The chip contains a low noise amplifier (LNA), a Mixer and an LO buffer. The...
Datasheet
LT5500 on Analog.com
LT1723
Production
The LT1722/LT1723/LT1724 are single/dual/quad, low noise, low power, high speed operational amplifiers. These products feature lower input offset voltage...
Datasheet
LT1723 on Analog.com
LTC2268-14
Production
The LTC2268-14/LTC2267-14/LTC2266-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2268-14 on Analog.com
LTC2310-16
Production
The LTC2310-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode range...
Datasheet
LTC2310-16 on Analog.com
LT1306
Production
The LT1306 is a fully integrated, fixed frequency synchronous boost converter capable of generating 5V at 1A from a Li-Ion cell. The device contains both...
Datasheet
LT1306 on Analog.com
LT8609
Recommended for New Designs
The LT8609/LT8609A/LT8609B is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of...
Datasheet
LT8609 on Analog.com
LTC2997
Production
The LTC2997 is a high-accuracy analog output temperature sensor. It converts the temperature of an external sensor or its own temperature to an analog...
Datasheet
LTC2997 on Analog.com
LTC3727LX-1
Production
The LTC3727LX-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3727LX-1 on Analog.com
LTC1417
Production
The LTC1417 is a low power, 400ksps, 14-bit A/D converter. This versatile device can operate from a single 5V or ±5V supplies. An on-board high performance...
Datasheet
LTC1417 on Analog.com
LT1995
Production
The LT1995 is a high speed, high slew rate, gain selectable amplifier with excellent DC performance. Gains from -7 to 8 with a gain accuracy of 0.2% can...
Datasheet
LT1995 on Analog.com
LTC5800-WHM
Production
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTC5800-WHM is the WirelessHART...
Datasheet
LTC5800-WHM on Analog.com
LT1610
Production
The LT1610 is a micropower fixed frequency DC/DC converter that operates from an input voltage as low as 1V. Intended for small, low power applications...
Datasheet
LT1610 on Analog.com
LT3072
Recommended for New Designs
The LT3072 is a low voltage, UltraFastâ„¢ transient response, dual channel linear regulator. The device supplies up to 2.5A per channel with a typical...
Datasheet
LT3072 on Analog.com
LTC4062
Production
The LTC4062 is a full-featured, flexible, standalone linear charger for single-cell Lithium-Ion batteries. It is capable of operating within USB power...
Datasheet
LTC4062 on Analog.com
LTC6255
Last Time Buy
The LTC6255/LTC6256/LTC6257 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6255 on Analog.com
LT3686
Production
The LT3686 is a current mode PWM step-down DC/DC converter with an internal 1.2A power switch, packaged in 10-lead 3mm × 3mm DFN. The wide input range...
Datasheet
LT3686 on Analog.com
LT3693
Production
The LT3693 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 95mO...
Datasheet
LT3693 on Analog.com
LTC4242
Recommended for New Designs
The LTC4242 Hot Swap™ controller allows safe board insertion and removal for two independent slots on a PCI Express backplane. External N-channel transistors...
Datasheet
LTC4242 on Analog.com
LTC2306
Production
The LTC2302/LTC2306 are low noise, 500ksps, 1-/2-channel, 12-bit ADCs with an SPI/MICROWIRE compatible serial interface. These ADCs include a fully differential...
Datasheet
LTC2306 on Analog.com
LT1680
Production
The LT1680 is a high power, current mode switching power supply controller optimized for boost topologies. The IC drives an N-channel MOSFET switch for...
Datasheet
LT1680 on Analog.com
LTC4362
Recommended for New Designs
The LTC4362 monolithic overvoltage/overcurrent protector safeguards 2.5V to 5.5V systems from power supply overvoltage. It is designed for portable devices...
Datasheet
LTC4362 on Analog.com
LT3011
Recommended for New Designs
The LT3011 is a high voltage, micropower, low dropout linear regulator. The device is capable of supplying 50mA of output current with a dropout voltage...
Datasheet
LT3011 on Analog.com
LT5519
Production
The LT5519 mixer is designed to meet the high linearity requirements of wireless and cable infrastructure transmission systems. A high speed, internally...
Datasheet
LT5519 on Analog.com
LTC2297
Production
The LTC2298/LTC2297/LTC2296 are 14-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2297 on Analog.com
LT5568-2
Production
The LT5568-2 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5568-2 on Analog.com
LT6350
Recommended for New Designs
The LT6350 is a rail-to-rail input and output low noise single-ended to differential converter/ADC driver featuring fast settling time. It converts a high...
Datasheet
LT6350 on Analog.com
LT3582
Production
The LT3582/LT3582-5/LT3582-12 are dual DC/DC converters featuring positive and negative outputs and integrated feedback resistors. The LT3582, with its...
Datasheet
LT3582 on Analog.com
LTC1709-9
Production
The LTC1709-8/LTC1709-9 are 2-phase, VID programmable, synchronous step-down switching regulator controllers that drive two all N-channel external power...
Datasheet
LTC1709-9 on Analog.com
LTC4281
Recommended for New Designs
The LTC4281 Hot Swap controller allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, board...
Datasheet
LTC4281 on Analog.com
LTC2879X
Production
The LTC2879X is a rugged RS485/RS422 transceiver
designed to operate over a wide temperature range of
–55°C to 175°C. Special processing steps are...
Datasheet
LTC2879X on Analog.com
LTM9012
Not Recommended for New Designs
The LTM9012 is a 4-channel, simultaneous sampling 14-bit µModule® analog-to-digital converter (ADC) with integrated, fixed gain, differential ADC drivers...
Datasheet
LTM9012 on Analog.com
LTC1412
Production
The LTC1412 is a 12-bit, 3Msps, sampling A/D converter. This high performance device includes a high dynamic range sample-and-hold and a precision reference...
Datasheet
LTC1412 on Analog.com
LTC2326-18
Production
The LTC2326-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2326-18 on Analog.com
LTC2320-16
Production
The LTC2320-16 is a low noise, high speed octal 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2320-16 on Analog.com
LTC4075
Production
The LTC4075/LTC4075X are standalone linear chargers that are capable of charging a single-cell Li-Ion battery from both wall adapter and USB inputs. The...
Datasheet
LTC4075 on Analog.com
LT1280A
Production
The LT1280A/LT1281A are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits...
Datasheet
LT1280A on Analog.com
LTC3026-1
Production
The LTC3026-1 is a very low dropout (VLDO™) linear regulator that can operate at input voltages down to 1.14V. The device is capable of supplying 1.5A...
Datasheet
LTC3026-1 on Analog.com
LT318A
Production
The LT118A is an improved version of the industry standard LM118. The LT118A features lower input offset voltage, lower input offset currents, higher gain...
Datasheet
LT318A on Analog.com
LTC4097
Production
The LTC4097 is a standalone linear battery charger that is capable of charging a single-cell Li-Ion or Li-Polymer battery from both wall adapter and USB...
Datasheet
LTC4097 on Analog.com
LTC4274A_C
Recommended for New Designs
The LTC4274A is a single Power Sourcing Equipment (PSE) controller capable of delivering up to 90W of LTPoE++ power to a compatible LTPoE++ Powered Device...
Datasheet
LTC4274A_C on Analog.com
LT1271
Production
The LT1271 and LT1269 are monolithic high power switching regulators. Identical to the popular LT1070, except for switching frequency (LT1271 = 60kHz,...
Datasheet
LT1271 on Analog.com
LTC1856
Production
The LTC1854/LTC1855/LTC1856 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These ADCs operate from a single 5V...
Datasheet
LTC1856 on Analog.com
LTC4440-5
Production
The LTC4440-5 is a high frequency high side N-channel MOSFET gate driver that is designed to operate in applications with VIN voltages up to 60V. The LTC4440...
Datasheet
LTC4440-5 on Analog.com
LTC2298
Production
The LTC2298/LTC2297/LTC2296 are 14-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2298 on Analog.com
LTC2500-32
Production
The LTC2500-32 is a low noise, low power, high performance 32-bit ADC with an integrated configurable digital filter. Operating from a single 2.5V supply...
Datasheet
LTC2500-32 on Analog.com
LT6274
Obsolete
The LT6274/LT6275 are single/dual low power, high speed, very high slew rate operational amplifiers with outstanding AC and DC performance. The circuit...
Datasheet
LT6274 on Analog.com
LTC3537
Recommended for New Designs
The LTC3537 combines a high efficiency, 2.2MHz step-up DC/DC converter with an independent 100mA low dropout regulator (LDO). The step-up converter starts...
Datasheet
LTC3537 on Analog.com
LTC3256
Recommended for New Designs
The LTC3256 is a wide input range switched capacitor step-down DC/DC converter that produces two regulated outputs: a 5V output via direct connection to...
Datasheet
LTC3256 on Analog.com
LTC5585
Production
The LTC5585 is a direct conversion quadrature demodulator optimized for high linearity receiver applications in the 400MHz to 4GHz frequency range. It...
Datasheet
LTC5585 on Analog.com
LTM4601A
Production
The LTM4601A is a complete 12A step-down switch mode DC/DC power supply with onboard switching controller, MOSFETs, inductor and all support components...
Datasheet
LTM4601A on Analog.com
LT1127
Last Time Buy
The LT1126 dual and LT1127 quad are high performance, decompensated op amps that offer higher slew rate and bandwidth than the LT1124 dual and the LT1125...
Datasheet
LT1127 on Analog.com
LTC4056-4.2
Production
The LTC4056 is a low cost, single-cell, constant-current/ constant-voltage Li-Ion battery charger controller with a programmable termination timer. When...
Datasheet
LTC4056-4.2 on Analog.com
LT1585A-1.5
Production
The LT1585-1.5/LT1585A-1.5 are low dropout, 3-terminal regulators with 4.6A and 5A output current capability respectively, and a fixed 1.5V output voltage...
Datasheet
LT1585A-1.5 on Analog.com
LTC2755
Production
The LTC2755 is a family of quad 12-, 14-, and 16-bit multiplying parallel-input, current-output DACs. These DACs operate from a single 2.7V to 5.5V supply...
Datasheet
LTC2755 on Analog.com
LT1057
Production
The LT®1057 is a matched JFET input dual op amp in the industry standard 8-pin configuration, featuring a combination of outstanding high speed and precision...
Datasheet
LT1057 on Analog.com
LTC1064-3
Production
The LTC1064-3 is a monolithic 8th order lowpass Bessel filter, which provides a linear phase response over its entire passband. An external TTL or CMOS...
Datasheet
LTC1064-3 on Analog.com
LT4294
Recommended for New Designs
The LT4294 is an IEEE 802.3af/at/bt-compliant powered device (PD) interface controller. The T2P output indicates the number of classification events received...
Datasheet
LT4294 on Analog.com
LTM9003
Not Recommended for New Designs
The LTM9003 is a 12-bit digital pre-distortion µModule® receiver subsystem for the transmit path of cellular base-stations. Utilizing an integrated system...
Datasheet
LTM9003 on Analog.com
LTC3899
Recommended for New Designs
The LTC3899 is a high performance triple output (buck/ buck/boost) DC/DC switching regulator controller that drives all N-channel synchronous power MOSFET...
Datasheet
LTC3899 on Analog.com
LTC3406B-1.2
Production
The LTC3406B-1.2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current with...
Datasheet
LTC3406B-1.2 on Analog.com
LTC2356-12
Production
The LTC2356-12/LTC2356-14 are 12-bit/14-bit, 3.5Msps serial ADCs with differential inputs. The devices draw only 5.5mA from a single 3.3V supply and come...
Datasheet
LTC2356-12 on Analog.com
LT1467L
Production
The LT1466L/LT1467L are dual/quad bipolar op amps that combine rail-to-rail input and output operation with precision specifications. Using a patented...
Datasheet
LT1467L on Analog.com
LTC3550
Production
The LTC3550 is a standalone linear charger with a 600mA monolithic synchronous buck converter. It is capable of charging a single-cell Li-Ion battery from...
Datasheet
LTC3550 on Analog.com
LTC2207-14
Production
The LTC2207-14/LTC2206-14 are 105Msps/80Msps, sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals up to input...
Datasheet
LTC2207-14 on Analog.com
LT3781
Production
The LT3781 controller simplifies the design of high power synchronous dual transistor forward DC/DC converters. The part employs fixed frequency current...
Datasheet
LT3781 on Analog.com
LTC2173-12
Production
The LTC2175-12/LTC2174-12/LTC2173-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2173-12 on Analog.com
LT1578
Production
The LT1578 is a 200kHz monolithic buck mode switching regulator. A 1.5A switch is included on the die along with all the necessary oscillator, control...
Datasheet
LT1578 on Analog.com
LTC3426
Recommended for New Designs
The LTC3426 step-up switching regulator generates an output voltage of up to 5.5V from an input voltage as low as 1.6V. Ideal for applications where space...
Datasheet
LTC3426 on Analog.com
LTC3604
Production
The LTC3604 is a high efficiency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of...
Datasheet
LTC3604 on Analog.com
LTM2220-AA
Obsolete
OBSOLETE PRODUCT Data Sheet For Reference Only
The LTM2220-AA is a 170Msps sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic...
Datasheet
LTM2220-AA on Analog.com
LTC3783
Production
The LTC3783 is a current mode LED driver and boost, flyback and SEPIC controller that drives both an N-channel power MOSFET and an N-channel load PWM switch...
Datasheet
LTC3783 on Analog.com
LTC5535
Production
The LTC5535 is an RF power detector for RF applications operating in the 600MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5535 on Analog.com
LT6202
Production
The LT6202/LT6203/LT6204 are single/dual/quad low noise, rail-to-rail input and output unity gain stable op amps that feature 1.9nV/vHz noise voltage and...
Datasheet
LT6202 on Analog.com
LTC1754
Production
The LTC1754 is a micropower charge pump DC/DC converter that produces a regulated output. The input voltage range is 2V to 4.4V for 3.3V output and 2.7V...
Datasheet
LTC1754 on Analog.com
LT1311
Obsolete
OBSOLETE PRODUCT Data Sheet For Reference Only
The LT1311 is a quad current-to-voltage converter designed for the demanding requirements of photo diode...
Datasheet
LT1311 on Analog.com
LTC4020
Recommended for New Designs
The LTC4020 is a high voltage power manager providing PowerPath™ instant-on operation and high efficiency battery charging over a wide voltage range. An...
Datasheet
LTC4020 on Analog.com
LT1210
Production
The LT1210 is a current feedback amplifier with high output current and excellent large-signal characteristics. The combination of high slew rate, 1.1A...
Datasheet
LT1210 on Analog.com
LTC6240
Recommended for New Designs
The LTC6240/6241/LTC6242 are single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input...
Datasheet
LTC6240 on Analog.com
LTC4412
Recommended for New Designs
The LTC4412 controls an external P-channel MOSFET to create a near ideal diode function for power switchover or load sharing. This permits highly efficient...
Datasheet
LTC4412 on Analog.com
LTC2924
Recommended for New Designs
The LTC2924 is a power supply sequencer designed for use with external N-channel MOSFETs or power supplies with shutdown pins. Four power supplies can...
Datasheet
LTC2924 on Analog.com
LTM4605
Recommended for New Designs
The LTM4605 is a high efficiency switching mode buckboost power supply. Included in the package are the switching controller, power FETs, and support components...
Datasheet
LTM4605 on Analog.com
LT8652S
Recommended for New Designs
The LT8652S is a dual step-down regulator that delivers up to 8.5A of continuous current from both channels and supports loads up to 12A from each channel...
Datasheet
LT8652S on Analog.com
LT8640
Recommended for New Designs
The LT8640/LT8640-1 step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency at frequencies...
Datasheet
LT8640 on Analog.com
LTC2865
Production
The LTC2862/LTC2863/LTC2864/LTC2865 are low power, 20Mbps or 250kbps RS485/RS422 transceivers operating on 3V to 5.5V supplies that feature ±60V overvoltage...
Datasheet
LTC2865 on Analog.com
LT3846
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1846 family of control ICs contains all necessary circuitry...
Datasheet
LT3846 on Analog.com
LT6109
Recommended for New Designs
The LT6109 is a complete high side current sense device that incorporates a precision current sense amplifier, an integrated voltage reference and two...
Datasheet
LT6109 on Analog.com
LTC1444
Production
The LTC1443/LTC1444/LTC1445 are ultralow power quad comparators with a built-in reference. The comparators feature less than 8.5µA supply current over...
Datasheet
LTC1444 on Analog.com
LT1222
Production
The LT1222 is a low noise, very high speed operational amplifier with superior DC performance. The LT1222 is stable in a noise gain of 10 or greater without...
Datasheet
LT1222 on Analog.com
LTC7860
Recommended for New Designs
The LTC7860 high efficiency surge stopper protects loads from high voltage transients. High efficiency permits higher currents and smaller solution sizes...
Datasheet
LTC7860 on Analog.com
LTC2495
Production
The LTC2495 is a 16-channel (eight differential), 16-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling...
Datasheet
LTC2495 on Analog.com
LTC3456
Production
The LTC3456 is a complete power management system IC optimized for a variety of portable applications. The device generates two separate power rails: a...
Datasheet
LTC3456 on Analog.com
LT1027LS8
Production
The LT1027LS8 is a precision reference that combines low drift and noise with excellent long-term stability and high output accuracy. The reference output...
Datasheet
LT1027LS8 on Analog.com
LTC2260-14
Production
The LTC2261-14/LTC2260-14/LTC2259-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2260-14 on Analog.com
LTC3722
Production
The LTC3722-1/LTC3722-2 phase-shift PWM controllers provide all of the control and protection functions necessary to implement a high efficiency, zero...
Datasheet
LTC3722 on Analog.com
LTC4269-2
Not Recommended for New Designs
The LTC4269-2 is an integrated Powered Device (PD) interface and power supply controller featuring 2-event classification signaling, flexible auxiliary...
Datasheet
LTC4269-2 on Analog.com
LT1363
Production
The LT1363 is a high speed, very high slew rate operational amplifier with excellent DC performance. The LT1363 features reduced supply current, lower...
Datasheet
LT1363 on Analog.com
LT3975
Production
The LT3975 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 42V. Low quiescent current design...
Datasheet
LT3975 on Analog.com
LTC2605
Production
The LTC2605/LTC2615/LTC2625 are octal 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP packages. They have built...
Datasheet
LTC2605 on Analog.com
LTC1983
Production
The LTC1983-3 and LTC1983-5 are inverting charge pump DC/DC converters that produce negative regulated outputs. The parts require only three tiny external...
Datasheet
LTC1983 on Analog.com
LTC2192
Production
The LTC2192/LTC2191/LTC2190 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2192 on Analog.com
LTC3649
Recommended for New Designs
The LTC3649 is a high efficiency 60V, 4A synchronous monolithic step-down regulator. The regulator features a single resistor programmable output voltage...
Datasheet
LTC3649 on Analog.com
LTC3730
Production
The LTC3730 is a PolyPhase® synchronous step-down switching regulator controller that drives all N-channel external power MOSFET stages in a phase-lockable...
Datasheet
LTC3730 on Analog.com
LTC2862
Production
The LTC2862/LTC2863/LTC2864/LTC2865 are low power, 20Mbps or 250kbps RS485/RS422 transceivers operating on 3V to 5.5V supplies that feature ±60V overvoltage...
Datasheet
LTC2862 on Analog.com
LTC3610
Production
The LTC3610 is a high efficiency, monolithic synchronous step-down DC/DC converter that can deliver up to 12A output current from a 4V to 24V (28V maximum...
Datasheet
LTC3610 on Analog.com
LTM4631
Recommended for New Designs
The LTM4631 is a dual 10A or single 20A output switching mode step-down DC/DC µModule® (power module) regulator. Included in the package are the switching...
Datasheet
LTM4631 on Analog.com
LTC2345-16
Production
The LTC2345-16 is a 16-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range...
Datasheet
LTC2345-16 on Analog.com
LTC2905
Production
The LTC2904/LTC2905 are dual supply monitors intended for systems with two supply voltages. The dual supply monitors have a common reset output with delay...
Datasheet
LTC2905 on Analog.com
LTC1654
Production
The LTC1654 is a dual, rail-to-rail voltage output, 14-bit digital-to-analog converter (DAC). It is available in a 16-lead narrow SSOP package, making...
Datasheet
LTC1654 on Analog.com
LTC4312
Production
The LTC4312 is a hot-swappable 2-channel 2-wire bus multiplexer that allows one upstream bus to connect to any combination of downstream busses or channels...
Datasheet
LTC4312 on Analog.com
LTM8022
Production
The LTM8022 is a complete 1A, DC/DC µModule (power module) step-down regulator. Included in the package are the switching controller, power switches, inductor...
Datasheet
LTM8022 on Analog.com
LTM4636
Recommended for New Designs
The LTM4636 is a 40A step-down μModule (power module) switching regulator with a stacked inductor as a heat sink for quicker heat dissipation and cooler...
Datasheet
LTM4636 on Analog.com
LTC1407-1
Production
The LTC1407-1/LTC1407A-1 are 12-bit/14-bit, 3Msps ADCs with two 1.5Msps simultaneously sampled differential inputs. The devices draw only 4.7mA from a...
Datasheet
LTC1407-1 on Analog.com
LT3748
Production
The LT3748 is a switching regulator controller specifically designed for the isolated flyback topology and capable of high power. It drives a low side...
Datasheet
LT3748 on Analog.com
LTC1855
Production
The LTC1854/LTC1855/LTC1856 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These ADCs operate from a single 5V...
Datasheet
LTC1855 on Analog.com
LT3570
Production
The LT3570 is a buck and boost converter with internal power switches and LDO controller. Each converter is designed with a 1.5A current limit and an input...
Datasheet
LT3570 on Analog.com
LTC2462
Production
The LTC2460/LTC2462 are ultra tiny, 16-Bit analog-to-digital converters with an integrated precision reference. They use a single 2.7V to 5.5V supply and...
Datasheet
LTC2462 on Analog.com
LTC4098
Recommended for New Designs
The LTC4098/LTC4098-1 are high efficiency USB Power-Path controllers and full-featured Li-Ion/Polymer battery chargers. They seamlessly manage power distribution...
Datasheet
LTC4098 on Analog.com
LTC2140-12
Production
The LTC2142-12/LTC2141-12/LTC2140-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2140-12 on Analog.com
LTC2414
Production
The LTC2414/LTC2418 are 8-/16-channel (4-/8-differential) micropower 24-bit ?S analog-to-digital converters. They operate from 2.7V to 5.5V and include...
Datasheet
LTC2414 on Analog.com
LT1996
Production
The LT1996 combines a precision operational amplifier with eight precision resistors to form a one-chip solution for accurately amplifying voltages. Gains...
Datasheet
LT1996 on Analog.com
LTC2949
Production
The LTC2949 is a high precision current, voltage, temperature, charge and energy meter for electrical and hybrid vehicles and other isolated current sense...
Datasheet
LTC2949 on Analog.com
LT3791
Production
The LT3791 is a synchronous 4-switch buck-boost LED driver controller. The controller can regulate LED current up to 52V of LED string with input voltages...
Datasheet
LT3791 on Analog.com
LT6402-20
Production
The LT6402-20 is a low distortion, low noise differential ampli?er/ADC driver for use in applications from DC to 300MHz. The LT6402-20 has been designed...
Datasheet
LT6402-20 on Analog.com
LTC2155-12
Production
The LTC2157-12/LTC2156-12/LTC2155-12 are a family of dual 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2155-12 on Analog.com
LTM4653
Recommended for New Designs
The LTM4653 is an ultralow noise 58V, 4A DC/DC stepdown µModule® regulator designed to meet the radiated emissions requirements of EN55022. Conducted emission...
Datasheet
LTM4653 on Analog.com
LT1189
Production
The LT1189 is a difference amplifier optimized for operation on ±5V, or a single 5V supply, and gain ≥10. This versatile amplifier features uncommitted...
Datasheet
LT1189 on Analog.com
LTC1746
Production
The LTC1746 is a 25Msps, sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1746 on Analog.com
LTC2435
Production
The LTC2435/2435-1 are 2.7V to 5.5V micropower 20-bit differential ?? analog to digital converters with integrated oscillator, 3ppm INL and 0.8ppm RMS...
Datasheet
LTC2435 on Analog.com
LTC2941-1
Obsolete
The LTC2941-1 measures battery charge state in battery-powered handheld PC and portable product applications. Its operating range is perfectly suited for...
Datasheet
LTC2941-1 on Analog.com
LTC1400
Production
The LTC1400 is a complete 400ksps, 12-bit A/D converter which draws only 75mW from a 5V or ±5V supplies. This easy-to-use device comes complete with a...
Datasheet
LTC1400 on Analog.com
LT3958
Production
The LT3958 is a wide input range, current mode, DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured...
Datasheet
LT3958 on Analog.com
LTC2971
Recommended for New Designs
The LTC2971, LTC2971-1, LTC2971-2, and LTC2971-3 are 2-channel high voltage Power System Managers used to sequence, trim (servo), margin, supervise, manage...
Datasheet
LTC2971 on Analog.com
LTC2223
Production
The LTC2222 and LTC2223 are 105Msps/80Msps, sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2222...
Datasheet
LTC2223 on Analog.com
LTP5902-WHM
Production
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTP5902-WHM is the SmartMesh...
Datasheet
LTP5902-WHM on Analog.com
LT8309
Production
The LT8309 is a secondary-side synchronous rectifier driver that replaces the output rectifier diode in a flyback topology. By replacing the diode with...
Datasheet
LT8309 on Analog.com
LTC7130
Recommended for New Designs
The LTC7130 is a current mode synchronous step-down monolithic converter that can deliver up to 20A continuous load current. It employs a unique architecture...
Datasheet
LTC7130 on Analog.com
LTM4700
Recommended for New Designs
The LTM4700 is a dual 50A or single 100A step-down µModule® (power module) DC/DC regulator featuring remote configurability and telemetry-monitoring...
Datasheet
LTM4700 on Analog.com
LTM4673
Recommended for New Designs
The LTM4673 is a quad output, dual 12A and dual 5A, switching mode DC/DC step-down μModule (powermodule) regulator integrated with 4-channel Power System...
Datasheet
LTM4673 on Analog.com
LTC2165
Production
The LTC2165/LTC2164/LTC2163 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2165 on Analog.com
LTC1518
Production
The LTC1518/LTC1519 are high speed, precision delay differential quad bus/line receivers that can operate at data rates as high as 52Mbps. They are pin...
Datasheet
LTC1518 on Analog.com
LTM8053
Recommended for New Designs
The LTM8053 is a 40VIN, 3.5A continuous, 6A peak step-down µModule® (power module) regulator. Included in the package are the switching controller, power...
Datasheet
LTM8053 on Analog.com
LTC1709-7
Production
The LTC1709-7 is a 2-phase, VID programmable, synchronous step-down switching regulator controller that drives two all N-channel external power MOSFET...
Datasheet
LTC1709-7 on Analog.com
LTM9100
Production
The LTM9100 μModule® (micromodule) controller is a complete, galvanically isolated switch controller with I2C interface, for use as a load switch or...
Datasheet
LTM9100 on Analog.com
LTC6954
Last Time Buy
The LTC6954 is a family of very low phase noise clock distribution parts. Each part has three outputs and each output has an individually programmable...
LTC6954 on Analog.com
LTC2327-18
Production
The LTC2327-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2327-18 on Analog.com
LTC2280
Production
The LTC2280 is a 10-bit 105Msps, low noise 3V dual A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2280 is perfect...
Datasheet
LTC2280 on Analog.com
LTC2906
Production
The LTC2906/LTC2907 are dual supply monitors intended for systems with multiple supply voltages. The dual supply monitors have a common reset output with...
Datasheet
LTC2906 on Analog.com
LTC2932
Production
The LTC2932 is a con?gurable supply monitor for systems with up to six supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2932 on Analog.com
LTC2376-16
Production
The LTC2376-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2376-16 has...
Datasheet
LTC2376-16 on Analog.com
LTC2758
Production
The LTC2758 is a dual 18-bit multiplying serial-input, current-output digital-to-analog converter. LTC2758A provides full 18-bit performance (INL and DNL...
Datasheet
LTC2758 on Analog.com
LTC6601-1
Last Time Buy
The LTC6601-1 is a very easy-to-use fully differential 2nd order active RC filter and driver. On-chip resistors, capacitors, and amplifier bandwidth are...
LTC6601-1 on Analog.com
LTC3625
Recommended for New Designs
The LTC3625/LTC3625-1 are programmable supercapacitor chargers designed to charge two supercapacitors in series to a fixed output voltage (4.8V/5.3V or...
Datasheet
LTC3625 on Analog.com
LT8643S-2
Recommended for New Designs
The LT8640S-2/LT8643S-2 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high...
Datasheet
LT8643S-2 on Analog.com
LTC2496
Production
The LTC2496 is a 16-channel (8-differential) 16-bit No Latency ?S™ ADC with Easy Drive™ technology. The patented sampling scheme eliminates dynamic input...
Datasheet
LTC2496 on Analog.com
LTC2499
Production
The LTC2499 is a 16-channel (eight differential), 24-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling...
Datasheet
LTC2499 on Analog.com
LTC3025
Production
The LTC3025 is a micropower, VLDOâ„¢ (very low dropout) linear regulator which operates from input voltages as low as 0.9V. The device is capable of supplying...
Datasheet
LTC3025 on Analog.com
LTC2804
Production
The LTC2801/LTC2802/LTC2803/LTC2804 are single and dual RS-232 transceivers in narrow SSOP and chip-scale DFN packages. All operate over a supply range...
Datasheet
LTC2804 on Analog.com
LTC1438
Production
The LTC1438/LTC1439 are dual, synchronous stepdown switching regulator controllers which drive external N-channel power MOSFETs in a phase-lockable fixed...
Datasheet
LTC1438 on Analog.com
LT1497
Production
The LT1497 dual current feedback amplifier features low power, high output drive, excellent video characteristics and outstanding distortion performance...
Datasheet
LT1497 on Analog.com
LT3844
Production
The LT3844 is a DC/DC controller used for medium power, low part count, high efficiency supplies. It offers a wide 4V to 60V input range (7.5V minimum...
Datasheet
LT3844 on Analog.com
LTC1536
Production
The LTC1536 is designed for PCI local bus applications with multiple supply voltages that require low power, small size, high speed and high accuracy supply...
Datasheet
LTC1536 on Analog.com
LT6005
Recommended for New Designs
The LT6003/LT6004/LT6005 are single/dual/quad op amps designed to maximize battery life and performance for portable applications. These amplifiers operate...
Datasheet
LT6005 on Analog.com
LT1364
Production
The LT1364/LT1365 are dual and quad high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply...
Datasheet
LT1364 on Analog.com
LT1120
Not Recommended for New Designs
The LT1120 is a combination micropower positive regulator and free collector comparator on a single monolithic chip. With only 40µA supply current, the...
Datasheet
LT1120 on Analog.com
LTC3718
Production
The LTC3718 is a high current, high efficiency synchronous switching regulator controller for DDR and QDR™ memory termination. It operates from an input...
Datasheet
LTC3718 on Analog.com
LTC3830
Production
The LTC3830/LTC3830-1 are high power, high efficiency switching regulator controllers optimized for 3.3V-5V to 1.xV-3.xV step-down applications. A precision...
Datasheet
LTC3830 on Analog.com
LTC2362
Production
The LTC2360/LTC2361/LTC2362 are 100ksps/250ksps/500ksps, 12-bit, sampling A/D converters that draw only 0.5mA, 0.75mA and 1.1mA, respectively, from a single...
Datasheet
LTC2362 on Analog.com
LTC3415
Production
The LTC3415 is a high efficiency, monolithic synchronous buck regulator using a phase lockable constant frequency, current mode architecture. PolyPhase...
Datasheet
LTC3415 on Analog.com
LT3466-1
Production
LT3466-1 is a dual switching regulator that combines a white LED driver and a boost converter in a low profile, small footprint (3mm × 3mm × 0.75mm) DFN...
Datasheet
LT3466-1 on Analog.com
LT1010
Production
The LT1010 is a fast, unity-gain buffer that can increase the output capability of existing IC op amps by more than an order of magnitude. This easy-to...
Datasheet
LT1010 on Analog.com
LT3697
Production
The LT3697 is a 35V, 2.5A step-down switching regulator designed to power 5V USB applications. A precise output voltage and programmable cable drop compensation...
Datasheet
LT3697 on Analog.com
LTC1349
Production
The LTC1349 is a 3-driver/5-receiver RS232 transceiver with very low supply current. In the no load condition, the supply current is only 300µA. The charge...
Datasheet
LTC1349 on Analog.com
LT5511
Last Time Buy
The LT5511 mixer is designed to meet the high linearity requirements of cable TV infrastructure downstream transmitters and wireless infrastructure transmit...
Datasheet
LT5511 on Analog.com
LT1572
Obsolete
The LT1572 is a 1.25A 100kHz monolithic switching regulator with on-board switch and catch diode included in one package. It combines an LT1172 with a...
Datasheet
LT1572 on Analog.com
LTC7060
Recommended for New Designs
The LTC7060 drives two N-Channel MOSFETs in a half-bridge configuration with supply voltages up to 100V. Both high-side and low-side drivers can drive...
Datasheet
LTC7060 on Analog.com
LT1791
Production
The LT1785/LT1791 are half-duplex and full-duplex differential bus transceivers for RS485 and RS422 applications which feature on-chip protection from...
Datasheet
LT1791 on Analog.com
LT1001
Production
The LT1001 significantly advances the state-of-the-art of precision operational amplifiers. In the design, processing, and testing of the device, particular...
Datasheet
LT1001 on Analog.com
LT1571
Production
The LT1571 PWM battery charger is a simple, efficient solution to fast-charge rechargeable batteries including lithium-ion (Li-Ion), nickel-metal-hydride...
Datasheet
LT1571 on Analog.com
LT1302
Production
The LT1302/LT1302-5 are micropower step-up DC/DC converters that maintain high efficiency over a wide range of output current. They operate from a supply...
Datasheet
LT1302 on Analog.com
LTC1323
Not Recommended for New Designs
The LTC1323 is a multi-protocol line transceiver designed to operate on AppleTalk or EIA562-compatible single-ended networks while operating from a single...
Datasheet
LTC1323 on Analog.com
LT8391D
Recommended for New Designs
The LT8391D is a synchronous 4-switch buck-boost LED controller that regulates LED current from an input voltage above, below, or equal to the output voltage...
Datasheet
LT8391D on Analog.com
LTC3586
Production
The LTC3586/LTC3586-1 are highly integrated power management and battery charger ICs for Li-Ion/Polymer battery applications. They include a high efficiency...
Datasheet
LTC3586 on Analog.com
LTC2175-12
Production
The LTC2175-12/LTC2174-12/LTC2173-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2175-12 on Analog.com
LTC4121
Recommended for New Designs
The LTC4121 is a 400mA constant-current/constantvoltage (CC/CV) synchronous step-down battery charger. In addition to CC/CV operation, the LTC4121 regulates...
Datasheet
LTC4121 on Analog.com
LTC1480
Production
The LTC1480 is an ultralow power differential line transceiver which provides full RS485 compatibility while operating from a single 3.3V supply. It is...
Datasheet
LTC1480 on Analog.com
LTC5599
Production
The LTC5599 is a direct conversion I/Q modulator designed for low power wireless applications that enable direct modulation of differential baseband I...
Datasheet
LTC5599 on Analog.com
LTC4100
Production
The LTC4100 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS compliant system. The LTC4100...
Datasheet
LTC4100 on Analog.com
LT6556
Production
The LT6556 is a high speed triple 2:1 video multiplexer with an internally fixed gain of 1. The individual buffers are optimized for performance with a...
Datasheet
LT6556 on Analog.com
LT8349
Recommended for New Designs
The LT8349 is a 2-phase single output synchronous
boost converter that drives two internal N-Channel
power MOSFET stages out-of-phase. Multiphase
operation...
Datasheet
LT8349 on Analog.com
LTM4603HV
Production
The LTM4603HV is a complete 6A step-down switch mode DC/DC power supply with onboard switching controller, MOSFETs, inductor and all support components...
Datasheet
LTM4603HV on Analog.com
LTC1157
Production
The LTC1157 dual 3.3V micropower MOSFET gate driver makes it possible to switch either supply or ground reference loads through a low RDS(ON) Nchannel...
Datasheet
LTC1157 on Analog.com
LTM8005
Obsolete
The LTM8005 is a 38VIN, 38VOUT boost µModule (power
micromodule) LED driver designed to regulate current or
voltage and is ideal for driving LEDs. The...
Datasheet
LTM8005 on Analog.com
LT1575
Not Recommended for New Designs
The LT1575/LT1577 are single/dual controller ICs that drive low cost external N-channel MOSFETs as source followers to produce ultrafast transient response...
Datasheet
LT1575 on Analog.com
LTC4259A-1
Not Recommended for New Designs
The LTC4259A-1 is a quad –48V Hot Swap™ controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment (PSE). It consists of four independent...
Datasheet
LTC4259A-1 on Analog.com
LTC3350
Recommended for New Designs
The LTC3350 is a backup power controller that can charge and monitor a series stack of one to four supercapacitors. The LTC3350’s synchronous step-down...
Datasheet
LTC3350 on Analog.com
LTC6400-20
Last Time Buy
The LTC6400-20 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive...
LTC6400-20 on Analog.com
LTC4233
Recommended for New Designs
The LTC4233 is an integrated solution for Hot Swap™ applications that allows a board to be safely inserted and removed from a live backplane. The part...
Datasheet
LTC4233 on Analog.com
LT3650-8.2
Production
The LT3650 is a complete monolithic 2-cell Li-Ion/Polymer battery charger that operates over a 9V to 32V input voltage range (11.5V minimum start-up voltage...
Datasheet
LT3650-8.2 on Analog.com
LTC5587
Production
The LTC5587 is a 10MHz to 6GHz, low power monolithic precision RMS power detector with an integrated 12-bit serial analog-to-digital converter (ADC). The...
Datasheet
LTC5587 on Analog.com
LTC7051
Recommended for New Designs
The LTC7051 monolithic power stage fully integrates high speed drivers with low resistance half-bridge power switches plus comprehensive monitoring and...
Datasheet
LTC7051 on Analog.com
LTC1690
Production
The LTC1690 is a low power receiver/driver pair that is compatible with the requirements of RS485 and RS422. The receiver offers a fail-safe feature that...
Datasheet
LTC1690 on Analog.com
LT1976
Production
The LT1976/LT1976B are 200kHz monolithic step-down switching regulators that accept input voltages up to 60V. A high efficiency 1.5A, 0.2? switch is included...
Datasheet
LT1976 on Analog.com
LT3750A
Recommended for New Designs
The LT3750A is a flyback converter designed to rapidly charge large capacitors to a user-adjustable target volt-age. A patented boundary mode control scheme...
Datasheet
LT3750A on Analog.com
LT3995
Production
The LT3995 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 60V. Low quiescent current design...
Datasheet
LT3995 on Analog.com
LTC1732-8.4
Production
The LTC1732-8.4 is a complete constant-current/constant-voltage linear charge controller for lithium-ion (Li-Ion) batteries. Nickel-cadmium (NiCd) and...
Datasheet
LTC1732-8.4 on Analog.com
LT3120
Recommended for New Designs
The LT3120 is a high efficiency 26V monolithic buck-boost converter. Extensive feature integration and very low resistance internal power switches minimize...
Datasheet
LT3120 on Analog.com
LTC6946
Last Time Buy
The LTC6946 is a high performance, low noise, 6.39GHz phase-locked loop (PLL) with a fully integrated VCO, including a reference divider, phase-frequency...
Datasheet
LTC6946 on Analog.com
LTC6994-1
Production
The LTC6994 is a programmable delay block with a range of 1µs to 33.6 seconds. The LTC6994 is part of the TimerBlox® family of versatile silicon timing...
Datasheet
LTC6994-1 on Analog.com
LTC1687
Production
The LTC1686/LTC1687 are high speed, precision delay, full-duplex RS485 transceivers that can operate at data rates as high as 52Mbps. The devices also...
Datasheet
LTC1687 on Analog.com
LTC1566-1
Production
The LTC1566-1 is a 7th order continuous time lowpass filter with 12dB of passband gain. The selectivity, linearity and dynamic range makes the LTC1566...
Datasheet
LTC1566-1 on Analog.com
LTC2253
Production
The LTC2253/LTC2252 are 12-bit 125Msps/105Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2253...
Datasheet
LTC2253 on Analog.com
LTC2937
Recommended for New Designs
The LTC2937 is a 6-channel power supply sequencer and voltage supervisor. Supplies are enabled or disabled with precise user controlled order and time...
Datasheet
LTC2937 on Analog.com
LTC3308B
Recommended for New Designs
The LTC3308B is a very small, high efficiency, low noise, monolithic synchronous 4A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3308B on Analog.com
LTC1544
Production
The LTC1544 is a 4-driver/4-receiver multiprotocol transceiver. The LTC1544 and LTC1543 form the core of a complete software-selectable DTE or DCE interface...
Datasheet
LTC1544 on Analog.com
LTC3330
Recommended for New Designs
The LTC3330 integrates a high voltage energy harvesting power supply plus a DC/DC converter powered by a primary cell battery to create a single output...
Datasheet
LTC3330 on Analog.com
LTC2855
Production
The LTC2854 and LTC2855 are low power, 20Mbps RS485/RS422 transceivers operating on 3.3V supplies. The receiver includes a logic-selectable 120Ω termination...
Datasheet
LTC2855 on Analog.com
LTC3895
Recommended for New Designs
The LTC3895 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage that can operate...
Datasheet
LTC3895 on Analog.com
LTC1645
Production
The LTC1645 is a 2-channel Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Using external N-channel pass...
Datasheet
LTC1645 on Analog.com
LTM8080
Recommended for New Designs
The LTM8080 is a 40VIN, dual 500mA or single 1A ultralow noise, ultrahigh PSRR μModule® regulator. LTM8080 has cascaded architecture which contains a...
LTM8080 on Analog.com
LT8315
Production
The LT8315 is a high voltage flyback converter with integrated 630V/300mA switch. No opto-isolator is needed for regulation. The device samples the output...
Datasheet
LT8315 on Analog.com
LTC5569
Production
The LTC5569 dual active downconverting mixer is optimized for diversity and MIMO receiver applications that require low power and small size. Each mixer...
Datasheet
LTC5569 on Analog.com
LT1785
Production
The LT1785/LT1791 are half-duplex and full-duplex differential bus transceivers for RS485 and RS422 applications which feature on-chip protection from...
Datasheet
LT1785 on Analog.com
LTC1267
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1267 series are dual synchronous step-down switching...
Datasheet
LTC1267 on Analog.com
LT3013B
Recommended for New Designs
The LT3013B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage...
Datasheet
LT3013B on Analog.com
LTM4600
Production
The LTM4600 is a complete 10A, DC/DC step down power supply. Included in the package are the switching controller, power FETs, inductor, and all support...
Datasheet
LTM4600 on Analog.com
LTC1644
Production
The LTC1644 is a Hot Swap™ controller that allows a board to be safely inserted and removed from a CompactPCI bus slot. External N-channel transistors...
Datasheet
LTC1644 on Analog.com
LTC1667
Production
The LTC1666/LTC1667/LTC1668 are 12-/14-/16-bit, 50Msps differential current output DACs implemented on a high performance BiCMOS process with laser trimmed...
Datasheet
LTC1667 on Analog.com
LT1948
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1948 is a highly integrated multiple output DC/DC converter...
Datasheet
LT1948 on Analog.com
LTC2910
Recommended for New Designs
The LTC2910 is an octal input voltage monitor intended for monitoring multiple voltages in a variety of applications. Each input has a nominal 0.5V threshold...
Datasheet
LTC2910 on Analog.com
LT3745-1
Production
The LT3745-1 integrates a 16-channel LED driver with a 55V buck controller. The LED driver lights up to 75mA/36V of LEDs in series per channel, and the...
Datasheet
LT3745-1 on Analog.com
LTC5530
Production
The LTC5530 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5530 on Analog.com
LT8471
Recommended for New Designs
The LT8471 is a dual PWM DC/DC converter containing two internal 2A, 50V switches and an additional 500mA switch to facilitate step-down and inverting...
Datasheet
LT8471 on Analog.com
LTC2645
Production
The LTC2645 is a family of quad 12-, 10-, and 8-bit PWM to- voltage output DACs with an integrated high accuracy, low drift, 10ppm/°C reference in a 16...
Datasheet
LTC2645 on Analog.com
LTC4228
Recommended for New Designs
The LTC4228 offers ideal diode and Hot Swap™ functions for two power rails by controlling two external N-channel MOSFETs in each rail. MOSFETs acting as...
Datasheet
LTC4228 on Analog.com
LT1944
Production
The LT1944 is a dual micropower step-up DC/DC converter in a 10-pin MSOP package. Each converter is designed with a 350mA current limit and an input voltage...
Datasheet
LT1944 on Analog.com
LTC1546
Production
The LTC1546 is a 3-driver/3-receiver multiprotocol transceiver with on-chip cable termination. When combined with the LTC1544, this chip set forms a complete...
Datasheet
LTC1546 on Analog.com
LTC3410B
Production
The LTC3410B is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available...
Datasheet
LTC3410B on Analog.com
LT3653
Production
The LT3653 is a monolithic current mode PWM step-down regulator with programmable output current limit. Typically, it is used with battery charger power...
Datasheet
LT3653 on Analog.com
LTM4710-1
Recommended for New Designs
The LTM4710-1 is a quad DC/DC step-down μModule (micromodule) regulator with 8A per output. The package includes the switching controllers, the power...
Datasheet
LTM4710-1 on Analog.com
LT3742
Production
The LT3742 is a dual step-down DC/DC switching regulator controller that drives high side N-channel power MOSFETs. A 500kHz ?xed frequency current mode...
Datasheet
LT3742 on Analog.com
LTC3448
Production
The LTC3448 is a high efficiency, monolithic, synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC3448 on Analog.com
LT685
Production
The LT685 is an ultrafast comparator with differential inputs and complementary outputs fully compatible with ECL logic levels. The output current capability...
Datasheet
LT685 on Analog.com
LT6201
Production
The LT6200/LT6201 are single and dual ultralow noise, rail-to-rail input and output unity gain stable op amps that feature 0.95nV/vHz noise voltage. These...
Datasheet
LT6201 on Analog.com
LT8618
Recommended for New Designs
The LT8618 family are compact, high speed synchronous monolithic step-down switching regulators that deliver up to 100mA to the output with high efficiency...
Datasheet
LT8618 on Analog.com
LTC2000
Production
The LTC2000 is a family of 16-/14-/11-bit 2.5Gsps current steering DACs with exceptional spectral purity.
The single (1.25Gsps mode) or dual (2.5Gsps mode...
Datasheet
LTC2000 on Analog.com
LTC3700
Production
The LTC3700 is a constant frequency current mode stepdown (buck) DC/DC controller with excellent AC and DC load and line regulation. The on-chip 150mA...
Datasheet
LTC3700 on Analog.com
LT8410
Production
The LT8410/LT8410-1 are ultralow power boost converters with integrated power switch, Schottky diode and output disconnect circuitry. The parts control...
Datasheet
LT8410 on Analog.com
LTM8058
Production
The LTM8058 is a 2kV AC isolated flyback µModule® (power module) DC/DC converter with LDO post regulator. Included in the package are the switching controller...
Datasheet
LTM8058 on Analog.com
LTC3105
Recommended for New Designs
The LTC3105 is a high efficiency step-up DC/DC converter that can operate from input voltages as low as 225mV. A 250mV start-up capability and integrated...
Datasheet
LTC3105 on Analog.com
LTC1709-8
Production
The LTC1709-8/LTC1709-9 are 2-phase, VID programmable, synchronous step-down switching regulator controllers that drive two all N-channel external power...
Datasheet
LTC1709-8 on Analog.com
LTC3425
Recommended for New Designs
The LTC3425 is a synchronous, 4-phase boost converter with output disconnect capable of operation below 1V input. It includes four N-channel MOSFET switches...
Datasheet
LTC3425 on Analog.com
LTC1685
Production
The LTC1685 is a high speed, precision delay RS485 transceiver that can operate at data rates as high as 52Mbps. The device also meets the requirements...
Datasheet
LTC1685 on Analog.com
LT8500
Recommended for New Designs
The LT8500 is a pulse width modulation (PWM) generator with 48 independent channels. Each channel has an individually adjustable 12-bit (4096-step) PWM...
Datasheet
LT8500 on Analog.com
LTC1276
Production
The LTC1273/LTC1275/LTC1276 are 300ksps, sampling 12-bit A/D converters that draw only 75mW from single 5V or ±5V supplies. These easy-to-use devices come...
Datasheet
LTC1276 on Analog.com
LT3475
Production
The LT3475 is a dual step-down DC/DC converter designed to operate as a constant-current source. An internal sense resistor monitors the output current...
Datasheet
LT3475 on Analog.com
LTC4557
Production
The LTC4557 provides power conversion and signal level translation needed for 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber identity...
Datasheet
LTC4557 on Analog.com
LTC2900
Production
The LTC2900 is a programmable supply monitor for systems with up to four supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2900 on Analog.com
LTC3862
Production
The LTC3862 is a two phase constant frequency, current mode boost and SEPIC controller that drives N-channel power MOSFETs. Two phase operation reduces...
Datasheet
LTC3862 on Analog.com
LTC1343
Production
The LTC1343 is a 4-driver/4-receiver multiprotocol transceiver that operates from a single 5V supply. Two LTC1343s form the core of a complete software...
Datasheet
LTC1343 on Analog.com
LTC3307A
Recommended for New Designs
The LTC®3307A is a very small, high efficiency, low noise, monolithic synchronous 3A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3307A on Analog.com
LT6200
Production
The LT6200/LT6201 are single and dual ultralow noise, rail-to-rail input and output unity gain stable op amps that feature 0.95nV/√Hz noise voltage....
Datasheet
LT6200 on Analog.com
LTC3785-1
Production
The LTC3785-1 is a high power synchronous buck-boost controller that drives all N-channel power MOSFETs from input voltages above, below and equal to the...
Datasheet
LTC3785-1 on Analog.com
LT6001
Production
The LT6000/LT6001/LT6002 are single, dual and quad precision rail-to-rail input and output operational amplifiers. Designed to maximize battery life in...
Datasheet
LT6001 on Analog.com
LTP5903-WHR
Last Time Buy
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. Based on the WirelessHART...
Datasheet
LTP5903-WHR on Analog.com
LTC4287
Recommended for New Designs
The LTC4287 is an integrated solution for hot swap applications
that allows a board to be safely inserted and removed from a live
backplane. The dual-gate...
Datasheet
LTC4287 on Analog.com
LT1956
Production
The LT1956/LT1956-5 are 500kHz monolithic buck switching regulators with an input voltage capability up to 60V. A high efficiency 1.5A, 0.2O switch is...
Datasheet
LT1956 on Analog.com
LT1990
Recommended for New Designs
The LT1990 is a micropower precision difference amplifier with a very high common mode input voltage range. It has pin selectable gains of 1 or 10. The...
Datasheet
LT1990 on Analog.com
LT3022
Recommended for New Designs
The LT3022 is a very low dropout voltage (VLDO™) linear regulator that operates from single input supplies down to 0.9V. The device supplies 1A output...
Datasheet
LT3022 on Analog.com
LTC3883
Recommended for New Designs
The LTC3883/LTC3883-1 are PolyPhase capable DC/DC synchronous step-down switching regulator controllers with a PMBus compliant serial interface. The controllers...
Datasheet
LTC3883 on Analog.com
LTM4676
Obsolete
The LTM4676 is a dual 13A or single 26A step-down uModule® (power module) DC/DC regulator featuring remote configurability and telemetry-monitoring of...
Datasheet
LTM4676 on Analog.com
LT3083
Recommended for New Designs
The LT3083 is a 3A low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Architected...
Datasheet
LT3083 on Analog.com
LTC1445
Production
The LTC1443/LTC1444/LTC1445 are ultralow power quad comparators with a built-in reference. The comparators feature less than 8.5µA supply current over...
Datasheet
LTC1445 on Analog.com
LT3922-1
Production
The LT3922-1 is a monolithic, synchronous, step-up DC/
DC converter that utilizes fixed-frequency, peak current
control and provides PWM dimming for a...
Datasheet
LT3922-1 on Analog.com
LT1946A
Production
The LT1946A is a fixed frequency step-up DC/DC converter containing an internal 1.5A, 36V switch. Capable of generating 12V at 430mA from a 5V input, the...
Datasheet
LT1946A on Analog.com
LTC1283
Production
The LTC1283 is a 3V data acquisition component which contains a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor technology...
Datasheet
LTC1283 on Analog.com
LTM4622A
Recommended for New Designs
The LTM4622A is a complete dual 2A step-down switching mode μModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 2...
Datasheet
LTM4622A on Analog.com
LTC1347
Production
The LTC1347 is a 3-driver/5-receiver RS232 transceiver with very low supply current. In the no load condition, the supply current is only 300µA. The charge...
Datasheet
LTC1347 on Analog.com
LTM8052
Recommended for New Designs
The LTM8052/LTM8052A is a 36VIN, 5A, 2-quadrant constant-voltage, constant-current (CVCC) step-down μModule® (power module) regulator. Included in the...
Datasheet
LTM8052 on Analog.com
LTC3441
Production
The LTC3441 is a high efficiency, fixed frequency, buck-boost DC/DC converter that operates efficiently from input voltages above, below or equal to the...
Datasheet
LTC3441 on Analog.com
LT5534
Production
The LT5534 is a 50MHz to 3GHz monolithic RF power detector capable of measuring RF signals over a 60dB dynamic range. The RF signal in a decibel scale...
Datasheet
LT5534 on Analog.com
LT1375
Production
The LT1375/LT1376 are 500kHz monolithic buck mode switching regulators. A 1.5A switch is included on the die along with all the necessary oscillator, control...
Datasheet
LT1375 on Analog.com
LT8494
Recommended for New Designs
The LT8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7µA when operating and is ...
Datasheet
LT8494 on Analog.com
LTC2377-18
Production
The LTC2377-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2377-18 has...
Datasheet
LTC2377-18 on Analog.com
LTC4156
Recommended for New Designs
The LTC4156 is a 15 watt I2C controlled power manager with PowerPath™ instant-on operation, high efficiency switching battery charging and USB compatibility...
Datasheet
LTC4156 on Analog.com
LTC1415
Production
The LTC1415 is a 700ns, 1.25Msps, 12-bit sampling A/D converter that draws only 55mW from a single 5V supply. This easy-to-use device includes a high dynamic...
Datasheet
LTC1415 on Analog.com
LTC3858-2
Recommended for New Designs
The LTC3858-2 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3858-2 on Analog.com
LTC2250
Production
The LTC2251/LTC2250 are 10-bit 125Msps/105Msps, low noise 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2251...
Datasheet
LTC2250 on Analog.com
LTC6911
Production
The LTC6911 is a family of low noise digitally programmable gain amplifiers (PGAs) that are easy to use and occupy very little PC board space. The matched...
Datasheet
LTC6911 on Analog.com
LTM8050
Production
The LTM8050 is a 58VIN, 2A step down µModule® (power module) converter. Included in the package are the switching controller, power switches, inductor...
Datasheet
LTM8050 on Analog.com
LTC4267-3
Production
The LTC4267-3 combines an IEEE 802.3af compliant Powered Device (PD) interface with a 300kHz current mode switching regulator, providing a complete power...
Datasheet
LTC4267-3 on Analog.com
LT3798
Production
The LT3798 is a constant-voltage/constant-current isolated flyback controller that combines active power factor correction (PFC) with no opto-coupler required...
Datasheet
LT3798 on Analog.com
LTC3631
Production
The LTC3631 is a high voltage, high efficiency step-down DC/DC converter with internal high side and synchronous power switches that draws only 12µA typical...
Datasheet
LTC3631 on Analog.com
LTC1155
Production
The LTC1155 dual high side gate driver allows using low cost N-channel FETs for high side switching applications. An internal charge pump boosts the gate...
Datasheet
LTC1155 on Analog.com
LTC6090
Recommended for New Designs
The LTC6090/LTC6090-5 are high voltage, precision monolithic operational amplifiers. The LTC6090 is unity gain stable. The LTC6090-5 is stable in noise...
Datasheet
LTC6090 on Analog.com
LT8584
Recommended for New Designs
The LT8584 is a monolithic flyback DC/DC converter designed to actively balance high voltage stacks of batteries. The high efficiency of a switching regulator...
Datasheet
LT8584 on Analog.com
LTC4225
Production
The LTC4225 offers ideal diode and Hot Swap™ functions for two power rails by controlling external series connected N-channel MOSFETs. MOSFETs acting as...
Datasheet
LTC4225 on Analog.com
LTC2612
Production
The LTC2602/LTC2612/LTC2622 are dual 16-,14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs, in a tiny 8-lead MSOP package. They have built...
Datasheet
LTC2612 on Analog.com
LT5575
Production
The LT5575 is an 800MHz to 2.7GHz direct conversion quadrature demodulator optimized for high linearity receiver applications. It is suitable for communications...
Datasheet
LT5575 on Analog.com
LTC2288
Production
The LTC2288/LTC2287/LTC2286 are 10-bit 65Msps/ 40Msps/25Msps, low noise dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2288 on Analog.com
LT3437
Production
The LT3437 is a 200kHz monolithic buck switching regulator that accepts input voltages up to 80V. A high efficiency 500mA, 0.8O switch is included on the...
Datasheet
LT3437 on Analog.com
LTC3873
Production
The LTC3873 is a constant frequency, current mode, boost, flyback or SEPIC DC/DC controller that drives an N-channel power MOSFET in high input and output...
Datasheet
LTC3873 on Analog.com
LT1167
Production
The LT1167 is a low power, precision instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. The low voltage noise...
Datasheet
LT1167 on Analog.com
LTC1044S8
Production
The LTC1044 is a monolithic CMOS switched capacitor voltage converter which is manufactured using our enhanced LTCMOSTM silicon gate process. The LTC1044...
Datasheet
LTC1044S8 on Analog.com
LTC1748
Production
The LTC1748 is an 80Msps, sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1748 on Analog.com
LTC2408
Production
The LTC2404/LTC2408 are 4-/8-channel 2.7V to 5.5V micropower 24-bit A/D converters with an integrated oscillator, 4ppm INL and 0.3ppm RMS noise. They use...
Datasheet
LTC2408 on Analog.com
LTC3703
Production
The LTC3703 is a synchronous step-down switching regulator controller that can directly step-down voltages from up to 100V, making it ideal for telecom...
Datasheet
LTC3703 on Analog.com
LT1081
Production
The LT1080/LT1081 are the only dual RS232 driver/receiver with charge pump to guarantee absolutely no latchup. These interface optimized devices provide...
Datasheet
LT1081 on Analog.com
LTC4317
Production
The LTC4317 enables the hardwired address of one or more I2C or SMBus slave device to be translated to a different address. This allows slaves with the...
Datasheet
LTC4317 on Analog.com
LTC2372-16
Production
The LTC2372-16 is a low noise, high speed, 8-channel 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2372...
Datasheet
LTC2372-16 on Analog.com
LT1008
Production
The LT1008 is a universal precision operational amplifier which can be used in practically all precision applications. The LT1008 combines for the first...
Datasheet
LT1008 on Analog.com
LTC3405A-1.5
Production
The LTC3405A-1.5/LTC3405A-1.8 are high efficiency monolithic synchronous buck regulators using a constant frequency, current mode architecture. Supply...
Datasheet
LTC3405A-1.5 on Analog.com
LT2078
Production
The LT2078 is a micropower dual op amp in 8-pin small outline, standard surface mount package, and LT2079 is a micropower quad op amp offered in the standard...
Datasheet
LT2078 on Analog.com
LTC488
Production
The LTC488 and LTC489 are low power differential bus/line receivers designed for multipoint data transmission standard RS485 applications with extended...
Datasheet
LTC488 on Analog.com
LTM8029
Recommended for New Designs
The LTM8029 is a 36VIN, 600mA step-down µModule® converter with 5µA quiescent current. It is an adjustable frequency buck switching regulator that consumes...
Datasheet
LTM8029 on Analog.com
LT8710
Recommended for New Designs
The LT8710 is a synchronous PWM DC/DC controller with a rail-to-rail output current monitor and control. The LT8710 is ideal for many types of power supply...
Datasheet
LT8710 on Analog.com
LTC7150S
Recommended for New Designs
The LTC7150S is a high efficiency monolithic synchronous buck regulator capable of delivering 20A to the load. It uses a phase lockable controlled on-time...
Datasheet
LTC7150S on Analog.com
LTC1649
Production
The LTC1649 is a high power, high efficiency switching regulator controller optimized for use with very low supply voltages. It operates from 2.7V to 5V...
Datasheet
LTC1649 on Analog.com
LT8614
Production
The LT8614 step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency at frequencies...
Datasheet
LT8614 on Analog.com
LTC2640
Production
The LTC2640 is a family of 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift reference in an 8-lead TSOT-23 package...
Datasheet
LTC2640 on Analog.com
LT3498
Production
The LT3498 is a dual output boost converter featuring a 2.3MHz PWM LED Driver and PFM OLED Driver. It includes an internal power switch and Schottky diode...
LT3498 on Analog.com
LT6654BX
Recommended for New Designs
The LT6654BX is a 2.5V precision voltage reference that is rated for operation up to 175°C junction temperature. The LT6654BX operates from voltages up...
Datasheet
LT6654BX on Analog.com
LTC7892
Recommended for New Designs
The LTC®7892 is a high-performance dual boost
DC-to-DC switching regulator controller that drives all
N-channel synchronous gallium nitride (GaN) field...
Datasheet
LTC7892 on Analog.com
LTC2229
Production
The LTC2229 is a 12-bit 80Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2229 is perfect for...
Datasheet
LTC2229 on Analog.com
LT1993-4
Not Recommended for New Designs
The LT1993-4 is a low distortion, low noise Differential Amplifier/ADC driver for use in applications from DC to 900MHz. The LT1993-4 has been designed...
Datasheet
LT1993-4 on Analog.com
LT3479
Production
The LT3479 is a current mode, fixed frequency step-up DC/DC converter with an internal 3A, 42V switch. Efficiencies of up to 89% can be achieved in typical...
Datasheet
LT3479 on Analog.com
LTC3646
Production
The LTC3646 is a high efficiency, step-down DC/DC converter with internal high side and synchronous power FETs. It draws only 140µA typical DC supply current...
Datasheet
LTC3646 on Analog.com
LTC1664
Production
The LTC1664 integrates four accurate, serially addressable 10-bit digital-to-analog converters (DACs) in a tiny 16-pin Narrow SSOP package. Each buffered...
Datasheet
LTC1664 on Analog.com
LT1172
Production
The LT1170/LT1171/LT1172 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck,...
Datasheet
LT1172 on Analog.com
LTC3375
Recommended for New Designs
The LTC3375 is a digitally programmable high efficiency multioutput power supply IC. The DC/DCs consist of eight synchronous buck converters (IOUT up to...
Datasheet
LTC3375 on Analog.com
LTC1727
Production
The LTC1727 is a triple supply monitor intended for systems with multiple supply voltages. Each supply monitor has its own open-drain output for individual...
Datasheet
LTC1727 on Analog.com
LT1619
Production
The LT1619 is a fixed frequency PWM controller for implementing current mode DC/DC converters with minimum external parts. The LT1619 operates with input...
Datasheet
LT1619 on Analog.com
LTC1065
Production
The LTC1065 is the first monolithic filter providing both clock-tunability with low DC output offset and over 12-bit DC accuracy. The frequency response...
Datasheet
LTC1065 on Analog.com
LTC4232
Recommended for New Designs
The LTC4232 is an integrated solution for Hot Swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates...
Datasheet
LTC4232 on Analog.com
LTC3025-1
Production
The LTC3025-X is a micropower, VLDOâ„¢ (very low dropout) linear regulator which operates from input voltages as low as 0.9V. The device is capable of...
Datasheet
LTC3025-1 on Analog.com
LTC2984
Recommended for New Designs
The LTC2984 measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution...
Datasheet
LTC2984 on Analog.com
LTC1053
Production
The LTC1051/LTC1053 are high performance, low cost dual/quad zero-drift operational amplifiers. The unique achievement of the LTC1051/LTC1053 is that they...
Datasheet
LTC1053 on Analog.com
LTC2930
Production
The LTC2930 is a con?gurable supply monitor for systems with up to six supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2930 on Analog.com
LT1737
Production
The LT1737 is a monolithic switching regulator controller specifically designed for the isolated flyback topology. It drives the gate of an external MOSFET...
Datasheet
LT1737 on Analog.com
LTC2216
Production
The LTC2216/LTC2215 are 80Msps/65Msps sampling 16- bit A/D converters designed for digitizing high frequency, wide dynamic range signals with input frequencies...
Datasheet
LTC2216 on Analog.com
LT6551
Not Recommended for New Designs
The LT6550/LT6551 are 3.3V triple and quad high speed video amplifiers. These voltage feedback amplifiers drive double terminated 50O or 75O cables and...
Datasheet
LT6551 on Analog.com
LT8648SP
Recommended for New Designs
The LT®8648S/LT8648SP synchronous step-down
regulator features second generation Silent Switcher
architecture designed to minimize EMI emissions while...
Datasheet
LT8648SP on Analog.com
LT3150
Recommended for New Designs
The LT3150 drives a low cost external N-channel MOSFET as a source follower to produce a fast transient response, very low dropout voltage linear regulator...
Datasheet
LT3150 on Analog.com
LTC2309
Production
The LTC2309 is a low noise, low power, 8-channel, 12-bit successive approximation ADC with an I2C compatible serial interface. This ADC includes an internal...
Datasheet
LTC2309 on Analog.com
LTM4668
Recommended for New Designs
The LTM4668 is a quad DC/DC step-down µModule (micromodule) regulator with 1.2A DC current per output. Outputs can be paralleled in an array for up to...
Datasheet
LTM4668 on Analog.com
LT3799-1
Production
The LT3799-1 is an isolated flyback controller with power factor correction specifically designed for driving LEDs. The controller operates using critical...
Datasheet
LT3799-1 on Analog.com
LTC3864
Production
The LTC3864 is a robust, high voltage step-down DC/DC controller optimized for automotive and industrial applications. It drives a P-channel power MOSFET...
Datasheet
LTC3864 on Analog.com
LTC7819
Recommended for New Designs
The LTC7819 is a high performance triple step-down synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET stages. Constant...
Datasheet
LTC7819 on Analog.com
LT6205
Production
The LT6205/LT6206/LT6207 are low cost single/dual/quad voltage feedback amplifiers that feature 100MHz gain-bandwidth product, 450V/µs slew rate and 50mA...
Datasheet
LT6205 on Analog.com
LT3473
Production
The LT3473/LT3473A are micropower step-up DC/DC converters with integrated Schottky diode and output disconnect circuitry in low profile DFN packages....
Datasheet
LT3473 on Analog.com
LT1055
Production
The LT1055/LT1056 JFET input operational amplifiers combine precision specifications with high speed performance.
For the first time, 16V/µs slew rate...
Datasheet
LT1055 on Analog.com
LT8692S
Recommended for New Designs
The LT8692S is a quad channel step-down, current mode, monolithic buck switching regulator. All regulators are synchronized to a single oscillator with...
Datasheet
LT8692S on Analog.com
LTC2285
Production
The LTC2285 is a 14-bit 125Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2285 is perfect...
Datasheet
LTC2285 on Analog.com
LTC1261L
Production
The LTC1261L is a switched-capacitor voltage inverter designed to provide a regulated negative voltage from a single positive supply. The LTC1261L operates...
Datasheet
LTC1261L on Analog.com
LT3071
Recommended for New Designs
The LT3071 is a low voltage, UltraFastâ„¢ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage...
Datasheet
LT3071 on Analog.com
LT3686A
Production
The LT3686A is a current mode PWM step-down DC/DC converter with an internal power switch. The wide input range of 3.6V to 37V makes the LT3686A suitable...
Datasheet
LT3686A on Analog.com
LT1134A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1134A on Analog.com
LT1714
Production
The LT1713/LT1714 are UltraFast™ 7ns, single/dual comparators featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized...
Datasheet
LT1714 on Analog.com
LTC2227
Production
The LTC2228/LTC2227/LTC2226 are 12-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2227 on Analog.com
LTC1344A
Production
The LTC1344A features six software-selectable multiprotocol cable terminators. Each terminator can be configured as an RS422 (V.11) 100O minimum differential...
Datasheet
LTC1344A on Analog.com
LTC4232-1
Recommended for New Designs
The LTC4232-1 is an integrated solution for Hot Swap applications that allows a board to be safely inserted and removed from a live backplane. The part...
Datasheet
LTC4232-1 on Analog.com
LTC7897
Recommended for New Designs
The LTC®7897 is a high performance, 100% duty cycle
capable, synchronous step-down, DC/DC switching
regulator controller that drives all N-channel
synchronous...
Datasheet
LTC7897 on Analog.com
LTC1402
Production
The LTC1402 is a 12-bit, 2.2Msps sampling A/D converter. This high performance device includes a high dynamic range sample-and-hold and a precision reference...
Datasheet
LTC1402 on Analog.com
LTC3608
Production
The LTC3608 is a high efficiency, monolithic synchronous step-down DC/DC converter that can deliver up to 8A output current from a 4V to 18V (20V maximum...
Datasheet
LTC3608 on Analog.com
LT8310
Production
The LT8310 is a simple-to-use resonant reset forward converter controller that drives the gate of a low side N-channel MOSFET from an internally regulated...
Datasheet
LT8310 on Analog.com
LT3493
Production
The LT3493 is a current mode PWM step-down DC/DC converter with an internal 1.75A power switch. The wide operating input range of 3.6V to 36V (40V maximum...
Datasheet
LT3493 on Analog.com
LTC2616
Production
The LTC2606/LTC2616/LTC2626 are single 16-, 14- and 12-bit, 2.7V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2616 on Analog.com
LTC3130
Recommended for New Designs
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light...
Datasheet
LTC3130 on Analog.com
LTC4007-1
Production
The LTC4007-1 is a constant-current/constant-voltage charger controller for 3- or 4-cell lithium-ion batteries. The PWM controller uses a synchronous,...
Datasheet
LTC4007-1 on Analog.com
LT8335
Last Time Buy
The LT8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured...
Datasheet
LT8335 on Analog.com
LTC2232
Production
The LTC2232 and LTC2233 are 105Msps/80Msps, sampling 10-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2232...
Datasheet
LTC2232 on Analog.com
LTC3711
Production
The LTC3711 is a synchronous step-down switching regulator controller for CPU power. An output voltage between 0.925V and 2.000V is selected by a 5-bit...
Datasheet
LTC3711 on Analog.com
LT1123
Production
The LT1123 is a 3-pin bipolar device designed to be used in conjunction with a discrete PNP power transistor to form an inexpensive low dropout regulator...
Datasheet
LT1123 on Analog.com
LTC1569-7
Production
The LTC1569-7 is a 10th order lowpass filter featuring linear phase and a root raised cosine amplitude response. The high selectivity of the LTC1569-7...
Datasheet
LTC1569-7 on Analog.com
LTC4416
Recommended for New Designs
The LTC4416/LTC4416-1 control two sets of external P-channel MOSFETs to create two near ideal diode functions for power switchover circuits. This permits...
Datasheet
LTC4416 on Analog.com
LT3154
Recommended for New Designs
The LT3154 is a highly efficient, high current, buck‑boost DC/DC converter that operates from input voltages above, below or equal to the regulated output...
Datasheet
LT3154 on Analog.com
LTC4236
Recommended for New Designs
The LTC4236 offers ideal diode-OR and Hot Swap functions for two power rails by controlling external N-channel MOSFETs. MOSFETs acting as ideal diodes...
Datasheet
LTC4236 on Analog.com
LTC2201
Production
The LTC2201 is a 20Msps, sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals with input frequencies up to...
Datasheet
LTC2201 on Analog.com
LTC1064-2
Production
The LTC1064-2 is a monolithic 8th order lowpass Butterworth filter, which provides a maximally flat passband. The attenuation slope is -48dB/octave and...
Datasheet
LTC1064-2 on Analog.com
LT3471
Production
The LT3471 dual switching regulator combines two 42V, 1.3A switches with error amplifiers that can sense to ground providing boost and inverting capability...
Datasheet
LT3471 on Analog.com
LTC4354
Production
The LTC4354 is a negative voltage diode-OR controller that drives two external N-channel MOSFETs. It replaces two Schottky diodes and the associated heatsink...
Datasheet
LTC4354 on Analog.com
LTC1542
Production
The LTC1541/LTC1542 combine a micropower amplifier, comparator and bandgap reference (LTC1541) in an 8-pin package. The part operates from a single 2.5V...
Datasheet
LTC1542 on Analog.com
LTC2155-14
Production
The LTC2157-14/LTC2156-14/LTC2155-14 are 2-channel simultaneous sampling 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency...
Datasheet
LTC2155-14 on Analog.com
LTC2205-14
Production
The LTC2205-14 is a sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals up to input frequencies of 700MHz...
Datasheet
LTC2205-14 on Analog.com
LTC4253A-ADJ
Obsolete
The LTC4253A-ADJ negative voltage Hot Swapâ„¢ controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled...
Datasheet
LTC4253A-ADJ on Analog.com
LTC2357-18
Production
The LTC2357-18 is an 18-bit, low noise 4-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2357-18 on Analog.com
LTC2704
Production
The LTC2704-16/LTC2704-14/LTC2704-12 are serial input, 12-, 14- or 16-bit, voltage output SoftSpan™ DACs that operate from 3V to 5V logic and ±5V to ±15V...
Datasheet
LTC2704 on Analog.com
LTC3490
Production
The LTC3490 provides a constant current drive for 1W LED applications. It is a high efficiency boost converter that operates from 1 or 2 NiMH or alkaline...
Datasheet
LTC3490 on Analog.com
LTC6810-1
Production
The LTC6810 is a multicell battery stack monitor. The LTC6810 measures up to 6 series-connected battery cells with a total measurement error of less than...
Datasheet
LTC6810-1 on Analog.com
LT1970A
Recommended for New Designs
The LT1970A is a ±500mA power op amp with precise externally controlled current limiting. Separate control voltages program the sourcing and sinking current...
Datasheet
LT1970A on Analog.com
LTC2261-14
Production
The LTC2261-14/LTC2260-14/LTC2259-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2261-14 on Analog.com
LT1640A
Production
The LT1640AL/LT1640AH are 8-pin, negative voltage Hot Swap™ controllers that allow a board to be safely inserted and removed from a live backplane. Inrush...
Datasheet
LT1640A on Analog.com
LT1936
Production
The LT1936 is a current mode PWM step-down DC/DC converter with an internal 1.9A power switch, packaged in a tiny, thermally enhanced 8-lead MSOP. The...
Datasheet
LT1936 on Analog.com
LTC5584
Production
The LTC5584 is a direct conversion quadrature demodulator optimized for high linearity receiver applications in the 30MHz to 1.4GHz frequency range. It...
Datasheet
LTC5584 on Analog.com
LT1815
Production
The LT1815/LT1816/LT1817 are low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1815/LT1816/LT1817...
Datasheet
LT1815 on Analog.com
LTC3548A
Production
The LTC3548A is a dual, constant frequency, synchronous step-down DC/DC converter. Intended for low power applications, it operates from a 2.5V to 5.5V...
Datasheet
LTC3548A on Analog.com
LTC3528
Recommended for New Designs
The LTC3528/LTC3528B are synchronous, fixed frequency step-up DC/DC converters with output disconnect. High efficiency synchronous rectification, in addition...
Datasheet
LTC3528 on Analog.com
LT1187
Production
The LT1187 is a difference amplifier optimized for operation on ±5V, or a single 5V supply and gain ≥2. This versatile amplifier features uncommitted...
Datasheet
LT1187 on Analog.com
LT1881
Production
The LT1881 and LT1882 op amps bring high accuracy input performance to amplifiers with rail-to-rail output swing. Input bias currents and capacitive load...
Datasheet
LT1881 on Analog.com
LT1116
Production
The LT1116 is an ultra fast (12ns) comparator designed for sensing signals near the negative supply. The input common mode range extends from 2.5V below...
Datasheet
LT1116 on Analog.com
LT3486
Production
The LT3486 is a dual step-up DC/DC converter specifically designed to drive up to 16 White LEDs (8 in series per converter) at constant current from a...
Datasheet
LT3486 on Analog.com
LT1307
Production
The LT1307/LT1307B are micropower, fixed frequency DC/DC converters that operate from an input voltage as low as 1V. First in the industry to achieve true...
Datasheet
LT1307 on Analog.com
LTC2251
Production
The LTC2251/LTC2250 are 10-bit 125Msps/105Msps, low noise 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2251...
Datasheet
LTC2251 on Analog.com
LT3825
Production
The LT3825 is an isolated switching regulator controller designed for medium power flyback topologies. A typical application is 10W to 60W with input voltage...
Datasheet
LT3825 on Analog.com
LTC2188
Production
The LTC2188 is a two-channel simultaneous sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect...
Datasheet
LTC2188 on Analog.com
LTC6952
Last Time Buy
The LTC6952 is a high performance, ultralow jitter,
JESD204B/C clock generation and distribution IC. It
includes a Phase Locked Loop (PLL) core, consisting...
Datasheet
LTC6952 on Analog.com
LTM4630-1
Recommended for New Designs
The LTM4630-1A/LTM4630-1B are dual 18A or single 36A output step-down μModule® (power module) regulators with ±0.8% (LTM4630-1A) and ±1.5% (LTM4630...
Datasheet
LTM4630-1 on Analog.com
LT1004
Production
The LT1004 Micropower Voltage Reference is a 2-terminal bandgap reference diode designed to provide high accuracy and excellent temperature characteristics...
Datasheet
LT1004 on Analog.com
LTC6905
Production
The LTC6905 precision, programmable silicon oscillator is easy to use and occupies very little board space. It requires only a single resistor to set the...
Datasheet
LTC6905 on Analog.com
LT6301
Production
The LT6301 is a 500mA minimum output current, quad op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily...
Datasheet
LT6301 on Analog.com
LTC4124
Recommended for New Designs
The LTC4124 is a simple high performance wireless Li-Ion charger with low battery disconnect. The pin-selectable charge current (up to 100mA) and charge...
Datasheet
LTC4124 on Analog.com
LT1461
Production
The LT1461 is a family of low dropout micropower band-gap references that combine very high accuracy and low drift with low supply current and high output...
Datasheet
LT1461 on Analog.com
LTC1050
Production
The LTC1050 is a high performance, low cost zero-drift operational amplifier. The unique achievement of the LTC1050 is that it integrates on-chip the two...
Datasheet
LTC1050 on Analog.com
LTC2220-1
Production
The LTC2220-1 is a 185Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2220-1 is perfect...
Datasheet
LTC2220-1 on Analog.com
LTC2185
Production
The LTC2185/LTC2184/LTC2183 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2185 on Analog.com
LTC4015
Recommended for New Designs
The LTC4015 is a complete synchronous buck controller/charger with pin-selectable, chemistry specific charging and termination algorithms.
The LTC4015...
Datasheet
LTC4015 on Analog.com
LT1993-10
Not Recommended for New Designs
The LT1993-10 is a low distortion, low noise Differential Amplifier/ADC driver for use in applications from DC to 700MHz. The LT1993-10 has been designed...
Datasheet
LT1993-10 on Analog.com
LT1885
Production
The LT1884/LT1885 op amps bring high accuracy input performance to amplifiers with rail-to-rail output swing while providing faster response than other...
Datasheet
LT1885 on Analog.com
LTC3207
Production
The LTC3207/LTC3207-1 are highly integrated multi-display LED drivers. The device contains a high-efficiency, low-noise charge pump to provide power to...
Datasheet
LTC3207 on Analog.com
LTC3778
Production
The LTC3778 is a synchronous step-down switching regulator controller for computer memory, automobile and other DC/DC power supplies. The controller uses...
Datasheet
LTC3778 on Analog.com
LTC2611
Production
The LTC2601/LTC2611/LTC2621 are single 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2611 on Analog.com
LTC3838-1
Recommended for New Designs
The LTC3838-1 is a dual-channel, PolyPhase® synchronous step-down DC/DC switching regulator controller. Two independent channels drive all N-channel power...
Datasheet
LTC3838-1 on Analog.com
LTC2308
Production
The LTC2308 is a low noise, 500ksps, 8-channel, 12-bit ADC with an SPI/MICROWIRE compatible serial interface. This ADC includes an internal reference and...
Datasheet
LTC2308 on Analog.com
LTC2367-18
Production
The LTC2367-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2367-18 has...
Datasheet
LTC2367-18 on Analog.com
LT1186F
Production
The LT11186F is a fixed frequency, current mode, switching regulator that provides the control function for Cold Cathode Fluorescent Lighting (CCFL). The...
Datasheet
LT1186F on Analog.com
LT1534
Production
The LT1534/LT1534-1 are a new class of switching regulator designed to reduce conducted and radiated electromagnetic interference (EMI). Ultralow noise...
Datasheet
LT1534 on Analog.com
LTC3677-3
Recommended for New Designs
The LTC3677-3 is a highly integrated power management IC for single-cell Li-Ion/Polymer battery applications. It includes a PowerPath manager with automatic...
Datasheet
LTC3677-3 on Analog.com
LT1085-Fixed
Production
The LT1083 series of positive adjustable regulators are designed to provide 3A, 5A and 7.5A with higher efficiency than currently available devices. All...
Datasheet
LT1085-Fixed on Analog.com
LT3795
Production
The LT3795 is a DC/DC controller designed to regulate a constant-current or constant-voltage and is ideal for driving LEDs. It drives a low side external...
Datasheet
LT3795 on Analog.com
LTM4611
Recommended for New Designs
The LTM4611 is a high density 15A output, switch mode DC/DC buck converter power supply capable of operating from very low voltage input supplies. Included...
Datasheet
LTM4611 on Analog.com
LTC2335-18
Production
The LTC2335-18 is an 18-bit, low noise 8-channel multiplexed successive approximation register (SAR) ADC with differential, wide common mode range inputs...
Datasheet
LTC2335-18 on Analog.com
LTC1597
Production
The LTC1591/LTC1597 are pin compatible, parallel input 14-bit and 16-bit multiplying current output DACs that operate from a single 5V supply. INL and...
Datasheet
LTC1597 on Analog.com
LT3641
Production
The LT3641 is a dual channel, current mode monolithic buck switching regulator with a power-on reset and a watchdog timer. Both regulators are synchronized...
Datasheet
LT3641 on Analog.com
LTC4372
Recommended for New Designs
The LTC4372/LTC4373 are positive high voltage ideal diode controllers that drive an external N-channel MOSFET to replace a Schottky diode. They control...
Datasheet
LTC4372 on Analog.com
LT3692A
Production
The LT3692A is a dual current mode PWM step-down DC/DC converter with two internal 3.8A switches. Independent input voltage, shutdown, feedback, soft-start...
Datasheet
LT3692A on Analog.com
LTC2859
Production
The LTC2859 and LTC2861 are low power, 20Mbps RS485/422 transceivers operating on 5V supplies. The receiver includes a logic-selectable 120O termination...
Datasheet
LTC2859 on Analog.com
LTC4060
Production
The LTC4060 is a complete fast charging system for NiMH or NiCd batteries. Just a few external components are needed to design a standalone linear charging...
Datasheet
LTC4060 on Analog.com
LT3500
Production
The LT3500 is a current mode PWM step-down DC/DC converter with an internal 2.3A switch. The wide input range of 3V to 40V makes the LT3500 suitable for...
Datasheet
LT3500 on Analog.com
LTC3525D-3.3
Recommended for New Designs
The LTC3525D-3.3 is a high efficiency synchronous stepup DC/DC converter that can start up with an input as low as 0.85V. It offers a compact, high efficiency...
Datasheet
LTC3525D-3.3 on Analog.com
LTC6253-7
Last Time Buy
The LTC6253-7 is a dual high speed, low power, rail-to-rail input/output operational amplifier. On only 3.5mA of supply current, it features a 2GHz gain...
LTC6253-7 on Analog.com
LTC2272
Production
The LTC2273/LTC2272 are 80Msps/65Msps, 16-bit A/D converters with a high speed serial interface. They are designed for digitizing high frequency, wide...
Datasheet
LTC2272 on Analog.com
LTP5901-IPM
Production
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTP5901...
Datasheet
LTP5901-IPM on Analog.com
LTC3787
Recommended for New Designs
The LTC3787 is a high performance PolyPhase® single output synchronous boost converter controller that drives two N-channel power MOSFET stages out-of...
Datasheet
LTC3787 on Analog.com
LTC2270
Production
The LTC2270 is a two-channel simultaneous sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect...
Datasheet
LTC2270 on Analog.com
LT1224
Production
The LT1224 is a very high speed operational amplifier with excellent DC performance. The LT1224 features reduced input offset voltage and higher DC gain...
Datasheet
LT1224 on Analog.com
LTC3201
Production
The LTC3201 is an ultralow noise, constant frequency, charge pump DC/DC converter specifically designed for powering white LEDs. The part produces a low...
Datasheet
LTC3201 on Analog.com
LT1356
Production
The LT1355/LT1356 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1356 on Analog.com
LT1223
Production
The LT1223 is a 100MHz current feedback amplifier with very good DC characteristics. The LT1223's high slew rate, 1000V/µs, wide supply range, ±15V, and...
Datasheet
LT1223 on Analog.com
LTC2153-14
Not Recommended for New Designs
The LTC2153-14 is a 310Msps 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications...
Datasheet
LTC2153-14 on Analog.com
LTC4376
Recommended for New Designs
The LTC4376 is a 7A ideal diode that uses an internal 15mΩ N-channel MOSFET to replace a Schottky diode when used in diode-OR and high current diode applications...
Datasheet
LTC4376 on Analog.com
LTC2928
Recommended for New Designs
The LTC2928 is a four channel cascadable power supply sequencer and high accuracy supervisor. Sequencing thresholds, order and timing are con?gured with...
Datasheet
LTC2928 on Analog.com
LT3595
Production
The LT3595 is a high performance LED Driver designed to drive sixteen independent channels of up to 10 LEDs at currents up to 50mA. Series connection of...
Datasheet
LT3595 on Analog.com
LT1462
Production
The LT1462 (dual) and LT1463 (quad) are the first micropower op amps (45µA max per amp) to offer picoampere input bias currents (1pA typ) and unity gain...
Datasheet
LT1462 on Analog.com
LT3431
Production
The LT3431 is a 500kHz monolithic buck switching regulator that accepts input voltages up to 60V. A high efficiency 3A, 0.1? switch is included on the...
Datasheet
LT3431 on Analog.com
LTC4126-10
Recommended for New Designs
The LTC4126-10 is a low-power wireless single-cell Li-Ion battery charger with an integrated step-down DC/ DC regulator. The step-down regulator is a low...
Datasheet
LTC4126-10 on Analog.com
LT3085
Recommended for New Designs
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed...
Datasheet
LT3085 on Analog.com
LTC2446
Production
The LTC2446/LTC2447 4-terminal switching enables multiplexed ratiometric measurements. Four sets of selectable differential inputs coupled with four sets...
Datasheet
LTC2446 on Analog.com
LTC4305
Production
The LTC4305 is a 2-channel, 2-wire bus multiplexer with bus buffers to provide capacitive isolation between the upstream bus and downstream buses. Through...
Datasheet
LTC4305 on Analog.com
LTC1734
Production
The LTC1734 is a low cost, single cell, constant-current/constant-voltage Li-Ion battery charger controller. When combined with a few external components...
Datasheet
LTC1734 on Analog.com
LTC1322
Production
The LTC1321/LTC1322/LTC1335 are low power CMOS bidirectional transceivers, each featuring two reconfigurable interface ports. Each can be configured as...
Datasheet
LTC1322 on Analog.com
LTC1142
Production
The LTC1142/LTC1142L/LTC1142HV are dual synchronous step-down switching regulator controllers featuring automatic Burst Mode™ operation to maintain high...
Datasheet
LTC1142 on Analog.com
LTC2915
Production
The LTC2915/LTC2916 are low voltage single-supply monitors with selectable thresholds. The parts operate from 1.5V to 5.5V and consume a quiescent current...
Datasheet
LTC2915 on Analog.com
LTC2341-18
Production
The LTC2341-18 is an 18-bit, low noise 2-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode...
Datasheet
LTC2341-18 on Analog.com
LTC5505
Production
The LTC5505-X is an RF power detector for RF applications operating in the 300MHz to 3.5GHz range. A temperature compensated Schottky diode peak detector...
Datasheet
LTC5505 on Analog.com
LTM8033
Production
The LTM8033 is an electromagnetic compatible (EMC) 36V, 3A DC/DC µModule® (power module) buck converter designed to meet the radiated emissions requirements...
Datasheet
LTM8033 on Analog.com
LT5515
Last Time Buy
The LT5515 is a 1.5GHz to 2.5GHz direct conversion quadrature demodulator optimized for high linearity receiver applications. It is suitable for communications...
Datasheet
LT5515 on Analog.com
LTC1093
Production
The high impedance analog inputs and the ability to operate with reduced spans (below 1V full scale) allow direct connection to sensors and transducers...
Datasheet
LTC1093 on Analog.com
LT5524
Production
The LT5524 is a programmable gain amplifier (PGA) with bandwidth extending from low frequency (LF) to 540MHz. It consists of a digitally controlled variable...
Datasheet
LT5524 on Analog.com
LTC1063
Production
The LTC1063 is the first monolithic filter providing both clock-tunability, low DC output offset and over 12-bit DC accuracy. The frequency response of...
Datasheet
LTC1063 on Analog.com
LT1679
Production
The LT1678/LT1679 are dual/quad rail-to-rail op amps offering both low noise and precision: 3.9nV/vHz wideband noise, 1/f corner frequency of 4Hz and 90nV...
Datasheet
LT1679 on Analog.com
LTC1406
Production
The LTC1406 is a 20Msps, 8-bit, sampling A/D converter which draws only 150mW from a single 5V supply. This easy-to-use device includes a high dynamic...
Datasheet
LTC1406 on Analog.com
LTC695-3.3
Production
The LTC694-3.3/LTC695-3.3 provide complete 3.3V power supply monitoring and battery control functions. These include power-on reset, battery back-up, RAM...
Datasheet
LTC695-3.3 on Analog.com
LT8709
Recommended for New Designs
The LT8709 is a synchronous PWM controller for negative-to-negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor...
Datasheet
LT8709 on Analog.com
LTC4150
Production
The LTC4150 measures battery depletion and charging in handheld PC and portable product applications. The device monitors current through an external sense...
Datasheet
LTC4150 on Analog.com
LTC2979
Recommended for New Designs
The LTC2979 is a 16-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2979 on Analog.com
LTC1874
Production
The LTC1874 is a dual constant frequency current mode step-down DC/DC controller with excellent AC and DC load and line regulation. Each controller has...
Datasheet
LTC1874 on Analog.com
LT1133A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1133A on Analog.com
LTM8008
Recommended for New Designs
The LTM8008 is a 72VIN, µModule (power module) SEPIC converter with six post regulators. The SEPIC controller’s fixed frequency, current-mode architecture...
Datasheet
LTM8008 on Analog.com
LTC3807
Recommended for New Designs
The LTC3807 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage. A constant...
Datasheet
LTC3807 on Analog.com
LT6555
Production
The LT6555 is a high speed triple 2:1 video multiplexer with an internally fixed gain of 2. The individual amplifiers are optimized for performance with...
Datasheet
LT6555 on Analog.com
LTC5589
Production
The LTC5589 is a direct conversion I/Q modulator designed for low power wireless applications that enables direct modulation of differential baseband I...
Datasheet
LTC5589 on Analog.com
LTC1657
Production
The LTC1657/LTC1657L are complete single supply, rail-to-rail voltage output, 16-bit analog-to-digital converters (DAC) in a 28-pin SSOP or PDIP package...
Datasheet
LTC1657 on Analog.com
LT3782
Production
The LT3782 is a current mode two phase step-up DC/DC converter controller. Its high switching frequency (up to 500kHz) and 2-phase operation reduce system...
Datasheet
LT3782 on Analog.com
LTC2290
Production
The LTC2290 is a 12-bit 10Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2290 is perfect...
Datasheet
LTC2290 on Analog.com
LT3434
Production
The LT3434 is a 200kHz monolithic buck switching regulator that accepts input voltages up to 60V. A high efficiency 3A, 0.1? switch is included on the...
Datasheet
LT3434 on Analog.com
LT3804
Production
The LT3804 is a high efficiency step-down switching regulator with optocoupler feedback control for regulating multiple outputs in single-secondary winding...
Datasheet
LT3804 on Analog.com
LTC3265
Recommended for New Designs
The LTC3265 is a low noise dual polarity output power supply including a boost charge pump, an inverting charge pump and two low noise positive and negative...
Datasheet
LTC3265 on Analog.com
LTC1629-6
Production
The LTC1629-6 is a PolyPhase™ synchronous stepdown current mode switching regulator controller with 0.6V reference that drives N-channel external power...
Datasheet
LTC1629-6 on Analog.com
LTC2257-14
Production
The LTC2258-14/LTC2257-14/LTC2256-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2257-14 on Analog.com
LTC1569-6
Production
The LTC1569-6 is a 10th order lowpass filter featuring linear phase and a root raised cosine amplitude response. The high selectivity of the LTC1569-6...
Datasheet
LTC1569-6 on Analog.com
LT1317
Production
The LT1317/LT1317B are micropower, fixed frequency step-up DC/DC converters that operate over a wide input voltage range of 1.5V to 12V. The LT1317 features...
Datasheet
LT1317 on Analog.com
LTC2256-14
Production
The LTC2258-14/LTC2257-14/LTC2256-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2256-14 on Analog.com
LT1070
Production
The LT1070/LT1071 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck, boost,...
Datasheet
LT1070 on Analog.com
LTC3113
Recommended for New Designs
The LTC3113 is a wide VIN range, highly efficient, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal...
Datasheet
LTC3113 on Analog.com
LTM2885
Production
The LTM2885 is a complete galvanically isolated full-duplex RS485/RS422 µModule® (micromodule) transceiver. No external components are required. A single...
Datasheet
LTM2885 on Analog.com
LT3463
Production
The LT3463/LT3463A are dual micropower DC/DC converters with internal Schottky diodes in a 10-lead 3mm × 3mm DFN package. Negative and positive LT3463...
Datasheet
LT3463 on Analog.com
LTC7821
Recommended for New Designs
The LTC7821 uses a proprietary architecture that merges a soft switching charge pump topology with a synchronous step-down converter to provide superior...
Datasheet
LTC7821 on Analog.com
LTC3878
Production
The LTC3878 is a synchronous step-down switching DC/DC controller optimized for high switching frequency and fast transient response. The constant on-time...
Datasheet
LTC3878 on Analog.com
LTC2428
Production
The LTC2424/LTC2428 are 4-/8-channel 2.7V to 5.5V micropower 20-bit A/D converters with an integrated oscillator, 8ppm INL and 1.2ppm RMS noise. They use...
Datasheet
LTC2428 on Analog.com
LTC7893
Recommended for New Designs
The LTC®7893 is a high performance, step-up, dc-to-dc
switching regulator controller that drives all N-channel
synchronous gallium nitride (GaN) field...
Datasheet
LTC7893 on Analog.com
LT3081
Recommended for New Designs
The LT3081 is a 1.5A low dropout linear regulator designed for rugged industrial applications. Key features of the IC are the extended safe operating area...
Datasheet
LT3081 on Analog.com
LTC3822-1
Production
The LTC3822-1 is a synchronous step-down switching regulator controller that drives external N-channel power MOSFETs using few external components. The...
Datasheet
LTC3822-1 on Analog.com
LT3507A
Production
The LT3507A is a triple, current mode, DC/DC converter with internal power switches and a low dropout regulator. The switching converters are step-down...
Datasheet
LT3507A on Analog.com
LT1160
Production
The LT1160/LT1162 are cost effective half-/full-bridge N-channel power MOSFET drivers. The floating driver can drive the topside N-channel power MOSFETs...
Datasheet
LT1160 on Analog.com
LTC9101-2A
Recommended for New Designs
The LTC9101-2A/LTC9102 chipset is a (up to) 48-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 1 and 2 compliant Power...
Datasheet
LTC9101-2A on Analog.com
LTC4350
Not Recommended for New Designs
The LTC4350 is a load share controller that allows systems to equally load multiple power supplies connected in parallel. The output voltage of each supply...
Datasheet
LTC4350 on Analog.com
LTC1391
Production
The LTC1391 is a high performance CMOS 8-to-1 analog multiplexer. It features a serial digital interface that allows several LTC1391s to be daisy-chained...
Datasheet
LTC1391 on Analog.com
LT1809
Production
The LT1809/LT1810 are single/dual low distortion rail-to-rail input and output op amps with a 350V/µs slew rate. These amplifiers have a –3dB bandwidth...
Datasheet
LT1809 on Analog.com
LT1166
Production
The LT1166 is a bias generating system for controlling class AB output current in high powered amplifiers. When connected with external transistors, the...
Datasheet
LT1166 on Analog.com
LTC3704
Production
The LTC3704 is a wide input range, current mode, positive-to-negative DC/DC controller that drives an N-channel power MOSFET and requires very few external...
Datasheet
LTC3704 on Analog.com
LTC6953
Last Time Buy
The LTC6953 is a high performance, ultralow jitter, JESD204B/C clock distribution IC. The LTC6953’s eleven outputs can be configured as up to five JESD204B...
Datasheet
LTC6953 on Analog.com
LT1035
Obsolete
The LT1035 features two positive 5V regulators in the same package. The main regulator offers excellent performance while supplying load currents up to...
Datasheet
LT1035 on Analog.com
LTC3589
Recommended for New Designs
The LTC3589 is a complete power management solution for ARM and ARM-based processors and advanced portable microprocessor systems. The device contains...
Datasheet
LTC3589 on Analog.com
LTC1840
Production
The LTC1840 is a fan controller with two 8-bit current output DACs, two tachometer interfaces, and four general purpose I/O (GPIO) pins. It operates from...
Datasheet
LTC1840 on Analog.com
LT1526
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1526 is an improved general purpose switching regulator...
Datasheet
LT1526 on Analog.com
LTC1592
Production
The LTC1588/LTC1589/LTC1592 are serial input 12-/14-/16-bit multiplying current output DACs that operates from a single 5V supply. These SoftSpan™ DACs...
Datasheet
LTC1592 on Analog.com
LTC1318
Obsolete
THIS PRODUCT IS OBSOLETE: Contact Analog Devices for Potential Replacement
The LTC1318 is a single 5V, RS232/RS422 transceiver for connection to the DCE...
Datasheet
LTC1318 on Analog.com
LT3652
Production
The LT3652 is a complete monolithic step-down battery charger that operates over a 4.95V to 32V input voltage range. The LT3652 provides a constant-current...
Datasheet
LT3652 on Analog.com
LTC489
Production
The LTC488 and LTC489 are low power differential bus/line receivers designed for multipoint data transmission standard RS485 applications with extended...
Datasheet
LTC489 on Analog.com
LTM2881
Production
The LTM2881 is a complete galvanically isolated full-duplex RS485/RS422 μModule® (micromodule) transceiver. No external components are required. A single...
Datasheet
LTM2881 on Analog.com
LTC3528B-2
Recommended for New Designs
The LTC3528B-2 is a synchronous, ï¬xed frequency step-up DC/DC converter with output disconnect. High efficiency synchronous rectification, in addition...
Datasheet
LTC3528B-2 on Analog.com
LTM4604
Production
The LTM4604 is a complete 4A switch mode step-down µModule® (power module) regulator. Included in the package are the switching controller, power FETs...
Datasheet
LTM4604 on Analog.com
LTC1736
Production
The LTC1736 is a synchronous step-down switching regulator controller optimized for CPU power. The output voltage is programmed by a 5-bit digital-to-analog...
Datasheet
LTC1736 on Analog.com
LTC2622
Production
The LTC2602/LTC2612/LTC2622 are dual 16-,14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs, in a tiny 8-lead MSOP package. They have built...
Datasheet
LTC2622 on Analog.com
LTC1743
Production
The LTC1743 is a 50Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1743 on Analog.com
LT3024
Recommended for New Designs
The LT3024 is a dual, micropower, low noise, low dropout regulator. With an external 0.01µF bypass capacitor, output noise drops to 20µVRMS over a 10Hz...
Datasheet
LT3024 on Analog.com
LTC4215
Recommended for New Designs
The LTC4215/LTC4215-2 Hot Swapâ„¢ controllers allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor...
Datasheet
LTC4215 on Analog.com
LTC2327-16
Production
The LTC2327-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2327-16 on Analog.com
LTC3812-5
Production
The LTC3812-5 is a synchronous step-down switching regulator controller that can directly step down voltages from up to 60V input, making it ideal for...
Datasheet
LTC3812-5 on Analog.com
LT3667
Recommended for New Designs
The LT3667 is a monolithic triple power supply composed of a 400mA buck switching regulator and two 200mA low dropout linear regulators (LDOs).
The buck...
Datasheet
LT3667 on Analog.com
LTC4002
Production
The LTC4002 is a complete battery charger controller for one (4.2V) or two (8.4V) cell lithium-ion batteries. With a 500kHz switching frequency, the LTC4002...
Datasheet
LTC4002 on Analog.com
LT3508
Production
The LT3508 is a dual current mode PWM step-down DC/DC converter with internal power switches capable of generating two 1.4A outputs. The wide input voltage...
Datasheet
LT3508 on Analog.com
LTC6412
Recommended for New Designs
The LTC6412 is a fully differential variable gain amplifier with linear-in-dB analog gain control. It is designed for AC-coupled operation in IF receiver...
Datasheet
LTC6412 on Analog.com
LT1219
Last Time Buy
The LT1218/LT1219 are bipolar op amps which combine rail-to-rail input and output operation with precision specifications. Unlike other rail-to-rail amplifiers...
Datasheet
LT1219 on Analog.com
LT8622S
Recommended for New Designs
The LT®8622S/LT®8624S synchronous step-down regulator features third-generation Silent Switcher technology, which is uniquely designed to combine an...
Datasheet
LT8622S on Analog.com
LT8644S
Recommended for New Designs
The LT8644S synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI emissions while delivering...
Datasheet
LT8644S on Analog.com
LT3055
Recommended for New Designs
The LT3055 series are micropower, low noise, low dropout voltage (LDO) linear regulators. The devices supply 500mA of output current with a dropout voltage...
Datasheet
LT3055 on Analog.com
LT1305
Production
The LT1305 is a micropower step-up DC/DC converter that uses Burst Mode™ operation. Similar to the LT1303, the LT1305 features a 2A internal low-loss switch...
Datasheet
LT1305 on Analog.com
LT1508
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1508 is a complete solution for universal off-line switching...
Datasheet
LT1508 on Analog.com
LT6604-5
Recommended for New Designs
The LT6604-5 consists of two matched, fully differential amplifiers, each with a 4th order, 5MHz lowpass ?lter. The ?xed frequency lowpass ?lter approximates...
Datasheet
LT6604-5 on Analog.com
LTC1627
Production
The LTC1627 is a monolithic current mode synchronous buck regulator using a fixed frequency architecture. The operating supply range is from 8.5V down...
Datasheet
LTC1627 on Analog.com
LTC3901
Production
The LTC3901 is a secondary side synchronous rectifier driver designed to be used in isolated push-pull and full-bridge converter power supplies. The chip...
Datasheet
LTC3901 on Analog.com
LT5572
Production
The LT5572 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5572 on Analog.com
LTC2494
Production
The LTC2494 is a 16-channel (8-differential), 16-bit, No Latency ?S™ ADC with Easy Drive technology. The patented sampling scheme eliminates dynamic input...
Datasheet
LTC2494 on Analog.com
LTC2420
Production
The LTC2420 is a micropower 20-bit A/D converter with an integrated oscillator, 8ppm INL and 1.2ppm RMS noise that operates from 2.7V to 5.5V. It uses...
Datasheet
LTC2420 on Analog.com
LTC6432-15
Recommended for New Designs
The LTC6432-15 is an ultra-high dynamic range differentialgain block amplifier designed to drive high resolution,high speed ADCs. It offers a full GHz...
Datasheet
LTC6432-15 on Analog.com
LTC1666
Production
The LTC1666/LTC1667/LTC1668 are 12-/14-/16-bit, 50Msps differential current output DACs implemented on a high performance BiCMOS process with laser trimmed...
Datasheet
LTC1666 on Analog.com
LT1031
Production
The LT1031 is a precision 10V reference with ultralow drift and noise, extremely good long term stability, and almost total immunity to input voltage variations...
Datasheet
LT1031 on Analog.com
LTM4630A
Recommended for New Designs
The LTM4630A is a dual 18A or single 36A output switching
mode step-down DC/DC µModule® (micromodule)
regulator with wider VOUT range and higher efficiency...
Datasheet
LTM4630A on Analog.com
LTC3404
Production
The LTC3404 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC3404 on Analog.com
LT1014
Production
The LT1014 is the first precision quad operational amplifier which directly upgrades designs in the industry standard 14-pin DIP LM324/LM348/OP-11/4156...
Datasheet
LT1014 on Analog.com
LT8392
Recommended for New Designs
The LT8392 is a synchronous 4-switch buck-boost DC/ DC controller that regulates output voltage, input or output current from input voltage above, below...
Datasheet
LT8392 on Analog.com
LTC1061
Production
The LTC1061 consists of three high performance, universal filter building blocks. Each filter building block together with an external clock and 2 to 5...
Datasheet
LTC1061 on Analog.com
LTM4712
Recommended for New Designs
The LTM4712 is a high efficiency buck-boost μModule® (micromodule) regulator. The switching controller, power switches, inductor and support components...
LTM4712 on Analog.com
LTC2208
Production
The LTC2208 is a 130Msps, sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals up to input frequencies of 700MHz...
Datasheet
LTC2208 on Analog.com
LT6238
Recommended for New Designs
The LT6236/LT6237/LT6238 are single/dual/quad low noise, rail-to-rail output op amps that feature 1.1nV/vHz input referred noise voltage density and draw...
Datasheet
LT6238 on Analog.com
LTC2257-12
Production
The LTC2258-12/LTC2257-12/LTC2256-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2257-12 on Analog.com
LTC1100
Production
The LTC1100 is a high precision instrumentation amplifier using zero-drift techniques to achieve outstanding DC performance. The input DC offset is typically...
Datasheet
LTC1100 on Analog.com
LTC2067
Recommended for New Designs
The LTC2066/LTC2067/LTC2068 are single, dual, and quad low power, zero-drift, 100kHz amplifiers. The LTC2066/LTC2067/LTC2068 enable high resolution measurement...
Datasheet
LTC2067 on Analog.com
LTC3896
Recommended for New Designs
The LTC3896 is a high performance inverting DC/DC switching regulator controller that drives an all N-channel synchronous power MOSFET stage. It converts...
Datasheet
LTC3896 on Analog.com
LT1677
Production
The LT1677 features the lowest noise performance available for a rail-to-rail operational amplifier: 3.2nV/vHz wideband noise, 1/f corner frequency of...
Datasheet
LT1677 on Analog.com
LTC2486
Production
The LTC2486 is a 4-channel (2-channel differential), 16-bit, No Latency ?S™ ADC with Easy Drive™ technology. The patented sampling scheme eliminates dynamic...
Datasheet
LTC2486 on Analog.com
LTC6400-26
Last Time Buy
The LTC6400-26 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive...
LTC6400-26 on Analog.com
LT1761
Recommended for New Designs
The LT1761 series are micropower, low noise, low dropout regulators. With an external 0.01µF bypass capacitor, output noise drops to 20µVRMS over a 10Hz...
Datasheet
LT1761 on Analog.com
LT1939
Production
The LT1939 is a current mode PWM step-down DC/DC converter with an internal 2.3A switch. The wide input range of 3V to 25V makes the LT1939 suitable for...
Datasheet
LT1939 on Analog.com
LT1122
Production
The LT1122 JFET input operational amplifier combines high speed and precision performance.
A unique poly-gate JFET process minimizes gate series resistance...
Datasheet
LT1122 on Analog.com
LTC7541A
Production
The LTC7541A is a 12-bit resolution multiplying digital-to-analog converter (DAC).
Laser-trimmed thin-film resistors provide excellent absolute accuracy...
Datasheet
LTC7541A on Analog.com
LT1247
Production
The LT1246/LT1247 are 8-pin, fixed frequency, current mode, pulse width modulators. These devices are designed to be improved plug compatible versions...
Datasheet
LT1247 on Analog.com
LTC3212
Production
The LTC3212 is a low noise charge pump RGB LED driver capable of driving three LEDs up to 25mA each from a 2.7V to 5.5V input. Low external part count...
Datasheet
LTC3212 on Analog.com
LTC2323-16
Production
The LTC2323-16 is a low noise, high speed dual 16- bit successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2323-16 on Analog.com
LTC2338-18
Production
The LTC2338-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with fully differential inputs. Operating from a single 5V...
Datasheet
LTC2338-18 on Analog.com
LTC2353-18
Production
The LTC2353-18 is an 18-bit, low noise 2-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2353-18 on Analog.com
LT1355
Production
The LT1355/LT1356 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1355 on Analog.com
LTC6258
Last Time Buy
The LTC6258/LTC6259/LTC6260 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6258 on Analog.com
LT8303
Recommended for New Designs
The LT8303 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform...
Datasheet
LT8303 on Analog.com
LT1636
Production
The LT1636 op amp operates on all single and split supplies with a total voltage of 2.7V to 44V drawing less than 50µA of quiescent current. The LT1636...
Datasheet
LT1636 on Analog.com
LTC1049
Production
The LTC1049 is a high performance, low power zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other...
Datasheet
LTC1049 on Analog.com
LT6604-2.5
Recommended for New Designs
The LT6604-2.5 consists of two matched, fully differential amplifiers, each with a 4th order, 2.5MHz lowpass ?lter. The ?xed frequency lowpass ?lter approximates...
Datasheet
LT6604-2.5 on Analog.com
LTC3774
Recommended for New Designs
The LTC3774 is a dual PolyPhase® current mode synchronous step-down switching regulator controller that drives power blocks, DRMOS or external gate drivers...
Datasheet
LTC3774 on Analog.com
LTC6403-1
Recommended for New Designs
The LTC6403-1 is a precision, very low noise, low distortion, fully differential input/output amplifier optimized for 3V to 5V, single supply operation...
Datasheet
LTC6403-1 on Analog.com
LTC1263
Production
The LTC1263 is a regulated 12V, 60mA output DC/DC converter. It provides the 12V ±5% output necessary to program double byte-wide flash memories. The output...
Datasheet
LTC1263 on Analog.com
LT1204
Production
The LT1204 is a 4-input video multiplexer designed to drive 75? cables and easily expand into larger routing systems. Wide bandwidth, high slew rate, and...
Datasheet
LT1204 on Analog.com
LT8619
Recommended for New Designs
The LT8619 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 6μA of quiescent current...
Datasheet
LT8619 on Analog.com
LTC2358-18
Production
The LTC2358-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2358-18 on Analog.com
LTC3823
Production
The LTC3823 is a synchronous step-down switching regulator controller with true remote differential output sensing and output voltage up/down tracking...
Datasheet
LTC3823 on Analog.com
LT1207
Last Time Buy
The LT1207 is a dual version of the LT1206 high speed current feedback amplifier. Like the LT1206, each CFA in the dual has excellent video characteristics...
Datasheet
LT1207 on Analog.com
LTC1662
Production
The LTC1662 is an ultralow power, fully buffered voltage output, dual 10-bit digital-to-analog converter (DAC). Each DAC channel draws just 1.7µA (typ...
Datasheet
LTC1662 on Analog.com
LTC2374-16
Production
The LTC2374-16 is a low noise, high speed, 8-channel 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2374...
Datasheet
LTC2374-16 on Analog.com
LTC5536
Production
The LTC5536 is an RF power detector for RF applications operating in the 600MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5536 on Analog.com
LTC7801
Recommended for New Designs
The LTC7801 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage that can operate...
Datasheet
LTC7801 on Analog.com
LTC2345-18
Production
The LTC2345-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode...
Datasheet
LTC2345-18 on Analog.com
LTC4000-1
Recommended for New Designs
The LTC4000-1 is a high voltage, high performance controller that converts many externally compensated DC/DC power supplies into full-featured battery...
Datasheet
LTC4000-1 on Analog.com
LTC6087
Recommended for New Designs
The LTC6087/LTC6088 are dual/quad, low noise, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifiers that feature 1pA of...
Datasheet
LTC6087 on Analog.com
LTC5566
Production
The LTC5566 dual programmable gain downconverting mixer is ideal for diversity and MIMO receivers that require precise gain setting. Each channel incorporates...
Datasheet
LTC5566 on Analog.com
LTC2625
Production
The LTC2605/LTC2615/LTC2625 are octal 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP packages. They have built...
Datasheet
LTC2625 on Analog.com
LTC2182
Production
The LTC2182/LTC2181/LTC2180 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2182 on Analog.com
LTC4558
Production
The LTC4558 provides the power conversion and signal level translation needed for advanced cellular telephones to interface with 1.8V or 3V subscriber...
LTC4558 on Analog.com
LTM4646
Recommended for New Designs
The LTM4646 is a complete dual 10A output switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductors...
Datasheet
LTM4646 on Analog.com
LT8570
Recommended for New Designs
The LT8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch....
Datasheet
LT8570 on Analog.com
LTC7004
Recommended for New Designs
The LTC7004 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 60V. It contains an internal charge pump that fully...
Datasheet
LTC7004 on Analog.com
LTC2173-14
Production
The LTC2175-14/LTC2174-14/LTC2173-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2173-14 on Analog.com
LT3689
Production
The LT3689 is an adjustable frequency (350kHz to 2.2MHz) monolithic step-down switching regulator with a power-on reset and watchdog timer. The regulator...
Datasheet
LT3689 on Analog.com
LT1179
Production
The LT1178 is a micropower dual op amp in the standard 8-pin configuration; the LT1179 is a micropower quad op amp offered in the standard 14-pin packages...
Datasheet
LT1179 on Analog.com
LT1413
Production
The LT1413 is a low cost, upgraded version of Analog Technology’s industry standard LT1013 dual, single supply op amp. The LT1413 is optimized for single...
Datasheet
LT1413 on Analog.com
LTC3523
Recommended for New Designs
The LTC3523/LTC3523-2 combine a 600mA step-up DC/DC converter with a 400mA synchronous step-down DC/DC converter in a tiny 3mm × 3mm package. The 1.2MHz...
Datasheet
LTC3523 on Analog.com
LT1352
Production
The LT1352/LT1353 are dual and quad, very low power, high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much...
Datasheet
LT1352 on Analog.com
LT6204
Production
The LT6202/LT6203/LT6204 are single/dual/quad low noise, rail-to-rail input and output unity gain stable op amps that feature 1.9nV/vHz noise voltage and...
Datasheet
LT6204 on Analog.com
LTC3634
Production
The LTC3634 is a high efficiency, dual-channel monolithic synchronous step-down regulator which provides power supply and bus termination rails for DDR1...
Datasheet
LTC3634 on Analog.com
LTC1043
Production
The LTC1043 is a monolithic, charge-balanced, dual switched capacitor instrumentation building block. A pair of switches alternately connects an external...
Datasheet
LTC1043 on Analog.com
LTC6401-20
Last Time Buy
The LTC6401-20 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive...
LTC6401-20 on Analog.com
LTC2756
Production
The LTC2756 is an 18-bit multiplying serial-input, current-output digital-to-analog converter. LTC2756A provides full 18-bit performance—INL and DNL of...
Datasheet
LTC2756 on Analog.com
LTM9004
Not Recommended for New Designs
The LTM9004 is a 14-bit direct conversion receiver subsystem. Utilizing an integrated system in a package (SiP) technology, the LTM9004 is a µModule® receiver...
Datasheet
LTM9004 on Analog.com
LTC4061
Production
The LTC4061 is a full-featured, flexible, standalone linear charger for single-cell Lithium-Ion batteries. It is capable of operating within USB power...
Datasheet
LTC4061 on Analog.com
LT8685S
Recommended for New Designs
The LT8685S is a highly flexible, four channel, current mode, monolithic regulator able to power a wide range of automotive and industrial applications...
Datasheet
LT8685S on Analog.com
LT6010
Production
The LT6010 op amp combines low noise and high precision input performance with low power consumption and rail-to-rail output swing.
Input offset voltage...
Datasheet
LT6010 on Analog.com
LTC7841
Recommended for New Designs
The LTC®7841 is a high performance dual phase single output synchronous boost
converter controller that drives two N-channel power MOSFET stages
out...
Datasheet
LTC7841 on Analog.com
LTC3255
Recommended for New Designs
The LTC3255 is a switched-capacitor step-down DC/DC converter that produces a regulated output (2.4V to 12.5V adjustable) from a 4V to 48V input. In applications...
Datasheet
LTC3255 on Analog.com
LTC2295
Production
The LTC2295 is a 14-bit 10Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2295 is perfect...
Datasheet
LTC2295 on Analog.com
LT3964-1
Recommended for New Designs
The LT3964-1 is a dual synchronous step-down DC/ DC
converter with an I2C interface designed to operate as a
constant-current and constant-voltage source...
LT3964-1 on Analog.com
LTC4085-3
Recommended for New Designs
The LTC4085-3/LTC4085-4 is a USB power manager and Li-Ion/Polymer battery charger designed for portable battery-powered applications. The part controls...
Datasheet
LTC4085-3 on Analog.com
LTC1435
Production
The LTC1435 is a synchronous step-down switching regulator controller that drives external N-channel power MOSFETs using a fixed frequency architecture...
Datasheet
LTC1435 on Analog.com
LT8580
Recommended for New Designs
The LT8580 is a PWM DC/DC converter containing an internal 1A, 65V switch. The LT8580 can be configured as either a boost, SEPIC or inverting converter...
Datasheet
LT8580 on Analog.com
LT118A
Obsolete
OBSOLETE PRODUCT Data Sheet For Reference Only
The LT118A is an improved version of the industry standard LM118. The LT118A features lower input offset...
Datasheet
LT118A on Analog.com
LT1228
Production
The LT1228 makes it easy to electronically control the gain of signals from DC to video frequencies. The LT1228 implements gain control with a transconductance...
Datasheet
LT1228 on Analog.com
LTC3563
Production
The LTC3563 is a high efficiency monolithic synchronous buck converter using a constant frequency, current mode architecture. A voltage select input allows...
Datasheet
LTC3563 on Analog.com
LTC1290
Production
The LTC1290 is a data acquisition component which contains a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor technology...
Datasheet
LTC1290 on Analog.com
LTC3894
Recommended for New Designs
The LTC3894 is a high voltage step-down DC/DC switching regulator controller. It drives a P-channel power MOSFET switch allowing 100% duty cycle operation...
Datasheet
LTC3894 on Analog.com
LTC1873
Production
The LTC1873 is a dual switching regulator controller optimized for high efficiency with low input voltages. It includes two complete, on-chip, independent...
Datasheet
LTC1873 on Analog.com
LTC1705
Production
The LTC1705 is a complete power supply controller for Intel Mobile Pentium processors. It includes two switching regulator controllers, each designed to...
Datasheet
LTC1705 on Analog.com
LTC1735
Production
The LTC1735 is a synchronous step-down switching regulator controller that drives external N-channel power MOSFETs using a fixed frequency architecture...
Datasheet
LTC1735 on Analog.com
LTC2224
Production
The LTC2224 is a 135Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2224 is perfect for...
Datasheet
LTC2224 on Analog.com
LT1121
Production
The LT1121/LT1121-3.3/LT1121-5 are micropower low dropout regulators with shutdown. These devices are capable of supplying 150mA of output current with...
Datasheet
LT1121 on Analog.com
LTC1799
Production
The LTC1799 is a precision oscillator that is easy to use and occupies very little PC board space. The oscillator frequency is programmed by a single external...
Datasheet
LTC1799 on Analog.com
LTC2963
Recommended for New Designs
The LTC2962 series of configurable power supply monitors
can supervise systems with up to four supply voltages.
One of 16 preset or adjustable voltage...
Datasheet
LTC2963 on Analog.com
LTC2171-12
Production
The LTC2172-12/LTC2171-12/LTC2170-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2171-12 on Analog.com
LTC4013
Recommended for New Designs
The LTC4013 is a high voltage battery charger that is well suited for charging a wide range of lead-acid batteries including both vented and sealed types...
Datasheet
LTC4013 on Analog.com
LTC2642
Production
The LTC2641/LTC2642 are families of 16-, 14- and 12-bit unbuffered voltage output DACs. These DACs operate from a single 2.7V to 5.5V supply and are guaranteed...
Datasheet
LTC2642 on Analog.com
LTC6262
Last Time Buy
The LTC6261/LTC6262/LTC6263 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6262 on Analog.com
LT5538
Production
The LT5538 is a 40MHz to 3800MHz monolithic logarithmic RF power detector, capable of measuring RF signals over a wide dynamic range, from –75dBm to 10dBm...
Datasheet
LT5538 on Analog.com
LT1398
Last Time Buy
The LT1399 and LT1399HV contain three independent 300MHz current feedback amplifiers, each with a shutdown pin. The LT1399HV is a higher voltage version...
Datasheet
LT1398 on Analog.com
LTM4642
Recommended for New Designs
The LTM4642 is a complete dual 4A or single 8A step-down DC/DC µModule® (micromodule) regulator. Included in the package are the switching controller,...
Datasheet
LTM4642 on Analog.com
LT1463
Last Time Buy
The LT1462 (dual) and LT1463 (quad) are the first micropower op amps (45µA max per amp) to offer picoampere input bias currents (1pA typ) and unity gain...
Datasheet
LT1463 on Analog.com
LT1813
Production
The LT1813/LT1814 are dual and quad, low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1813/LT1814...
Datasheet
LT1813 on Analog.com
LTC2386-18
Production
The LTC2386-18 is a low noise, high speed, 18-bit 10Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2386-18 on Analog.com
LTC3851
Production
The LTC3851 is a high performance synchronous step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A constant...
Datasheet
LTC3851 on Analog.com
LT1991
Production
The LT1991 combines a precision operational amplifier with eight precision resistors to form a one-chip solution for accurately amplifying voltages. Gains...
Datasheet
LT1991 on Analog.com
LT3065
Recommended for New Designs
The LT3065 Series are micropower, low noise, low dropout voltage (LDO) linear regulators that operate over a 1.6V to 45V input voltage range. The devices...
Datasheet
LT3065 on Analog.com
LTC3612
Production
The LTC3612 is a low quiescent current monolithic synchronous buck regulator using a current mode, constant frequency architecture. The no-load DC supply...
Datasheet
LTC3612 on Analog.com
LTC3555
Production
The LTC3555 family are highly integrated USB compatible power management and battery charger ICs for Li-Ion/Polymer battery applications. They include...
Datasheet
LTC3555 on Analog.com
LTC3409A
Production
The LTC3409A is a high efficiency, monolithic synchronous buck regulator using a constant frequency, current mode architecture. The LTC3409A improves upon...
Datasheet
LTC3409A on Analog.com
LT3509
Production
The LT3509 is a dual, current mode, step-down switching regulator, with internal power switches each capable of providing 700mA output current. This regulator...
Datasheet
LT3509 on Analog.com
LT1252
Production
The LT1252 is a low cost current feedback amplifier for video applications. The LT1252 is ideal for driving low impedance loads such as cables and filters...
Datasheet
LT1252 on Analog.com
LTC2482
Production
The LTC2482 combines a 16-bit plus sign No Latency ?S™ analog-to-digital converter with patented Easy Drive technology. The patented sampling scheme eliminates...
Datasheet
LTC2482 on Analog.com
LTC4079
Recommended for New Designs
The LTC4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, LiFePO4, Lead-Acid or NiMH...
Datasheet
LTC4079 on Analog.com
LT3010
Recommended for New Designs
The LT3010 is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 50mA output current with a dropout voltage of...
Datasheet
LT3010 on Analog.com
LTC2635
Production
The LTC2635 is a family of quad 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift reference in a 16-pin QFN or a 10...
Datasheet
LTC2635 on Analog.com
LT3999
Production
The LT3999 is a monolithic, high voltage, high frequency DC/DC transformer driver providing isolated power in a small solution footprint.
The LT3999 has...
Datasheet
LT3999 on Analog.com
LT1215
Production
The LT1215 is a dual, single supply precision op amp with a 23MHz gain-bandwidth product and a 50V/µs slew rate. The LT1216 is a quad version of the same...
Datasheet
LT1215 on Analog.com
LTC1346A
Production
The LTC1346A is a single chip transceiver that provides the differential clock and data signals for a V.35 interface from ±5V supplies. Combined with an...
Datasheet
LTC1346A on Analog.com
LT8204
Recommended for New Designs
The LT8204 is a 40V full-bridge or dual half-bridge controller. It can be configured as either a four-switch full-bridge controller or dual two-switch...
LT8204 on Analog.com
LTC3309B
Recommended for New Designs
The LTC3309B is a very small, high efficiency, low noise, monolithic synchronous 6A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3309B on Analog.com
LT6557
Not Recommended for New Designs
The LT6557 is a high speed triple video ampli?er with an internal ?xed gain of 2 and a programmable DC input bias voltage. This ampli?er features a 400MHz...
Datasheet
LT6557 on Analog.com
LTC3886
Recommended for New Designs
The LTC3886/LTC3886-1 is a dual PolyPhase DC/DC synchronous step-down switching regulator controller with I2C-based PMBus compliant serial interface. This...
Datasheet
LTC3886 on Analog.com
LT6206
Production
The LT6205/LT6206/LT6207 are low cost single/dual/quad voltage feedback amplifiers that feature 100MHz gain-bandwidth product, 450V/µs slew rate and 50mA...
Datasheet
LT6206 on Analog.com
LTC2418
Production
The LTC2414/LTC2418 are 8-/16-channel (4-/8-differential) micropower 24-bit ?S analog-to-digital converters. They operate from 2.7V to 5.5V and include...
Datasheet
LTC2418 on Analog.com
LT3040
Recommended for New Designs
The LT3040 is a high performance, robust Voltage Output Reference/DAC buffer that employs a unique architecture that seeks to maintain the precision and...
Datasheet
LT3040 on Analog.com
LTC3208
Production
The LTC3208 is a highly integrated multidisplay LED controller. The part contains a 1A high ef? ciency, low noise charge pump to provide power to the MAIN...
Datasheet
LTC3208 on Analog.com
LTM4705
Recommended for New Designs
The LTM4705 is a complete dual 5A step-down switching mode μModule® (micromodule) regulator in a tiny 6.25mm × 7.5mm × 3.22mm BGA package. Included...
Datasheet
LTM4705 on Analog.com
LT3487
Production
The LT3487 dual channel switching regulator generates positive and negative outputs for biasing CCD imagers. The device delivers up to –8V at 90mA and...
Datasheet
LT3487 on Analog.com
LT8708
Recommended for New Designs
The LT8708 is a high performance buck-boost switching regulator controller that operates from an input voltage that can be above, below or equal to the...
Datasheet
LT8708 on Analog.com
LTC3304
Recommended for New Designs
The LTC3304 is a very small, high efficiency, low noise, monolithic synchronous 6A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3304 on Analog.com
LTM4633
Recommended for New Designs
The LTM4633 µModule® (power module) regulator combines three complete 10A switching mode DC/DC converters into one small package. Included in the package...
Datasheet
LTM4633 on Analog.com
LTC1531
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1531 is an isolated self-powered dual differential comparator...
Datasheet
LTC1531 on Analog.com
LTC491
Production
The LTC491 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common...
Datasheet
LTC491 on Analog.com
LT1501
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1500 is an adaptive-frequency current mode step-up switching...
Datasheet
LT1501 on Analog.com
LT6402-12
Recommended for New Designs
The LT6402-12 is a low distortion, low noise differential ampli?er/ADC driver for use in applications from DC to 300MHz. The LT6402-12 has been designed...
Datasheet
LT6402-12 on Analog.com
LTC3428
Recommended for New Designs
The LTC3428 is a 2-phase, current mode boost converter, capable of supplying 2A at 5V from a 3.3V input. Two 93m?, 2A N-channel MOSFET switches allow the...
Datasheet
LTC3428 on Analog.com
LTC4063
Production
The LTC4063 is a standalone linear charger for single cell lithium-ion batteries with an adjustable low dropout linear regulator (LDO). The adjustable...
Datasheet
LTC4063 on Analog.com
LTC4059
Production
The LTC4059/LTC4059A are constant-current/constant-voltage linear chargers for single cell lithium-ion batteries. Their 2mm × 2mm DFN package and low external...
Datasheet
LTC4059 on Analog.com
LTC2368-18
Production
The LTC2368-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2368-18 has...
Datasheet
LTC2368-18 on Analog.com
LTM4691
Recommended for New Designs
The LTM4691 is a complete dual 2A output switching mode DC/DC power supply in a tiny 3mm × 4mm × 1.18mm LGA package and a 3mm × 4mm × 1.48mm BGA package...
Datasheet
LTM4691 on Analog.com
LTC2481
Production
The LTC2481 combines a 16-bit plus sign No Latency ?S™ analog-to-digital converter with patented Easy Drive technology and I2C digital interface. The patented...
Datasheet
LTC2481 on Analog.com
LT5517
Production
The LT5517 is a 40MHz to 900MHz quadrature demodulator optimized for high linearity receiver applications where high dynamic range is important. It is...
Datasheet
LT5517 on Analog.com
LT3482
Production
The LT3482 is a fixed frequency current mode step-up DC/DC converter with voltage doubler designed to bias avalanche photodiodes (APDs) in optical receivers...
Datasheet
LT3482 on Analog.com
LTC2387-18
Production
The LTC2387-18 is a low noise, high speed, 18-bit 15Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2387-18 on Analog.com
LT1225
Last Time Buy
The LT1225 is a very high speed operational amplifier with excellent DC performance. The LT1225 features reduced input offset voltage and higher DC gain...
Datasheet
LT1225 on Analog.com
LTC3547
Production
The LTC3547 is a dual, 2.25MHz, constant-frequency, synchronous step-down DC/DC converter in a tiny 3mm × 2mm DFN package. 100% duty cycle provides low...
Datasheet
LTC3547 on Analog.com
LTC2348-16
Production
The LTC2348-16 is a 16-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range...
Datasheet
LTC2348-16 on Analog.com
LTC3127
Recommended for New Designs
The LTC3127 is a wide VIN range, highly efficient, 1.35MHz fixed frequency buck-boost DC/DC converter that operates from input voltages above, below or...
Datasheet
LTC3127 on Analog.com
LT8740
Recommended for New Designs
The LT8740 is a two-channel programmable device power supply (DPS) with very high efficiency, integration, and performance. The part consists of two switching...
Datasheet
LT8740 on Analog.com
LTC3780
Production
The LTC3780 is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3780 on Analog.com
LT8301
Recommended for New Designs
The LT8301 is a micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part...
Datasheet
LT8301 on Analog.com
LT6231
Production
The LT6230/LT6231/LT6232 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.1nV/vHz noise voltage and draw only...
Datasheet
LT6231 on Analog.com
LTC4367
Recommended for New Designs
The LTC4367 protects applications where power supply input voltages may be too high, too low or even negative. It does this by controlling the gate voltages...
Datasheet
LTC4367 on Analog.com
LTC1477
Production
The LTC1477/LTC1478 protected high side switches provide extremely low RDS(ON) switching with built-in protection against short-circuit and thermal overload...
Datasheet
LTC1477 on Analog.com
LT8390A
Recommended for New Designs
The LT8390A is a synchronous 4-switch buck-boost DC/DC controller that regulates output voltage, input or output current from an input voltage above, below...
Datasheet
LT8390A on Analog.com
LTC1851
Production
The 10-bit LTC1850 and 12-bit LTC1851 are complete 8-channel data acquisition systems. They include a flexible 8-channel multiplexer, a 1.25Msps successive...
Datasheet
LTC1851 on Analog.com
LTC3376
Recommended for New Designs
The LTC3376 is a highly flexible multioutput power supply IC. The device includes four synchronous buck converters, configured to share eight 1.5A power...
Datasheet
LTC3376 on Analog.com
LT5526
Production
The LT5526 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, cable infrastructure and...
Datasheet
LT5526 on Analog.com
LT1913
Production
The LT1913 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 25V. A high efficiency 95mO...
Datasheet
LT1913 on Analog.com
LT1782
Production
The LT1782 is a 200kHz op amp available in the small SOT-23 package that operates on all single and split supplies with a total voltage of 2.5V to 18V...
Datasheet
LT1782 on Analog.com
LT6411
Recommended for New Designs
The LT6411 is a dual amplifier with individually selectable gains of +1, +2 and –1. The amplifiers have excellent distortion performance for driving ADCs...
Datasheet
LT6411 on Analog.com
LT6003
Recommended for New Designs
The LT6003/LT6004/LT6005 are single/dual/quad op amps designed to maximize battery life and performance for portable applications. These amplifiers operate...
Datasheet
LT6003 on Analog.com
LT3680
Production
The LT3680 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 95mÎ...
Datasheet
LT3680 on Analog.com
LTC1955
Production
The LTC1955 provides all necessary supervisory and power control functions for two smart cards, two S.A.M. cards or a combination of S.A.M. and smart cards...
Datasheet
LTC1955 on Analog.com
LTC2672
Recommended for New Designs
The LTC2672 is a family of five-channel, 12-/16-bit current source, digital-to-analog converters (DACs) that provide five high compliance, current source...
Datasheet
LTC2672 on Analog.com
LTC2252
Production
The LTC2253/LTC2252 are 12-bit 125Msps/105Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2253...
Datasheet
LTC2252 on Analog.com
LT1256
Production
The LT1251/LT1256 are 2-input, 1-output, 40MHz current feedback amplifiers with a linear control circuit that sets the amount each input contributes to...
Datasheet
LT1256 on Analog.com
LTC6601-2
Last Time Buy
The LTC6601-2 is a low power, low distortion, very easy-to-use fully differential 2nd order active broadband RC ï¬lter and driver. On-chip resistors,...
LTC6601-2 on Analog.com
LT8637
Recommended for New Designs
The LT8636/LT8637 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency...
Datasheet
LT8637 on Analog.com
LTM4670
Recommended for New Designs
The LTM4670 is a quad DC/DC step-down μModule® (micromodule) regulator with 10A per output. Outputs can be paralleled in an array for up to 40A capability...
Datasheet
LTM4670 on Analog.com
LT1019
Production
The LT1019 is a third generation bandgap voltage reference utilizing thin film technology and a greatly improved curvature correction technique. Wafer...
Datasheet
LT1019 on Analog.com
LTC3539
Recommended for New Designs
The LTC3539/LTC3539-2 are synchronous, 2A step-up DC/DC converters with output disconnect. Synchronous rectification enables high efficiency in the low...
Datasheet
LTC3539 on Analog.com
LTC2326-16
Production
The LTC2326-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2326-16 on Analog.com
LT3461
Production
The LT3461/LT3461A are general purpose fixed frequency current mode step-up DC/DC converters. Both devices feature an integrated Schottky and a low VCESAT...
Datasheet
LT3461 on Analog.com
LTC4292
Recommended for New Designs
The LTC4292/LTC4291 chipset is a 4-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3bt Type 3 and 4 compliant Power over Ethernet...
Datasheet
LTC4292 on Analog.com
LTM4676A
Recommended for New Designs
The LTM4676A is a dual 13A or single 26A step-down µModule® (micromodule) DC/DC regulator with 40ms turn-on time. It features remote configurability...
Datasheet
LTM4676A on Analog.com
LTC3544B
Production
The LTC3544B is a quad, high efficiency, monolithic synchronous buck regulator using a constant frequency, current mode architecture. The four regulators...
Datasheet
LTC3544B on Analog.com
LTC2602
Production
The LTC2602/LTC2612/LTC2622 are dual 16-,14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs, in a tiny 8-lead MSOP package. They have built...
Datasheet
LTC2602 on Analog.com
LTC7880
Recommended for New Designs
The LTC7880 is a dual PolyPhase® DC/DC synchronous step-up switching regulator controller with I2C-based PMBus compliant serial interface. This controller...
Datasheet
LTC7880 on Analog.com
LT1357
Production
The LT1357 is a high speed, very high slew rate operational amplifier with outstanding AC and DC performance. The LT1357 has much lower supply current...
Datasheet
LT1357 on Analog.com
LTC1707
Production
The LTC1707 is a high efficiency monolithic current mode synchronous buck regulator using a fixed frequency architecture. The operating supply range is...
Datasheet
LTC1707 on Analog.com
LTC7818
Recommended for New Designs
The LTC7818 is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET...
Datasheet
LTC7818 on Analog.com
LTC3716
Production
The LTC3716 is a 2-phase, VID programmable, synchronous step-down switching regulator controller that drives two N-channel external power MOSFET stages...
Datasheet
LTC3716 on Analog.com
LTC3786
Production
The LTC3786 is a high performance synchronous boost converter controller that drives all N-channel power MOSFETs. Synchronous rectification increases efficiency...
Datasheet
LTC3786 on Analog.com
LTC2473
Production
The LTC2471/LTC2473 are small, 16-bit analog-to-digital converters with an integrated precision reference and a selectable 208sps or 833sps output rate...
Datasheet
LTC2473 on Analog.com
LTC6263
Last Time Buy
The LTC6261/LTC6262/LTC6263 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6263 on Analog.com
LTC6754
Recommended for New Designs
The LTC6754 is a high speed rail-to-rail comparator with LVDS compatible outputs. The LTC6754 exhibits 1.8ns of propagation delay, only 1ns of dispersion...
Datasheet
LTC6754 on Analog.com
LT4256-1
Recommended for New Designs
The LT4256-1/LT4256-2 are high voltage Hot Swap™ controllers that allow a board to be safely inserted and removed from a live backplane. An internal driver...
Datasheet
LT4256-1 on Analog.com
LTM4686
Recommended for New Designs
The LTM4686 is a dual 10A (12A Peak) or single 20A (24A Peak) step-down µModule® (micromodule) DC/DC regulator with 39ms turn-on time. It features remote...
LTM4686 on Analog.com
LT8631
Recommended for New Designs
The LT8631 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 1A. The wide...
Datasheet
LT8631 on Analog.com
LT1620
Production
The LT1620 simplifies the design of high performance, controlled current battery charging circuits when used in conjunction with a current mode PWM controller...
Datasheet
LT1620 on Analog.com
LTC4268-1
Production
The LTC4268-1 is an integrated Powered Device (PD) controller and switching regulator intended for IEEE 802.3af and high power PoE applications up to 35W...
Datasheet
LTC4268-1 on Analog.com
LTC2952
Recommended for New Designs
The LTC2952 is a power management device that features three main functions: pushbutton on/off control of system power, ideal diode PowerPath™ controllers...
Datasheet
LTC2952 on Analog.com
LTC3407-3
Production
The LTC3407-3 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 3.3V to 5.5V...
Datasheet
LTC3407-3 on Analog.com
LTC3897-2
Recommended for New Designs
The LTC3897-2 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller.
The boost controller drives two N-channel power MOSFET...
Datasheet
LTC3897-2 on Analog.com
LT3710
Production
The LT3710 is a high efficiency step-down switching regulator intended for auxiliary outputs in single secondary winding, multiple output power supplies...
Datasheet
LT3710 on Analog.com
LTC1515
Production
The LTC1515, LTC1515-3/5 and LTC1515-3.3/5 are micropower switched capacitor DC/DC converters that produce a regulated output voltage by either stepping...
Datasheet
LTC1515 on Analog.com
LTC1574
Obsolete
The LTC1574 is a family of easy-to-use current mode DC/DC converters ideally suited for 9V to 5V, 5V to 3.3V and inverting operation. With an internal...
Datasheet
LTC1574 on Analog.com
LTC4229
Recommended for New Designs
The LTC4229 offers ideal diode and Hot Swap™ functions for a power rail by controlling two external N-channel MOSFETs. The MOSFET acting as an ideal diode...
Datasheet
LTC4229 on Analog.com
LTC2293
Production
The LTC2293/LTC2292/LTC2291 are 12-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2293 on Analog.com
LT3688
Production
The LT3688 is an adjustable frequency (350kHz to 2.2MHz) dual monolithic step-down switching regulator with two power-on reset timers and a watchdog timer...
Datasheet
LT3688 on Analog.com
LTC2294
Production
The LTC2294 is a 12-bit 80Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2294 is perfect...
Datasheet
LTC2294 on Analog.com
LT2179
Production
The LT2178 is a micropower dual op amp in a surface mount standard 8-pin configuration, the LT2179 is a micropower quad op amp offered in a surface mount...
Datasheet
LT2179 on Analog.com
LTC2907
Production
The LTC2906/LTC2907 are dual supply monitors intended for systems with multiple supply voltages. The dual supply monitors have a common reset output with...
Datasheet
LTC2907 on Analog.com
LTC3855
Production
The LTC3855 is a dual PolyPhase® current mode synchronous step-down switching regulator controller that drives all N-channel power MOSFET stages. It includes...
Datasheet
LTC3855 on Analog.com
LT6015
Recommended for New Designs
The LT6015/LT6016/LT6017 are single/dual/quad rail-to-rail input operational amplifiers with input offset voltage trimmed to less than 50µV. These amplifiers...
Datasheet
LT6015 on Analog.com
LTC5552
Recommended for New Designs
The LTC5552 is a high performance, microwave double balanced passive mixer that can be used for frequency upconversion or downconversion. The device is...
Datasheet
LTC5552 on Analog.com
LTC3290
Recommended for New Designs
The LTC3290 is a high voltage boost charge pump with a wide 4.5V to 55V input voltage range that can deliver up to 50mA of output current.
When the VSET...
Datasheet
LTC3290 on Analog.com
LTC1403A-1
Production
The LTC1403-1/LTC1403A-1 are 12-bit/14-bit, 2.8Msps serial ADCs with differential inputs. The devices draw only 4.7mA from a single 3V supply and come...
Datasheet
LTC1403A-1 on Analog.com
LTC6950
Last Time Buy
The LTC6950 is a low phase noise integer-N frequency synthesizer core with clock distribution. The LTC6950 delivers the low phase noise clock signals demanded...
Datasheet
LTC6950 on Analog.com
LTC3100
Production
The LTC3100 combines a high efficiency 700mA synchronous step-up converter, a 250mA synchronous stepdown converter and a 100mA LDO regulator. The LTC3100...
Datasheet
LTC3100 on Analog.com
LTM4660
Recommended for New Designs
The LTM4660 is a complete 300W output switching mode hybrid-topology step-down DC/DC μModule® (micromodule) nonisolated bus converter. Its exposed power...
Datasheet
LTM4660 on Analog.com
LTC1841
Production
The LTC1841 is an ultralow power dual comparator featuring less than 5.7µA supply current over temperature, a 1.182V ±1% reference, programmable hysteresis...
Datasheet
LTC1841 on Analog.com
LTC3528-2
Recommended for New Designs
The LTC3528-2 is a synchronous, fixed frequency step-up DC/DC converter with output disconnect. High efficiency synchronous rectification, in addition...
Datasheet
LTC3528-2 on Analog.com
LT3495
Production
The LT3495/LT3495B/LT3495-1/LT3495B-1 are low noise boost converters with integrated power switch, feedback resistor and output disconnect circuitry. The...
Datasheet
LT3495 on Analog.com
LTC1177
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1177-5/LTC1177-12 are isolated high side MOSFET drivers...
Datasheet
LTC1177 on Analog.com
LTM8042
Production
The LTM8042 is a complete μModule® (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA...
Datasheet
LTM8042 on Analog.com
LTC3588-2
Recommended for New Designs
The LTC3588-2 integrates a low-loss full-wave bridge rectifier with a high efficiency buck converter to form a complete energy harvesting solution optimized...
Datasheet
LTC3588-2 on Analog.com
LTC6804-2
Production
The LTC6804 is a 3rd generation multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of...
Datasheet
LTC6804-2 on Analog.com
LTC4410
Production
The LTC4410 enables simultaneous battery charging and operation of portable USB 1.0 and 2.0 compliant devices while they are connected to a USB port. As...
Datasheet
LTC4410 on Analog.com
LT8615
Recommended for New Designs
The LT8615 is a compact, high efficiency, high speed
synchronous monolithic step-down switching regulator
that can deliver 3.5A of continuous current....
Datasheet
LT8615 on Analog.com
LTC2953
Recommended for New Designs
The LTC2953 is a push button On/Off controller that manages system power via a push button interface. An enable output toggles system power while an interrupt...
Datasheet
LTC2953 on Analog.com
LTC3417A-2
Production
The LTC3417A-2 is a dual constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.25V to...
Datasheet
LTC3417A-2 on Analog.com
LTC1750
Production
The LTC1750 is an 80Msps, 14-bit A/D converter designed for digitizing wide dynamic range signals up to frequencies of 500MHz. The input range of the ADC...
Datasheet
LTC1750 on Analog.com
LTC3405A-1.375
Production
The LTC3405A-1.375 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during...
Datasheet
LTC3405A-1.375 on Analog.com
LTC1871-1
Production
The LTC1871-1 is a wide input range, current mode, boost, flyback or SEPIC controller that drives an Nchannel power MOSFET and requires very few external...
Datasheet
LTC1871-1 on Analog.com
LTC2325-12
Production
The LTC2325-12 is a low noise, high speed quad 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2325-12 on Analog.com
LTC1623
Production
The LTC1623 SMBus switch controller is a slave device that controls two high-side N-channel MOSFETs on either the SMBus or the I2C bus. The LTC1623 operates...
Datasheet
LTC1623 on Analog.com
LTC4555
Production
The LTC4555 provides power conversion and signal level shifting needed for low voltage 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber...
LTC4555 on Analog.com
LTC7805
Recommended for New Designs
The LTC7805 is a high performance dual step-down synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET stages. Constant...
Datasheet
LTC7805 on Analog.com
LTC1850
Production
The 10-bit LTC1850 and 12-bit LTC1851 are complete 8-channel data acquisition systems. They include a flexible 8-channel multiplexer, a 1.25Msps successive...
Datasheet
LTC1850 on Analog.com
LTM4693
Recommended for New Designs
The LTM4693 is an ultrathin, highly efficient, 2A buck-boost μModule® DC/DC converter that operates from input voltages above, below or equal to the...
Datasheet
LTM4693 on Analog.com
LTC1403-1
Production
The LTC1403-1/LTC1403A-1 are 12-bit/14-bit, 2.8Msps serial ADCs with differential inputs. The devices draw only 4.7mA from a single 3V supply and come...
Datasheet
LTC1403-1 on Analog.com
LTM2886
Production
The LTM2886 is a complete galvanic digital µModule® (micromodule) isolator. No external components are required. A single 3.3V or 5V supply powers both...
Datasheet
LTM2886 on Analog.com
LT1943
Production
The LT1943 quad output adjustable switching regulator provides power for large TFT LCD panels. The device, housed in a low profile 28 pin thermally enhanced...
Datasheet
LT1943 on Analog.com
LTC1871X
Recommended for New Designs
LTC1871X is a wide input range, current mode, boost, flyback or SEPIC controller that drives an N-channel power MOSFET. LTC1871X is rated to 175°C junction...
Datasheet
LTC1871X on Analog.com
LTC2844
Production
The LTC2844 is a 4-driver/4-receiver multiprotocol transceiver. The LTC2844 and LTC2846 form the core of a complete software-selectable DTE or DCE interface...
Datasheet
LTC2844 on Analog.com
LTC2400
Production
The LTC2400 is a 2.7V to 5.5V micropower 24-bit converter with an integrated oscillator, 4ppm INL and 0.3ppm RMS noise. It uses delta-sigma technology...
Datasheet
LTC2400 on Analog.com
LT4256-3
Recommended for New Designs
The LT4256-3 is a high voltage Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. An internal driver controls...
Datasheet
LT4256-3 on Analog.com
LTC4271
Recommended for New Designs
The LTC4270/LTC4271 chipset is a 12-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 1 and Type 2 (high power) compliant...
LTC4271 on Analog.com
LTC3609
Production
The LTC3609 is a high efficiency, monolithic synchronous step-down DC/DC converter that can deliver up to 6A output current from a 4V to 32V (36V maximum...
Datasheet
LTC3609 on Analog.com
LTC3210-1
Production
The LTC3210-1 is a low noise charge pump DC/DC converter designed to drive four MAIN LEDs and one high current CAM LED for camera lighting. The LTC3210...
Datasheet
LTC3210-1 on Analog.com
LTC3121
Recommended for New Designs
The LTC3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability...
Datasheet
LTC3121 on Analog.com
LT1036
Obsolete
Obsolete Product: Data Sheet For Reference Only. Contact Analog Devices for Potential Replacement
The LT1036 features two positive regulators in the same...
Datasheet
LT1036 on Analog.com
LT1764A
Recommended for New Designs
The LT1764A is a low dropout regulator optimized for fast transient response. The device is capable of supplying 3A of output current with a dropout voltage...
Datasheet
LT1764A on Analog.com
LTM8048
Recommended for New Designs
The LTM8048 is an isolated flyback µModule (power module) DC/DC converter with LDO post regulator. The LTM8048 has an isolation rating of 725VDC. Included...
Datasheet
LTM8048 on Analog.com
LT1969
Last Time Buy
The LT1969 is an adjustable current version of the popular LT1886, a 200mA minimum output current, dual op amp with outstanding distortion performance...
Datasheet
LT1969 on Analog.com
LTC3122
Recommended for New Designs
The LTC3122 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 2.5A current limit along with the ability...
Datasheet
LTC3122 on Analog.com
LTC1968
Production
The LTC1968 is a true RMS-to-DC converter that uses an innovative delta-sigma computational technique. The benefits of the LTC1968 proprietary architecture...
Datasheet
LTC1968 on Analog.com
LT1140A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1140A on Analog.com
LT8616
Production
The LT8616 is a high efficiency, high speed, dual synchronous monolithic step-down switching regulator that consumes only 6.5µA of quiescent current with...
Datasheet
LT8616 on Analog.com
LT1613
Production
The LT1613 is the industry’s first 5-lead SOT-23 current mode DC/DC converter. Intended for small, low power applications, it operates from an input voltage...
Datasheet
LT1613 on Analog.com
LTC2063
Recommended for New Designs
The LTC2063/LTC2064/LTC2065 are single, dual, and quad low power, zero-drift, 20kHz amplifiers. The LTC2063/LTC2064/LTC2065 enable high resolution measurement...
Datasheet
LTC2063 on Analog.com
LT1499
Production
The LT1498/LT1499 are dual/quad, rail-to-rail input and output precision C-Load™ op amps with a 10MHz gain bandwidth product and a 6V/µs slew rate.
The...
Datasheet
LT1499 on Analog.com
LT1460
Production
The LT1460 is a micropower bandgap reference that combines very high accuracy and low drift with low power dissipation and small package size. This series...
Datasheet
LT1460 on Analog.com
LTC2194
Production
The LTC2195/LTC2194/LTC2193 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2194 on Analog.com
LTC3824
Production
The LTC3824 is a step-down DC/DC controller designed to drive an external P-channel MOSFET. With a wide input range of 4V to 60V and a high voltage gate...
Datasheet
LTC3824 on Analog.com
LT6237
Recommended for New Designs
The LT6236/LT6237/LT6238 are single/dual/quad low noise, rail-to-rail output op amps that feature 1.1nV/vHz input referred noise voltage density and draw...
Datasheet
LT6237 on Analog.com
LTC6084
Production
The LTC6084/LTC6085 are dual/quad, low cost, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifiers that feature 1pA of input...
Datasheet
LTC6084 on Analog.com
LTC7851
Recommended for New Designs
The LTC7851/LTC7851-1 are quad output multiphase synchronous step-down switching regulator controllers that employ a constant frequency voltage mode architecture...
Datasheet
LTC7851 on Analog.com
LTC4451
Recommended for New Designs
The LTC4451 is a high-performance Schottky diode replacement using an integrated N-Channel power MOSFET. It easily ORs power supplies together to increase...
Datasheet
LTC4451 on Analog.com
LTC2939
Production
The LTC2938/LTC2939 are con?gurable supply monitors for systems with up to four or six supply voltages that need watchdog supervision. One of sixteen preset...
Datasheet
LTC2939 on Analog.com
LTC2225
Production
The LTC2225 is a 12-bit 10Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2225 is perfect for...
Datasheet
LTC2225 on Analog.com
LTC2991
Recommended for New Designs
The LTC2991 is used to monitor system temperatures, voltages and currents. Through the I2C serial interface, the eight monitors can individually measure...
Datasheet
LTC2991 on Analog.com
LT8312
Production
The LT8312 is a power factor correction (PFC) boost controller. A LT8312-based design can achieve a power factor of greater than 0.99 by actively modulating...
Datasheet
LT8312 on Analog.com
LTC1471
Production
The LTC1470 switches the VCC pins of a Personal Computer Memory Card International Association (PCMCIA) card slot between three operating states: OFF,...
Datasheet
LTC1471 on Analog.com
LTC2965
Recommended for New Designs
The LTC2965 is a low current, high voltage single channel voltage monitor. Internal high value resistors sense the input monitor pin providing a compact...
Datasheet
LTC2965 on Analog.com
LTC2960
Recommended for New Designs
The LTC2960 is a nano-current, high voltage two-input voltage monitor, ideally suited for multicell battery applications. External resistive dividers configure...
Datasheet
LTC2960 on Analog.com
LTC6269-10
Recommended for New Designs
The LTC6268-10/LTC6269-10 is a single/dual 4GHz FET-input operational amplifier with extremely low input bias current and low input capacitance. It also...
Datasheet
LTC6269-10 on Analog.com
LTC4258
Not Recommended for New Designs
The LTC4258 is a quad –48V Hot Swap™ controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment (PSE). It consists of four independent...
Datasheet
LTC4258 on Analog.com
LTC6268-10
Recommended for New Designs
The LTC6268-10/LTC6269-10 is a single/dual 4GHz FET-input operational amplifier with extremely low input bias current and low input capacitance. It also...
Datasheet
LTC6268-10 on Analog.com
LTM4683
Recommended for New Designs
The LTM4683 is a quad 31.25A or single 125A stepdown
μModule® (power micromodule) DC/DC regulator
featuring remote configurability and telemetry monitoring...
LTM4683 on Analog.com
LTC2974
Recommended for New Designs
The LTC2974 is a 4-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2974 on Analog.com
LTC4313
Production
The LTC4313 is a hot swappable 2-wire bus buffer that provides bidirectional buffering while maintaining a low offset voltage and high noise margin up...
Datasheet
LTC4313 on Analog.com
LT8551
Recommended for New Designs
The LT8551 is a multiphase expander for synchronous boost DC/DC converters. It operates in tandem with any synchronous boost DC/DC converter to increase...
Datasheet
LT8551 on Analog.com
LTC4125
Recommended for New Designs
The LTC4125 is a simple and high performance monolithic full bridge resonant driver capable of delivering over 5W of power wirelessly to a properly tuned...
Datasheet
LTC4125 on Analog.com
LTC3252
Production
The LTC3252 is a switched capacitor step-down DC/DC converter that produces two adjustable regulated outputs from a single 2.7V to 5.5V input. The part...
Datasheet
LTC3252 on Analog.com
LT1006
Production
The LT1006 is the first precision single supply operational amplifier. Its design has been optimized for single supply operation with a full set of specifications...
Datasheet
LT1006 on Analog.com
LTC3219
Production
The LTC3219 is a highly integrated multidisplay LED driver. The device contains a high efficiency, low noise charge pump to provide power to nine universal...
Datasheet
LTC3219 on Analog.com
LTC3838-2
Recommended for New Designs
The LTC3838-2 is a dual-channel, PolyPhase® synchronous step-down DC/DC switching regulator controller. Two independent channels drive all N-channel power...
Datasheet
LTC3838-2 on Analog.com
LTC2436-1
Production
The LTC2436-1 is a 2-channel differential input micropower 16-bit No Latency ?S™ analog-to-digital converter with an integrated oscillator. It provides...
Datasheet
LTC2436-1 on Analog.com
LTC2336-18
Production
The LTC2336-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with fully differential inputs. Operating from a single 5V...
Datasheet
LTC2336-18 on Analog.com
LTC7051-1
Recommended for New Designs
The LTC7051-1 monolithic power stage fully integrates high speed drivers with low resistance half-bridge power switches plus comprehensive monitoring and...
Datasheet
LTC7051-1 on Analog.com
LT3480
Production
The LT3480 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V (60V maximum). A high...
Datasheet
LT3480 on Analog.com
LTC5549
Production
The LTC5549 is a general purpose passive doublebalanced mixer that can be used for upconversion or downconversion. The RF port is designed for the 2GHz...
Datasheet
LTC5549 on Analog.com
LTC2386-16
Production
The LTC2386-16 is a low noise, high speed, 16-bit 10Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2386-16 on Analog.com
LT1528
Production
The LT1528 is a 3A low dropout regulator optimized to handle the large load current transients associated with the current generation of microprocessors...
Datasheet
LT1528 on Analog.com
LTC4224
Recommended for New Designs
The LTC4224 Dual Low Voltage Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. It controls two supplies with...
Datasheet
LTC4224 on Analog.com
LTC4227
Recommended for New Designs
The LTC4227 offers ideal diode-OR and Hot Swapâ„¢ functions for two power rails by controlling external Nchannel MOSFETs. MOSFETs acting as ideal diodes...
Datasheet
LTC4227 on Analog.com
LTC2753
Production
The LTC2753 is a family of dual 12-, 14-, and 16-bit multiplying parallel-input, current-output DACs. These DACs operate from a single 2.7V to 5.5V supply...
Datasheet
LTC2753 on Analog.com
LT3045-1
Recommended for New Designs
The LT3045-1 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive...
Datasheet
LT3045-1 on Analog.com
LT8625SP
Recommended for New Designs
The LT8625SP/LT8625SP-1 synchronous step-down regulator features third-generation Silent Switcher technology which is uniquely designed to combine an ultralow...
LT8625SP on Analog.com
LT1814
Production
The LT1813/LT1814 are dual and quad, low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1813/LT1814...
Datasheet
LT1814 on Analog.com
LT7153SP
Recommended for New Designs
The LT®7153SP is a high efficiency monolithic
synchronous, Silent Switcher®2 buck regulator
capable of delivering ±25A to the load. The unique
constant...
Datasheet
LT7153SP on Analog.com
LTC1297
Production
The LTC1292/LTC1297 are data acquisition systems that contain a 12-bit, switched-capacitor successive approximation A/D, a differential input, sample-and...
Datasheet
LTC1297 on Analog.com
LTC2053
Production
The LTC2053 is a high precision instrumentation amplifier. The CMRR is typically 116dB with a single or dual 5V supply and is independent of gain. The...
Datasheet
LTC2053 on Analog.com
LTM4640
Production
The LTM4640 is a complete 20A step-down switching
mode power μModule® (micromodule) regulator in a
tiny 6.25mm × 6.25mm × 5.07mm BGA package. The
package...
Datasheet
LTM4640 on Analog.com
LTC1470
Production
The LTC1470 switches the VCC pins of a Personal Computer Memory Card International Association (PCMCIA) card slot between three operating states: OFF,...
Datasheet
LTC1470 on Analog.com
LT137A
Not Recommended for New Designs
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Analog Devices Are Now Obsolete
The LT137A/LT337A negative adjustable regulators will...
Datasheet
LT137A on Analog.com
LTM9001-GA
Not Recommended for New Designs
The LTM9001 is an integrated System in a Package (SiP) that includes a high-speed 16-bit A/D converter, matching network, anti-aliasing filter and a low...
Datasheet
LTM9001-GA on Analog.com
LT1268
Production
The LT1268B and LT1268 are monolithic high power switching regulators. Identical to the popular LT1070, except for switching frequency (150kHz) and higher...
Datasheet
LT1268 on Analog.com
LT1086
Production
The LT1086 is designed to provide up to 1.5A output current. All internal circuitry is designed to operate down to 1V input-to-output differential and...
Datasheet
LT1086 on Analog.com
LT3990
Production
The LT3990 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 62V, and consumes only 2.5µA of...
Datasheet
LT3990 on Analog.com
LT1182
Production
The LT1182/LT1183 are dual current mode switching regulators that provide the control function for Cold Cathode Fluorescent Lighting (CCFL) and Liquid...
Datasheet
LT1182 on Analog.com
LT3645
Production
The LT3645 is a dual output regulator combining a 500mA buck regulator and a 200mA low dropout linear regulator (LDO). The wide input voltage range of...
Datasheet
LT3645 on Analog.com
LT1115
Production
The LT1115 is the lowest noise audio operational amplifier available. This ultralow noise performance (0.9nV/vHz at 1kHz) is combined with high slew rates...
Datasheet
LT1115 on Analog.com
LTC5551
Production
The LTC5551 is a 2.5V to 3.6V mixer optimized for RF downconverting mixer applications that require very high dynamic range. The LTC5551 covers the 300MHz...
Datasheet
LTC5551 on Analog.com
LTC1710
Production
The LTC1710 SMBus dual switch has two built-in 0.4Ω/300mA switches that are controlled by a 2-wire SMBus interface. With a low standby current of 14µA...
Datasheet
LTC1710 on Analog.com
LTC3429
Production
The LTC3429/LTC3429B are high efficiency synchronous, fixed frequency, step-up DC/DC converters with true output load disconnect, inrush current limiting...
Datasheet
LTC3429 on Analog.com
LT8630
Recommended for New Designs
The LT8630 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 0.6A. The wide...
Datasheet
LT8630 on Analog.com
LT111A
Obsolete
Obsolete Product: Datasheet For Reference Purposes Only. Contact Analog Devices For Replacement Product.
The LT111A is an improved version of the LM111...
Datasheet
LT111A on Analog.com
LTC4216
Recommended for New Designs
The LTC4216 is a positive low voltage Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. It controls load...
Datasheet
LTC4216 on Analog.com
LTC1393
Production
The LTC1380/LTC1393 are CMOS analog multiplexers with SMBus® compatible digital interfaces. The LTC1380 is a single-ended 8-channel multiplexer, while...
Datasheet
LTC1393 on Analog.com
LT4356MP-1
Recommended for New Designs
The LT4356 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles...
Datasheet
LT4356MP-1 on Analog.com
LTC2151-12
Production
The LTC2152-12/LTC2151-12/LTC2150-12 are a family of 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2151-12 on Analog.com
LTC2911
Recommended for New Designs
The LTC2911 is a low power, high accuracy triple supply monitor with a power-fail comparator. Reset timeout may be selected with an external capacitor...
Datasheet
LTC2911 on Analog.com
LTP8803-1A
Recommended for New Designs
The LTP8803-1A is a 160A step-down μModule® regulator that provides microprocessor core voltage from 54V power distribution architecture. It features...
Datasheet
LTP8803-1A on Analog.com
LT3845A
Recommended for New Designs
The LT3845A is a high voltage, synchronous, current mode controller used for medium to high power, high efficiency supplies. It offers a wide 4V to 60V...
Datasheet
LT3845A on Analog.com
LTC5586
Production
The LTC5586 is a direct conversion quadrature demodulator optimized for high linearity zero-IF and low-IF receiver applications in the 300MHz to 6GHz frequency...
Datasheet
LTC5586 on Analog.com
LTC2412
Production
The LTC2412 is a 2-channel differential input micropower 24-bit No Latency ?S™ analog-to-digital converter with an integrated oscillator. It provides 2ppm...
Datasheet
LTC2412 on Analog.com
LTC3734
Production
The LTC3734 is a single-phase synchronous step-down switching regulator controller that drives all N-channel power MOSFETs in a constant frequency architecture...
Datasheet
LTC3734 on Analog.com
LT3474
Production
The LT3474/LT3474-1 are fixed frequency step-down DC/DC converters designed to operate as constant-current sources. An internal sense resistor monitors...
Datasheet
LT3474 on Analog.com
LT3088
Recommended for New Designs
The LT3088 is an 800mA low dropout linear regulator designed for rugged industrial applications. A key feature of the IC is the extended safe operating...
Datasheet
LT3088 on Analog.com
LTC2845
Production
The LTC2845 is a 5-driver/5-receiver multiprotocol transceiver. The LTC2845 and LTC2846 form the core of a complete software-selectable DTE or DCE interface...
Datasheet
LTC2845 on Analog.com
LT7184S
Recommended for New Designs
The LT7184SÂ is a dual-output monolithic PolyPhase
DC/DC synchronous step-down regulator that delivers
up to 7A of continuous current from both channels...
Datasheet
LT7184S on Analog.com
LTC2064
Recommended for New Designs
The LTC2063/LTC2064/LTC2065 are single, dual, and quad low power, zero-drift, 20kHz amplifiers. The LTC2063/LTC2064/LTC2065 enable high resolution measurement...
Datasheet
LTC2064 on Analog.com
LTC1296
Production
The LTC1293/4/6 is a family of data acquisition systems which contain a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor...
Datasheet
LTC1296 on Analog.com
LT1492
Production
The LT1492/LT1493 are dual/quad, low power, single supply precision op amps with 5MHz gain-bandwidth product, 3V/µs slew rate and only 450µA of quiescent...
Datasheet
LT1492 on Analog.com
LTM4601AHV
Production
The LTM4601AHV is a complete 12A step-down switch mode DC/DC power supply with onboard switching controller, MOSFETs, inductor and all support components...
Datasheet
LTM4601AHV on Analog.com
LTC4360
Recommended for New Designs
The LTC4360 overvoltage protection controller safeguards 2.5V to 5.5V systems from power supply overvoltage. It is designed for portable devices with multiple...
Datasheet
LTC4360 on Analog.com
LTC3858-1
Production
The LTC3858-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3858-1 on Analog.com
LTC2945
Recommended for New Designs
The LTC2945 is a rail-to-rail system monitor that measures current, voltage, and power. It features an operating range of 2.7V to 80V and includes a shunt...
Datasheet
LTC2945 on Analog.com
LTC3672B-2
Production
The LTC3672B-2 is a triple power supply composed of a 400mA synchronous buck regulator and two 150mA low-dropout linear regulators (LDOs). Constant-frequency...
Datasheet
LTC3672B-2 on Analog.com
LT1138A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1138A on Analog.com
LT3420
Production
The LT3420/LT3420-1 charge high voltage photoflash capacitors quickly and efficiently. Designed for use in both digital and film cameras, these devices...
Datasheet
LT3420 on Analog.com
LTC1452
Production
The LTC1451/LTC1452/LTC1453 are complete single supply, rail-to-rail voltage output 12-bit digital-to-analog converters (DACs) in an SO-8 package. They...
Datasheet
LTC1452 on Analog.com
LTC1164-5
Production
The LTC1164-5 is a monolithic 8th order filter; it approximates either a Butterworth or a Bessel lowpass response. The LTC1164-5 features clock-tunable...
Datasheet
LTC1164-5 on Analog.com
LTC1440
Production
The LTC1440 is an ultralow power comparator with a built-in voltage reference. The comparator features less than 4.0µA supply current over temperature...
Datasheet
LTC1440 on Analog.com
LT1630
Production
The LT1630/LT1631 are dual/quad, rail-to-rail input and output op amps with a 30MHz gain-bandwidth product and a 10V/µs slew rate.
The LT1630/LT1631 have...
Datasheet
LT1630 on Analog.com
LTC3863
Recommended for New Designs
The LTC3863 is a robust, inverting DC/DC PMOS controller optimized for automotive and industrial applications. It drives a P-channel power MOSFET to generate...
Datasheet
LTC3863 on Analog.com
LTC3129-1
Recommended for New Designs
The LTC3129-1 is a high efficiency, 200mA buck-boost DC/DC converter with a wide VIN and VOUT range. It includes an accurate RUN pin threshold to allow...
Datasheet
LTC3129-1 on Analog.com
LTC2206-14
Production
The LTC2207-14/LTC2206-14 are 105Msps/80Msps, sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals up to input...
Datasheet
LTC2206-14 on Analog.com
LTC4352
Recommended for New Designs
The LTC4352 creates a near-ideal diode using an external N-channel MOSFET. It replaces a high power Schottky diode and the associated heat sink, saving...
Datasheet
LTC4352 on Analog.com
LTC3717-1
Production
The LTC3717-1 is a synchronous step-down switching regulator controller for double data rate (DDR) and Quad Data Rateâ„¢ (QDRâ„¢) memory termination. The...
Datasheet
LTC3717-1 on Analog.com
LT1616
Production
The LT1616 is a current mode PWM step-down DC/DC converter with internal 0.6A power switch, packaged in a tiny 6-lead SOT-23. The wide input range of 3...
Datasheet
LT1616 on Analog.com
LTC1282
Production
The LTC1282 is a 6µs, 140ksps, sampling 12-bit A/D converter that draws only 12mW from a single 3V or dual ±3V supply. This easy-to-use device comes complete...
Datasheet
LTC1282 on Analog.com
LTC1921
Production
The LTC1921 monitors two independent –48V supplies, including their fuses, and drives up to three optoisolators to indicate status, in accordance with...
Datasheet
LTC1921 on Analog.com
LTC2422
Production
The LTC2421/LTC2422 are 1- and 2-channel 2.7V to 5.5V micropower 20-bit analog-to-digital converters with an integrated oscillator, 8ppm INL and 1.2ppm...
Datasheet
LTC2422 on Analog.com
LTC1453
Production
The LTC1451/LTC1452/LTC1453 are complete single supply, rail-to-rail voltage output 12-bit digital-to-analog converters (DACs) in an SO-8 package. They...
Datasheet
LTC1453 on Analog.com
LTC3810
Production
The LTC3810 is a synchronous step-down switching regulator controller that can directly step-down voltages from up to 100V, making it ideal for telecom...
Datasheet
LTC3810 on Analog.com
LTC2241-10
Production
The LTC2241-10 is a 210Msps, sampling 10-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2241-10 is perfect...
Datasheet
LTC2241-10 on Analog.com
LTC3215
Production
The LTC3215 is a low noise, high current charge pump DC/DC converter designed to power high current LEDs. The part includes an accurate programmable current...
Datasheet
LTC3215 on Analog.com
LT1796
Production
The LT1796 CAN transceiver provides built-in fault tolerance to survive in industrial and automotive environments. Discrete protection devices are not...
Datasheet
LT1796 on Analog.com
LT1105
Production
The LT1105 Offline Switching Regulator is designed for high input voltage applications using an external FET switch. The LT1105 is available and its totem...
Datasheet
LT1105 on Analog.com
LTC203
Production
The LTC201A, LTC202, and LTC203 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single...
Datasheet
LTC203 on Analog.com
LT8228
Recommended for New Designs
The LT8228 is a 100V bidirectional constant-current or constant-voltage synchronous buck or boost controller with independent compensation network. The...
Datasheet
LT8228 on Analog.com
LTC3676
Recommended for New Designs
The LTC3676 is a complete power management solution for advanced portable application processor-based systems. The device contains four synchronous step...
Datasheet
LTC3676 on Analog.com
LT1205
Production
The LT1203 is a wideband 2-input video multiplexer designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured...
Datasheet
LT1205 on Analog.com
LTC2376-18
Production
The LTC2376-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2376-18 has...
Datasheet
LTC2376-18 on Analog.com
LT1021
Production
The LT1021 is a precision reference with ultralow drift and noise, extremely good long term stability and almost total immunity to input voltage variations...
Datasheet
LT1021 on Analog.com
LTC5544
Last Time Buy
The LTC5544 is part of a family of high dynamic range, high gain passive downconverting mixers covering the 600MHz to 6GHz frequency range. The LTC5544...
Datasheet
LTC5544 on Analog.com
LT1109A
Production
The LT1109A is a simple step-up DC/DC converter. The 8-pin DIP or SOIC devices require only four external components to construct a complete DC/DC converter...
Datasheet
LT1109A on Analog.com
LTP5900-WHM
Production
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTP5900-WHM is the 22...
Datasheet
LTP5900-WHM on Analog.com
LTM8025
Production
The LTM8025 is a 36VIN, 3A step-down µModule® (micromodule) converter. Included in the package are the switching controller, power switches, inductor and...
Datasheet
LTM8025 on Analog.com
LTC3453
Production
The LTC3453 is a synchronous buck-boost DC/DC converter optimized for driving up to 4 white LEDs at a combined current of up to 500mA from a single Li...
Datasheet
LTC3453 on Analog.com
LT1952
Production
The LT1952/LT1952-1 are current mode PWM controllers optimized to control the forward converter topology, using one primary MOSFET. The LT1952/LT1952-1...
Datasheet
LT1952 on Analog.com
LTC2163
Production
The LTC2165/LTC2164/LTC2163 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2163 on Analog.com
LTC2358-16
Production
The LTC2358-16 is a 16-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2358-16 on Analog.com
LTC4210-3
Recommended for New Designs
The LTC4210-3/LTC4210-4 is a 6-pin SOT-23 Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal...
Datasheet
LTC4210-3 on Analog.com
LTC2209
Production
The LTC2209 is a 160Msps 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals with input frequencies up to 700MHz. The...
Datasheet
LTC2209 on Analog.com
LT5537
Production
The LT5537 is a wide dynamic range RF/IF detector, operational from below 10MHz to 1000MHz. The lower limit of the operating frequency range can be extended...
Datasheet
LT5537 on Analog.com
LTC5583
Production
The LTC5583 is a dual-channel RMS power detector, capable of measuring two AC signals with wide dynamic range, from –59dBm to 4dBm, depending on frequency...
Datasheet
LTC5583 on Analog.com
LTC3406-1.5
Production
The LTC3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in...
Datasheet
LTC3406-1.5 on Analog.com
LT4356-3
Recommended for New Designs
The LT4356-3 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles...
Datasheet
LT4356-3 on Analog.com
LT1947
Production
The LT1947 is a highly integrated multiple output DC/DC converter designed for use in TFT-LCD panels. The device contains two independent switching regulators...
Datasheet
LT1947 on Analog.com
LT1994
Production
The LT1994 is a high precision, very low noise, low distortion, fully differential input/output amplifier optimized for 3V, single supply operation. The...
Datasheet
LT1994 on Analog.com
LTC3407A-2
Production
The LTC3407A-2 is a dual, constant frequency, synchronous step-down DC/DC converter. Intended for low power applications, it operates from a 2.5V to 5...
Datasheet
LTC3407A-2 on Analog.com
LTC1622
Production
The LTC1622 is a constant frequency current mode step-down DC/DC controller providing excellent AC and DC load and line regulation. The device incorporates...
Datasheet
LTC1622 on Analog.com
LTC2153-12
Not Recommended for New Designs
The LTC2153-12 is a 310Msps 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications...
Datasheet
LTC2153-12 on Analog.com
LTC2240-10
Production
The LTC2240-10 is a 170Msps, sampling 10-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2240-10 is perfect...
Datasheet
LTC2240-10 on Analog.com
LTC1448
Production
The LTC1448 is a dual rail-to-rail voltage output, 12-bit digital-to-analog converter (DAC). It includes rail-to-rail output buffer amplifiers and an easy...
Datasheet
LTC1448 on Analog.com
LT3591
Production
The LT3591 is a fixed frequency step-up DC/DC converter speci?cally designed to drive up to ten white LEDs in series from a Li-Ion cell. Series connection...
Datasheet
LT3591 on Analog.com
LT138A
Not Recommended for New Designs
The LT138A series of adjustable regulators provide 5A
output current over an output voltage range of 1.2V to
32V. The internal voltage reference is trimmed...
Datasheet
LT138A on Analog.com
LT1912
Production
The LT1912 is an adjustable frequency (200kHz to 500kHz) monolithic step-down switching regulator that accepts input voltages up to 36V. A high efficiency...
Datasheet
LT1912 on Analog.com
LTC3727A-1
Production
The LTC3727A-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3727A-1 on Analog.com
LT1054
Production
The LT1054 is a monolithic, bipolar, switched-capacitor voltage converter and regulator. The LT1054 provides higher output current than previously available...
Datasheet
LT1054 on Analog.com
LTC2267-12
Production
The LTC2268-12/LTC2267-12/LTC2266-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2267-12 on Analog.com
LTC2914
Production
The LTC2914 is a quad input voltage monitor intended for monitoring multiple voltages in a variety of applications. Dual inputs for each monitored voltage...
Datasheet
LTC2914 on Analog.com
LTC1563
Production
The LTC1563-2/LTC1563-3 are a family of extremely easy-to-use, active RC lowpass filters with rail-to-rail inputs and outputs and low DC offset suitable...
Datasheet
LTC1563 on Analog.com
LTC3110
Recommended for New Designs
The LTC3110 is a 2A bidirectional buck-boost DC/DC regulator with capacitor charger and balancer. Its wide 0.1V to 5.5V capacitor/battery voltage and 1...
Datasheet
LTC3110 on Analog.com
LTC1443
Production
The LTC1443/LTC1444/LTC1445 are ultralow power quad comparators with a built-in reference. The comparators feature less than 8.5µA supply current over...
Datasheet
LTC1443 on Analog.com
LT6600-20
Production
The LT6600-20 combines a fully differential amplifier with a 4th order 20MHz lowpass filter approximating a Chebyshev frequency response. Most differential...
Datasheet
LT6600-20 on Analog.com
LTC1502-3.3
Production
The LTC1502-3.3 is a quadrupler charge pump DC/DC converter that produces a regulated 3.3V output from a single alkaline cell input. It requires only five...
Datasheet
LTC1502-3.3 on Analog.com
LTC7068
Recommended for New Designs
The LTC7068 is a half-bridge dual N-Channel MOSFET gate driver that operates at up to 150V input voltage and features a supply-independent three-state...
Datasheet
LTC7068 on Analog.com
LTC2470
Production
The LTC2470/LTC2472 are small, 16-bit analog-to-digital converters with an integrated precision reference and a selectable 208sps or 833sps output rate...
Datasheet
LTC2470 on Analog.com
LTC1293
Production
The LTC1293/4/6 is a family of data acquisition systems which contain a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor...
Datasheet
LTC1293 on Analog.com
LTC4099
Production
The LTC4099 is an I2C controlled high efficiency USB PowerPath™ controller and full-featured Li-Ion/Polymer battery charger. It seamlessly manages power...
Datasheet
LTC4099 on Analog.com
LT1581
Production
The LT1581 is a 10A low dropout regulator designed to power the new generation of microprocessors. The dropout voltage of this device is 100mV at light...
Datasheet
LT1581 on Analog.com
LTC5597
Recommended for New Designs
The LTC5597 is a high accuracy RMS power detector that provides a very wide RF input bandwidth, from 100MHz up to 70GHz. This makes the device suitable...
Datasheet
LTC5597 on Analog.com
LTC1163
Production
The LTC1163/LTC1165 triple low voltage MOSFET drivers make it possible to switch supply or ground referenced loads hrough inexpensive, low RDS(ON) N-channel...
Datasheet
LTC1163 on Analog.com
LT3682
Production
The LT3682 is an adjustable frequency (250kHz to 2.2MHz) monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 0...
Datasheet
LT3682 on Analog.com
LTC2387-16
Production
The LTC2387-16 is a low noise, high speed, 16-bit 15Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2387-16 on Analog.com
LT581
Obsolete
OBSOLETE PRODUCT Data Sheet For Reference Only
The LT580/LT581 are bandgap voltage references utilizing thin film technology and a greatly improved curvature...
Datasheet
LT581 on Analog.com
LTC6957-1
Last Time Buy
The LTC6957-1/LTC6957-2/LTC6957-3/LTC6957-4 is a family of very low phase noise, dual output AC signal buffer/driver/logic level translators. The input...
LTC6957-1 on Analog.com
LTC3561
Production
The LTC3561 is a constant-frequency, synchronous, step-down DC/DC converter. Intended for medium power applications, it operates from a 2.63V to 5.5V input...
Datasheet
LTC3561 on Analog.com
LT1794
Production
The LT1794 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily...
Datasheet
LT1794 on Analog.com
LTC3455
Production
The LTC3455/LTC3455-1 are complete power management solutions for a variety of portable applications. These devices contain two synchronous step-down DC...
Datasheet
LTC3455 on Analog.com
LT3652HV
Recommended for New Designs
The LT3652HV is a complete monolithic step-down battery charger that operates over a 4.95V to 34V input range. The LT3652HV provides a constant-current...
Datasheet
LT3652HV on Analog.com
LTC3202
Production
The LTC3202 is a low noise, constant frequency charge pump DC/DC converter that uses fractional conversion to increase efficiency in white LED applications...
Datasheet
LTC3202 on Analog.com
LTM4637
Recommended for New Designs
The LTM4637 is a complete 20A output high efficiency switch mode step-down DC/DC µModule (power module) regulator. Included in the package are the switching...
Datasheet
LTM4637 on Analog.com
LTC3851A-1
Production
The LTC3851A-1 is a high performance synchronous step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage....
Datasheet
LTC3851A-1 on Analog.com
LTC1871-7
Production
The LTC1871-7 is a current mode, boost, flyback and SEPIC controller optimized for driving 6V-rated MOSFETs in high voltage applications. The LTC1871-7...
Datasheet
LTC1871-7 on Analog.com
LTC2377-16
Production
The LTC2377-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2377-16 has...
Datasheet
LTC2377-16 on Analog.com
LTC2964
Recommended for New Designs
The LTC2962 series of configurable power supply monitors
can supervise systems with up to four supply voltages.
One of 16 preset or adjustable voltage...
Datasheet
LTC2964 on Analog.com
LT1359
Production
The LT1358/LT1359 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1359 on Analog.com
LTC2246H
Production
The LTC2246H is a 14-bit 25Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2246H is perfect...
Datasheet
LTC2246H on Analog.com
LTC1741
Production
The LTC1741 is an 65Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1741 on Analog.com
LTC1517-5
Production
The LTC1517-5 is a micropower charge pump DC/DC converter that produces a regulated 5V output. The input voltage range is 2.7V to 5V. Extremely low operating...
Datasheet
LTC1517-5 on Analog.com
LTC3417A-1
Production
The LTC3417A-1 is a dual constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.25V to...
Datasheet
LTC3417A-1 on Analog.com
LTC2247
Production
The LTC2248/LTC2247/LTC2246 are 14-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2247 on Analog.com
LTC1730
Production
The LTC1730 is a complete pulse charger for 1-cell lithium-ion batteries. When charging a depleted cell, the internal MOSFET is fully on allowing the current...
Datasheet
LTC1730 on Analog.com
LTC5591
Production
The LTC5591 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The...
Datasheet
LTC5591 on Analog.com
LT8714
Recommended for New Designs
The LT8714 is a synchronous PWM DC/DC controller designed for a four quadrant output converter. The output voltage cleanly transitions through zero volts...
Datasheet
LT8714 on Analog.com
LTM8064
Recommended for New Designs
The LTM8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching...
Datasheet
LTM8064 on Analog.com
LT3062
Recommended for New Designs
The LT3062 is a micropower, low dropout (LDO) linear regulator that operates over a 1.6V to 45V supply range and is available in a series of fixed output...
Datasheet
LT3062 on Analog.com
LTC1604
Production
The LTC1604 is a 333ksps, 16-bit sampling A/D converter that draws only 220mW from ±5V supplies. This high performance device includes a high dynamic range...
Datasheet
LTC1604 on Analog.com
LT1932
Production
The LT1932 is a fixed frequency step-up DC/DC converter designed to operate as a constant-current source. Because it directly regulates output current...
Datasheet
LT1932 on Analog.com
LTC2054
Production
The LTC2054/LTC2055 are low power, low noise, single/dual, zero-drift operational amplifiers with an extended temperature version (LTC2054MP) that has...
Datasheet
LTC2054 on Analog.com
LTC1149
Production
The LTC1149 series is a family of synchronous step down switching regulator controllers featuring automatic Burst Mode™ operation to maintain high efficiencies...
Datasheet
LTC1149 on Analog.com
LTC2351-12
Production
The LTC2351-12 is a 12-bit, 1.5Msps ADC with six simultaneously sampled differential inputs. The device draws only 5.5mA from a single 3V supply, and comes...
Datasheet
LTC2351-12 on Analog.com
LT3574
Production
The LT3574 is a monolithic switching regulator specifically designed for the isolated flyback topology. No third winding or opto-isolator is required for...
Datasheet
LT3574 on Analog.com
LTC3706
Not Recommended for New Designs
The LTC3706 is a PolyPhase capable secondary-side controller for synchronous forward converters. When used in conjunction with the LTC3705 gate driver...
Datasheet
LTC3706 on Analog.com
LTC2447
Production
The LTC2446/LTC2447 4-terminal switching enables multiplexed ratiometric measurements. Four sets of selectable differential inputs coupled with four sets...
Datasheet
LTC2447 on Analog.com
LT1088
Obsolete
The LT1088 is a thermally based RMS-DC converter building block. It converts the input waveform to heat. Using external circuitry, the thermal signal...
Datasheet
LT1088 on Analog.com
LT1316
Production
The LT1316 is a micropower step-up DC/DC converter that operates from an input voltage as low as 1.5V. A programmable input current limiting function allows...
Datasheet
LT1316 on Analog.com
LT1999
Recommended for New Designs
The LT1999 is a high speed precision current sense amplifier, designed to monitor bidirectional currents over a wide common mode range. The LT1999 is offered...
Datasheet
LT1999 on Analog.com
LTC2356-14
Production
The LTC2356-12/LTC2356-14 are 12-bit/14-bit, 3.5Msps serial ADCs with differential inputs. The devices draw only 5.5mA from a single 3.3V supply and come...
Datasheet
LTC2356-14 on Analog.com
LT6232
Production
The LT6230/LT6231/LT6232 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.1nV/√Hz noise voltage and draw...
Datasheet
LT6232 on Analog.com
LT1251
Production
The LT1251/LT1256 are 2-input, 1-output, 40MHz current feedback amplifiers with a linear control circuit that sets the amount each input contributes to...
Datasheet
LT1251 on Analog.com
LT8698S
Recommended for New Designs
The LT8698S is a compact, high efficiency, synchronous monolithic step-down switching regulator designed to power the 5V USB VBUS rail with up to 3A from...
Datasheet
LT8698S on Analog.com
LTP8800-1A
Recommended for New Designs
The LTP8800-1A is a 150A step-down μModule regulator that provides microprocessor core voltage from 54V power distribution architecture. It features remote...
Datasheet
LTP8800-1A on Analog.com
LTC2864
Production
The LTC2862/LTC2863/LTC2864/LTC2865 are low power, 20Mbps or 250kbps RS485/RS422 transceivers operating on 3V to 5.5V supplies that feature ±60V overvoltage...
Datasheet
LTC2864 on Analog.com
LT8645S
Recommended for New Designs
The LT8645S/LT8646S synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI emissions while delivering...
Datasheet
LT8645S on Analog.com
LTC7149
Recommended for New Designs
The LTC7149 is a high efficiency 60V, 4A synchronous monolithic step-down regulator for inverting output applications. The regulator features a single...
Datasheet
LTC7149 on Analog.com
LTC6810-2
Production
The LTC6810 is a multicell battery stack monitor. The
LTC6810 measures up to 6 series-connected battery cells
with a total measurement error of less than...
Datasheet
LTC6810-2 on Analog.com
LTC3355
Recommended for New Designs
The LTC3355 is a complete input power interrupt ride-through DC/DC system. The part charges a supercapacitor while delivering load current to VOUT, and...
Datasheet
LTC3355 on Analog.com
LT6002
Production
The LT6000/LT6001/LT6002 are single, dual and quad precision rail-to-rail input and output operational amplifiers. Designed to maximize battery life in...
Datasheet
LT6002 on Analog.com
LTC3562
Production
The LTC3562 is a quad high efficiency monolithic synchronous step-down regulator with an I2C interface. Two regulators are externally adjustable and can...
Datasheet
LTC3562 on Analog.com
LT6376
Recommended for New Designs
The LT6376 is a gain of 10 difference amplifier which combines excellent DC precision, a very high input common mode range and a wide supply voltage range...
Datasheet
LT6376 on Analog.com
LTC1285
Production
The LTC1285/LTC1288 are 3V micropower, 12-bit, successive approximation sampling A/D converters. They typically draw only 160µA of supply current when...
Datasheet
LTC1285 on Analog.com
LTC1405
Production
The LTC1405 is a 5Msps, 12-bit sampling A/D converter that draws only 115mW from either single 5V or dual ±5V supplies. This easy-to-use device includes...
Datasheet
LTC1405 on Analog.com
LTC2160
Production
The LTC2162/LTC2161/LTC2160 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2160 on Analog.com
LT8316
Production
The LT8316 is a micropower, high voltage flyback controller. No opto-isolator is needed for regulation. The device samples the output voltage from the...
Datasheet
LT8316 on Analog.com
LT1188
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1188 is a monolithic high side switch employing bipolar...
Datasheet
LT1188 on Analog.com
LT3461A
Production
The LT3461/LT3461A are general purpose fixed frequency current mode step-up DC/DC converters. Both devices feature an integrated Schottky and a low VCESAT...
Datasheet
LT3461A on Analog.com
LT1784
Production
The LT1784 is a 2.5MHz op amp available in the small SOT-23 package that operates on all single and split supplies with a total voltage of 2.5V to 18V...
Datasheet
LT1784 on Analog.com
LTC1659
Production
The LTC1659 is a single supply, rail-to-rail voltage output, 12-bit digital-to-analog converter (DAC) in an MSOP package. It includes a rail-to-rail output...
Datasheet
LTC1659 on Analog.com
LTC3300-1
Recommended for New Designs
The LTC3300-1 is a fault-protected controller IC for transformer-based bidirectional active balancing of multicell battery stacks. All associated gate...
Datasheet
LTC3300-1 on Analog.com
LTC2463
Production
The LTC2461/LTC2463 are ultra tiny, 16-Bit analog to digital converters with an integrated precision reference. They use a single 2.7V to 5.5V supply and...
Datasheet
LTC2463 on Analog.com
LTC4234
Recommended for New Designs
The LTC4234 is an integrated solution for Hot Swap™ applications that allows a board to be safely inserted and removed from a live backplane. The part...
Datasheet
LTC4234 on Analog.com
LT1016
Production
The LT1016 is an UltraFast 10ns comparator that interfaces directly to TTL/CMOS logic while operating off either ±5V or single 5V supplies. Tight offset...
Datasheet
LT1016 on Analog.com
LTC1069-7
Production
The LTC1069-7 is a monolithic, clock-tunable, linear phase, 8th order lowpass filter. The amplitude response of the filter approximates a raised cosine...
Datasheet
LTC1069-7 on Analog.com
LTC3541-1
Production
The LTC3541-1 combines a synchronous buck DC/DC converter with a very low dropout linear regulator (VLDO) to provide up to two output voltages from a single...
Datasheet
LTC3541-1 on Analog.com
LTC2158-14
Not Recommended for New Designs
The LTC2158-14 is a 2-channel simultaneous sampling 310Msps 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It...
Datasheet
LTC2158-14 on Analog.com
LTC6903
Production
The LTC6903/LTC6904 are low power self contained digital frequency sources providing a precision frequency from 1kHz to 68MHz, set through a serial port...
Datasheet
LTC6903 on Analog.com
LTC7800
Recommended for New Designs
The LTC7800 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage. A constant...
Datasheet
LTC7800 on Analog.com
LTC2430
Production
The LTC2430/LTC2431 are 2.7V to 5.5V micropower 20-bit differential ?S analog-to-digital converters with an integrated oscillator, 3ppm INL and 0.56ppm...
Datasheet
LTC2430 on Analog.com
LTC2052
Production
The LTC2051/LTC2052 are dual/quad zero-drift operational amplifiers available in the MS8 and SO-8/GN16 and S14 packages. For space limited applications...
Datasheet
LTC2052 on Analog.com
LT3596
Recommended for New Designs
The LT3596 is a 60V step-down LED Driver. It achieves 10,000:1 digital PWM dimming at 100Hz with fast NPN current sources driving up to 10 LEDs in each...
Datasheet
LT3596 on Analog.com
LTM9008-14
Not Recommended for New Designs
The LTM9008-14/LTM9007-14/LTM9006-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9008-14 on Analog.com
LTC2634
Production
The LTC2634 is a family of quad 12-, 10- and 8-bit voltage output DACs with an integrated, high accuracy, low drift 10ppm/°C reference in 16-lead QFN and...
Datasheet
LTC2634 on Analog.com
LTP8800-4A
Recommended for New Designs
The LTP™8800-4A is a 200A step-down μModule® regulator
that provides microprocessor core voltage from 54V
power distribution architecture. LTP8800...
Datasheet
LTP8800-4A on Analog.com
LT6559
Recommended for New Designs
The LT6559 is a low cost, high speed, triple amplifier that has been optimized for excellent video performance on a single 5V supply, yet ? ts in the small...
Datasheet
LT6559 on Analog.com
LT8393
Recommended for New Designs
The LT8393 is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage...
Datasheet
LT8393 on Analog.com
LTM4604A
Production
The LTM4604A is a complete 4A switch mode step-down µModule® (power module) regulator with ±1.75% maximum total output voltage error. Included in the package...
Datasheet
LTM4604A on Analog.com
LTC1865
Production
The LTC1864/LTC1865 are 16-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 5V supply. At 250ksps, the supply current...
Datasheet
LTC1865 on Analog.com
LTC2664
Production
The LTC2664 is a family of four-channel, 16-/12-bit ±10V digital-to-analog converters with integrated precision references. They are guaranteed monotonic...
Datasheet
LTC2664 on Analog.com
LTC2370-16
Production
The LTC2370-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2370-16 has...
Datasheet
LTC2370-16 on Analog.com
LTC5532
Production
The LTC5532 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5532 on Analog.com
LT6221
Production
The LT6220/LT6221/LT6222 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT6221 on Analog.com
LTC3440
Production
The LTC3440 is a high efficiency, fixed frequency, Buck-Boost DC/DC converter that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3440 on Analog.com
LT8640S
Recommended for New Designs
The LT®8640S/LT8643S/LT8640SA/LT8643SA synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI...
Datasheet
LT8640S on Analog.com
LTC3521
Recommended for New Designs
The LTC3521 combines a 1A buck-boost DC/DC converter and dual 600mA synchronous buck DC/DC converters. The 1.1MHz switching frequency minimizes the solution...
Datasheet
LTC3521 on Analog.com
LTC2512-24
Production
The LTC2512-24 is a low noise, low power, high-performance 24-bit ADC with an integrated configurable digital filter. Operating from a single 2.5V supply...
Datasheet
LTC2512-24 on Analog.com
LTC3831-1
Production
The LTC3831-1 is a high power, high efficiency switching regulator controller designed for DDR memory termination. The LTC3831-1 generates an output voltage...
Datasheet
LTC3831-1 on Analog.com
LT1634
Production
The LT1634 is a micropower, precision, shunt voltage reference. The bandgap reference uses trimmed precision thin film resistors to achieve 0.05% initial...
Datasheet
LT1634 on Analog.com
LTC2364-18
Production
The LTC2364-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2364-18 has...
Datasheet
LTC2364-18 on Analog.com
LT1114
Production
The LT1112 dual and LT1114 quad op amps achieve a new standard in combining low cost and outstanding precision specifications.
The performance of the selected...
Datasheet
LT1114 on Analog.com
LTC1957
Obsolete
The LTC1957-2 is a dual band RF power controller for power amplifiers operating in the 850MHz to 2GHz range. The input voltage range is optimized for operation...
Datasheet
LTC1957 on Analog.com
LTC3806
Production
The LTC3806 is a current mode synchronous flyback controller that drives N-channel power MOSFETs and requires very few external components. It is intended...
Datasheet
LTC3806 on Analog.com
LT5401
Recommended for New Designs
The LT5401 is an ultra-precision matched resistor network optimized for use with fully differential or difference amplifiers, and with excellent matching...
Datasheet
LT5401 on Analog.com
LTC2954
Recommended for New Designs
The LTC2954 is a pushbutton on/off controller that manages system power via a pushbutton interface. An enable output toggles system power while an interrupt...
Datasheet
LTC2954 on Analog.com
LTM4614
Recommended for New Designs
The LTM4614 s a complete 4A dual output switching mode
step-down µModule® regulator. Included in the package
are the switching controllers, power FETs...
Datasheet
LTM4614 on Analog.com
LT3991
Production
The LT3991 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 55V. Low quiescent current design...
Datasheet
LT3991 on Analog.com
LT8627SP
Recommended for New Designs
The LT8627SP synchronous step-down regulator features third-generation Silent Switcher technology which is uniquely designed to combine an ultralow noise...
Datasheet
LT8627SP on Analog.com
LTC3788-1
Production
The LTC3788-1 is a high performance 2-phase dual synchronous boost converter controller that drives all N-channel power MOSFETs. Synchronous rectification...
Datasheet
LTC3788-1 on Analog.com
LTC1911
Production
The LTC1911 is a switched capacitor step-down DC/DC converter that produces a 1.5V or 1.8V regulated output from a 2.7V to 5.5V input. The part uses switched...
Datasheet
LTC1911 on Analog.com
LTC2281
Production
The LTC2281 is a 10-bit 125Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2281 is perfect...
Datasheet
LTC2281 on Analog.com
LT3970
Recommended for New Designs
The LT3970 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 40V, and consumes only 2.5µA of...
Datasheet
LT3970 on Analog.com
LTC3636
Recommended for New Designs
The LTC3636/LTC3636-1 is a high efficiency, dual-channel monolithic synchronous buck regulator using a controlled on-time current mode architecture, with...
Datasheet
LTC3636 on Analog.com
LTC2170-12
Production
The LTC2172-12/LTC2171-12/LTC2170-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2170-12 on Analog.com
LT3091
Recommended for New Designs
The LT3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards...
Datasheet
LT3091 on Analog.com
LTC6943
Not Recommended for New Designs
The LTC6943 is a monolithic, charge-balanced, dual switched capacitor instrumentation building block. A pair of switches alternately connects an external...
Datasheet
LTC6943 on Analog.com
LTC2641
Production
The LTC2641/LTC2642 are families of 16-, 14- and 12-bit unbuffered voltage output DACs. These DACs operate from a single 2.7V to 5.5V supply and are guaranteed...
Datasheet
LTC2641 on Analog.com
LT3073
Recommended for New Designs
The LT3073 is a low voltage, ultra-low noise, and ultra-fast transient response linear regulator. The device supplies up to 3A with a typical dropout voltage...
Datasheet
LT3073 on Analog.com
LTC1250
Production
The LTC1250 is a high performance, very low noise zero-drift operational amplifier. The LTC1250's combination of low front-end noise and DC precision makes...
Datasheet
LTC1250 on Analog.com
LTC2901
Production
The LTC2901 is a programmable supply monitor for systems with up to four supply voltages. One of 16 preset or adjustable voltage monitor combinations can...
Datasheet
LTC2901 on Analog.com
LTC2222
Production
The LTC2222 and LTC2223 are 105Msps/80Msps, sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2222...
Datasheet
LTC2222 on Analog.com
LT6222
Production
The LT6220/LT6221/LT6222 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT6222 on Analog.com
LT3483
Production
The LT3483/LT3483A are micropower inverting DC/DC converters with integrated Schottky and one resistor feedback. The small package size, high level of...
Datasheet
LT3483 on Analog.com
LTC3458
Recommended for New Designs
The LTC3458 is a high efficiency, current mode, fixed frequency, step up DC/DC converter with true output disconnect and inrush current limiting. The LTC3458...
Datasheet
LTC3458 on Analog.com
LTC1334
Production
The LTC1334 is a low power CMOS bidirectional transceiver featuring two reconfigurable interface ports. It can be configured as two RS485 differential...
Datasheet
LTC1334 on Analog.com
LTC3732
Production
The LTC3732 is a PolyPhase® synchronous step-down switching regulator controller that drives all N-channel external power MOSFET stages in a phase-lockable...
Datasheet
LTC3732 on Analog.com
LT8638S
Recommended for New Designs
The LT8638S synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI emissions while delivering...
Datasheet
LT8638S on Analog.com
LTC3772B
Production
The LTC3772B is a constant frequency current mode step-down DC/DC controller in a low profile 8-lead SOT-23 (ThinSOT™) and a 3mm × 2mm DFN package....
Datasheet
LTC3772B on Analog.com
LTC5541
Production
The LTC5541 is part of a family of high dynamic range passive, high gain downconverting mixers covering the 600MHz to 4GHz frequency range. The LTC5541...
Datasheet
LTC5541 on Analog.com
LTC2170-14
Production
The LTC2172-14/LTC2171-14/LTC2170-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2170-14 on Analog.com
LTC4411
Recommended for New Designs
The LTC4411 is an ideal diode IC, capable of supplying up to 2.6A from an input voltage between 2.6V and 5.5V. The LTC4411 is housed in a 5-lead 1mm profile...
Datasheet
LTC4411 on Analog.com
LT1071
Production
The LT®1070/LT1071 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck, boost...
Datasheet
LT1071 on Analog.com
LTM4651
Recommended for New Designs
The LTM4651 is an ultralow noise, 58V, 24W DC/DC µModule® inverting topology regulator. It regulates a negative output voltage (VOUT–) from a positive...
Datasheet
LTM4651 on Analog.com
LTC2055
Production
The LTC2054/LTC2055 are low power, low noise, single/dual, zero-drift operational amplifiers with an extended temperature version (LTC2054MP) that has...
Datasheet
LTC2055 on Analog.com
LTC4300A-1
Production
The LTC4300A series hot swappable 2-wire bus buffers
allow I/O card insertion into a live backplane without
corruption of the data and clock busses. When...
Datasheet
LTC4300A-1 on Analog.com
LTC3454
Production
The LTC3454 is a synchronous buck-boost DC/DC converter optimized for driving a single high power LED at currents up to 1A from a single cell Li-Ion battery...
Datasheet
LTC3454 on Analog.com
LTC7106-1
Obsolete
The LTC7106-1 is a precision, SPI controlled, bidirectional current digital-to-analog converter that adjusts the output voltage of any conventional VFB...
Datasheet
LTC7106-1 on Analog.com
LT3517
Production
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver...
Datasheet
LT3517 on Analog.com
LT6207
Last Time Buy
The LT6205/LT6206/LT6207 are low cost single/dual/quad voltage feedback amplifiers that feature 100MHz gain-bandwidth product, 450V/µs slew rate and 50mA...
Datasheet
LT6207 on Analog.com
LT1259
Production
The LT1259 contains two independent 130MHz current feedback amplifiers, each with a shutdown pin. These amplifiers are designed for excellent linearity...
Datasheet
LT1259 on Analog.com
LTC3558
Production
The LTC3558 is a USB battery charger with dual high ef?ciency switching regulators. The device is ideally suited to power single-cell Li-Ion/Polymer based...
Datasheet
LTC3558 on Analog.com
LT3740
Production
The LT3740 is a synchronous step-down switching regulator controller that drives N-channel power MOSFET stages. The controller uses valley current mode...
Datasheet
LT3740 on Analog.com
LT1766
Production
The LT1766/LT1766-5 are 200kHz monolithic buck switching regulators that accept input voltages up to 60V. A high efficiency 1.5A, 0.2O switch is included...
Datasheet
LT1766 on Analog.com
LTC1865L
Production
The LTC1864L/LTC1865L are 16-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 3V supply. At 150ksps, the supply current...
Datasheet
LTC1865L on Analog.com
LTC1553L
Production
The LTC1553L is a high power, high efficiency switching regulator controller optimized for a 5V input to 1.8V-3.5V output applications. It features a digitally...
Datasheet
LTC1553L on Analog.com
LTM4681
Recommended for New Designs
The LTM4681 is a quad 31.25A or single 125A stepdown μModule® (power module) DC/DC regulator featuring remote configurability and telemetry-monitoringÂ...
Datasheet
LTM4681 on Analog.com
LTC2195
Production
The LTC2195/LTC2194/LTC2193 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2195 on Analog.com
LT1621
Production
The LT1620 simplifies the design of high performance,
controlled current battery charging circuits when used in
conjunction with a current mode PWM controller...
Datasheet
LT1621 on Analog.com
LTC6430-20
Recommended for New Designs
The LTC6430-20 is a differential gain block amplifier designed to drive high resolution, high speed ADCs with excellent linearity beyond 1000MHz and with...
Datasheet
LTC6430-20 on Analog.com
LT1525A
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1525A and LT1527A are improved general purpose switching...
Datasheet
LT1525A on Analog.com
LTC7804
Recommended for New Designs
The LTC7804 is a high performance synchronous boost DC/DC switching regulator controller that drives an all N-channel power MOSFET stage. Synchronous...
Datasheet
LTC7804 on Analog.com
LT1633
Production
The LT1632/LT1633 have excellent DC precision over the full range of operation. Input offset voltage is typically less than 400µV and the minimum open...
Datasheet
LT1633 on Analog.com
LTC3856
Recommended for New Designs
The LTC3856 is a single output, dual channel PolyPhase synchronous step-down DC/DC controller that drives all N-channel power MOSFET stages. This device...
Datasheet
LTC3856 on Analog.com
LT6100
Production
The LT6100 is a complete micropower, precision, high side current sense amplifier. The LT6100 monitors unidirectional currents via the voltage across an...
Datasheet
LT6100 on Analog.com
LTC4126-ADJ
Recommended for New Designs
The LTC4126-ADJ is a low-power wireless single-cell Li-Ion battery charger with an integrated step-down DC/DC regulator. The step-down regulator is a low...
Datasheet
LTC4126-ADJ on Analog.com
LT1882
Production
The LT1881 and LT1882 op amps bring high accuracy input performance to amplifiers with rail-to-rail output swing. Input bias currents and capacitive load...
Datasheet
LT1882 on Analog.com
LTC2624
Production
The LTC2604/LTC2614/LTC2624 are quad 16-,14- and 12-bit 2.5V to 5.5V rail-to-rail voltage output DACs in 16-lead narrow SSOP packages. These parts have...
Datasheet
LTC2624 on Analog.com
LTM4686B
Recommended for New Designs
The LTM4686B is a dual 14A (17A peak) or single 28A (34A peak) step-down μModule® (micromodule) DC/ DC regulator with 39ms turn-on time. It features...
Datasheet
LTM4686B on Analog.com
LTC2241-12
Production
The LTC2241-12 is a 210Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2241-12 is perfect...
Datasheet
LTC2241-12 on Analog.com
LT1227
Production
The LT1227 is a current feedback amplifier with wide bandwidth and excellent video characteristics. The low differential gain and phase, wide bandwidth...
Datasheet
LT1227 on Analog.com
LT3746
Production
The LT3746 integrates a 32-channel LED driver with a 55V buck controller. The LED driver lights up to 30mA/13V of LEDs in series per channel, and the buck...
Datasheet
LT3746 on Analog.com
LT3695
Production
The LT3695 series are adjustable frequency (250kHz to 2.2MHz) monolithic buck switching regulators that accept input voltages up to 36V and can safely...
Datasheet
LT3695 on Analog.com
LTC3892
Recommended for New Designs
The LTC3892/LTC3892-1/LTC3892-2 is a high performance dual step-down DC/DC switching regulator controller that drives all N-channel synchronous power MOSFET...
Datasheet
LTC3892 on Analog.com
LTC2156-12
Production
The LTC2157-12/LTC2156-12/LTC2155-12 are a family of dual 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2156-12 on Analog.com
LTC1982
Production
The LTC1981/LTC1982 are low-power, self-contained N-channel MOSFET drivers. An internal voltage tripler allows gates to be driven without the use of any...
Datasheet
LTC1982 on Analog.com
LTC1564
Production
The LTC1564 is a new type of continuous time filter for antialiasing, reconstruction and other band-limiting applications. No other analog components or...
Datasheet
LTC1564 on Analog.com
LTC2267-14
Production
The LTC2268-14/LTC2267-14/LTC2266-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2267-14 on Analog.com
LT1341
Production
The LT1341 is an advanced low power three-driver, five-receiver RS232 transceiver. Included on the chip is a shutdown pin for reducing supply current to...
Datasheet
LT1341 on Analog.com
LTC2274
Production
The LTC2274 is a 105Msps, 16-bit A/D converter with a high speed serial interface. It is designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2274 on Analog.com
LT1493
Production
The LT1492/LT1493 are dual/quad, low power, single supply precision op amps with 5MHz gain-bandwidth product, 3V/µs slew rate and only 450µA of quiescent...
Datasheet
LT1493 on Analog.com
LTC2268-12
Production
The LTC2268-12/LTC2267-12/LTC2266-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2268-12 on Analog.com
LT4250
Recommended for New Designs
The LT4250L/LT4250H are 8-pin, negative 48V Hot Swap™ controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current...
Datasheet
LT4250 on Analog.com
LTM4658
Recommended for New Designs
The LTM4658 is a complete 10A step-down switching mode μModule® regulator in tiny 4mm × 4mm × 4.32mm LGA and 4mm × 4mm × 4.62mm BGA packages. Included...
Datasheet
LTM4658 on Analog.com
LTC7131-1
Recommended for New Designs
The LTC7131-1 is a high efficiency, 25A monolithic synchronous buck regulator using a phase lockable controlled on-time, current mode architecture. The...
Datasheet
LTC7131-1 on Analog.com
LTC1753
Production
The LTC1753 is a high power, high efficiency switching regulator controller optimized for 5V input to a digitally programmable 1.3V-3.5V output. The internal...
Datasheet
LTC1753 on Analog.com
LTC1772B
Production
The LTC1772B is a constant frequency current mode step-down DC/DC controller providing excellent AC and DC load and line regulation. The device incorporates...
Datasheet
LTC1772B on Analog.com
LT1365
Production
The LT1364/LT1365 are dual and quad high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply...
Datasheet
LT1365 on Analog.com
LTC2918
Production
The LTC2917-A/LTC2917-B and LTC2918-A/LTC2918-B are low voltage single-supply monitors with selectable thresholds and an adjustable watchdog timer. The...
Datasheet
LTC2918 on Analog.com
LTC3526-2
Production
The LTC3526-2/LTC3526B-2 are synchronous, fixed frequency step-up DC/DC converters with output disconnect. Synchronous rectification enables high efficiency...
Datasheet
LTC3526-2 on Analog.com
LTC3554
Recommended for New Designs
The LTC3554 family are micropower, highly integrated power management and battery charger ICs for single-cell Li-Ion/Polymer battery applications. They...
Datasheet
LTC3554 on Analog.com
LT8609S
Recommended for New Designs
The LT8609S is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of non-switching quiescent...
Datasheet
LT8609S on Analog.com
LTC4401
Obsolete
The LTC4401-1 is a SOT-23 RF power controller for slow turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. The loop bandwidth is set at...
Datasheet
LTC4401 on Analog.com
LTC6115
Recommended for New Designs
The LTC6115 is a versatile combination of a high voltage, high side current sense amplifier and a voltage sense amplifier. Design flexibility is provided...
Datasheet
LTC6115 on Analog.com
LTC3541-3
Production
The LTC3541-3 combines a synchronous buck DC/DC converter with a very low dropout linear regulator (VLDO™regulator) and internal feedback resistor networks...
Datasheet
LTC3541-3 on Analog.com
LTC2617
Production
The LTC2607/LTC2617/LTC2627 are dual 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 12-lead DFN package. They have built-in high...
Datasheet
LTC2617 on Analog.com
LT3513
Production
The LT3513 5-output adjustable switching regulator provides power for large TFT-LCD panels. The 38-pin 5mm × 7mm QFN device can generate a 3.3V or 5V...
Datasheet
LT3513 on Analog.com
LTC485
Production
The LTC485 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common...
Datasheet
LTC485 on Analog.com
LTC3370
Recommended for New Designs
The LTC3370 is a highly flexible multioutput power supply IC. The device includes four synchronous buck converters, configured to share eight 1A power...
Datasheet
LTC3370 on Analog.com
LT3597
Recommended for New Designs
The LT3597 is a 60V triple step-down LED driver capable of achieving 10,000:1 digital PWM dimming at 100Hz with fast NPN current sources driving up to...
Datasheet
LT3597 on Analog.com
LTC2389-18
Production
The LTC2389-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2389-18 supports...
Datasheet
LTC2389-18 on Analog.com
LTC4001
Production
The LTC4001 is a 2A Li-Ion battery charger intended for 5V wall adapters. It utilizes a 1.5MHz synchronous buck converter topology to reduce power dissipation...
Datasheet
LTC4001 on Analog.com
LT6018
Recommended for New Designs
The LT6018 is a 33V precision operational amplifier with excellent noise performance. With 0.1Hz to 10Hz noise of only 30nVP-P, the LT6018 is an outstanding...
Datasheet
LT6018 on Analog.com
LTC4245
Last Time Buy
The LTC4245 Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane in multiple supply systems such as CompactPCI and...
Datasheet
LTC4245 on Analog.com
LTC4310
Production
The LTC4310 provides bidirectional I2C communications between two I2C buses whose grounds are isolated from one another. Each LTC4310 encodes I2C bus logic...
Datasheet
LTC4310 on Analog.com
LTC4373
Recommended for New Designs
The LTC4372/LTC4373 are positive high voltage ideal diode controllers that drive an external N-channel MOSFET to replace a Schottky diode. They control...
Datasheet
LTC4373 on Analog.com
LT1812
Production
The LT1812 is a low power, high speed, very high slew rate operational amplifier with excellent DC performance. The LT1812 features reduced supply current...
Datasheet
LT1812 on Analog.com
LT4293
Recommended for New Designs
The LT4293 is an LTPoE++/IEEE 802.3af/at/bt-compliant powered device (PD) interface controller. The T2P output distinguishes between LTPoE++ and IEEE 802...
Datasheet
LT4293 on Analog.com
LTC3865
Production
The LTC3865/LTC3865-1 are high performance dual synchronous step-down DC/DC switching regulator controllers that drive all N-channel synchronous power...
Datasheet
LTC3865 on Analog.com
LT3086
Recommended for New Designs
The LT3086 is a multi-feature, low dropout, low noise 2.1A linear regulator that operates over a 1.4V to 40V input supply range. Dropout voltage at 2.1A...
Datasheet
LT3086 on Analog.com
LT1468
Production
The LT1468 is a precision high speed operational amplifier with 16-bit accuracy and 900ns settling to 150µV for 10V signals. This unique blend of precision...
Datasheet
LT1468 on Analog.com
LTC2324-12
Production
The LTC2324-12 is a low noise, high speed quad 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2324-12 on Analog.com
LT3935
Recommended for New Designs
The LT3935 is a monolithic, synchronous, step-down DC/DC converter that utilizes fixed-frequency, peak current control and provides PWM dimming for a string...
Datasheet
LT3935 on Analog.com
LTC3611
Production
The LTC3611 is a high efficiency, monolithic synchronous step-down DC/DC converter that can deliver up to 10A output current from a 4.5V to 32V (36V maximum...
Datasheet
LTC3611 on Analog.com
LT3020
Recommended for New Designs
The LT3020 is a very low dropout voltage (VLDO™) linear regulator that operates from input supplies down to 0.9V. This device supplies 100mA of output...
Datasheet
LT3020 on Analog.com
LTM4650-1
Recommended for New Designs
The LTM4650-1A/LTM4650-1B is dual 25A or single 50A output step-down µModule® (power module) regulator with ±0.8% (LTM4650-1A) and ±1.5% (LTM4650-1B...
Datasheet
LTM4650-1 on Analog.com
LTC3548-1
Obsolete
The LTC3548-1 is a dual, fixed output, constant-frequency, synchronous step-down DC/DC converter. Intended for low power applications, it operates from...
Datasheet
LTC3548-1 on Analog.com
LT1777
Production
The LT1777 is a Buck (step-down) regulator designed for noise sensitive applications. It contains a dI/dt limiting circuit programmed via a small external...
Datasheet
LT1777 on Analog.com
LTM4600HV
Production
The LTM4600HV is a complete 10A, DC/DC step down power supply with up to 28V input operation. Included in the package are the switching controller, power...
Datasheet
LTM4600HV on Analog.com
LTC4081
Production
The LTC4081is a complete constant-current/constantvoltage linear battery charger for a single-cell 4.2V lithium-ion/polymer battery with an integrated...
Datasheet
LTC4081 on Analog.com
LTC3576
Production
The LTC3576/LTC3576-1 are highly integrated power management and battery charger ICs for Li-Ion/Polymer battery applications. They each include a high...
Datasheet
LTC3576 on Analog.com
LTC1660
Production
The 8-bit LTC1665 and 10-bit LTC1660 integrate eight accurate, serially addressable digital-to-analog converters (DACs) in tiny 16-pin narrow SSOP packages...
Datasheet
LTC1660 on Analog.com
LTM4608A
Production
The LTM4608A is a complete 8A switch mode DC/DC power supply with ±1.75% total output voltage error. Included in the package are the switching controller...
Datasheet
LTM4608A on Analog.com
LTC2668
Production
The LTC2668 is a family of 16-channel, 16-/12-bit ±10V digital-to-analog converters with integrated precision references. They are guaranteed monotonic...
Datasheet
LTC2668 on Analog.com
LT1585-1.5
Production
The LT1585-1.5/LT1585A-1.5 are low dropout, 3-terminal regulators with 4.6A and 5A output current capability respectively, and a fixed 1.5V output voltage...
Datasheet
LT1585-1.5 on Analog.com
LT4320
Recommended for New Designs
The LT4320/LT4320-1 are ideal diode bridge controllers that drive four N-channel MOSFETs, supporting voltage rectification from DC to 600Hz typical. By...
LT4320 on Analog.com
LT1965
Recommended for New Designs
The LT1965 series are low noise, low dropout linear regulators. The devices supply 1.1A of output current with a 310mV typical dropout voltage. Operating...
Datasheet
LT1965 on Analog.com
LTC2378-18
Production
The LTC2378-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2378-18 has...
Datasheet
LTC2378-18 on Analog.com
LT1308A
Production
The LT1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions...
Datasheet
LT1308A on Analog.com
LTC4283
Recommended for New Designs
The LTC4283 negative voltage hot swap controller drives an external N-channel MOSFET to allow a board to be safely inserted and removed from a live backplane...
Datasheet
LTC4283 on Analog.com
LT6370
Recommended for New Designs
The LT6370 is a gain programmable, high precision instrumentation amplifier that delivers industry leading DC precision. This high precision enables smaller...
Datasheet
LT6370 on Analog.com
LTC1556
Production
The LTC1555/LTC1556 provide power conversion and level shifting needed for 3V GSM cellular telephones to interface with either 3V or 5V Subscriber Identity...
Datasheet
LTC1556 on Analog.com
LTC1478
Production
The LTC1477/LTC1478 protected high side switches provide extremely low RDS(ON) switching with built-in protection against short-circuit and thermal overload...
Datasheet
LTC1478 on Analog.com
LTC2254
Production
The LTC2255/LTC2254 are 14-bit 125Msps/105Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2255...
Datasheet
LTC2254 on Analog.com
LT3485
Production
The LT3485 family of photoflash chargers are highly integrated ICs containing complete charger and IGBT drive functions. The patented control technique...
Datasheet
LT3485 on Analog.com
LTC4050
Production
The LTC4050-4.1/LTC4050-4.2 are complete standalone constant-current/constant-voltage linear charge controllers for lithium-ion (Li-Ion) batteries. Charge...
Datasheet
LTC4050 on Analog.com
LT1399
Production
LT1399HV is a higher voltage version of the LT1399. The LT1398 is a two amplifier version of the LT1399.
The LT1398/LT1399 operate on all supplies from...
Datasheet
LT1399 on Analog.com
LT3761
Production
The LT3761/LT3761-1 is a DC/DC controller designed to operate as a constant-current source and constant-voltage regulator. It features a programmable internal...
Datasheet
LT3761 on Analog.com
LTC2123
Production
The LTC2123 is a 2-channel simultaneous sampling 250Msps 14-bit A/D converter with serial JESD204B outputs. It is designed for digitizing high frequency...
Datasheet
LTC2123 on Analog.com
LTM8045
Recommended for New Designs
The LTM8045 is a µModule® (power module) DC/DC converter that can be configured as a SEPIC or inverting converter by simply grounding the appropriate output...
Datasheet
LTM8045 on Analog.com
LTC3738
Production
The LTC3738 is a 3-phase synchronous step-down switching regulator controller that drives all N-channel external power MOSFET stages in a phase-lockable...
Datasheet
LTC3738 on Analog.com
LTM2892
Production
The LTM2892 is a complete galvanic digital μModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power...
Datasheet
LTM2892 on Analog.com
LT1931
Production
The LT1931/LT1931A are the industry’s highest power inverting SOT-23 current mode DC/DC converters. Both parts include a 1A integrated switch allowing...
Datasheet
LT1931 on Analog.com
LTC1922-1
Production
The LTC1922-1 phase shift PWM controller provides all of the control and protection functions necessary to implement a high performance, zero voltage switched...
Datasheet
LTC1922-1 on Analog.com
LTC2348-18
Production
The LTC2348-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode...
Datasheet
LTC2348-18 on Analog.com
LTC3565
Production
The LTC3565 is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input...
Datasheet
LTC3565 on Analog.com
LT3651-4.1
Recommended for New Designs
The LT3651 is a 1 cell 4A Li-Ion/Polymer battery charger that operates with input voltages up to 32V. An efficient monolithic average current mode synchronous...
Datasheet
LT3651-4.1 on Analog.com
LTC3809-1
Production
The LTC3809-1 is a synchronous step-down switching regulator controller that drives external complementary power MOSFETs using few external components...
Datasheet
LTC3809-1 on Analog.com
LTC4261
Production
The LTC4261/LTC4261-2 negative voltage Hot Swap™ controllers allow a board to be safely inserted and removed from a live backplane. Using an external N...
Datasheet
LTC4261 on Analog.com
LTC3335
Recommended for New Designs
The LTC3335 is a high efficiency, low quiescent current (680nA) buck-boost DC/DC converter with an integrated precision coulomb counter which monitors...
Datasheet
LTC3335 on Analog.com
LT1511
Production
The LT1511 current mode PWM battery charger is the simplest, most efficient solution to fast charge modern rechargeable batteries including lithium-ion...
Datasheet
LT1511 on Analog.com
LTC5100
Production
The LTC5100 is a 3.2Gbps VCSEL driver offering an unprecedented level of integration and high speed performance. The part incorporates a full range of...
Datasheet
LTC5100 on Analog.com
LT1370
Production
The LT1370 is a monolithic high frequency current mode switching regulator. It can be operated in all standard switching configurations including boost...
Datasheet
LT1370 on Analog.com
LTC4370
Recommended for New Designs
The LTC4370 is a two-supply current sharing controller which incorporates MOSFET ideal diodes. The diodes block reverse and shoot-through currents during...
Datasheet
LTC4370 on Analog.com
LTC6947
Last Time Buy
The LTC6947 is a high performance, low noise, 6GHz phase-locked loop (PLL), including a reference divider, phase-frequency detector (PFD), ultralow noise...
LTC6947 on Analog.com
LT1722
Production
The LT1722/LT1723/LT1724 are single/dual/quad, low noise, low power, high speed operational amplifiers. These products feature lower input offset voltage...
Datasheet
LT1722 on Analog.com
LTC4065L
Production
The LTC4065L is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion batteries. Its small size and ability to accurately...
Datasheet
LTC4065L on Analog.com
LT3099
Recommended for New Designs
The LT3099Â is a high-performance, low-dropout
negative linear regulator featuring Analog Devices,
Inc.’s ultralow noise and ultrahigh power-supply
rejection...
Datasheet
LT3099 on Analog.com
LTC5562
Recommended for New Designs
The LTC5562 is a versatile low power mixer optimized for applications requiring wide input bandwidth, low distortion and low LO leakage. This mixer can...
Datasheet
LTC5562 on Analog.com
LT1304
Production
The LT1304 is a micropower step-up DC/DC converter ideal for use in small, low voltage, battery-operated systems. The devices operate from a wide input...
Datasheet
LT1304 on Analog.com
LTM4675
Recommended for New Designs
The LTM4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 40ms turn-on time. It features remote configurability and...
Datasheet
LTM4675 on Analog.com
LTC1446
Production
The LTC1446/LTC1446L are dual 12-bit digital-to-analog converters (DACs) available in an SO-8 package. They are complete with a rail-to-rail voltage output...
Datasheet
LTC1446 on Analog.com
LTC3827
Production
The LTC3827 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant frequency...
Datasheet
LTC3827 on Analog.com
LTC1745
Production
The LTC1745 is a 25Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1745 on Analog.com
LT1219L
Production
The LT1218/LT1219 are bipolar op amps which combine rail-to-rail input and output operation with precision specifications. Unlike other rail-to-rail amplifiers...
Datasheet
LT1219L on Analog.com
LT3007
Recommended for New Designs
The LT3007 series are micropower, low dropout voltage (LDO) linear regulators. The devices supply 20mA output current with a dropout voltage of 300mV....
Datasheet
LT3007 on Analog.com
LTC1148
Production
The LTC1148 series is a family of synchronous stepdown switching regulator controllers featuring automatic Burst Mode™ operation to maintain high efficiencies...
Datasheet
LTC1148 on Analog.com
LTC2903-1
Production
The LTC2903-1 monitors up to four supply voltages. The common reset output remains low until all four inputs have been in compliance for 200ms. Voltage...
Datasheet
LTC2903-1 on Analog.com
LTC2874
Production
The LTC2874 provides a rugged, 4-port IO-Link power and communications interface to remote devices connected by cables up to 20m in length.
Output supply...
Datasheet
LTC2874 on Analog.com
LTM2883
Production
The LTM2883 is a complete galvanic 6-channel digital μModule® (micromodule) isolator. No external components are required. A single 3.3V or 5V supply...
Datasheet
LTM2883 on Analog.com
LTM4709
Recommended for New Designs
The LTM4709 is a low voltage, triple 3A μModule linear regulator offering a high power supply rejection ratio (PSRR), ultralow noise, and ultrafast transient...
Datasheet
LTM4709 on Analog.com
LTC2328-18
Production
The LTC2328-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2328-18 on Analog.com
LT1309
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1309 is a 500kHz micropower DC/DC converter for Flash...
Datasheet
LT1309 on Analog.com
LT1361
Production
The LT1361/LT1362 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower...
Datasheet
LT1361 on Analog.com
LTC1428-50
Production
The LTC1428-50 is a micropower 8-bit current sink output D/A converter (DAC) with an output range of 0µA to 50µA. In 3.3V or 5V systems, the DAC IOUT pin...
Datasheet
LTC1428-50 on Analog.com
LTC3775
Production
The LTC3775 is a high efficiency synchronous step-down switching DC/DC controller that drives an all N-channel power MOSFET stage from a 4.5V to 38V input...
Datasheet
LTC3775 on Analog.com
LTC3543
Production
The LTC3543 is a high efficiency monolithic synchronous current mode buck regulator.
The switching frequency is internally set at 2.25MHz, allowing the...
Datasheet
LTC3543 on Analog.com
LTC3708
Production
The LTC3708 is a dual, 2-phase synchronous step-down switching regulator with output voltage up/down tracking capability. The IC allows either coincident...
Datasheet
LTC3708 on Analog.com
LTC4226
Production
The LTC4226 dual Hot Swap™ controller allows two power paths to be safely inserted and removed from a live backplane or powered connector. Using N-channel...
Datasheet
LTC4226 on Analog.com
LTM4620
Production
The LTM4620 is a complete dual 13A output switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductors...
Datasheet
LTM4620 on Analog.com
LTC4098-3.6
Recommended for New Designs
The LTC4098-3.6 is a high efficiency USB PowerPath controller and full-featured LiFePO4 battery charger. It seamlessly manages power distribution from...
Datasheet
LTC4098-3.6 on Analog.com
LT1372
Production
The LT1372/LT1377 are monolithic high frequency switching regulators. They can be operated in all standard switching configurations including boost, buck...
Datasheet
LT1372 on Analog.com
LTC3735
Production
The LTC3735 is a 2-phase synchronous step-down switching regulator controller that drives all N-channel power MOSFETs in a constant frequency architecture...
Datasheet
LTC3735 on Analog.com
LTC2935
Production
The LTC2935 ultra-low power voltage monitor provides system initialization, power-fail warning and reset generation functions. Low quiescent current (500nA...
Datasheet
LTC2935 on Analog.com
LTC4001-1
Production
The LTC4001-1 is a 2A Li-Ion battery charger intended for 5V wall adapters. It utilizes a 1.5MHz synchronous buck converter topology to reduce power dissipation...
Datasheet
LTC4001-1 on Analog.com
LTC4417
Recommended for New Designs
The LTC4417 connects one of three valid power supplies to a common output based on priority. Priority is defined by pin assignment, with V1 assigned the...
Datasheet
LTC4417 on Analog.com
LT1248
Production
The LT1248 provides active power factor correction for universal off-line power systems. By using fixed high frequency PWM current averaging, without the...
Datasheet
LT1248 on Analog.com
LTM8063
Recommended for New Designs
The LTM8063 is a 40VIN, 2A continuous, 2.5A peak, step-down µModule® (power module) regulator. Included in the package are the switching controller, power...
Datasheet
LTM8063 on Analog.com
LTC4355
Recommended for New Designs
The LTC4355 is a positive voltage ideal diode-OR controller that drives two external N-channel MOSFETs. Forming the diode-OR with N-channel MOSFETs instead...
Datasheet
LTC4355 on Analog.com
LTC2376-20
Production
The LTC2376-20 is a low noise, low power, high speed 20-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2376-20 has...
Datasheet
LTC2376-20 on Analog.com
LTC2145-12
Production
The LTC2145-12/LTC2144-12/LTC2143-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2145-12 on Analog.com
LTC2175-14
Production
The LTC2175-14/LTC2174-14/LTC2173-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2175-14 on Analog.com
LT3791-1
Production
The LT3791-1 is a synchronous 4-switch buck-boost voltage/current regulator controller. The controller can regulate output voltage, output current, or...
Datasheet
LT3791-1 on Analog.com
LTM4678
Recommended for New Designs
The LTM4678 is a dual 25A or single 50A step-down µModule® (power module) DC/DC regulator featuring remote configurability and telemetry-monitoring of...
Datasheet
LTM4678 on Analog.com
LTC2344-16
Production
The LTC2344-16 is a 16-bit, low noise 4-channel simulta- neous sampling successive approximation register (SAR) ADC with differential, wide common mode...
Datasheet
LTC2344-16 on Analog.com
LTC3559
Production
The LTC3559/LTC3559-1 are USB battery chargers with dual high efficiency buck regulators. The parts are ideally suited to power single-cell Li-Ion/Polymer...
Datasheet
LTC3559 on Analog.com
LTC2379-18
Production
The LTC2379-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2379-18 has...
Datasheet
LTC2379-18 on Analog.com
LTM9011-14
Production
The LTM9011-14/LTM9010-14/LTM9009-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9011-14 on Analog.com
LTC1433
Production
The LTC1433/LTC1434 are monolithic pulse width modulated step-down DC/DC converters. By utilizing current mode switching techniques, they provide excellent...
Datasheet
LTC1433 on Analog.com
LTM2810
Recommended for New Designs
The LTM2810 is a complete galvanic digital µModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power...
Datasheet
LTM2810 on Analog.com
LTC3109
Recommended for New Designs
The LTC3109 is a highly integrated DC/DC converter ideal for harvesting surplus energy from extremely low input voltage sources such as TEGs (thermoelectric...
Datasheet
LTC3109 on Analog.com
LTC2752
Production
The LTC2752 is a dual 16-bit multiplying serial-input, current-output digital-to-analog converter. It operates from a single 3V to 5V supply and is guaranteed...
Datasheet
LTC2752 on Analog.com
LTM4626
Recommended for New Designs
The LTM4626 is a complete 12A step-down switching mode µModule (micromodule) regulator in a tiny 6.25mm × 6.25mm × 3.87mm BGA package. Included in the...
Datasheet
LTM4626 on Analog.com
LT1243
Production
The LT1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry...
Datasheet
LT1243 on Analog.com
LTC2383-16
Production
The LTC2383-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2383-16 has...
Datasheet
LTC2383-16 on Analog.com
LTC2249
Production
The LTC2249 is a 14-bit 80Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2249 is perfect for...
Datasheet
LTC2249 on Analog.com
LTC1647
Production
The LTC1647-1/LTC1647-2/LTC1647-3 are dual Hot Swap™ controllers that permit a board to be safely inserted and removed from a live backplane.
Using external...
Datasheet
LTC1647 on Analog.com
LT1237
Production
The LT1237 is an advanced low power three driver, five receiver RS232 transceiver. Included on the chip is a shutdown pin for reducing supply current near...
Datasheet
LT1237 on Analog.com
LTC3733
Production
The LTC3733 family are PolyPhase® synchronous stepdown switching regulator controllers that drive all N-channel external power MOSFET stages in a phase...
Datasheet
LTC3733 on Analog.com
LTC4217
Recommended for New Designs
The LTC4217 is an integrated solution for Hot Swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates...
Datasheet
LTC4217 on Analog.com
LTC2174-12
Production
The LTC2175-12/LTC2174-12/LTC2173-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2174-12 on Analog.com
LT1169
Production
The LT1169 achieves a new standard of excellence in noise performance for a dual JFET op amp. For the first time low voltage noise (6nV/rtHz) is simultaneously...
Datasheet
LT1169 on Analog.com
LTC2497
Production
The LTC2497 is a 16-channel (eight differential), 16-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling...
Datasheet
LTC2497 on Analog.com
LT3478
Production
The LT3478/LT3478-1 are 4.5A step-up DC/DC converters designed to drive LEDs with a constant current over a wide programmable range. Series connection...
Datasheet
LT3478 on Analog.com
LTC9111
Recommended for New Designs
The LTC9111 is an IEEE 802.3cg compliant Single-Pair Power over Ethernet (SPoE) Powered Device (PD) controller. A wide 2.3V to 60V operating range capability...
Datasheet
LTC9111 on Analog.com
LTC1778
Production
The LTC1778 is a synchronous stepdown switching regulator controller optimized for CPU power. The controller uses a valley current control architecture...
Datasheet
LTC1778 on Analog.com
LT1074
Production
The LT1074 is a 5A (LT1076 is rated at 2A) monolithic bipolar switching regulator which requires only a few external parts for normal operation. The power...
Datasheet
LT1074 on Analog.com
LTC1429
Obsolete
Obsolete - Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LTC1429 is a switched-capacitor voltage inverter...
Datasheet
LTC1429 on Analog.com
LT1739
Production
TheLT1739 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily...
Datasheet
LT1739 on Analog.com
LT1319
Obsolete
Obsolete - Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1319 is a general purpose building block that...
Datasheet
LT1319 on Analog.com
LT6657
Production
The LT6657 is a precision voltage reference that combines robust operating characteristics with extremely low drift and low noise. With advanced curvature...
Datasheet
LT6657 on Analog.com
LTC1742
Production
The LTC1742 is an 65Msps, sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1742 on Analog.com
LT3492
Production
The LT3492 is a triple output DC/DC converter designed to operate as a constant-current source and is ideal for driving LEDs. The LT3492 works in buck...
Datasheet
LT3492 on Analog.com
LT3090
Recommended for New Designs
The LT3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards...
Datasheet
LT3090 on Analog.com
LTC3536
Recommended for New Designs
The LTC3536 is an extended VIN range, fixed frequency, synchronous buck-boost DC/DC converter that operates from input voltages above, below or equal to...
Datasheet
LTC3536 on Analog.com
LT3761A
Production
The LT3761A is a DC/DC controller designed to operate as a constant-current source and constant-voltage regulator. It features a programmable internal...
Datasheet
LT3761A on Analog.com
LTC5590
Production
The LTC5590 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The...
Datasheet
LTC5590 on Analog.com
LTC6561
Recommended for New Designs
The LTC6561 is a low-noise four-channel, transimpedance amplifier (TIA)with 220MHz bandwidth. The LTC6561 multi-channel transimpedance amplifier’s low...
Datasheet
LTC6561 on Analog.com
LTC2248
Production
The LTC2248/LTC2247/LTC2246 are 14-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2248 on Analog.com
LT8350S
Recommended for New Designs
The LT8350S is a monolithic 4-switch synchronous
buck-boost converter with second-generation Silent
Switcher architecture to minimize electromagnetic
interference...
Datasheet
LT8350S on Analog.com
LTC5510
Production
The LTC5510 is a high linearity mixer optimized for applications requiring very wide input bandwidth, low distortion, and low LO leakage. The chip includes...
Datasheet
LTC5510 on Analog.com
LTC1045
Production
The LTC1045 is a hex level translator manufactured using an enhanced LTCMOS™ silicon gate process. It consists of six high speed comparators with output...
Datasheet
LTC1045 on Analog.com
LT6703
Production
The LT6703-2/LT6703-3/LT6703HV-2/LT6703HV-3 combine a micropower, low voltage comparator with a 400mV reference in a tiny DFN package. Operating with supplies...
Datasheet
LT6703 on Analog.com
LTC3128
Recommended for New Designs
The LTC3128 is a highly efficient, buck-boost DC/DC supercapacitor charger. It operates efficiently from input voltages above, below or equal to the output...
Datasheet
LTC3128 on Analog.com
LT3724
Production
The LT3724 is a DC/DC controller used for medium power, low part count, low cost, high efficiency supplies. It offers a wide 4V-60V input range (7.5V minimum...
Datasheet
LT3724 on Analog.com
LTC6104
Recommended for New Designs
The LTC6104 is a versatile, high voltage, high side, bidirectional current sense amplifier. Design flexibility is provided by the excellent device characteristics...
Datasheet
LTC6104 on Analog.com
LTC2378-20
Production
The LTC2378-20 is a low noise, low power, high speed 20-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2378-20 has...
Datasheet
LTC2378-20 on Analog.com
LTC2233
Production
The LTC2232 and LTC2233 are 105Msps/80Msps, sampling 10-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2232...
Datasheet
LTC2233 on Analog.com
LTC1608
Production
The LTC1608 is a 500ksps, 16-bit sampling A/D converter that draws only 270mW from ±5V supplies. This high performance device includes a high dynamic range...
Datasheet
LTC1608 on Analog.com
LTC4252B-1
Recommended for New Designs
The LTC4252 negative voltage Hot Swapâ„¢ controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled...
Datasheet
LTC4252B-1 on Analog.com
LTC1404
Production
The LTC1404 is a complete 600ksps, 12-bit A/D converter which draws only 75mW from a 5V or ±5V supplies. This easy-to-use device comes complete with a...
Datasheet
LTC1404 on Analog.com
LT5521
Production
The LT5521 is a very high linearity mixer optimized for low distortion and low LO leakage applications. The chip includes a high speed LO buffer with single...
Datasheet
LT5521 on Analog.com
LTC3306
Recommended for New Designs
The LTC3306 is a very small, high efficiency, low noise, monolithic synchronous step-down DC/DC converter capable of providing as much as 1.75A average...
Datasheet
LTC3306 on Analog.com
LT3837
Production
The LT3837 is an isolated switching regulator controller designed for medium power flyback topologies. A typical application is 10W to 60W with the part...
Datasheet
LT3837 on Analog.com
LTC6605-10
Last Time Buy
The LTC6605-10 contains two independent, fully differential amplifiers configured as matched 2nd order 10MHz lowpass filters. The f–3dB of the filters...
LTC6605-10 on Analog.com
LT1171
Production
The LT1170/LT1171/LT1172 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck,...
Datasheet
LT1171 on Analog.com
LTC3568
Production
The LTC3568 is a constant frequency, synchronous step- down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input...
Datasheet
LTC3568 on Analog.com
LTC7883
Recommended for New Designs
The LTC7883 is a quad, PolyPhase DC/DC synchronous step-down switching regulator controller with PMBus compliant serial interface. It uses a constant frequency...
Datasheet
LTC7883 on Analog.com
LTM4618
Production
The LTM4618 is a complete 6A output switch mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor and all...
Datasheet
LTM4618 on Analog.com
LTC2234
Production
The LTC2234 is a 135Msps, sampling 10-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2234 is perfect for...
Datasheet
LTC2234 on Analog.com
LTC3311
Recommended for New Designs
The LTC3311/LTC3311-X is a very small, low noise, monolithic step-down DC/DC converter capable of providing up to 12.5A of output current from a 2.25V...
Datasheet
LTC3311 on Analog.com
LTC1337
Production
The LTC1337 is a 3-driver/5-receiver RS232 transceiver with very low supply current. In the no load condition, the supply current is only 300µA. The charge...
Datasheet
LTC1337 on Analog.com
LTC1258
Production
The LTC1258/LTC1258-2.5/LTC1258-3/LTC1258-4.1/LTC1258-5 are micropower bandgap references that combine high accuracy and low drift with very low supply...
Datasheet
LTC1258 on Analog.com
LTC3406-1.2
Production
The LTC3406-1.2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during...
Datasheet
LTC3406-1.2 on Analog.com
LT1802
Production
The LT1801/LT1802 are dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance. The LT1801/LT1802...
Datasheet
LT1802 on Analog.com
LTC1434
Obsolete
The LTC1433/LTC1434 are monolithic pulse width modulated step-down DC/DC converters. By utilizing current mode switching techniques, they provide excellent...
Datasheet
LTC1434 on Analog.com
LTC1704
Production
The LTC1704/LTC1704B include a high power synchronous switching regulator controller plus a linear regulator controller. The switching regulator controller...
Datasheet
LTC1704 on Analog.com
LT1173
Production
The LT1173 is a versatile micropower DC-DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. Supply...
Datasheet
LT1173 on Analog.com
LTC3851-1
Production
The LTC3851-1 is a high performance synchronous step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A...
Datasheet
LTC3851-1 on Analog.com
LT3694
Production
The LT3694/LT3694-1 are monolithic, current mode DC/DC converters with dual, low dropout regulator controllers. The switching converter is a step-down...
Datasheet
LT3694 on Analog.com
LTC2191
Production
The LTC2192/LTC2191/LTC2190 are 2-channel, simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2191 on Analog.com
LTC1751
Production
The LTC1751 family are micropower charge pump DC/DC converters that produce a regulated output voltage at up to 100mA. The input voltage range is 2V to...
Datasheet
LTC1751 on Analog.com
LT1635
Production
The LT1635 is a new analog building block that includes a rail-to-rail output op amp, a precision reference and reference buffer. The device operates from...
Datasheet
LT1635 on Analog.com
LTC2847
Production
The LTC2847 is a 3-driver/3-receiver multiprotocol transceiver with on-chip cable termination. When combined with the LTC2845, this chip set forms a complete...
Datasheet
LTC2847 on Analog.com
LT1468-2
Recommended for New Designs
The LT1468-2 is a precision high speed operational amplifier with 16-bit accuracy, decompensated to be stable in a gain of 2 or greater. The combination...
Datasheet
LT1468-2 on Analog.com
LTC1164-6
Production
The LTC1164-6 is a monolithic 8th order elliptic lowpass filter featuring clock-tunable cutoff frequency and low power supply current. Low power operation...
Datasheet
LTC1164-6 on Analog.com
LTC1658
Production
The LTC1658 is a single supply, rail-to-rail voltage output, 14-bit digital-to-analog converter (DAC) in an 8-lead MSOP package. It includes an output...
Datasheet
LTC1658 on Analog.com
LTC6241
Production
The LTC6240/6241/LTC6242 are single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input...
Datasheet
LTC6241 on Analog.com
LT1396
Production
The LT1395/LT1396/LT1397 are single/dual/quad 400MHz current feedback amplifiers with an 800V/µs slew rate and the ability to drive up to 80mA of output...
Datasheet
LT1396 on Analog.com
LTC6103
Recommended for New Designs
The LTC6103 is a versatile, high voltage, high side, dual current sense amplifier. The two internal amplifiers are independent except that they share the...
Datasheet
LTC6103 on Analog.com
LT6118
Recommended for New Designs
The LT6118 is a complete high side current sense device that incorporates a precision current sense amplifier, an integrated voltage reference and a latching...
Datasheet
LT6118 on Analog.com
LTC1543
Production
The LTC1543 is a 3-driver/3-receiver multiprotocol transceiver that operates from a single 5V supply. The LTC1543 and LTC1544 form the core of a complete...
Datasheet
LTC1543 on Analog.com
LTC4040
Recommended for New Designs
The LTC4040 is a complete 3.5V to 5.5V supply rail battery backup system. It contains a high current step-up DC/DC regulator to back up the supply from...
Datasheet
LTC4040 on Analog.com
LTC1436A
Production
The LTC1436A/LTC1437A are synchronous step-down switching regulator controllers that drive external N-channel power MOSFETs in a phase lockable, fixed...
Datasheet
LTC1436A on Analog.com
LTC4011
Production
The LTC4011 provides a complete, cost-effective nickel battery fast charge solution in a small package using few external components. A 550kHz PWM current...
Datasheet
LTC4011 on Analog.com
LTC1232
Production
The LTC1232 provides power supply monitoring, watchdog timing and external reset for microprocessor systems. A precise internal voltage reference and comparator...
Datasheet
LTC1232 on Analog.com
LT5579
Production
The LT5579 mixer is a high performance upconverting mixer optimized for frequencies in the 1.5GHz to 3.8GHz range. The single-ended LO input and RF output...
Datasheet
LT5579 on Analog.com
LTC2302
Production
The LTC2302/LTC2306 are low noise, 500ksps, 1-/2-channel, 12-bit ADCs with an SPI/MICROWIRE compatible serial interface. These ADCs include a fully differential...
Datasheet
LTC2302 on Analog.com
LTC3720
Production
The LTC3720 is a synchronous step-down switching regulator controller for CPU power. An output voltage between 1.05V and 1.825V is selected by a 5-bit...
Datasheet
LTC3720 on Analog.com
LTC2610
Production
The LTC2600/LTC2610/LTC2620 are octal 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP and 20-lead 4mm × 5mm QFN...
Datasheet
LTC2610 on Analog.com
LTC4070
Production
The LTC4070 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. The 450nA to 50mA operating...
Datasheet
LTC4070 on Analog.com
LTC1663
Production
The LTC1663 is a 10-bit voltage output DAC with true buffered rail-to-rail output voltage capability. It operates from a single supply with a range of...
Datasheet
LTC1663 on Analog.com
LT3489
Production
The LT3489 is a ?xed frequency step-up DC/DC converter containing an internal 2.5A, 40V switch. The LT3489 is ideal for large TFT-LCD panel power supplies...
Datasheet
LT3489 on Analog.com
LTC3261
Recommended for New Designs
The LTC3261 is a high voltage inverting charge pump that operates over a wide 4.5V to 32V input range and is capable of delivering up to 100mA of output...
Datasheet
LTC3261 on Analog.com
LT1962
Recommended for New Designs
The LT1962 series are micropower, low noise, low dropout regulators. The devices are capable of supplying 300mA of output current with a dropout voltage...
Datasheet
LT1962 on Analog.com
LTC3446
Production
The LTC3446 combines a synchronous buck DC/DC converter with two very low dropout (VLDO) linear regulators to provide up to three stepped-down output voltages...
Datasheet
LTC3446 on Analog.com
LTM8078
Recommended for New Designs
The LTM8078 is 40VIN, dual 1.4A/single 2.8A step-down Silent Switcher μModule® regulator. The Silent Switcher
architecture minimizes EMI while delivering...
Datasheet
LTM8078 on Analog.com
LT83201
Recommended for New Designs
The LT®83201 synchronous step-down regulator is
uniquely designed to combine an ultra-low noise reference
with Silent Switcher architecture to achieve...
Datasheet
LT83201 on Analog.com
LTM4657
Recommended for New Designs
The LTM4657 is a complete 8A step-down switching mode µModule (micromodule) regulator in a tiny 6.25mm × 6.25mm × 3.87mm BGA package. Included in the package...
Datasheet
LTM4657 on Analog.com
LTC3779
Recommended for New Designs
The LTC3779 is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3779 on Analog.com
LTC2453
Production
The LTC2453 is an ultra-tiny, fully differential, 16-bit, analog-to-digital converter. The LTC2453 uses a single 2.7V to 5.5V supply and communicates through...
Datasheet
LTC2453 on Analog.com
LT3954
Production
The LT3954 is a DC/DC converter designed to operate as a constant-current source and constant-voltage regulator. It features an internal low side N-channel...
Datasheet
LT3954 on Analog.com
LTM4659
Production
The LTM®4659 is a complete 10A step-down switch-ing
mode μModule® regulator in a tiny 4mm × 4mm ×
1.43mm LGA package. The package includes the switching...
Datasheet
LTM4659 on Analog.com
LTC1530
Production
The LTC1530 is a high power synchronous switching regulator controller optimized for 5V to 1.3V-3.5V output applications. Its synchronous switching architecture...
Datasheet
LTC1530 on Analog.com
LTC6811-1
Production
The LTC6811 is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1.2mV...
LTC6811-1 on Analog.com
LT3905
Production
The LT3905 is a fixed frequency current-mode step-up converter designed to bias avalanche photodiodes (APD) in optical receivers. The LT3905 features high...
Datasheet
LT3905 on Analog.com
LT1117
Production
The LT1117 is a positive low dropout regulator designed to provide up to 800mA of output current. The device is available in an adjustable version and...
Datasheet
LT1117 on Analog.com
LTC3601
Production
The LTC3601 is a high efficiency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of...
Datasheet
LTC3601 on Analog.com
LT1181A
Production
The LT1180A/LT1181A are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits...
Datasheet
LT1181A on Analog.com
LT6233
Production
The LT6233/LT6234/LT6235 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.9nV/vHz noise voltage and draw only...
Datasheet
LT6233 on Analog.com
LTC2158-12
Not Recommended for New Designs
The LTC2158-12 is a 2-channel simultaneous sampling 310Msps 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It...
Datasheet
LTC2158-12 on Analog.com
LT3080
Recommended for New Designs
The LT3080 is a 1.1A low dropout linear regulator that can be paralleled to increase output current or spread heat in surface mounted boards. Architected...
Datasheet
LT3080 on Analog.com
LTC4009
Production
The LTC4009 is a constant-current/constant-voltage battery charger controller. It uses a synchronous quasiconstant frequency PWM control architecture that...
Datasheet
LTC4009 on Analog.com
LTC2221
Production
The LTC2220 and LTC2221 are 170Msps/135Msps, sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2220...
Datasheet
LTC2221 on Analog.com
LTC2368-24
Production
The LTC2368-24 is a low noise, low power, high speed 24-bit successive approximation register (SAR) ADC with an integrated digital averaging filter. Operating...
Datasheet
LTC2368-24 on Analog.com
LTC4449
Production
The LTC4449 is a high frequency gate driver that is designed to drive two N-Channel MOSFETs in a synchronous DC/DC converter. The powerful rail-to-rail...
Datasheet
LTC4449 on Analog.com
LTC6803-4
Production
The LTC6803 is a 2nd generation, complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer...
Datasheet
LTC6803-4 on Analog.com
LTC2938
Production
The LTC2938/LTC2939 are con?gurable supply monitors for systems with up to four or six supply voltages that need watchdog supervision. One of sixteen preset...
Datasheet
LTC2938 on Analog.com
LTC1861
Production
The LTC1860/LTC1861 are 12-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 5V supply. At 250ksps, the supply current...
Datasheet
LTC1861 on Analog.com
LT1789
Production
The LT1789-1/LT1789-10 are micropower, precision instrumentation amplifiers that are optimized for single supply operation from 2.2V to 36V. The quiescent...
Datasheet
LT1789 on Analog.com
LTC1041
Production
The LTC1041 is a monolithic CMOS BANG-BANG controller manufactured using Linear Technology’s enhanced LTCMOS™ silicon gate process. BANG-BANG loops are...
Datasheet
LTC1041 on Analog.com
LTM8026
Recommended for New Designs
The LTM8026 is a 36VIN, 5A constant-voltage, constant-current (CVCC) step-down µModule® (power module) regulator. Included in the package are the switching...
Datasheet
LTM8026 on Analog.com
LT1056
Production
The LT1055/LT1056 JFET input operational amplifiers combine precision specifications with high speed performance.
For the first time, 16V/µs slew rate...
Datasheet
LT1056 on Analog.com
LTC2917
Production
The LTC2917-A/LTC2917-B and LTC2918-A/LTC2918-B are low voltage single-supply monitors with selectable thresholds and an adjustable watchdog timer. The...
Datasheet
LTC2917 on Analog.com
LTC3873-5
Production
The LTC3873-5 is a constant frequency current mode controller for boost, flyback or SEPIC DC/DC converters designed to drive an N-channel MOSFET for high...
Datasheet
LTC3873-5 on Analog.com
LT4295
Recommended for New Designs
The LT4295 is an IEEE 802.3af/at/bt-compliant powered device (PD) interface controller with a switching regulator controller. The T2P output indicates...
Datasheet
LT4295 on Analog.com
LT3782A
Production
The LT3782A is a current mode 2-phase step-up DC/DC converter controller. Its high switching frequency (up to 500kHz) and 2-phase operation reduce system...
Datasheet
LT3782A on Analog.com
LTC2000A
Production
The LTC2000A is a family of 16-/14-/11-bit 2.7Gsps current steering DACs with exceptional spectral purity.
The single (1.35Gsps mode) or dual (2.7Gsps...
Datasheet
LTC2000A on Analog.com
LTM9006-14
Production
The LTM9008-14/LTM9007-14/LTM9006-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9006-14 on Analog.com
LTC2421
Production
The LTC2421/LTC2422 are 1- and 2-channel 2.7V to 5.5V micropower 20-bit analog-to-digital converters with an integrated oscillator, 8ppm INL and 1.2ppm...
Datasheet
LTC2421 on Analog.com
LT3598
Recommended for New Designs
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be...
Datasheet
LT3598 on Analog.com
LTC1598L
Production
The LTC1594L/LTC1598L are 3V micropower, 12-bit sampling A/D converters that feature 4- and 8-channel multiplexers, respectively. They typically draw only...
Datasheet
LTC1598L on Analog.com
LTC1517-3.3
Production
The LTC1517-3.3 is a micropower charge pump DC/DC converter that produces a regulated 3.3V output. The input voltage range is 2V to 4.4V, allowing a single...
Datasheet
LTC1517-3.3 on Analog.com
LT1230
Last Time Buy
The LT1229/LT1230 dual and quad 100MHz current feedback amplifiers are designed for maximum performance in small packages. Using industry standard pinouts...
Datasheet
LT1230 on Analog.com
LTC1091
Production
The high impedance analog inputs and the ability to operate with reduced spans (below 1V full scale) allow direct connection to sensors and transducers...
Datasheet
LTC1091 on Analog.com
LTC2315-12
Production
The LTC2315-12 is a 12-bit, 5Msps, serial sampling A/D converter that draws only 6.4mA from a wide range analog supply adjustable from 2.7V to 5.25V. The...
Datasheet
LTC2315-12 on Analog.com
LTC3530
Recommended for New Designs
The LTC3530 is a wide VIN range, highly efficient, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal...
Datasheet
LTC3530 on Analog.com
LT3467A
Production
The LT3467/LT3467A switching regulators combine a 42V, 1.1A switch with a soft-start function. Pin compatible with the LT1930, its low VCESAT bipolar switch...
Datasheet
LT3467A on Analog.com
LTC1426
Obsolete
The LTC1426 is a dual micropower 6-bit PWM DAC featuring versatile PWM outputs and a flexible pushbutton compatible digital interface. The DAC outputs...
Datasheet
LTC1426 on Analog.com
LTC1867L
Production
The LTC1863L/LTC1867L are pin compatible, 8-channel 12-/16-bit A/D converters with serial I/O and an internal reference.
The 8-channel input multiplexer...
Datasheet
LTC1867L on Analog.com
ltc6993-1
Production
The LTC6993 is a monostable multivibrator (also known as a “one-shot†pulse generator) with a programmable pulse width of 1µs to 33.6 seconds. The...
Datasheet
ltc6993-1 on Analog.com
LTC1291
Production
The LTC1291 is a data acquisition system that contains a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor technology...
Datasheet
LTC1291 on Analog.com
LTC4304
Production
The LTC4304 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection...
Datasheet
LTC4304 on Analog.com
LT3021
Recommended for New Designs
The LT3021 is a very low dropout voltage (VLDO™) linear regulator that operates from input supplies down to 0.9V. This device supplies 500mA of output...
Datasheet
LT3021 on Analog.com
LTC1565-31
Production
The LTC1565-31 is a 7th order, continuous time, linear phase lowpass filter. The selectivity of the LTC1565-31, combined with its linear phase and dynamic...
Datasheet
LTC1565-31 on Analog.com
LTM8054
Recommended for New Designs
The LTM8054 is a 36VIN, buck-boost µModule®
(micromodule) regulator. Included in the package are the
switching controller, power switches, inductor and...
Datasheet
LTM8054 on Analog.com
LTC3550-1
Production
The LTC3550-1 is a standalone linear charger with a 600mA monolithic synchronous buck converter. It is capable of charging a single-cell Li-Ion battery...
Datasheet
LTC3550-1 on Analog.com
LTC2415
Production
The LTC2415/LTC2415-1 are micropower 24-bit differential ?S analog to digital converters with integrated oscillator, 2ppm INL, 0.23ppm RMS noise and a...
Datasheet
LTC2415 on Analog.com
LTC5582
Production
The LTC5582 is a 40MHz to 10GHz RMS responding power detector. It is capable of accurate power measurement of an AC signal with wide dynamic range, from...
Datasheet
LTC5582 on Analog.com
LTC1262
Production
The LTC1262 is a regulated 12V, 30mA output DC/DC converter. It is designed to provide the 12V ±5% output necessary to program byte-wide flash memories...
Datasheet
LTC1262 on Analog.com
LTC3850-2
Production
The LTC3850-2 is a high performance dual synchronous step-down switching regulator controller that drives all N-channel power MOSFET stages. A constant...
Datasheet
LTC3850-2 on Analog.com
LT3512
Production
The LT3512 is a high voltage monolithic switching regulator specifically designed for the isolated flyback topology. No third winding or opto-isolator...
Datasheet
LT3512 on Analog.com
LTC2228
Production
The LTC2228/LTC2227/LTC2226 are 12-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2228 on Analog.com
LT8740-225
Recommended for New Designs
The LT8740-225 is a two-channel programmable device power supply (DPS) with very high efficiency, integration, and performance. The part consists of two...
Datasheet
LT8740-225 on Analog.com
LTC1728
Production
The LTC1727 is a triple supply monitor intended for systems with multiple supply voltages. Each supply monitor has its own open-drain output for individual...
Datasheet
LTC1728 on Analog.com
LTC3218
Production
The LTC3218 is a low-noise, high-current charge pump DC/DC converter capable of driving high current LEDs at up to 400mA from a 2.9V to 4.5V input. A low...
Datasheet
LTC3218 on Analog.com
LT1351
Production
The LT1351 is a low power, high speed, high slew rate operational amplifier with outstanding AC and DC performance. The LT1351 features lower supply current...
Datasheet
LT1351 on Analog.com
LTC1757A
Obsolete
The LTC1757A-2 is a dual band RF power controller for RF power amplifiers operating in the 850MHz to 2GHz range. The LTC1757A is pin compatible with the...
Datasheet
LTC1757A on Analog.com
LT117A
Not Recommended for New Designs
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Analog Devices Are Now Obsolete
The LT117A Series are 3-terminal positive adjustable voltage...
Datasheet
LT117A on Analog.com
LTC6951
Last Time Buy
The LTC6951 is a high performance, low noise, Phase Locked Loop (PLL) with a fully integrated VCO. The low noise VCO uses no external components and is...
LTC6951 on Analog.com
LT1083-Fixed
Obsolete
The LT1083 series of positive adjustable regulators are designed to provide 3A, 5A and 7.5A with higher efficiency than currently available devices. All...
Datasheet
LT1083-Fixed on Analog.com
LT581X
Production
Datasheet
LT581X on Analog.com
LTC1384
Production
The LTC1384 is an ultra-low power 2-driver/2-receiver RS232 transceiver that operates from a single 5V supply. The charge pump requires only four space...
Datasheet
LTC1384 on Analog.com
LTC3607
Production
The LTC3607 is a 15V dual 600mA monolithic synchronous step-down regulator which has only 55µA quiescent current. Intended for a variety of applications...
Datasheet
LTC3607 on Analog.com
LTC1042
Production
The LTC1042 is a monolithic CMOS window comparator manufactured using Linear Technology’s enhanced LTCMOS™ silicon gate process. Two high impedance voltage...
Datasheet
LTC1042 on Analog.com
LT1585A-3.3
Production
The LT1585A/LT1585A-3.3 are low dropout 3-terminal regulators with 5A output current capability. Design has been optimized for low voltage applications...
Datasheet
LT1585A-3.3 on Analog.com
LT1158
Production
A single input pin on the LT1158 synchronously controls two N-channel power MOSFETs in a totem pole configuration. Unique adaptive protection against shoot...
Datasheet
LT1158 on Analog.com
LTC4211
Recommended for New Designs
The LTC4211 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal highside switch driver controls...
Datasheet
LTC4211 on Analog.com
LTC3803-5
Production
The LTC3803-5 is a constant frequency current mode flyback controller optimized for driving N-channel MOSFETs in high input voltage applications. The LTC3803...
Datasheet
LTC3803-5 on Analog.com
LTC2321-14
Production
The LTC2321-14 is a low noise, high speed dual 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2321-14 on Analog.com
LT1336
Production
The LT1336 is a cost effective half-bridge N-channel power MOSFET driver. The floating driver can drive the topside N-channel power MOSFETs operating off...
Datasheet
LT1336 on Analog.com
LTC3107
Not Recommended for New Designs
The LTC3107 is a highly integrated DC/DC converter designed to extend the life of a primary battery in low power wireless systems by harvesting and managing...
Datasheet
LTC3107 on Analog.com
LT1920
Production
The LT1920 is a low power, precision instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. The low voltage noise...
Datasheet
LT1920 on Analog.com
LTC4368
Recommended for New Designs
The LTC4368 protects applications from power supply voltages that may be too high, too low, or even negative and from overcurrent faults in both forward...
Datasheet
LTC4368 on Analog.com
LTC7001
Recommended for New Designs
The LTC7001 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 135V. It contains an internal charge pump that fully...
Datasheet
LTC7001 on Analog.com
LTC3424
Production
The LTC3423 and LTC3424 are high efficiency, fixed frequency, step-up DC/DC converters that can regulate output voltages as low as 1.5V from a single cell...
Datasheet
LTC3424 on Analog.com
LT8640A
Recommended for New Designs
The LT8640A step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency at frequencies...
Datasheet
LT8640A on Analog.com
LTC6806
Production
The LTC6806 is a fuel cell monitor that measures up to 144 Series Connected Fuel cells with a total measurement error of less than 15mV. The LTC6806 includes...
Datasheet
LTC6806 on Analog.com
LT8391A
Recommended for New Designs
The LT8391A is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage...
Datasheet
LT8391A on Analog.com
LT1089
Obsolete
OBSOLETE PRODUCT: Data Sheet For Reference Only.
The LT1089 is a logic driven, high current, high side switch utilizing bipolar technology. The device...
Datasheet
LT1089 on Analog.com
LTC4359
Recommended for New Designs
The LTC4359 is a positive high voltage ideal diode controller that drives an external N-channel MOSFET to replace a Schottky diode. It controls the forward...
Datasheet
LTC4359 on Analog.com
LT323A
Production
The "K" Package has been Obsoleted
The LT123A/LT323A is an improved version of the popular LM123/LM323 5 Volt, 3 Amp Regulator. These new devices offer...
Datasheet
LT323A on Analog.com
LTC6406
Last Time Buy
The LTC6406 is a very low noise, low distortion, fully differential input/output amplifier optimized for 3V, single supply operation. The LTC6406 input...
LTC6406 on Analog.com
LTC1051
Production
The LTC1051/LTC1053 are high performance, low cost dual/quad zero-drift operational amplifiers. The unique achievement of the LTC1051/LTC1053 is that they...
Datasheet
LTC1051 on Analog.com
LTC1273
Production
The LTC1273/LTC1275/LTC1276 are 300ksps, sampling 12-bit A/D converters that draw only 75mW from single 5V or ±5V supplies. These easy-to-use devices come...
Datasheet
LTC1273 on Analog.com
LTC3538
Recommended for New Designs
The LTC3538 is a highly efficient, low noise, buck-boost DC/DC converter that operates from input voltages above, below, and equal to the output voltage...
Datasheet
LTC3538 on Analog.com
LT1028
Production
The LT1028 (gain of –1 stable)/LT1128(gain of +1 stable) achieve a new standard of excellence in noise performance with 0.85nV/√Hz 1kHz noise, 1.0nV...
Datasheet
LT1028 on Analog.com
LTC4089-1
Production
The LTC4089-1 is a USB power manager plus high voltage Li-Ion battery charger. This device controls the total current used by the USB peripheral for operation...
Datasheet
LTC4089-1 on Analog.com
LTC2351-14
Production
The LTC2351-14 is a 14-bit, 1.5Msps ADC with six simultaneously sampled differential inputs. The device draws only 5.5mA from a single 3V supply, and comes...
Datasheet
LTC2351-14 on Analog.com
LT8362
Recommended for New Designs
The LT8362 is a current mode DC/DC converter with a 60V, 2A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it...
Datasheet
LT8362 on Analog.com
LTC2256-12
Production
The LTC2258-12/LTC2257-12/LTC2256-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2256-12 on Analog.com
LT3491
Production
The LT3491 is a fixed frequency step-up DC/DC converter specifically designed to drive up to six white LEDs in series from a Li-Ion cell. Series connection...
Datasheet
LT3491 on Analog.com
LTC3524
Recommended for New Designs
The LTC3524 is an integrated BIAS and white LED power converter solution for small/medium-sized polysilicon thin ?lm transistor (TFT) liquid crystal (LCD...
Datasheet
LTC3524 on Analog.com
LT3957
Production
The LT3957 is a wide input range, current mode DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured...
Datasheet
LT3957 on Analog.com
LTC2145-14
Production
The LTC2145-14/LTC2144-14/LTC2143-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2145-14 on Analog.com
LTC2970
Recommended for New Designs
The LTC2970 is a dual power supply monitor and margining controller with an SMBus compatible I2C bus interface. A low-drift, on-chip reference and 14-bit...
Datasheet
LTC2970 on Analog.com
LT1942
Production
The LT1942 is a highly integrated quad switching regulator designed to provide all necessary power supply functions for TFT displays, including the white...
Datasheet
LT1942 on Analog.com
LTC6088
Recommended for New Designs
The LTC6087/LTC6088 are dual/quad, low noise, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifiers that feature 1pA of...
Datasheet
LTC6088 on Analog.com
LTC4270
Production
The LTC4270/LTC4271 chipset is a 12-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 1 and Type 2 (high power) compliant...
Datasheet
LTC4270 on Analog.com
LT5520
Production
The LT5520 mixer is designed to meet the high linearity requirements of wireless and cable infrastructure transmission applications. A high-speed, internally...
Datasheet
LT5520 on Analog.com
LT5581
Production
The LT5581 is a 10MHz to 6GHz, low power monolithic precision RMS power detector. The RMS detector uses a proprietary technique to accurately measure the...
Datasheet
LT5581 on Analog.com
LTC1099
Production
The LTC1099 is a high speed microprocessor compatible 8-bit analog-to-digital converter (A/D). An internal sample-and-hold (S/H) allows the A/D to convert...
Datasheet
LTC1099 on Analog.com
LTC2493
Production
The LTC2493 is a 4-channel (2-channel differential), 24-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling...
Datasheet
LTC2493 on Analog.com
LTM8024
Recommended for New Designs
The LTM8024 is 40VIN, dual 3.5A or single 7A step-down Silent Switcher µModule® regulator. The Silent Switcher architecture minimizes EMI while delivering...
Datasheet
LTM8024 on Analog.com
LTC2325-14
Production
The LTC2325-14 is a low noise, high speed quad 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2325-14 on Analog.com
LTM4620A
Production
The LTM4620A is a complete dual 13A, or single 26A output switching mode DC/DC power supply with wider VOUT range and higher efficiency than the LTM4620...
Datasheet
LTM4620A on Analog.com
LTC2311-12
Production
The LTC2311-12 is a low noise, high speed 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2311-12 on Analog.com
LTC1655
Production
The LTC1655/LTC1655L are rail-to-rail voltage output, 16-bit digital-to-analog converters in an SO-8 package. They include an output buffer and a reference...
Datasheet
LTC1655 on Analog.com
LTC1411
Production
The LTC1411 is a 2.5Msps sampling 14-bit A/D converter in a 36-pin SSOP package, which typically dissipates only 195mW from a single 5V supply. This device...
Datasheet
LTC1411 on Analog.com
LT9890
Recommended for New Designs
The LT9890 is a high-precision current monitor with an internal
current-sense element supporting up to 150 A of load current.
Factory calibration of the...
Datasheet
LT9890 on Analog.com
LTC1062
Production
The LTC1062 is a 5th order all pole maximally flat lowpass filter with no DC error. Its unusual architecture puts the filter outside the DC path so DC...
Datasheet
LTC1062 on Analog.com
LT6211
Production
The LT6210/LT6211 are single/dual current feedback amplifiers with externally programmable supply current and bandwidth ranging from 10MHz at 300µA per...
Datasheet
LT6211 on Analog.com
LT3095
Production
The LT3095 generates two low-noise bias supplies from a common input voltage ranging from 3V to 20V. Each channel includes a fixed frequency, peak current...
Datasheet
LT3095 on Analog.com
LTC2508-32
Production
The LTC2508-32 is a low noise, low power, high-performance 32-bit ADC with an integrated configurable digital filter. Operating from a single 2.5V supply...
Datasheet
LTC2508-32 on Analog.com
LT8210
Recommended for New Designs
The LT8210 is a 4-switch synchronous buck-boost DC/DC controller that can operate in passthru, forced continuous, pulse-skipping and Burst Mode® operation...
Datasheet
LT8210 on Analog.com
LTC3206
Production
The LTC3206 is a highly integrated multidisplay LED controller. The part contains a high efficiency, low noise fractional step-up/direct-connect charge...
Datasheet
LTC3206 on Analog.com
LTC1909-8
Production
The LTC1909-8 is a synchronous step-down switching regulator controller with a digitally programmable output voltage. The output voltage is selected from...
Datasheet
LTC1909-8 on Analog.com
LTC2150-14
Production
The LTC2152-14/LTC2151-14/LTC2150-14 are 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2150-14 on Analog.com
LT6203X
Recommended for New Designs
The LT6203X is a dual low noise, rail-to-rail input and output unity gain stable op amp that features 1.9nV/√Hz noise voltage and draws only 2.5mA of...
Datasheet
LT6203X on Analog.com
LT1039A
Production
The LT1039A is a triple RS232 driver/receiver that includes shutdown. Each receiver will accept up to ±30V input and can drive either TTL or CMOS logic...
Datasheet
LT1039A on Analog.com
LT3960
Recommended for New Designs
The LT3960 is a robust high speed transceiver that extends a single-master I2C bus through harsh or noisy environments at up to 400kbps using the CAN-physical...
Datasheet
LT3960 on Analog.com
LTC7003
Recommended for New Designs
The LTC7003 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 60V. It contains an internal charge pump that fully...
Datasheet
LTC7003 on Analog.com
LTC1609
Production
The LTC1609 is a 200ksps, serial sampling 16-bit A/D converter that draws only 65mW (typical) from a single 5V supply. This easy-to-use device includes...
Datasheet
LTC1609 on Analog.com
LTC3535
Recommended for New Designs
The LTC3535 is a dual channel, synchronous, fixed frequency step-up DC/DC converter with output disconnect. Extended battery life in single AA/AAA powered...
Datasheet
LTC3535 on Analog.com
LTC4052-4.2
Production
The LTC4052 is a complete standalone pulse charger with integrated MOSFET for 1-cell lithium-ion batteries.
An external sense resistor provides overcurrent...
Datasheet
LTC4052-4.2 on Analog.com
LTC4123
Recommended for New Designs
The LTC4123 is a low power wireless receiver and a constant-current/constant-voltage linear charger for NiMH batteries. An external programming resistor...
Datasheet
LTC4123 on Analog.com
LTC2333-16
Production
The LTC2333-16 is a 16-bit, low noise 8-channel multiplexed successive approximation register (SAR) ADC with buffered differential, wide common mode range...
Datasheet
LTC2333-16 on Analog.com
LT1941
Production
The LT1941 is a triple current mode DC/DC converter with internal power switches. Two of the regulators are step-down converters with 3A and 2A power switches...
Datasheet
LT1941 on Analog.com
LTC3427
Production
The LTC3427 is the industry’s first high efficiency, fixed frequency, step-up DC/DC converter with true output disconnect in a 6-lead 2mm × 2mm DFN package...
Datasheet
LTC3427 on Analog.com
LTC7103-1
Recommended for New Designs
The LTC7103-1 is a high efficiency, monolithic synchro-nous step-down DC/DC converter utilizing a constant frequency, average current mode control architecture...
Datasheet
LTC7103-1 on Analog.com
LT3741
Production
The LT3741 and LT3741-1 are fixed frequency synchronous step-down DC/DC controllers designed to accurately regulate the output current at up to 20A. The...
Datasheet
LT3741 on Analog.com
LTC1749
Production
The LTC1749 is an 80Msps, 12-bit A/D converter designed for digitizing wide dynamic range signals up to frequencies of 500MHz. The input range of the ADC...
Datasheet
LTC1749 on Analog.com
LT3573
Production
The LT3573 is a monolithic switching regulator specifically designed for the isolated flyback topology. No third winding or opto-isolator is required for...
Datasheet
LT3573 on Analog.com
LT1129
Production
The LT1129/LT1129-3.3/LT1129-5 are micropower low dropout regulators with shutdown. The devices are capable of supplying 700mA of output current with a...
Datasheet
LT1129 on Analog.com
LTC2472
Production
The LTC2470/LTC2472 are small, 16-bit analog-to-digital converters with an integrated precision reference and a selectable 208sps or 833sps output rate...
Datasheet
LTC2472 on Analog.com
LTC2369-18
Production
The LTC2369-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2369-18 has...
Datasheet
LTC2369-18 on Analog.com
LT3462
Production
The LT3462/LT3462A are general purpose fixed frequency current mode inverting DC/DC converters. Both devices feature an integrated Schottky and a low VCESAT...
Datasheet
LT3462 on Analog.com
LTC9102
Recommended for New Designs
The LTC®9101-2/LTC9102 chipset is a 12/24-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3bt Type 3 and 4 compliant Power...
Datasheet
LTC9102 on Analog.com
LT1818
Production
The LT1818/LT1819 are single/dual wide bandwidth, high slew rate, low noise and distortion operational amplifiers with excellent DC performance. The LT1818...
Datasheet
LT1818 on Analog.com
LTM2987
Recommended for New Designs
The LTM2987 is a 16-channel μModule® (micromodule) Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry...
Datasheet
LTM2987 on Analog.com
LTC3447
Production
The LTC3447 is a high efficiency monolithic synchronous current mode buck regulator. Using an I2C interface, the output voltage can be set between 0.69V...
Datasheet
LTC3447 on Analog.com
LTC2364-16
Production
The LTC2364-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2364-16 has...
Datasheet
LTC2364-16 on Analog.com
LTC3226
Recommended for New Designs
The LTC3226 is a 2-cell series supercapacitor charger with a backup PowerPath controller. It includes a charge pump supercapacitor charger with programmable...
Datasheet
LTC3226 on Analog.com
LTC4053-4.2
Production
The LTC4053 is a standalone linear charger for lithium-ion batteries that can be powered directly from a USB port. The IC contains an on-chip power MOSFET...
Datasheet
LTC4053-4.2 on Analog.com
LTC3731H
Production
The LTC3731H is a PolyPhase synchronous step-down switching regulator controller that drives all N-channel external power MOSFET stages in a phase-lockable...
Datasheet
LTC3731H on Analog.com
LTC2215
Production
The LTC2216/LTC2215 are 80Msps/65Msps sampling 16- bit A/D converters designed for digitizing high frequency, wide dynamic range signals with input frequencies...
Datasheet
LTC2215 on Analog.com
LTC6905-X
Production
The LTC6905-X series of parts are precision, fixed frequency, silicon oscillators designed to minimize board space while maximizing accuracy and ease of...
Datasheet
LTC6905-X on Analog.com
LTM4650A-1
Recommended for New Designs
The LTM4650A-1 is a dual 25A or single 50A output switching mode step-down DC/DC μModule® (micromodule) regulator with ±1% total DC output error. Included...
Datasheet
LTM4650A-1 on Analog.com
LT1077
Production
The LT1077 is a micropower precision operational amplifier optimized for single supply operation at 5V. In addition, ±15V specifications are provided....
Datasheet
LT1077 on Analog.com
LT8641A
Recommended for New Designs
The LT8641A step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency at frequencies...
Datasheet
LT8641A on Analog.com
LTC1519
Production
The LTC1518/LTC1519 are high speed, precision delay differential quad bus/line receivers that can operate at data rates as high as 52Mbps. They are pin...
Datasheet
LTC1519 on Analog.com
LT1367
Production
The LT1366/LT1367/LT1368/LT1369 are dual and quad bipolar op amps which combine rail-to-rail input and output operation with precision specifications....
Datasheet
LT1367 on Analog.com
LTC3879
Production
The LTC3879 is a synchronous step-down switching regulator controller optimized for high switching frequency and fast transient response. The constant...
Datasheet
LTC3879 on Analog.com
LT1203
Production
The LT1203 is a wideband 2-input video multiplexer designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured...
Datasheet
LT1203 on Analog.com
LTC3443
Production
The LTC3443 is a high efficiency, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3443 on Analog.com
LT1206
Production
The LT1206 is a current feedback amplifier with high output current drive capability and excellent video characteristics. The LT1206 is stable with large...
Datasheet
LT1206 on Analog.com
LTC4280
Recommended for New Designs
The LTC4280 Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, board...
Datasheet
LTC4280 on Analog.com
LTC3834-1
Production
The LTC3834-1 is a high performance step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A constant-frequency...
Datasheet
LTC3834-1 on Analog.com
LT1584
Production
The LT1584/LT1585/LT1587 are low dropout three terminal regulators with 7A, 4.6A and 3A output current capability, respectively. Design has been optimized...
Datasheet
LT1584 on Analog.com
LTM4661
Recommended for New Designs
The LTM4661 is a synchronous step-up switching mode µModule® (power module) regulator in a 6.25mm × 6.25mm × 2.42mm BGA package. Included in the package...
Datasheet
LTM4661 on Analog.com
LTC1981
Production
The LTC1981/LTC1982 are low-power, self-contained N-channel MOSFET drivers. An internal voltage tripler allows gates to be driven without the use of any...
Datasheet
LTC1981 on Analog.com
LTC3808
Production
The LTC3808 is a synchronous step-down switching regulator controller that drives external complementary power MOSFETs using few external components. The...
Datasheet
LTC3808 on Analog.com
LTC3836
Production
The LTC3836 is a 2-phase dual output synchronous step-down switching regulator controller with tracking that drives external N-channel power MOSFETs using...
Datasheet
LTC3836 on Analog.com
LTC6242
Production
The LTC6240/6241/LTC6242 are single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input...
Datasheet
LTC6242 on Analog.com
LTC3853
Production
The LTC3853 is a high performance triple output stepdown switching regulator controller that drives all Nchannel synchronous power MOSFET stages. Power...
Datasheet
LTC3853 on Analog.com
LTM2884
Production
The LTM2884 is a complete galvanically isolated USB 2.0 compatible µModule® (micromodule) transceiver. An upstream supply powers both sides of the interface...
Datasheet
LTM2884 on Analog.com
LT3503
Production
The LT3503 is a current mode PWM step-down DC/DC converter with an internal 1.45A power switch. The wide operating input range of 3.6V to 20V makes the...
Datasheet
LT3503 on Analog.com
LTC6702
Recommended for New Designs
The LTC6702 is an extremely small dual comparator designed to maximize battery life while providing both speed and low voltage operation in applications...
Datasheet
LTC6702 on Analog.com
LT7101
Recommended for New Designs
The LT7101 is a high efficiency, monolithic synchronous step-down DC/DC converter utilizing a constant frequency, average current mode control architecture...
Datasheet
LT7101 on Analog.com
LTM4650-2
Recommended for New Designs
The LTM®4650-2 is a dual 25A or single 50A output stepdown
μModule® (micromodule) regulator with ±1.5%
total DC output error. The package includes...
LTM4650-2 on Analog.com
LTC2381-16
Production
The LTC2381-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2381-16 has...
Datasheet
LTC2381-16 on Analog.com
LTC5800-IPM
Production
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTC5800...
Datasheet
LTC5800-IPM on Analog.com
LTC3577
Production
The LTC3577 is a highly integrated power management IC for single cell Li-Ion/Polymer battery applications. It includes a PowerPath manager with automatic...
Datasheet
LTC3577 on Analog.com
LT1192
Obsolete
The LT1192 is a video operational amplifier optimized for operation on ±5V and a single 5V supply. Unlike many high speed amplifiers, this amplifier features...
Datasheet
LT1192 on Analog.com
LT1712
Production
The LT1712 is a 4.5ns dual comparator featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized for 3V and 5V power...
Datasheet
LT1712 on Analog.com
LT6604-10
Recommended for New Designs
The LT6604-10 consists of two matched, fully differential amplifiers, each with a 4th order, 10MHz lowpass ?lter. The ?xed frequency lowpass ?lter approximates...
Datasheet
LT6604-10 on Analog.com
LTC2498
Production
The LTC2498 is a 16-channel (8-differential) 24-bit No Latency ?S™ ADC with Easy Drive technology. The patented sampling scheme eliminates dynamic input...
Datasheet
LTC2498 on Analog.com
LT1097
Production
LT1097 achieves a new standard in combining low price and outstanding precision performance.
On all operational amplifier data sheets, the specifications...
Datasheet
LT1097 on Analog.com
LT8495
Recommended for New Designs
The LT8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can...
Datasheet
LT8495 on Analog.com
LT1073
Production
The LT1073 is a versatile micropower DC/DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. The very...
Datasheet
LT1073 on Analog.com
LTC6902
Production
The LTC6902 is a precision, low power and easy-to-use oscillator that provides multiphase outputs in a small package. The oscillator frequency is set by...
Datasheet
LTC6902 on Analog.com
LT3497
Production
The LT3497 is a dual full function step-up DC/DC converter speci?cally designed to drive up to 12 white LEDs (6 white LEDs in series per converter) from...
Datasheet
LT3497 on Analog.com
LTC4401-2
Last Time Buy
The LTC4401-1 is a SOT-23 RF power controller for slow turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. The loop bandwidth is set at...
Datasheet
LTC4401-2 on Analog.com
LTC1843
Production
The LTC1843 is an ultralow power dual comparator with a built-in reference. The comparators feature less than 5.7µA supply current over temperature, a...
Datasheet
LTC1843 on Analog.com
LTC2367-16
Production
The LTC2367-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2367-16 has...
Datasheet
LTC2367-16 on Analog.com
LT7171
Recommended for New Designs
The LT7171/LT7171-1 are monolithic PolyPhase
DC/DC synchronous step-down regulators that deliver
up to 20A of continuous output current. The LT7171-1
option...
Datasheet
LT7171 on Analog.com
LTM8047
Recommended for New Designs
The LTM8047 is an isolated flyback µModule DC/DC converter. The LTM8047 has an isolation rating of 725VDC. For a similar product with LDO post regulator...
Datasheet
LTM8047 on Analog.com
LTM8055
Recommended for New Designs
The LTM8055 is a 36VIN, buck-boost µModule®
(micromodule) regulator. Included in the package are the
switching controller, power switches, inductor and...
Datasheet
LTM8055 on Analog.com
LTC2143-14
Production
The LTC2145-14/LTC2144-14/LTC2143-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2143-14 on Analog.com
LT3476
Production
The LT3476 is a quad output DC/DC converter designed to operate as a constant-current source for driving high current LEDs. A ?xed frequency, current mode...
Datasheet
LT3476 on Analog.com
LT4276
Recommended for New Designs
The LT4276 is a pin-for-pin compatible family of IEEE 802.3 and LTPoE++ Powered Device (PD) controllers. It includes an isolated switching regulator controller...
LT4276 on Analog.com
LTC4286
Recommended for New Designs
The LTC4286 is an integrated solution for hot-swap applications allowing a board to be safely inserted and removed from a live backplane. The circuit breaker...
Datasheet
LTC4286 on Analog.com
LTC2609
Production
The LTC2609/LTC2619/LTC2629 are quad 16-, 14- and 12- bit, 2.7V to 5.5V rail-to-rail voltage output DACs in a 16-lead SSOP package. They have built-in...
Datasheet
LTC2609 on Analog.com
LTC2240-12
Production
The LTC2240-12 is a 170Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2240-12 is perfect...
Datasheet
LTC2240-12 on Analog.com
LTC3564
Production
The LTC3564 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC3564 on Analog.com
LTC6082
Production
The LTC6081/LTC6082 are dual/quad low offset, low drift, low noise CMOS operational amplifiers with rail-to-rail input/output swing.
The 70µV maximum offset...
Datasheet
LTC6082 on Analog.com
LT6230
Production
The LT6230/LT6231/LT6232 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.1nV/vHz noise voltage and draw only...
Datasheet
LT6230 on Analog.com
LTM4606
Recommended for New Designs
The LTM4606 is a complete EN55022 Class B certified noise high voltage 6A switching mode DC/DC power supply. Included in the package are the switching...
Datasheet
LTM4606 on Analog.com
LTC7061
Recommended for New Designs
The LTC7061 drives two N-Channel MOSFETs in a half-bridge configuration with supply voltages up to 100V. Both high-side and low-side drivers can drive...
Datasheet
LTC7061 on Analog.com
LTC4240
Production
The LTC4240 is a Hot Swap™ controller that allows a board to be safely inserted and removed from a live CompactPCI bus slot. The LTC4240 has a built-in...
Datasheet
LTC4240 on Analog.com
LTC1539
Production
The LTC1538-AUX/LTC1539 are dual,synchronous step- down switching regulator controllers which drive external N-channel power MOSFETs in a phase-lockable...
Datasheet
LTC1539 on Analog.com
LT3757
Production
The LT3757/LT3757A are wide input range, current mode, DC/DC controllers which are capable of generating either positive or negative output voltages. They...
Datasheet
LT3757 on Analog.com
LTC2361
Production
The LTC2360/LTC2361/LTC2362 are 100ksps/250ksps/500ksps, 12-bit, sampling A/D converters that draw only 0.5mA, 0.75mA and 1.1mA, respectively, from a single...
Datasheet
LTC2361 on Analog.com
LT1776
Production
The LT1776 is a wide input range, high efficiency Buck (step-down) switching regulator. The monolithic die includes all oscillator, control and protection...
Datasheet
LT1776 on Analog.com
LTC2433-1
Production
The LTC2433-1 is a differential input micropower 16-bit No Latency ?STM analog-to-digital converter with an integrated oscillator. It provides 0.12LSB...
Datasheet
LTC2433-1 on Analog.com
LTC4008
Production
The LTC4008 is a constant-current/constant-voltage charger controller. The PWM controller uses a synchronous, quasi-constant frequency, constant off-time...
Datasheet
LTC4008 on Analog.com
LTC1338
Production
The LTC1338 is a 5-driver/3-receiver RS232 transceiver with very low supply current. In the no load condition, the supply current is only 500µA. The charge...
Datasheet
LTC1338 on Analog.com
LTM4641
Recommended for New Designs
The LTM4641 is a switch mode step-down DC/DC µModule® (power module) regulator with advanced input and load protection features. Trip detection thresholds...
Datasheet
LTM4641 on Analog.com
LTC4442
Production
The LTC4442 is a high frequency gate driver designed to drive two N-channel MOSFETs in a synchronous buck DC/DC converter topology. The powerful driver...
Datasheet
LTC4442 on Analog.com
LTC3225
Production
The LTC3225/LTC3225-1 are programmable supercapacitor chargers designed to charge two supercapacitors in series to a selectable fixed output voltage (4...
Datasheet
LTC3225 on Analog.com
LTC6085
Production
The LTC6084/LTC6085 are dual/quad, low cost, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifiers that feature 1pA of input...
Datasheet
LTC6085 on Analog.com
LT8697
Recommended for New Designs
The LT8697 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator designed to power 5V USB applications. A precise...
Datasheet
LT8697 on Analog.com
LT3668
Recommended for New Designs
The LT3668 is a monolithic triple power supply composed of a 400mA buck switching regulator and two 200mA low dropout linear tracking regulators (LDOs...
Datasheet
LT3668 on Analog.com
LTC1385
Production
The LTC1385 is an ultra-low power, 2-driver/2-receiver
EIA / TIA-562 transceiver which operates from a single
3.3V supply. The charge pump requires only...
Datasheet
LTC1385 on Analog.com
LTC1773
Production
The LTC1773 is a current mode synchronous buck regulator controller that drives external complementary power MOSFETs using a fixed frequency architecture...
Datasheet
LTC1773 on Analog.com
LTC3203
Production
The LTC3203/LTC3203-1/LTC3203B/LTC3203B-1 are low noise, high efficiency charge pump DC/DC converters capable of driving loads up to 500mA from a 2.7V...
Datasheet
LTC3203 on Analog.com
LTC4264
Production
The LTC4264 is an integrated Powered Device (PD) interface controller intended for IEEE 802.3af Power over Ethernet (PoE) and high power PoE applications...
Datasheet
LTC4264 on Analog.com
LT1781
Production
The LT1780/LT1781 are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. Using only 0...
Datasheet
LT1781 on Analog.com
LTC4010
Production
The LTC4010 provides a complete, cost-effective nickel battery fast charge solution in a small package using few external components. A 550kHz PWM current...
Datasheet
LTC4010 on Analog.com
LTM8073
Recommended for New Designs
The LTM8073 is a 60VIN, 3A (continuous) or 5A (peak) step-down Silent Switcher µModule® (power module) regulator. Included in the package are the switching...
Datasheet
LTM8073 on Analog.com
LTC1864L
Production
The LTC1864L/LTC1865L are 16-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 3V supply. At 150ksps, the supply current...
Datasheet
LTC1864L on Analog.com
LT3663
Production
The LT3663 is a current mode step-down switching regulator with programmable output current limit. The current limit accurately controls the system power...
Datasheet
LT3663 on Analog.com
LTC3217
Production
The LTC3217 is a low noise charge pump DC/DC converter designed to power four high current LEDs. The LTC3217 requires only four small ceramic capacitors...
Datasheet
LTC3217 on Analog.com
LTC1199
Production
The LTC1197/LTC1197L/LTC1199/LTC1199L are 10-bit A/D converters with sampling rates up to 500kHz. They have 2.7V (L) and 5V versions and are offered in...
Datasheet
LTC1199 on Analog.com
LTC6904
Production
The LTC6903/LTC6904 are low power self contained digital frequency sources providing a precision frequency from 1kHz to 68MHz, set through a serial port...
Datasheet
LTC6904 on Analog.com
LTC2286
Production
The LTC2288/LTC2287/LTC2286 are 10-bit 65Msps/ 40Msps/25Msps, low noise dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2286 on Analog.com
LT1236LS8
Production
The LT1236LS8 is a precision reference that combines low drift and noise with excellent long-term stability and high output accuracy. The reference output...
Datasheet
LT1236LS8 on Analog.com
LTC2258-14
Production
The LTC2258-14/LTC2257-14/LTC2256-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2258-14 on Analog.com
LTC3890-3
Recommended for New Designs
The LTC3890-3 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3890-3 on Analog.com
LTC3230
Production
The LTC3230 is a low noise charge pump DC/DC converter designed to drive 4 Main LEDs and 1 Sub LED, plus two 200mA linear regulators to provide additional...
Datasheet
LTC3230 on Analog.com
LT1216
Obsolete
The LT1215 is a dual, single supply precision op amp with a 23MHz gain-bandwidth product and a 50V/µs slew rate. The LT1216 is a quad version of the same...
Datasheet
LT1216 on Analog.com
LTC1986
Production
The LTC1986 is a micropower charge pump DC/DC converter that provides power for either 3V or 5V GSM SIM cards. It operates in one of three modes: VOUT...
Datasheet
LTC1986 on Analog.com
LT1432-3.3
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1432-3.3 is a control chip designed to operate with the...
Datasheet
LT1432-3.3 on Analog.com
LTC3630A
Recommended for New Designs
The LTC3630A is a high efficiency step-down DC/DC converter with internal high side and synchronous power switches that draws only 12μA typical DC supply...
Datasheet
LTC3630A on Analog.com
LTC3829
Recommended for New Designs
The LTC3829 is a high performance 3-phase single output synchronous step-down DC/DC switching controller that drives all N-channel synchronous power MOSFET...
Datasheet
LTC3829 on Analog.com
LTC3826-1
Production
The LTC3826-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3826-1 on Analog.com
LT3759
Production
The LT3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single...
Datasheet
LT3759 on Analog.com
LTC2460
Production
The LTC2460/LTC2462 are ultra tiny, 16-Bit analog-to-digital converters with an integrated precision reference. They use a single 2.7V to 5.5V supply and...
Datasheet
LTC2460 on Analog.com
LTM4702
Recommended for New Designs
The LTM4702 is a complete 8A step-down Silent Switcher® μModule® regulator in a tiny 6.25mm × 6.25mm × 5.07mm BGA package. Included in the package...
LTM4702 on Analog.com
LT3502
Production
The LT3502/LT3502A are current mode PWM step-down DC/DC converters with an internal 500mA power switch, in tiny 8-lead 2mm × 2mm DFN and 10-lead MS10 packages...
Datasheet
LT3502 on Analog.com
LT1720
Production
The LT1720/LT1721 are UltraFast™ dual/quad comparators optimized for single supply operation, with a supply voltage range of 2.7V to 6V. The input voltage...
Datasheet
LT1720 on Analog.com
LTC2291
Production
The LTC2293/LTC2292/LTC2291 are 12-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2291 on Analog.com
LT8333
Recommended for New Designs
The LT8333 is a current mode DC/DC converter with a 40V, 3A switch operating from a 2.8V to 40V input. With a unique single feedback pin architecture,...
Datasheet
LT8333 on Analog.com
LTC694-3.3
Production
The LTC694-3.3/LTC695-3.3 provide complete 3.3V power supply monitoring and battery control functions. These include power-on reset, battery back-up, RAM...
Datasheet
LTC694-3.3 on Analog.com
LT1496
Production
The LT1494/LT1495/LT1496 are the lowest power (IS = 1.5µA) op amps with precision specifications. The extremely low supply current is combined with excellent...
Datasheet
LT1496 on Analog.com
LT8672
Recommended for New Designs
The LT8672 is an active rectifier controller for reverse input protection. It drives an external N-channel MOSFET to replace a power Schottky diode. Its...
Datasheet
LT8672 on Analog.com
LTC9101-2B
Recommended for New Designs
The LTC®9101-2B/LTC9102 chipset is a 12-/24-/48-port power
sourcing equipment (PSE) controller designed for use in IEEE
802.3bt-compliant Type 3 2-pair...
Datasheet
LTC9101-2B on Analog.com
LTC2385-18
Production
The LTC2385-18 is a low noise, high speed, 18-bit 5Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2385-18 on Analog.com
LTC2392-16
Production
The LTC2392-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2392-16 supports...
Datasheet
LTC2392-16 on Analog.com
LTC1747
Production
The LTC1747 is an 80Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1747 on Analog.com
LTC1596
Production
The LTC1595/LTC1596/LTC1596-1 are serial input, 16-bit multiplying current output DACs. The LTC1595 is pin and hardware compatible with the 12-bit DAC8043...
Datasheet
LTC1596 on Analog.com
LTC3118
Recommended for New Designs
The LTC3118 is a dual-input, wide voltage range synchronous buck-boost DC/DC converter with an intelligent, integrated, low loss PowerPath control. The...
Datasheet
LTC3118 on Analog.com
LT8355-1
Recommended for New Designs
The LT8355-1 a dual-channel DC/DC controller designed to drive two strings of high current LEDs. The fixed frequency, current mode architecture results...
Datasheet
LT8355-1 on Analog.com
LTC3372
Recommended for New Designs
The LTC3372 is a highly flexible multioutput power supply IC. The device includes a high-performance, high voltage (HV) step-down DC/DC switching regulator...
Datasheet
LTC3372 on Analog.com
LTC6909
Production
The LTC6909 is an easy to use precision oscillator that can provide 1-, 2-, 3-, 4-, 5-, 6-, 7- or 8-phase synchronized outputs. The LTC6909 also offers...
Datasheet
LTC6909 on Analog.com
LTC1550L
Production
The LTC1550L/LTC1551L are switched capacitor charge pump voltage inverters which include internal linear post-regulators to minimize output ripple. The...
Datasheet
LTC1550L on Analog.com
LT8415
Production
The LT8415 is an ultralow power boost converter with two integrated complementary MOSFET half-bridges (N- and P-channel), integrated power switch, Schottky...
Datasheet
LT8415 on Analog.com
LTC7872
Recommended for New Designs
The LTC7872 is a high performance bidirectional buck or boost switching regulator controller that operates in either buck or boost mode on demand. It...
Datasheet
LTC7872 on Analog.com
LTC3882-1
Recommended for New Designs
The LTC3882-1/LTC3882-2 is a dual, PolyPhase DC/DC synchronous step-down switching regulator controller with PMBus compliant serial interface. It uses...
Datasheet
LTC3882-1 on Analog.com
LTC3644
Recommended for New Designs
The LTC3644/LTC3644-2 is a quad 1.25A output, high efficiency synchronous monolithic step-down regulator capable of operating from input supplies up to...
Datasheet
LTC3644 on Analog.com
LT1963A
Recommended for New Designs
The LT1963A series are low dropout regulators optimized for fast transient response. The devices are capable of supplying 1.5A of output current with a...
Datasheet
LT1963A on Analog.com
LTC3406B-2
Production
The LTC3406B-2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current with no...
Datasheet
LTC3406B-2 on Analog.com
LTC1059
Production
The LTC1059 consists of a general purpose, high performance, active filter building block and an uncommitted op amp. The filter building block together...
Datasheet
LTC1059 on Analog.com
LT6023
Recommended for New Designs
The LT6023 is a low power, enhanced slew rate, precision operational amplifier. The proprietary circuit topology of this amplifier gives excellent slew...
Datasheet
LT6023 on Analog.com
LTC2159
Production
The LTC2159 is a sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications...
Datasheet
LTC2159 on Analog.com
LT1674
Last Time Buy
The LT1672/LT1673/LT1674 are ultralow power (IS = 2µA) decompompensated (AV = 5) op amps with precision specifications. The extremely low supply current...
Datasheet
LT1674 on Analog.com
LTC3557
Production
The LTC3557/LTC3557-1 is a highly integrated power management and battery charger IC for single cell Li-Ion/Polymer battery applications. It includes a...
Datasheet
LTC3557 on Analog.com
LTM2985
Recommended for New Designs
The LTM2985 measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution...
Datasheet
LTM2985 on Analog.com
LTC2259-16
Production
The LTC2259-16 is a sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications...
Datasheet
LTC2259-16 on Analog.com
LT8612
Production
The LT8612 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 3µA of quiescent current....
Datasheet
LT8612 on Analog.com
LT1431
Production
The LT1431 is an adjustable shunt voltage regulator with 100mA sink capability, 0.4% initial reference voltage tolerance and 0.3% typical temperature stability...
Datasheet
LT1431 on Analog.com
LT1078
Production
The LT1078 is a micropower dual op amp in 8-pin packages including the small outline surface mount package. The LT1079 is a micropower quad op amp offered...
Datasheet
LT1078 on Analog.com
LTC3407-4
Production
The LTC3407-4 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 2.5V to 5.5V...
Datasheet
LTC3407-4 on Analog.com
LT6004
Recommended for New Designs
The LT6003/LT6004/LT6005 are single/dual/quad op amps designed to maximize battery life and performance for portable applications. These amplifiers operate...
Datasheet
LT6004 on Analog.com
LT1797
Production
The LT1797 is a unity-gain stable 10MHz op amp available in the small SOT-23 package that operates on all single and split supplies with a total voltage...
Datasheet
LT1797 on Analog.com
LTC1350
Production
The LTC1350 is a 3-driver/5-receiver EIA/TIA-562 transceiver with very low supply current. In the no load condition, the supply current is only 300µA....
Datasheet
LTC1350 on Analog.com
LT1212
Production
The LT1211 is a dual, single supply precision op amp with a 14MHz gain-bandwidth product and a 7V/µs slew rate. The LT1212 is a quad version of the same...
Datasheet
LT1212 on Analog.com
LTC3703-5
Production
The LTC3703-5 is a synchronous step-down switching regulator controller that can directly step-down voltages from up to 60V, making it ideal for telecom...
Datasheet
LTC3703-5 on Analog.com
LTC2301
Production
The LTC2301/LTC2305 are low noise, low power, 1-/2-channel, 12-bit successive approximation ADCs with an I2C compatible serial interface. These ADCs include...
Datasheet
LTC2301 on Analog.com
LTC3408
Production
The LTC3408 is a high efficiency monolithic synchronous buck regulator optimized for WCDMA power amplifier applications. The output voltage can be dynamically...
Datasheet
LTC3408 on Analog.com
LTC1272
Production
The LTC1272 is a 3µs, 12-bit, successive approximation sampling A/D converter. It has the same pinout as the industry standard AD7572 and offers faster...
Datasheet
LTC1272 on Analog.com
LTC4210-1
Recommended for New Designs
The LTC4210 is a 6-pin SOT-23 Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. An internal high side switch...
Datasheet
LTC4210-1 on Analog.com
LTC1408-12
Production
The LTC1408-12 is a 12-bit, 600ksps ADC with six simultaneously sampled differential inputs. The device draws only 5mA from a single 3V supply, and comes...
Datasheet
LTC1408-12 on Analog.com
LT1780
Production
The LT1780/LT1781 are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. Using only 0...
Datasheet
LT1780 on Analog.com
LTC3351
Recommended for New Designs
The LTC3351 is a backup power controller that charges and monitors a series stack of one to four supercapacitors. The LTC3351’s synchronous step-down...
Datasheet
LTC3351 on Analog.com
LTC4425
Recommended for New Designs
The LTC4425 is a constant-current/constant-voltage linear charger designed to charge a 2-cell supercap stack from either a Li-Ion/Polymer battery, a USB...
Datasheet
LTC4425 on Analog.com
LTC1688
Production
The LTC1688/LTC1689 are ultrahigh speed, differential bus/line drivers that can operate at data rates up to 100Mbps. Propagation delay is guaranteed at...
Datasheet
LTC1688 on Analog.com
LTC3705
Not Recommended for New Designs
The LTC3705 is a controller for a 2-switch forward converter and includes on-chip bottom and top gate drivers that do not require external transformers...
Datasheet
LTC3705 on Analog.com
LT3593
Production
The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical...
Datasheet
LT3593 on Analog.com
LTC1665
Production
The 8-bit LTC1665 and 10-bit LTC1660 integrate eight accurate, serially addressable digital-to-analog converters (DACs) in tiny 16-pin narrow SSOP packages...
Datasheet
LTC1665 on Analog.com
LTC3101
Recommended for New Designs
The LTC3101 is a complete power management solution for low power portable devices. It provides three high efficiency switching DC/DC converters which...
Datasheet
LTC3101 on Analog.com
LT1495
Production
The LT1494/LT1495/LT1496 are the lowest power (IS = 1.5µA) op amps with precision specifications. The extremely low supply current is combined with excellent...
Datasheet
LT1495 on Analog.com
LTC3534
Recommended for New Designs
The LTC3534 is a wide VIN range, highly efficient, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal...
Datasheet
LTC3534 on Analog.com
LTC4418
Recommended for New Designs
The LTC4418 connects one of two valid power supplies to a common output based on priority and validity. Priority is defined by pin assignment, with V1...
Datasheet
LTC4418 on Analog.com
LT5558
Last Time Buy
The LT5558 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation...
Datasheet
LT5558 on Analog.com
LTC2871
Production
The LTC2870/LTC2871 are robust pin-configurable multiprotocol transceivers, supporting RS232, RS485, and RS422 protocols, operating on a single 3V to 5...
Datasheet
LTC2871 on Analog.com
LT3797
Production
The LT3797 is a triple output DC/DC controller designed to drive three strings of LEDs. The fixed frequency, current mode architecture results in stable...
Datasheet
LT3797 on Analog.com
LT1567
Production
The LT1567 is an analog building block optimized for very low noise high frequency filter applications. It contains two wideband rail-to-rail operational...
Datasheet
LT1567 on Analog.com
LTC3525L-3
Recommended for New Designs
The LTC3525L-3 is a high efficiency synchronous step-up DC/DC converter with output disconnect that can start up with an input as low as 0.7V. It offers...
Datasheet
LTC3525L-3 on Analog.com
LT1944-1
Production
The LT1944-1 is a dual micropower step-up DC/DC converter in a 10-pin MSOP package. One converter is designed with a 100mA current limit and a 400ns off...
Datasheet
LT1944-1 on Analog.com
LTC6930
Production
The LTC6930 series is a family of very low power precision silicon oscillators with a frequency error less than 0.09%. For each oscillator, the user can...
Datasheet
LTC6930 on Analog.com
LTC1744
Production
The LTC1744 is a 50Msps, sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. Pin selectable input ranges...
Datasheet
LTC1744 on Analog.com
LTC6254
Last Time Buy
The LTC6252/LTC6253/LTC6254 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 3.5mA...
LTC6254 on Analog.com
LTM8060F
Recommended for New Designs
The LTM8060F is a quad 40VIN, 3A (4A peak) step-down Silent Switcher® power μModule® (micromodule) regulator with package-level Electromagnetic interference...
Datasheet
LTM8060F on Analog.com
LT1245
Production
The LT1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry...
Datasheet
LT1245 on Analog.com
LTC3805
Production
The LTC3805 is a current mode controller for flyback DC/DC converters designed to drive an N-channel MOSFET in high input and output voltage converter...
Datasheet
LTC3805 on Analog.com
LTC3815
Recommended for New Designs
The LTC3815 is a high efficiency, 6A monolithic synchronous buck regulator using a phase lockable controlled on-time, current mode architecture. The output...
Datasheet
LTC3815 on Analog.com
LTC2657
Production
The LTC2657 is a family of octal I2C 16-/12-Bit Rail-to-Rail DACs with Integrated 10ppm/°C Max Reference. The DACs have built-in high performance, rail...
Datasheet
LTC2657 on Analog.com
LTC2480
Production
The LTC2480 combines a 16-bit plus sign No Latency ?S™ analog-to-digital converter with patented Easy Drive™ technology. The patented sampling scheme eliminates...
Datasheet
LTC2480 on Analog.com
LTC3310S
Recommended for New Designs
The LTC3310S is a very small, low noise, monolithic step-down DC/DC converter capable of providing up to 10A of output current from a 2.25V to 5.5V input...
Datasheet
LTC3310S on Analog.com
LT1301
Production
The LT1301 is a micropower step-up DC/DC converter that utilizes Burst Mode™ operation. The device can deliver 5V or 12V from a two-cell battery input...
Datasheet
LT1301 on Analog.com
LT8610AC
Production
The LT8610AC/LT8610AC-1 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5µA of quiescent...
Datasheet
LT8610AC on Analog.com
LTC4095
Production
The LTC4095 is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/polymer batteries. Its small 2mm × 2mm DFN package...
Datasheet
LTC4095 on Analog.com
LT4180
Production
The LT4180 solves the problem of providing tight load regulation over long, highly resistive cables without requiring an additional pair of remote sense...
Datasheet
LT4180 on Analog.com
LTC1538-AUX
Production
The LTC1538-AUX/LTC1539 are dual, synchronous step-down switching regulator controllers which drive external N-channel power MOSFETs in a phase-lockable...
Datasheet
LTC1538-AUX on Analog.com
LTC7151S
Production
The LTC7151S is a high efficiency monolithic synchronous buck regulator capable of delivering 15A to the load. It uses a phase lockable controlled on-time...
Datasheet
LTC7151S on Analog.com
LTC2328-16
Production
The LTC2328-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC with pseudo-differential inputs. Operating from a single 5V...
Datasheet
LTC2328-16 on Analog.com
LTC4162-S
Recommended for New Designs
The LTC4162-S is an advanced monolithic synchronous step-down switching battery charger and PowerPathâ„¢ manager that seamlessly manages power distribution...
Datasheet
LTC4162-S on Analog.com
LTC2172-12
Production
The LTC2172-12/LTC2171-12/LTC2170-12 are 4-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2172-12 on Analog.com
LT6119
Recommended for New Designs
The LT6119 is a complete high side current sense device that incorporates a precision current sense amplifier, an integrated voltage reference and two...
Datasheet
LT6119 on Analog.com
LT3572
Production
The LT3572 is a highly integrated dual Piezo motor driver capable of driving two Piezo motors at up to 40V from a 5V supply. Each Piezo driver can be independently...
Datasheet
LT3572 on Analog.com
LTC1380
Production
The LTC1380/LTC1393 are CMOS analog multiplexers with SMBus® compatible digital interfaces. The LTC1380 is a single-ended 8-channel multiplexer, while...
Datasheet
LTC1380 on Analog.com
LTC6405
Last Time Buy
The LTC6405 is a very low noise, low distortion, fully differential input/output amplifier optimized for 5V, single supply operation. The LTC6405 input...
LTC6405 on Analog.com
LT580
Production
OBSOLETE PRODUCT Data Sheet For Reference Only
The LT580/LT581 are bandgap voltage references utilizing thin film technology and a greatly improved curvature...
Datasheet
LT580 on Analog.com
LTC4440A-5
Production
The LTC4440A-5 is a high frequency high side N-channel MOSFET gate driver that is designed to operate in applications with VIN voltages up to 80V. The...
Datasheet
LTC4440A-5 on Analog.com
LT8311
Production
The LT8311 is used on the secondary side of a forward converter to provide synchronous MOSFET control and output voltage feedback through an opto-coupler...
Datasheet
LT8311 on Analog.com
LTM4625
Recommended for New Designs
The LTM4625 is a complete 5A step-down switching mode µModule (Power Module) regulator in a tiny 6.25mm × 6.25mm × 5.01mm BGA package. Included in the...
Datasheet
LTM4625 on Analog.com
LT3585
Production
The LT3585 series are highly integrated ICs designed to charge photoflash capacitors in digital and ï¬lm cameras. A new control technique allows for...
Datasheet
LT3585 on Analog.com
LTC6655
Production
The LTC6655 is a complete family of precision bandgap voltage references, offering exceptional noise and drift performance. This low noise and drift is...
Datasheet
LTC6655 on Analog.com
LTM8057
Production
The LTM8057 is a 2kV AC isolated flyback µModule® (power module) DC/DC converter. Included in the package are the switching controller, power switches...
Datasheet
LTM8057 on Analog.com
LTC2955
Recommended for New Designs
The LTC2955 is a micropower, pushbutton on/off controller that manages system power by generating a clean enable output from the supply monitor input and...
Datasheet
LTC2955 on Analog.com
LTM9002
Not Recommended for New Designs
The LTM9002 is a 14-bit dual-channel IF receiver subsystem. Utilizing an integrated system in a package (SiP) technology, it includes a dual high-speed...
Datasheet
LTM9002 on Analog.com
LT1030
Obsolete
The LT1030 is an RS232 line driver that operates over a ±5V to ±15V range on low supply current and can be shutdown to zero supply current. Outputs are...
Datasheet
LT1030 on Analog.com
LTC3811
Production
The LTC3811 is a dual, PolyPhase® synchronous step- down switching regulator controller optimized for output voltages up to 3.3V. The LTC3811 includes...
Datasheet
LTC3811 on Analog.com
LTC2259-14
Production
The LTC2261-14/LTC2260-14/LTC2259-14 are sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2259-14 on Analog.com
LT1024
Last Time Buy
The LT1024 dual, matched internally compensated universal precision operational amplifier can be used inpractically all precision applications requiring...
Datasheet
LT1024 on Analog.com
LTC3401
Production
The LTC3401 is a high efficiency, fixed frequency, step-up DC/DC converter that operates from an input voltage below 1V. The device includes a 0.16O N...
Datasheet
LTC3401 on Analog.com
LTC3422
Production
The LTC3422 is a high efficiency, current mode, fixed frequency, step-up DC/DC converter with true output disconnect and inrush current limiting. The part...
Datasheet
LTC3422 on Analog.com
LTC4238
Last Time Buy
The LTC4238 is a high voltage high current Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. Dual 12V gate...
Datasheet
LTC4238 on Analog.com
LTC3549
Production
The LTC3549 is a high efficiency, monolithic synchronous buck regulator using a constant-frequency, current mode architecture. The output voltage is adjusted...
Datasheet
LTC3549 on Analog.com
LTC5588-1
Production
The LTC5588-1 is a direct conversion I/Q modulator designed for high performance wireless applications. It allows direct modulation of an RF signal using...
Datasheet
LTC5588-1 on Analog.com
LTC3302
Recommended for New Designs
The LTC3302 is a very small, high efficiency, low noise, monolithic synchronous 2A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3302 on Analog.com
LTC3639
Recommended for New Designs
The LTC3639 is a high efficiency step-down DC/DC regulator with internal high side and synchronous power switches that draws only 12µA typical DC supply...
Datasheet
LTC3639 on Analog.com
LTC6259
Last Time Buy
The LTC6258/LTC6259/LTC6260 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
Datasheet
LTC6259 on Analog.com
LTC3638
Recommended for New Designs
The LTC3638 is a high efficiency step-down DC/DC regulator with internal power switch that draws only 12µA typical DC supply current while maintaining...
Datasheet
LTC3638 on Analog.com
LT3436
Production
The LT3436 is an 800kHz monolithic boost switching regulator. A high efficiency 3A, 0.1O switch is included on the die together with all the control circuitry...
Datasheet
LT3436 on Analog.com
LTC2271
Production
The LTC2271 is a 2-channel, simultaneous sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect...
Datasheet
LTC2271 on Analog.com
LTM2889
Production
The LTM2889 is a complete galvanically-isolated Controller Area Network (CAN) µModule® (micromodule) transceiver. No external components are required ...
Datasheet
LTM2889 on Analog.com
LTC3805-5
Production
The LTC3805-5 is a current mode DC/DC controller designed to drive an N-channel MOSFET in flyback, boost and SEPIC converter applications. Operating frequency...
Datasheet
LTC3805-5 on Analog.com
LT8361
Recommended for New Designs
The LT®8361 is a current mode DC/DC converter with a 100V, 2A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture...
Datasheet
LT8361 on Analog.com
LT6375
Recommended for New Designs
The LT6375 is a unity-gain difference amplifier which combines excellent DC precision, a very high input common mode range and a wide supply voltage range...
Datasheet
LT6375 on Analog.com
LTC2107
Production
The LTC2107 is a 16-bit, 210Msps high performance ADC. The combination of high sample rate, low noise and high linearity enable a new generation of digital...
Datasheet
LTC2107 on Analog.com
LTC2391-16
Production
The LTC2391-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2391-16 supports...
Datasheet
LTC2391-16 on Analog.com
LTC4441
Production
The LTC4441/LTC4441-1 is an N-channel MOSFET gate driver that can supply up to 6A of peak output current. The chip is designed to operate with a supply...
Datasheet
LTC4441 on Analog.com
LTC1661
Production
The LTC1661 integrates two accurate, serially addressable, 10-bit digital-to-analog converters (DACs) in a single tiny MS8 package. Each buffered DAC draws...
Datasheet
LTC1661 on Analog.com
LTC2242-10
Production
The LTC2242-10 is a 250Msps, sampling 10-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2240-10 is perfect...
Datasheet
LTC2242-10 on Analog.com
LTC1980
Production
The LTC1980 integrates PWM power control for charging a battery and converting the battery voltage to a regulated output or simultaneously charging the...
Datasheet
LTC1980 on Analog.com
LT1079
Production
The LT1078 is a micropower dual op amp in 8-pin packages including the small outline surface mount package. The LT1079 is a micropower quad op amp offered...
Datasheet
LT1079 on Analog.com
LTC5531
Production
The LTC5531 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5531 on Analog.com
LTC3675
Production
The LTC3675/LTC3675-1 are a digitally programmable high efficiency multioutput power supplies plus dual string LED driver ICs optimized for high power...
Datasheet
LTC3675 on Analog.com
LTC6400-14
Last Time Buy
The LTC6400-14 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive...
LTC6400-14 on Analog.com
LTC5594
Recommended for New Designs
The LTC5594 is a direct conversion quadrature demodulator optimized for high linearity zero-IF and low-IF receiver applications in the 300MHz to 9GHz frequency...
Datasheet
LTC5594 on Analog.com
LTC2858
Production
The LTC2856-1, LTC2856-2, LTC2857-1, LTC2857-2, LTC2858-1 and LTC2858-2 are low power, RS485/RS422 transceivers operating on 5V supplies at maximum data...
Datasheet
LTC2858 on Analog.com
LT1220
Production
The LT1220 is a high speed operational amplifier with superior DC performance. The LT1220 features reduced input offset voltage, lower input bias currents...
Datasheet
LT1220 on Analog.com
LTC6802-2
Not Recommended for New Designs
The LTC6802-2 is a complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer and a serial...
Datasheet
LTC6802-2 on Analog.com
LT6108
Recommended for New Designs
The LT6108 is a complete high side current sense device that incorporates a precision current sense amplifier, an integrated voltage reference and a comparator...
Datasheet
LT6108 on Analog.com
LT1638
Production
The LT1638 is a low power dual rail-to-rail input and output operational amplifier available in the standard 8-pin PDIP and SO packages as well as the...
Datasheet
LT1638 on Analog.com
LTC2925
Recommended for New Designs
The LTC2925 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supplies can be configured...
Datasheet
LTC2925 on Analog.com
LTC3827-1
Production
The LTC3827-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3827-1 on Analog.com
LTC2261-12
Production
The LTC2261-12/LTC2260-12/LTC2259-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2261-12 on Analog.com
LTC1456
Production
The LTC1456 is a complete single supply, rail-to-rail voltage output, 12-bit digital-to-analog converter (DAC) in an SO-8 package. It includes a rail-to...
Datasheet
LTC1456 on Analog.com
LTC3416
Production
The LTC3416 is a high efficiency monolithic synchronous, step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3416 on Analog.com
LTC4400
Obsolete
The LTC4400-1 is a SOT-23 RF power controller for fast turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. Examples include the Hitachi...
Datasheet
LTC4400 on Analog.com
LT1003
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1003 is a 5 amp version of the popular LM123 5V regulator...
Datasheet
LT1003 on Analog.com
LTC2162
Production
The LTC2162/LTC2161/LTC2160 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2162 on Analog.com
LT1300
Production
The LT1300 is a micropower step-up DC/DC converter that utilizes Burst Mode™ operation. The device can deliver 5V or 3.3V from a two-cell battery input...
Datasheet
LT1300 on Analog.com
LTC6752
Recommended for New Designs
The LTC6752 is a family of very high speed comparators capable of supporting toggle rates up to 280MHz. These comparators exhibit low propagation delays...
Datasheet
LTC6752 on Analog.com
LT1579
Production
The LT1579 is a dual input, single output, low dropout regulator. This device is designed to provide an uninterruptible output voltage from two independent...
Datasheet
LT1579 on Analog.com
LTC3877
Recommended for New Designs
The LTC3877 is a VID-programmable, constant frequency current mode step-down controller using an advanced and proprietary architecture. This new architecture...
Datasheet
LTC3877 on Analog.com
LTC1693-5
Production
The LTC1693-5 drives power P-channel MOSFETs at high speed. The 1.5A peak output current reduces switching losses in MOSFETs with high gate capacitance...
Datasheet
LTC1693-5 on Analog.com
LTC2626
Production
The LTC2606/LTC2616/LTC2626 are single 16-, 14- and 12-bit, 2.7V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in...
Datasheet
LTC2626 on Analog.com
LTC2320-12
Production
The LTC2320-12 is a low noise, high speed octal 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2320-12 on Analog.com
LTC6820
Production
The LTC6820 provides bidirectional SPI communications between two isolated devices through a single twisted-pair connection. Each LTC6820 encodes logic...
Datasheet
LTC6820 on Analog.com
LTC3810-5
Production
The LTC3810-5 is a synchronous step-down switching regulator controller that can directly step-down voltages from up to 60V, making it ideal for telecom...
Datasheet
LTC3810-5 on Analog.com
LTC2373-18
Production
The LTC2373-18 is a low noise, high speed, 8-channel 18-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2373...
Datasheet
LTC2373-18 on Analog.com
LTC2157-14
Production
The LTC2157-14/LTC2156-14/LTC2155-14 are 2-channel simultaneous sampling 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency...
Datasheet
LTC2157-14 on Analog.com
LT8365
Recommended for New Designs
The LT8365 is a current mode DC/DC converter with a 1.5A, 150V switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture...
Datasheet
LT8365 on Analog.com
LT1108
Production
The LT1108 is a versatile micropower DC/DC converter. The device requires only four external components to deliver a fixed output of 5V or 12V. Supply...
Datasheet
LT1108 on Analog.com
LTC2637
Production
The LTC2637 is a family of octal 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift 10ppm/°C reference in 14-lead DFN...
Datasheet
LTC2637 on Analog.com
LTC2260-12
Production
The LTC2261-12/LTC2260-12/LTC2259-12 are sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect...
Datasheet
LTC2260-12 on Analog.com
LT6650
Production
The LT6650 is a micropower, low voltage 400mV reference. Operating with supplies from 1.4V up to 18V, the device draws only 5.6µA typical, making it ideal...
Datasheet
LT6650 on Analog.com
LTC3871
Recommended for New Designs
The LTC3871/LTC3871-1 is a high performance bidirectional buck or boost switching regulator controller that operates in either buck or boost mode on demand...
LTC3871 on Analog.com
LT1990-10
Recommended for New Designs
The LT®1990-10 is a micropower precision difference amplifier with a very high common mode input voltage range, a fixed gain of 10 and 100kHz bandwidth...
Datasheet
LT1990-10 on Analog.com
LTM8067
Recommended for New Designs
The LTM8067 is a 2kVAC isolated flyback μModule® (power module) DC/DC converter. Included in the package are the switching controller, power switches...
Datasheet
LTM8067 on Analog.com
LT1017
Production
The LT1017/LT1018 are general purpose micropower comparators. The LT1017 is optimized for lowest operating power while the LT1018 operates at higher power...
Datasheet
LT1017 on Analog.com
LTC1279
Production
The LTC1279 is a 1.4µs, 600ksps, sampling 12-bit A/D converter which draws only 60mW from a single 5V or ±5V supplies. This easy-to-use device comes complete...
Datasheet
LTC1279 on Analog.com
LT1678
Production
The LT1678/LT1679 are dual/quad rail-to-rail op amps offering both low noise and precision: 3.9nV/vHz wideband noise, 1/f corner frequency of 4Hz and 90nV...
Datasheet
LT1678 on Analog.com
LTC2484
Production
The LTC2484 combines a 24-bit No Latency ?S™ analog-to-digital converter with patented Easy Drive™ technology. The patented sampling scheme eliminates...
Datasheet
LTC2484 on Analog.com
LT3060
Recommended for New Designs
The LT3060 series are micropower, low dropout voltage (LDO) linear regulators that operate over a 1.6V to 45V input supply range. The devices supply 100mA...
Datasheet
LT3060 on Analog.com
LT3976
Production
The LT3976 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 40V. Low quiescent current design...
Datasheet
LT3976 on Analog.com
LT1107
Production
The LT1107 is a versatile micropower DC/DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. Supply...
Datasheet
LT1107 on Analog.com
LT2178
Production
The LT2178 is a micropower dual op amp in a surface mount standard 8-pin configuration, the LT2179 is a micropower quad op amp offered in a surface mount...
Datasheet
LT2178 on Analog.com
LTC3770
Production
The LTC3770 is a synchronous step-down switching regulator controller with output voltage up/down tracking capability and voltage margining. Its advanced...
Datasheet
LTC3770 on Analog.com
LTC1646
Production
The LTC1646 is a Hot Swap™ controller that allows a board to be safely inserted and removed from a live CompactPCI bus slot. Two external N-Channel transistors...
Datasheet
LTC1646 on Analog.com
LTC1197
Production
The LTC1197/LTC1197L/LTC1199/LTC1199L are 10-bit A/D converters with sampling rates up to 500kHz. They have 2.7V (L) and 5V versions and are offered in...
Datasheet
LTC1197 on Analog.com
LTC6991
Production
The LTC6991 is a silicon oscillator with a programmable period range of 1.024ms to 9.54 hours (29.1µHz to 977Hz), specifically intended for long duration...
Datasheet
LTC6991 on Analog.com
LT3032
Recommended for New Designs
The LT3032 is a dual, low noise, positive and negative low dropout voltage linear regulator. Each regulator delivers up to 150mA with a typical 300mV dropout...
Datasheet
LT3032 on Analog.com
LTM8062
Recommended for New Designs
The LTM8062/LTM8062A are complete 32VIN, 2A µModule® (power module) power tracking battery chargers. The LTM8062/ LTM8062A provide a constant-current/constant...
Datasheet
LTM8062 on Analog.com
LTC3868-1
Production
The LTC3868-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3868-1 on Analog.com
LT1792
Production
The LT1792 achieves a new standard of excellence in noise performance for a JFET op amp. The 4.2nV/vHz voltage noise combined with low current noise and...
Datasheet
LT1792 on Analog.com
LT3092
Production
The LT3092 is a programmable 2-terminal current source. It requires only two resistors to set an output current between 0.5mA and 200mA. A multitude of...
Datasheet
LT3092 on Analog.com
LT3093
Recommended for New Designs
The LT3093 is a high performance low dropout negative linear regulator featuring ADI’s ultralow noise and ultrahigh PSRR architecture for powering noise...
Datasheet
LT3093 on Analog.com
LTC2264-12
Production
The LTC2265-12/LTC2264-12/LTC2263-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2264-12 on Analog.com
LTC1628-SYNC
Production
The LTC1628-SYNC is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC1628-SYNC on Analog.com
LTC3776
Production
The LTC3776 is a 2-phase dual output synchronous stepdown switching regulator controller for DDR/QDR memory termination applications. The second controller...
Datasheet
LTC3776 on Analog.com
LT1506
Production
The LT1506 is a 500kHz monolithic buck mode switching regulator functionally identical to the LT1374 but optimized for lower input voltage applications...
Datasheet
LT1506 on Analog.com
LTC1409
Production
The LTC1409 is a 1µs, 800ksps, sampling 12-bit A/D converter that draws only 80mW from ±5V supplies. This easy-to-use device includes a high dynamic range...
Datasheet
LTC1409 on Analog.com
LTC2264-14
Production
The LTC2265-14/LTC2264-14/LTC2263-14 are 2-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2264-14 on Analog.com
LTC2990
Recommended for New Designs
The LTC®2990 is used to monitor system temperatures, voltages and currents. Through the I2C serial interface, the device can be configured to measure many...
Datasheet
LTC2990 on Analog.com
LTC4380
Recommended for New Designs
The LTC4380 low quiescent current surge stopper protects loads from high voltage transients. Overvoltage protection is provided by clamping the gate voltage...
Datasheet
LTC4380 on Analog.com
LTC7066
Pre release
The LTC7066 drives two N-Channel MOSFETs in a half-bridge configuration with supply voltages up to 140V. Both high-side and low-side drivers can drive...
Datasheet
LTC7066 on Analog.com
LTC1386
Production
The LTC1386 is an ultra-low power 2-driver/2-receiver EIA/TIA562 transceiver that operates from single 3.3V supply. The charge pump requires only four...
Datasheet
LTC1386 on Analog.com
LTC4301L
Production
The LTC4301L hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition...
Datasheet
LTC4301L on Analog.com
LTC2908
Production
The LTC2908 is a six input supply monitor for systems requiring a precise and compact monitoring solution for multiple supply voltages. The inputs can...
Datasheet
LTC2908 on Analog.com
LTC2269
Production
The LTC2269 is a sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications...
Datasheet
LTC2269 on Analog.com
LT4275
Recommended for New Designs
The LT4275 is a pin-for-pin compatible family of IEEE 802.3 and LTPoE++ powered device (PD) controllers.
The LT4275A employs a proprietary LTPoE++ classification...
LT4275 on Analog.com
LTM9009-14
Production
The LTM9011-14/LTM9010-14/LTM9009-14 are 8-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTM9009-14 on Analog.com
LT1170
Production
The LT1170/LT1171/LT1172 are monolithic high power-switching regulators. They can be operated in all standard switching configurations including buck,...
Datasheet
LT1170 on Analog.com
LTC3452
Production
The LTC3452 is a synchronous buck-boost DC/DC converter optimized for driving two banks of white LEDs from a single Li-Ion battery input. Five parallel...
Datasheet
LTC3452 on Analog.com
LTC3721-1
Production
The LTC3721-1 push-pull PWM controller provides all of the control and protection functions necessary for compact and highly efficient, isolated power...
Datasheet
LTC3721-1 on Analog.com
LTC2919
Production
The LTC2919 is a triple/dual input monitor intended for a variety of system monitoring applications. Polarity selection and a buffered reference output...
Datasheet
LTC2919 on Analog.com
LTC7825
Recommended for New Designs
The LTC7825 is a fully integrated monolithic DC/DC converter. It achieves very high efficiency with a switched capacitor architecture in applications with...
LTC7825 on Analog.com
LTC1382
Production
The LTC1382 is an ultra-low power 2-driver/2-receiver RS232 transceiver that operates from a single 5V supply. The charge pump requires only four space...
Datasheet
LTC1382 on Analog.com
LTC3860
Production
The LTC3860 is a dual, PolyPhase® synchronous stepdown switching regulator controller for high current distributed power systems, digital signal processors...
Datasheet
LTC3860 on Analog.com
LTC2312-12
Production
The LTC2312-12 is a 12-bit, 500ksps, serial sampling A/D converter that draws only 3mA from a single 3V or 5V supply. The LTC2312-12 contains an integrated...
Datasheet
LTC2312-12 on Analog.com
LT1465
Last Time Buy
The LT1464 (dual) and LT1465 (quad) are the first micropower op amps (200µA max per amp) to offer picoampere input bias currents (500fA typ) and unity...
Datasheet
LT1465 on Analog.com
LT1424-9
Production
The LT1424-9 is a monolithic high power switching regulator specifically designed for the isolated flyback topology. No “third winding” or optoisolator...
Datasheet
LT1424-9 on Analog.com
LT1162
Production
The LT1160/LT1162 are cost effective half-/full-bridge N-channel power MOSFET drivers. The floating driver can drive the topside N-channel power MOSFETs...
Datasheet
LT1162 on Analog.com
LTC4061-4.4
Production
The LTC4061-4.4 is a full-featured, flexible, standalone linear charger for single-cell 4.375V Lithium-Ion batteries. It is capable of operating within...
Datasheet
LTC4061-4.4 on Analog.com
LTC7891
Recommended for New Designs
The LTC7891 is a high performance, step-down, dc-to-dc switching
regulator controller that drives all N-channel synchronous gallium
nitride (GaN) field...
Datasheet
LTC7891 on Analog.com
LTM8023
Production
The LTM8023 is a complete 2A, DC/DC step-down power supply. Included in the package are the switching controller, power switches, inductor, and all support...
Datasheet
LTM8023 on Analog.com
LTC1143
Production
The LTC1143 series is a dual step-down switching regulator controller featuring automatic Burst Mode™ operation to maintain high efficiencies at low output...
Datasheet
LTC1143 on Analog.com
LTC1702
Production
The LTC1702 is a dual switching regulator controller optimized for high efficiency with low input voltages. It includes two complete, on-chip, independent...
Datasheet
LTC1702 on Analog.com
LTC1387
Production
The LTC1387 is a low power reconfigurable CMOS bidirectional transceiver. It can be configured as an RS485 differential port or as two RS232 single-ended...
Datasheet
LTC1387 on Analog.com
LTC7138
Recommended for New Designs
The LTC7138 is a high efficiency step-down DC/DC regulator with internal power switch that draws only 12μA typical DC supply current while maintaining...
Datasheet
LTC7138 on Analog.com
LTC4309
Production
The LTC4309 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4309...
Datasheet
LTC4309 on Analog.com
LTC7811
Recommended for New Designs
The LTC7811 is a high performance triple output (buck/buck/boost) DC/DC switching regulator controller that drives all N-channel power MOSFET stages. Its...
Datasheet
LTC7811 on Analog.com
LTC3603
Production
The LTC3603 is a high efficiency, monolithic synchronous step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates...
Datasheet
LTC3603 on Analog.com
LT1131A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1131A on Analog.com
LT337A
Production
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Analog Devices Are Now Obsolete
The LT137A/LT337A negative adjustable regulators will...
Datasheet
LT337A on Analog.com
LT6236
Recommended for New Designs
The LT6236/LT6237/LT6238 are single/dual/quad low noise, rail-to-rail output op amps that feature 1.1nV/vHz input referred noise voltage density and draw...
Datasheet
LT6236 on Analog.com
LTC2980
Recommended for New Designs
The LTC2980 is a 16-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2980 on Analog.com
LT1194
Obsolete
The LT1194 is a video difference amplifier optimized for operation on ±5V and a single 5V supply. The amplifier has a fixed gain of 20dB and features...
Datasheet
LT1194 on Analog.com
LT1005
Obsolete
Obsolete: Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1005 features two positive 5 volt regulators...
Datasheet
LT1005 on Analog.com
LT3955
Production
The LT3955 is a DC/DC converter designed to operate as a constant-current source and constant-voltage regulator. It features an internal low side N-channel...
Datasheet
LT3955 on Analog.com
LTC5507
Production
The LTC5507 is an RF power detector for applications operating from 100kHz to 1000MHz. The input frequency range is determined by an external capacitor...
Datasheet
LTC5507 on Analog.com
LT8602
Recommended for New Designs
The LT8602 is a quad channel, current mode, monolithic buck switching regulator with a programmable power-on reset. All regulators are synchronized to...
Datasheet
LT8602 on Analog.com
LTC2156-14
Production
The LTC2157-14/LTC2156-14/LTC2155-14 are 2-channel simultaneous sampling 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency...
Datasheet
LTC2156-14 on Analog.com
LTC3407-2
Production
The LTC3407-2 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 2.5V to 5.5V...
Datasheet
LTC3407-2 on Analog.com
LTC3854
Production
The LTC3854 is a high performance synchronous stepdown switching DC/DC controller that drives an all N-channel synchronous power MOSFET stage.
The LTC3854...
Datasheet
LTC3854 on Analog.com
LT5560
Production
The LT5560 is a low power, high performance broadband active mixer. This double-balanced mixer can be driven by a single-ended LO source and requires only...
Datasheet
LT5560 on Analog.com
LTC6373
Recommended for New Designs
The LTC6373 is a precision instrumentation amplifier with fully
differential outputs which includes a closely-matched internal resistor
network to achieve...
Datasheet
LTC6373 on Analog.com
LTC2142-12
Production
The LTC2142-12/LTC2141-12/LTC2140-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2142-12 on Analog.com
LT8338
Recommended for New Designs
The LT8338 is a synchronous monolithic step-up regulator that provides high efficiency for input and output up to 40V. It consumes only 6μA quiescent...
Datasheet
LT8338 on Analog.com
LTM4616
Recommended for New Designs
The LTM4616 is a complete dual 2-phase 8A per channel switch mode DC/DC power regulator system in a 15mm × 15mm surface mount LGA or BGA package. Included...
Datasheet
LTM4616 on Analog.com
LTC1458
Production
The LTC1458/LTC1458L are complete single supply, quad rail-to-rail voltage output, 12-bit digital-to-analog converters (DACs) in SO-28 and SSOP-28 packages...
Datasheet
LTC1458 on Analog.com
LT6604-15
Recommended for New Designs
The LT6604-15 consists of two matched, fully differential amplifiers, each with a 4th order, 15MHz lowpass ?lter. The ?xed frequency lowpass ?lter approximates...
Datasheet
LT6604-15 on Analog.com
LT5504
Obsolete
The LT5504 is an 800MHz to 2700MHz monolithic integrated measuring receiver, capable of detecting a wide dynamic range RF signal from -75dBm to +5dBm....
Datasheet
LT5504 on Analog.com
LTC5553
Production
The LTC5553 is a high performance, microwave double balanced passive mixer that can be used for frequency upconversion or downconversion.
The LTC5553’s...
Datasheet
LTC5553 on Analog.com
LT1533
Production
The LT1533 is a new class of switching regulator designed to reduce conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are...
Datasheet
LT1533 on Analog.com
LTC1590
Production
The LTC1590 is a dual, serial input 12-bit multiplying digital-to-analog converter (DAC). It includes two current output multiplying CMOS DACs and an easy...
Datasheet
LTC1590 on Analog.com
LTC2630
Production
The LTC2630 is a family of 12-, 10-, and 8-bit voltage output DACs with an integrated, high-accuracy, low-drift reference in a 6-lead SC70 package. It...
Datasheet
LTC2630 on Analog.com
LT3790
Production
The LT3790 is a synchronous 4-switch buck-boost voltage/current regulator controller. The LT3790 can regulate output voltage, output current, or input...
Datasheet
LT3790 on Analog.com
LTC2385-16
Production
The LTC2385-16 is a low noise, high speed, 16-bit 5Msps successive approximation register (SAR) ADC ideally suited for a wide range of applications. The...
Datasheet
LTC2385-16 on Analog.com
LTC1096
Production
The LTC1096/LTC1096L/LTC1098/LTC1098L are micropower, 8-bit A/D converters that draw only 80µA of supply current when converting. They automatically power...
Datasheet
LTC1096 on Analog.com
LT3023
Recommended for New Designs
The LT3023 is a dual, micropower, low noise, low dropout regulator. With an external 0.01µF bypass capacitor, output noise drops to 20µVRMS over a 10Hz...
Datasheet
LT3023 on Analog.com
LTC1150
Production
The LTC1150 is a high-voltage, high-performance zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other...
Datasheet
LTC1150 on Analog.com
LTC2944
Production
The LTC2944 measures battery charge state, battery voltage, battery current and its own temperature in portable product applications. The wide input voltage...
Datasheet
LTC2944 on Analog.com
LT1353
Production
The LT1352/LT1353 are dual and quad, very low power, high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much...
Datasheet
LT1353 on Analog.com
LT6234
Production
The LT6233/LT6234/LT6235 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.9nV/vHz noise voltage and draw only...
Datasheet
LT6234 on Analog.com
LT1675
Production
The LT1675 is a high speed RGB multiplexer designed for pixel switching and fast workstation graphics. Included on chip are three SPDT switches and three...
Datasheet
LT1675 on Analog.com
LT3380
Recommended for New Designs
The LT3380 is a complete power management solution for advanced portable application processor-based systems. The device contains four synchronous step...
Datasheet
LT3380 on Analog.com
LTC1504A
Obsolete
The LTC1504A is a self-contained, high efficiency synchronous buck switching regulator. It includes a pair of on-chip 1.3O power switches, enabling it...
Datasheet
LTC1504A on Analog.com
LTC4353
Recommended for New Designs
The LTC4353 controls external N-channel MOSFETs to implement an ideal diode function. It replaces two high power Schottky diodes and their associated heat...
Datasheet
LTC4353 on Analog.com
LT3460
Production
The LT3460/LT3460-1 are general purpose step-up DC/DC converters. The LT3460/LT3460-1 switch at 1.3MHz/ 650KHz, allowing the use of tiny, low cost and...
Datasheet
LT3460 on Analog.com
LTM4663
Recommended for New Designs
The LTM4663 is a complete 1.5A µModule® Thermoelectric Cooler (TEC) regulator in a tiny 3.5mm × 4mm × 1.3mm LGA package. Included in the package are...
Datasheet
LTM4663 on Analog.com
LTC1435A
Production
The LTC1435A is a synchronous step-down switching regulator controller that drives external N-channel power MOSFETs using a fixed frequency architecture...
Datasheet
LTC1435A on Analog.com
LT3493-3
Production
The LT3493-3 is a current mode PWM step-down DC/DC converter with an internal 1.75A power switch. The wide operating input range of 6.8V to 36V (40V maximum...
Datasheet
LT3493-3 on Analog.com
LTC6091
Recommended for New Designs
The LTC6091 is a dual, high voltage precision operational amplifier. The low noise, low bias current input stage is ideal for high gain configurations...
Datasheet
LTC6091 on Analog.com
LTC6955
Last Time Buy
The LTC6955 is a high performance, ultralow jitter,
fanout clock buffer with eleven outputs. Its 4-pin parallel
control port allows for multiple output...
Datasheet
LTC6955 on Analog.com
LTC5533
Production
The LTC5533 is a dual channel RF power detector for RF applications operating in the 300MHz to 11GHz range. Two independent temperature compensated Schottky...
Datasheet
LTC5533 on Analog.com
LT3592
Production
The LT3592 is a ?xed frequency step-down DC/DC converter designed to operate as a constant-current source. An external sense resistor monitors the output...
Datasheet
LT3592 on Analog.com
LT8601
Recommended for New Designs
The LT8601 is a triple channel, current mode, monolithic buck switching regulator with a programmable power-on reset. All regulators are synchronized to...
Datasheet
LT8601 on Analog.com
LT1568
Production
The LT1568 is an easy-to-use, active-RC filter building block with rail-to-rail inputs and outputs. The internal capacitors of the IC and the GBW product...
Datasheet
LT1568 on Analog.com
LTM4645
Obsolete
The LTM4645 is a 25A output switching mode step-down DC/DC µModule® (power module) regulator. Included in the package are the switching controller, power...
Datasheet
LTM4645 on Analog.com
LTC6261
Last Time Buy
The LTC6261/LTC6262/LTC6263 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
LTC6261 on Analog.com
LTC3531
Recommended for New Designs
The LTC3531/LTC3531-3.3/LTC3531-3 are synchronous buck-boost DC/DC converters that operate from input voltages above, below or equal to the output voltage...
Datasheet
LTC3531 on Analog.com
LT8607
Recommended for New Designs
The LT8607 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of non-switching quiescent...
Datasheet
LT8607 on Analog.com
LTC1286
Production
The LTC1286/LTC1298 are micropower, 12-bit, successive approximation sampling A/D converters. They typically draw only 250µA of supply current when converting...
Datasheet
LTC1286 on Analog.com
LTC3670
Production
The LTC3670 is a triple power supply composed of a 400mA synchronous buck regulator and two 150mA low dropout linear regulators (LDOs). The input supply...
Datasheet
LTC3670 on Analog.com
LTM8002
Recommended for New Designs
The LTM8002 is a 40VIN, 2.5A step-down µModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor...
Datasheet
LTM8002 on Analog.com
LT1229
Production
The LT1229/LT1230 dual and quad 100MHz current feedback amplifiers are designed for maximum performance in small packages. Using industry standard pinouts...
Datasheet
LT1229 on Analog.com
LTC1474
Production
The LTC1474/LTC1475 series are high efficiency step-down converters with internal P-channel MOSFET power switches that draw only 10µA typical DC supply...
Datasheet
LTC1474 on Analog.com
LTC4151
Production
The LTC4151 is a high side power monitor that operates over a wide voltage range of 7V to 80V. In default operation mode, the on-board 12-bit ADC continuously...
Datasheet
LTC4151 on Analog.com
LTC1877
Production
The LTC1877 s a high efficiency monolithic synchronous buck regulator using a constant-frequency, current mode architecture. Supply current during operation...
Datasheet
LTC1877 on Analog.com
LT1176
Production
The LT1176 is a 1A monolithic bipolar switching regulator which requires only a few external parts for normal operation. The power switch, all oscillator...
Datasheet
LT1176 on Analog.com
LT3061
Recommended for New Designs
The LT3061 is a micropower, low dropout (LDO) linear regulator that operates over a 1.6V to 45V supply range and is available in a series of fixed output...
Datasheet
LT3061 on Analog.com
LTC4331
Production
The LTC4331 is a point-to-point SMBus compatible I2C
slave device extender designed for operation in high noise
industrial environments. Using a ±60V...
Datasheet
LTC4331 on Analog.com
LTC4215-1
Recommended for New Designs
The LTC4215-1/LTC4215-3 Hot Swap™ controllers allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor...
Datasheet
LTC4215-1 on Analog.com
LTC2311-14
Production
The LTC2311-14 is a low noise, high speed 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common mode...
Datasheet
LTC2311-14 on Analog.com
LTM4655
Recommended for New Designs
The LTM4655 is an ultralow noise 40V, dual 4A or single 8A DC/DC μModule® regulator designed to meet the radiated emissions requirements of EN55022....
Datasheet
LTM4655 on Analog.com
LT6011
Production
The LT6011/LT6012 op amps combine low noise and high precision input performance with low power consumption and rail-to-rail output swing.
Input offset...
Datasheet
LT6011 on Analog.com
LTC1298
Production
The LTC1286/LTC1298 are micropower, 12-bit, successive approximation sampling A/D converters. They typically draw only 250µA of supply current when converting...
Datasheet
LTC1298 on Analog.com
LTC1879
Production
The LTC1879 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Operating supply current...
Datasheet
LTC1879 on Analog.com
LTC3315B
Recommended for New Designs
The LTC3315B features dual 2A monolithic synchronous step-down converters operating from a 2.25V to 5.5V input supply in one package for space-constrained...
Datasheet
LTC3315B on Analog.com
LTC2323-12
Production
The LTC2323-12 is a low noise, high speed dual 12-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2323-12 on Analog.com
LTC1325
Production
The LTC1325 provides the core of a flexible, cost-effective solution for an integrated battery management system. The monolithic CMOS chip controls the...
Datasheet
LTC1325 on Analog.com
LT8642S
Recommended for New Designs
The LT8642S synchronous step-down regulator features second generation Silent Switcher architecture designed to minimize EMI emissions while deliveringÂ...
Datasheet
LT8642S on Analog.com
LTC2873
Production
The LTC2873 is a robust pin-configurable multiprotocol transceiver that supports RS232, RS485, and RS422 protocols while operating on a single 3V to 5...
Datasheet
LTC2873 on Analog.com
LTC1735-1
Production
The LTC1735-1 is a synchronous step-down switching regulator controller optimized for CPU power. OPTI-LOOP compensation allows the transient response to...
Datasheet
LTC1735-1 on Analog.com
LTM4664A
Recommended for New Designs
The LTM4664A is a complete nonisolated 48V input high efficiency step-down µModule® regulator with dual 30A outputs. The switching controllers, power MOSFETs...
Datasheet
LTM4664A on Analog.com
LT3465
Production
The LT3465/LT3465A are step-up DC/DC converters designed to drive up to six LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical...
Datasheet
LT3465 on Analog.com
LTM8068
Recommended for New Designs
The LTM8068 is a 2kV AC isolated flyback μModule® (power module) DC/DC converter with LDO post regulator. Included in the package are the switching controller...
Datasheet
LTM8068 on Analog.com
LTM4623
Recommended for New Designs
The LTM4623 is a complete 3A step-down switching
mode µModule (micromodule) regulator in a tiny ultrathin
6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm...
Datasheet
LTM4623 on Analog.com
LTC3300-2
Recommended for New Designs
The LTC3300-2 is a fault-protected controller IC for transformer-based bidirectional active balancing of multi-cell battery stacks. All associated gate...
Datasheet
LTC3300-2 on Analog.com
LT1738
Production
The LT1738 is a switching regulator controller designed to lower conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are...
Datasheet
LT1738 on Analog.com
LT580X
Production
Datasheet
LT580X on Analog.com
LT3753
Recommended for New Designs
The LT3753 is a current mode PWM controller optimized for an active clamp forward converter topology, allowing up to 100V input operation.
A programmable...
Datasheet
LT3753 on Analog.com
LTC2144-14
Production
The LTC2145-14/LTC2144-14/LTC2143-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2144-14 on Analog.com
LT1360
Production
The LT1360 is a high speed, very high slew rate operational amplifier with excellent DC performance. The LT1360 features reduced supply current, lower...
Datasheet
LT1360 on Analog.com
LTC6811-2
Production
The LTC6811 is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1.2mV...
Datasheet
LTC6811-2 on Analog.com
LT8356-1
Recommended for New Designs
The LT8356-1 is a DC/DC controller designed to drive high current LEDs. The fixed frequency, current mode architecture results in stable operation over...
Datasheet
LT8356-1 on Analog.com
LTC3816
Recommended for New Designs
The LTC3816 is a single-phase synchronous step-down DC/DC switching regulator controller that drives N-channel power MOSFETs in a constant-frequency voltage...
Datasheet
LTC3816 on Analog.com
LTC7050-1
Recommended for New Designs
The LTC7050-1 dual monolithic power stage fully integrates high speed drivers with low resistance half-bridge power switches plus comprehensive monitoring...
Datasheet
LTC7050-1 on Analog.com
LTC3643
Recommended for New Designs
The LTC3643 is a bidirectional synchronous step-up charger and step-down converter which efficiently charges a capacitor array up to 40V from an input...
Datasheet
LTC3643 on Analog.com
LTC1287
Production
The LTC1287 is a 3V data acquisition component which contains a serial I/O successive approximation A/D converter. The device specifications are guaranteed...
Datasheet
LTC1287 on Analog.com
LTC3642
Production
The LTC3642 is a high efficiency, high voltage step-down DC/DC converter with internal high side and synchronous power switches that draws only 12µA typical...
Datasheet
LTC3642 on Analog.com
LT2079
Production
The LT2078 is a micropower dual op amp in 8-pin small outline, standard surface mount package, and LT2079 is a micropower quad op amp offered in the standard...
Datasheet
LT2079 on Analog.com
LT3519
Production
The LT3519/LT3519-1/LT3519-2 are fixed frequency step-up DC/DC converters designed to drive LEDs. They feature an internal 45V, 750mA low side switch and...
Datasheet
LT3519 on Analog.com
LTC3260
Recommended for New Designs
The LTC3260 is a low noise dual polarity output power supply that includes an inverting charge pump with both positive and negative LDO regulators. The...
Datasheet
LTC3260 on Analog.com
LTC2448
Production
The LTC2444/LTC2445/LTC2448/LTC2449 are 8-/16- channel (4-/8-differential) high speed 24-bit No Latency ?? ADCs. They use a proprietary delta-sigma architecture...
Datasheet
LTC2448 on Analog.com
LT2940
Production
The LT2940 measures a high side current and a differential voltage, multiplies them and outputs a current proportional to instantaneous power. Bidirectional...
Datasheet
LT2940 on Analog.com
LTM8049
Recommended for New Designs
The LTM8049 is a Dual SEPIC/Inverting μModule® (power module) DC/DC Converter. Each of the two outputs can be easily configured as a SEPIC or Inverting...
Datasheet
LTM8049 on Analog.com
LT1218L
Production
The LT1218/LT1219 are bipolar op amps which combine rail-to-rail input and output operation with precision specifications. Unlike other rail-to-rail amplifiers...
Datasheet
LT1218L on Analog.com
LT1469
Recommended for New Designs
The LT1469 is a dual, precision high speed operational amplifier with 16-bit accuracy and 900ns settling to 150µV for 10V steps. This unique blend of precision...
Datasheet
LT1469 on Analog.com
LTC7871
Recommended for New Designs
The LTC7871 is a high performance bidirectional buck or boost switching regulator controller that operates in either buck or boost mode on demand. It regulates...
Datasheet
LTC7871 on Analog.com
LTC9103
Recommended for New Designs
The LTC9101-1/LTC9102/LTC9103 chipset is a 48-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 2, 802.3bt Type 3 and...
Datasheet
LTC9103 on Analog.com
LTC2655
Production
The LTC2655 is a family of Quad I2C 16-/12-Bit Rail-to-Rail DACs with integrated 10ppm/°C max reference. The DACs have built-in high performance, rail...
Datasheet
LTC2655 on Analog.com
LTC2444
Production
The LTC2444/LTC2445/LTC2448/LTC2449 are 8-/16- channel (4-/8-differential) high speed 24-bit No Latency ?? ADCs. They use a proprietary delta-sigma architecture...
Datasheet
LTC2444 on Analog.com
LTC7890
Recommended for New Designs
The LTC7890 is a high performance, dual step-down, dc-to-dc switching regulator controller that drives all N-channel synchronous gallium nitride (GaN)...
Datasheet
LTC7890 on Analog.com
LTM8003
Recommended for New Designs
The LTM8003 is a 40VIN, 6A peak, 3.5A continuous stepdown Silent Switcher μModule® (power module) regulator. Included in the package are the switching...
Datasheet
LTM8003 on Analog.com
LT3595A
Production
The LT3595A is a high performance LED Driver designed to drive sixteen independent channels of up to 10 LEDs at currents up to 50mA. Series connection...
Datasheet
LT3595A on Analog.com
LT1573
Not Recommended for New Designs
The LT1573 is a regulator driver IC designed to provide a low cost solution for applications requiring high current, low dropout and fast transient response...
Datasheet
LT1573 on Analog.com
LT1125
Production
The LT1124 dual and LT1125 quad are high performance op amps that offer higher gain, slew rate and bandwidth than the industry standard OP-27 and competing...
Datasheet
LT1125 on Analog.com
LTC4064
Production
The LTC4064 is a standalone linear charger optimized for prolonging the life of 1-cell Li-ion batteries in battery backup applications. By charging to...
Datasheet
LTC4064 on Analog.com
LT3590
Production
The LT3590 is a fixed frequency buck mode converter specifically designed to drive up to 10 LEDs in series from a 48V DC source. Series connection of the...
Datasheet
LT3590 on Analog.com
LTC3801
Production
The LTC3801/LTC3801B are constant frequency current mode step-down DC/DC controllers in a low profile (1mm max) 6-lead SOT-23 (ThinSOT) package. The parts...
Datasheet
LTC3801 on Analog.com
LTC6605-14
Last Time Buy
The LTC6605-14 contains two independent, fully differential amplifiers configured as matched 2nd order 14MHz lowpass filters. The f–3dB of the filters...
LTC6605-14 on Analog.com
LT3957A
Production
The LT3957A is a wide input range, current mode DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured...
Datasheet
LT3957A on Analog.com
LTC1731-8.2
Production
The LTC1731-8.2/LTC1731-8.4 are complete constant-current/constant-voltage linear charger controllers for 2-cell lithium-ion (Li-Ion)batteries. Nickel...
Datasheet
LTC1731-8.2 on Analog.com
LTC4110
Production
The LTC4110 is a complete single chip, high efficiency, ?yback battery charge and discharge manager with automatic switchover between the input supply...
Datasheet
LTC4110 on Analog.com
LT6014
Production
The LT6013 and LT6014 op amps combine low noise and high precision input performance with low power consumption and rail-to-rail output swing. The amplifiers...
Datasheet
LT6014 on Analog.com
LT319A
Production
The LT119A is an improved version of the LM119 dual comparator. It features lower input offset voltage and offset current, higher voltage gain, guaranteed...
Datasheet
LT319A on Analog.com
LT1026
Production
The LT1026 is a switched capacitor voltage doubler and inverter on a single monolithic die. Capable of operating from a 4V to 10V input, it provides ±7V...
Datasheet
LT1026 on Analog.com
LTM4652
Recommended for New Designs
The LTM4652 is a source/sink dual ±25A or single ±50A output switching mode step-down DC/DC μModule® (micromodule) regulator with ±1.5% total DC output...
Datasheet
LTM4652 on Analog.com
LTM8020
Recommended for New Designs
The LTM8020 is a complete 200mA, DC/DC step-down power supply. Included in the package are the switching controller, power switches, inductor, and all...
Datasheet
LTM8020 on Analog.com
LT4321
Recommended for New Designs
The LT4321 is a dual ideal diode bridge controller that enables a Power over Ethernet (PoE) powered device (PD) to receive power in either voltage polarity...
LT4321 on Analog.com
LTC1702A
Production
The LTC1702A is a dual switching regulator controller optimized for high efficiency with low input voltages. It includes two complete, on-chip,independent...
Datasheet
LTC1702A on Analog.com
LT5514
Production
The LT5514 is a programmable gain amplifier (PGA) with bandwidth extending from low frequency (LF) to 850MHz. It consists of a digitally controlled variable...
Datasheet
LT5514 on Analog.com
LTC6801
Not Recommended for New Designs
The LTC6801 is a multicell battery monitoring IC incorporating a 12-bit ADC, a precision voltage reference, sampled comparator, and a high voltage input...
Datasheet
LTC6801 on Analog.com
LT8210-1
Recommended for New Designs
The LT®8210-1 is a 4-switch synchronous buck-boost
DC/DC controller that can operate in pass-thru mode,
forced continuous conduction, or pulse-skipping...
Datasheet
LT8210-1 on Analog.com
LTC3869
Recommended for New Designs
The LTC3869 is a high performance dual synchronous step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages....
Datasheet
LTC3869 on Analog.com
LTC1709-85
Production
The LTC1709-85 is a 2-phase, VID programmable, synchronous step-down switching regulator controller that drives two all N-channel external power MOSFET...
Datasheet
LTC1709-85 on Analog.com
LTC2142-14
Production
The LTC2142-14/LTC2141-14/LTC2140-14 are 2-channel simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2142-14 on Analog.com
LTC2171-14
Production
The LTC2172-14/LTC2171-14/LTC2170-14 are 4-channel, simultaneous sampling 14-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2171-14 on Analog.com
LTC3803-3
Production
The LTC3803-3 is a constant frequency current mode flyback controller optimized for driving N-channel MOSFETs in high input voltage applications. Constant...
Datasheet
LTC3803-3 on Analog.com
LTC1875
Production
The LTC1875 is a high efficiency 1.5A monolithic synchronous buck regulator using a constant frequency, current mode architecture. Operating supply current...
Datasheet
LTC1875 on Analog.com
LT1190
Obsolete
The LT1190 is a video operational amplifier optimized for operation on ±5V, and a single 5V supply. Unlike many high speed amplifiers, this amplifier...
Datasheet
LT1190 on Analog.com
LT3973
Production
The LT3973 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 42V, and consumes only 2.5µA of...
Datasheet
LT3973 on Analog.com
LTC3216
Production
The LTC3216 is a low noise, high current charge pump DC/DC converter designed to power high current LEDs. The part includes an accurate programmable current...
Datasheet
LTC3216 on Analog.com
LT8708-1
Recommended for New Designs
The LT8708-1 is a high performance buck-boost switching regulator controller that is paralleled with the LT8708 to add power and phases to an LT8708 system...
Datasheet
LT8708-1 on Analog.com
LTC1090
Production
The LTC1090 is a data acquisition component which contains a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor technology...
Datasheet
LTC1090 on Analog.com
LTC1591
Production
The LTC1591/LTC1597 are pin compatible, parallel input 14-bit and 16-bit multiplying current output DACs that operate from a single 5V supply. INL and...
Datasheet
LTC1591 on Analog.com
LT6110
Recommended for New Designs
The LT6110 is a precision high side current sense with a current mode output, designed for controlling the output voltage of an adjustable power supply...
Datasheet
LT6110 on Analog.com
LTC2273
Production
The LTC2273/LTC2272 are 80Msps/65Msps, 16-bit A/D converters with a high speed serial interface. They are designed for digitizing high frequency, wide...
Datasheet
LTC2273 on Analog.com
LTC4162-F
Recommended for New Designs
The LTC4162-F is an advanced monolithic synchronous step-down switching battery charger and PowerPathâ„¢ manager that seamlessly manages power distribution...
Datasheet
LTC4162-F on Analog.com
LT3080-1
Recommended for New Designs
The LT3080-1 is a 1.1A low dropout linear regulator that incorporates an internal ballast resistor to allow direct paralleling of devices without the need...
Datasheet
LT3080-1 on Analog.com
LTC3418
Production
The LTC3418 is a high efficiency, monolithic synchronous step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates...
Datasheet
LTC3418 on Analog.com
LTC2913
Production
The LTC2913 is a dual input voltage monitor intended for multiple voltages in a variety of applications. Dual inputs for each voltage allow monitoring...
Datasheet
LTC2913 on Analog.com
LT1303
Production
The LT1303/LT1303-5 are micropower step-up high efficiency DC/DC converters using Burst Modeâ„¢ operation. They are ideal for use in small, low-voltage...
Datasheet
LT1303 on Analog.com
LTC3546
Production
The LTC3546 is a dual, constant-frequency, synchronous step down DC/DC converter for medium power applications. The design consists of 2A and 1A primary...
Datasheet
LTC3546 on Analog.com
LTC1430A
Production
The LTC1430A is a high power, high efficiency switching regulator controller optimized for 5V to 1.xV-3.xV applications. It includes a precision internal...
Datasheet
LTC1430A on Analog.com
LTC1863L
Production
The LTC1863L/LTC1867L are pin compatible, 8-channel 12-/16-bit A/D converters with serial I/O and an internal reference.
The 8-channel input multiplexer...
Datasheet
LTC1863L on Analog.com
LTC2372-18
Production
The LTC2372-18 is a low noise, high speed, 8-channel 18-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2372...
Datasheet
LTC2372-18 on Analog.com
LT1464
Production
The LT1464 (dual) and LT1465 (quad) are the first micropower op amps (200µA max per amp) to offer picoampere input bias currents (500fA typ) and unity...
Datasheet
LT1464 on Analog.com
LTC3309A
Recommended for New Designs
The LTC3309A is a very small, high efficiency, low noise, monolithic synchronous 6A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3309A on Analog.com
LTC3727-1
Production
The LTC3727/LTC3727-1 are high performance dual step-down switching regulator controllers that drive all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3727-1 on Analog.com
LTC1626
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1626 is a monolithic, low voltage, step-down current...
Datasheet
LTC1626 on Analog.com
LT5578
Production
The LT5578 mixer is a high performance upconverting mixer optimized for frequencies in the 0.4GHz to 2.7GHz range. The single-ended LO input and RF output...
Datasheet
LT5578 on Analog.com
LTC2143-12
Production
The LTC2145-12/LTC2144-12/LTC2143-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2143-12 on Analog.com
LTC1044A
Production
The LTC1044A is a monolithic CMOS switched-capacitor voltage converter. It plugs in for ICL7660/LTC1044 in applications where higher input voltage (up...
Datasheet
LTC1044A on Analog.com
LTC2424
Production
The LTC2424/LTC2428 are 4-/8-channel 2.7V to 5.5V micropower 20-bit A/D converters with an integrated oscillator, 8ppm INL and 1.2ppm RMS noise. They use...
Datasheet
LTC2424 on Analog.com
LTC4255
Production
The LTC4255 is a quad –48V network power controller with independent relay drivers and I²C compatible interface. Each channel can be turned on and off...
Datasheet
LTC4255 on Analog.com
LTC1422
Production
The LTC1422 is an 8-pin Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass...
Datasheet
LTC1422 on Analog.com
LTC1294
Production
The LTC1293/4/6 is a family of data acquisition systems which contain a serial I/O successive approximation A/D converter. It uses LTCMOS™ switched capacitor...
Datasheet
LTC1294 on Analog.com
LT3481
Production
The LT3481 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high...
Datasheet
LT3481 on Analog.com
LT1711
Production
The LT1711 is 4.5ns comparator featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized for 3V and 5V power supplies...
Datasheet
LT1711 on Analog.com
LTC1482
Production
The LTC1482 is a low power RS485 compatible transceiver that offers an active low carrier detect output. The open-drain carrier detect pin allows several...
Datasheet
LTC1482 on Analog.com
LT1331
Production
The LT1331 is a 3-driver, 5-receiver RS232 transceiver designed for 3V and mixed 3V/5V systems. Receivers operate from 3V logic supply VL, while the onboard...
Datasheet
LT1331 on Analog.com
LTM4601HV
Production
The LTM4601HV is a complete 12A step-down switch mode DC/DC power supply with onboard switching controller, MOSFETs, inductor and all support components...
Datasheet
LTM4601HV on Analog.com
LTC2862A
Production
The LTC2862A is a low power, 20Mbps or 250kbps RS485/RS422 transceiver operating on 3V to 5.5V supplies with ±60V overvoltage fault protection on the...
Datasheet
LTC2862A on Analog.com
LT3579
Recommended for New Designs
The LT3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature...
Datasheet
LT3579 on Analog.com
LTC1689
Production
The LTC1688/LTC1689 are ultrahigh speed, differential bus/line drivers that can operate at data rates up to 100Mbps. Propagation delay is guaranteed at...
Datasheet
LTC1689 on Analog.com
LTC3520
Recommended for New Designs
The LTC3520 combines 1A buck-boost and 600mA synchronous buck DC/DC converters in a tiny 4mm x 4mm package. A programmable switching frequency allows the...
Datasheet
LTC3520 on Analog.com
LT1087
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT1087 is a variation of the LT1084 Adjustable Low Dropout...
Datasheet
LT1087 on Analog.com
LT1466L
Production
The LT1466L/LT1467L are dual/quad bipolar op amps that combine rail-to-rail input and output operation with precision specifications. Using a patented...
Datasheet
LT1466L on Analog.com
LTC6229
Last Time Buy
The LTC6228/LTC6229 are single/dual very fast, low noise rail-to-rail output, unity gain stable op amps. They have a gain-bandwidth product of 890MHz and...
Datasheet
LTC6229 on Analog.com
LT1033
Production
The LT1033 negative adjustable regulator will deliver up to 3A output current over an output voltage range of –1.2V to –32V, with better line and load...
Datasheet
LT1033 on Analog.com
LTC2157-12
Production
The LTC2157-12/LTC2156-12/LTC2155-12 are a family of dual 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2157-12 on Analog.com
LTC1876
Production
The LTC1876 is a high performance triple output switching regulator. It incorporates a dual step-down switching controller that drives all N-channel synchronous...
Datasheet
LTC1876 on Analog.com
LTC2204
Production
The LTC2205/LTC2204 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals up to input frequencies of 700MHz...
Datasheet
LTC2204 on Analog.com
LTC3867
Recommended for New Designs
The LTC3867 is a current mode synchronous step-down switching regulator controller that drives all N-channel power MOSFET stages. Output voltage transient...
Datasheet
LTC3867 on Analog.com
LTC3621
Recommended for New Designs
The LTC3621/LTC3621-2 is a high efficiency 17V, 1A synchronous monolithic step-down regulator. The switching frequency is fixed to 1MHz or 2.25MHz with...
Datasheet
LTC3621 on Analog.com
LT1977
Production
The LT1977 is a 500kHz monolithic buck switching regulator that accepts input voltages up to 60V. A high efficiency 1.5A, 0.2? switch is included on the...
Datasheet
LT1977 on Analog.com
LT3800
Production
The LT3800 is a 200kHz fixed frequency high voltage synchronous current mode step-down switching regulator controller. The IC drives standard gate N-channel...
Datasheet
LT3800 on Analog.com
LTC3336
Recommended for New Designs
The LTC3336 is a compact high efficiency nanopower hysteretic buck DC/DC which can deliver up to 250mA of output current from a 2.5V to 15V input. Input...
Datasheet
LTC3336 on Analog.com
LTC4041
Recommended for New Designs
The LTC4041 is a complete supercapacitor backup system for 2.9V to 5.5V supply rails. It contains a high current step-down DC/DC converter to charge a...
Datasheet
LTC4041 on Analog.com
LTC1759
Production
The LTC1759 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS compliant system. The LTC1759...
Datasheet
LTC1759 on Analog.com
LTC1929
Production
The LTC1929/LTC1929-PG are 2-phase, single output, synchronous step-down current mode switching regulator controllers that drive N-channel external power...
Datasheet
LTC1929 on Analog.com
LTC5509
Production
The LTC5509 is an RF power detector for RF applications
operating in the 300MHz to 3GHz range. A temperature
compensated Schottky diode peak detector and...
Datasheet
LTC5509 on Analog.com
LTC3240
Production
The LTC3240-3.3/LTC3240-2.5 are step-up/step-down charge pump DC/DC converters that produce a fixed regulated output voltage of 3.3V or 2.5V over a wide...
Datasheet
LTC3240 on Analog.com
LTC3672B-1
Production
The LTC3672B-1 is a triple power supply composed of a 400mA synchronous buck regulator and two 150mA low dropout linear regulators (LDOs), where one of...
Datasheet
LTC3672B-1 on Analog.com
LTM4628
Production
The LTM4628 is a complete dual 8A output switching mode DC/DC power supply and can be easily configured to provide a single 2-phase 16A output. Included...
LTM4628 on Analog.com
LT4254
Production
The LT4254 is a high voltage Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. An internal driver controls...
Datasheet
LT4254 on Analog.com
LT7200S
Recommended for New Designs
The LT7200S is a quad-channel, high efficiency monolithic synchronous buck regulator, capable of sinking/sourcing 5A to the load per channel. Its multichannel...
Datasheet
LT7200S on Analog.com
LTC1159
Production
The LTC1159 series is a family of synchronous step-down switching regulator controllers featuring automatic Burst Mode™ operation to maintain high efficiencies...
Datasheet
LTC1159 on Analog.com
LTC3577-3
Production
The LTC3577-3/LTC3577-4 are highly integrated power management ICs for single cell Li-Ion/Polymer battery applications. It includes a PowerPath manager...
Datasheet
LTC3577-3 on Analog.com
LTC3632
Production
The LTC3632 is a high efficiency, high voltage step-down DC/DC converter with internal high side and synchronous power switches that draws only 12µA typical...
Datasheet
LTC3632 on Analog.com
LT6402-6
Recommended for New Designs
The LT6402-6 is a low distortion, low noise differential amplier/ADC driver for use in applications from DC to 300MHz. The LT6402-6 has been designed for...
Datasheet
LT6402-6 on Analog.com
LT3580
Production
The LT3580 is a PWM DC/DC converter containing an internal 2A, 42V switch. The LT3580 can be configured as either a boost, SEPIC or inverting converter...
Datasheet
LT3580 on Analog.com
LT1762
Recommended for New Designs
The LT1762 series are micropower, low noise, low
dropout regulators. The devices are capable of supplying
150mA of output current with a dropout voltage...
Datasheet
LT1762 on Analog.com
LTM4634
Recommended for New Designs
The LTM4634 integrates three complete 5A/5A/4A high efficiency switching mode DC/DC converters into one small package. Switching controllers, power FETs...
Datasheet
LTM4634 on Analog.com
LT1716
Production
The LT1716 comparator operates on any total power supply voltage between 2.7V and 44V drawing 35µA of quiescent current. The LT1716 has a unique input...
Datasheet
LT1716 on Analog.com
LT3971A
Production
The LT3971A is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 38V. Low quiescent current design...
Datasheet
LT3971A on Analog.com
LT1210X
Recommended for New Designs
The LT1210X is a current feedback amplifier with high
output current and excellent large-signal characteristics.
The combination of high slew rate, 1.0A...
Datasheet
LT1210X on Analog.com
LTC3813
Production
The LTC3813 is a synchronous step-up switching regulator controller that can generate output voltages up to 100V. The LTC3813 uses a constant off-time...
Datasheet
LTC3813 on Analog.com
LTC3701
Production
The LTC3701 is a 2-phase dual constant frequency current mode step-down DC/DC controller providing excellent load and line regulation. Power loss and noise...
Datasheet
LTC3701 on Analog.com
LTC1416
Production
The LTC1416 is a 2.2µs, 400ksps, 14-bit sampling A/D converter that draws only 70mW from ±5V supplies. This easy-to-use device includes a high dynamic...
Datasheet
LTC1416 on Analog.com
LTC4055
Production
The LTC4055/LTC4055-1 are USB power manager and Li-Ion battery chargers designed to work in portable battery-powered applications. The parts manage and...
Datasheet
LTC4055 on Analog.com
LTC3458L
Recommended for New Designs
The LTC3458L is a high efficiency, current mode, fixed frequency, step up DC/DC converter with true output disconnect and inrush current limiting. The...
Datasheet
LTC3458L on Analog.com
LTC4260
Recommended for New Designs
The LTC4260 Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the...
Datasheet
LTC4260 on Analog.com
LTC5508
Production
The LTC5508 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and...
Datasheet
LTC5508 on Analog.com
LTC2313-12
Production
The LTC2313-12 is a 12-bit, 2.5Msps, serial sampling A/D converter that draws only 5mA from a single 3V or 5V supply. The LTC2313-12 contains an integrated...
Datasheet
LTC2313-12 on Analog.com
LTC4162-L
Recommended for New Designs
The LTC4162-L is an advanced monolithic synchronous step-down switching battery charger and PowerPath™ manager that seamlessly manages power distribution...
Datasheet
LTC4162-L on Analog.com
LTC1321
Production
The LTC1321/LTC1322/LTC1335 are low power CMOS bidirectional transceivers, each featuring two reconfigurable interface ports. Each can be configured as...
Datasheet
LTC1321 on Analog.com
LT1787
Production
The LT1787 is a complete micropower precision high side current sense amplifier. The LT1787 monitors bidirectional currents via the voltage across an external...
Datasheet
LT1787 on Analog.com
LTC6419
Recommended for New Designs
The LTC6419 is a dual very high speed, low distortion, differential amplifier. Its input common mode range includes ground, so that a ground-referenced...
Datasheet
LTC6419 on Analog.com
LTC2181
Production
The LTC2182/LTC2181/LTC2180 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2181 on Analog.com
LTC3125
Recommended for New Designs
The LTC3125 is a high efficiency, synchronous step-up DC/DC converter with an accurate programmable average input current limit. The resistor programmable...
Datasheet
LTC3125 on Analog.com
LTC1265
Production
The LTC1265 is a monolithic step-down current mode DC/DC converter featuring Burst Mode™ operation at low output current. The LTC1265 incorporates a 0...
Datasheet
LTC1265 on Analog.com
LTC2936
Recommended for New Designs
The LTC2936 is an EEPROM configurable voltage supervisor which can simultaneously monitor up to six power supply voltage inputs. Each voltage detector...
Datasheet
LTC2936 on Analog.com
LT3435
Production
The LT3435 is a 500kHz monolithic buck switching regulator that accepts input voltages up to 60V. A high efficiency 3A, 0.1O switch is included on the...
Datasheet
LT3435 on Analog.com
LT8645S-2
Recommended for New Designs
The LT8645S-2 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency...
Datasheet
LT8645S-2 on Analog.com
LT1009
Production
The LT1009 is a precision trimmed 2.5V shunt regulator diode featuring a maximum initial tolerance of only ±5mV. The low dynamic impedance and wide operating...
Datasheet
LT1009 on Analog.com
LT1366
Production
The LT1366/LT1367/LT1368/LT1369 are dual and quad bipolar op amps which combine rail-to-rail input and output operation with precision specifications....
Datasheet
LT1366 on Analog.com
LTC3553-2
Recommended for New Designs
The LTC3553-2 is a micropower, highly integrated power management and battery charger IC for single-cell Li-Ion/Polymer battery applications. It includes...
Datasheet
LTC3553-2 on Analog.com
LTC3103
Recommended for New Designs
The LTC3103 is a high efficiency, monolithic synchronous step-down converter using a current mode architecture capable of supplying 300mA of output current...
Datasheet
LTC3103 on Analog.com
LTC3547B
Production
The LTC3547B is a dual, 2.25MHz, constant-frequency, synchronous step-down DC/DC converter in a tiny 3mm × 2mm DFN package. 100% duty cycle provides low...
Datasheet
LTC3547B on Analog.com
LTC3802
Production
The LTC3802 is a dual switching regulator controller optimized for high efficiency step-down conversion from input voltages between 3V to 30V. The controller...
Datasheet
LTC3802 on Analog.com
LTC4311
Production
The LTC4311 is a dual I2C active pull-up designed to enhance data transmission speed and reliability for bus loading conditions well beyond the 400pF I2C...
Datasheet
LTC4311 on Analog.com
LTC2857
Production
The LTC2856-1, LTC2856-2, LTC2857-1, LTC2857-2, LTC2858-1 and LTC2858-2 are low power, RS485/RS422 transceivers operating on 5V supplies at maximum data...
Datasheet
LTC2857 on Analog.com
LTC6363
Last Time Buy
The LTC6363 family consists of four fully differential, low power, low noise amplifiers with rail-to-rail outputs optimized to drive SAR ADCs. The LTC6363...
LTC6363 on Analog.com
LTM8061
Recommended for New Designs
The LTM8061 is a high efficiency 32V, 2A µModule® (power module) standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed...
Datasheet
LTM8061 on Analog.com
LTC2440
Production
The LTC2440 is a high speed 24-bit No Latency ??™ ADC with 5ppm INL and 5µV offset. It uses proprietary Delta Sigma architecture enabling variable speed...
Datasheet
LTC2440 on Analog.com
LTC2483
Production
The LTC2483 combines a 16-bit plus sign No Latency ?S™ analog-to-digital converter with patented Easy Drive technology and I2C digital interface. The patented...
Datasheet
LTC2483 on Analog.com
LT1141A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1141A on Analog.com
LTC3445
Production
The LTC3445 contains a high efficiency monolithic synchronous current mode buck regulator, two LDO regulators, a PowerPathâ„¢ controller and an I2Câ„¢...
Datasheet
LTC3445 on Analog.com
LTC7124
Recommended for New Designs
The LTC7124 is a dual channel, 3.5A per output, high efficiency monolithic step-down regulator capable of operating from input supplies up to 17V. The...
Datasheet
LTC7124 on Analog.com
LTC2927
Recommended for New Designs
The LTC2927 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supply can be configured...
Datasheet
LTC2927 on Analog.com
LTC7815
Production
The LTC7815 is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET...
Datasheet
LTC7815 on Analog.com
LT1768
Production
The LT1768 is designed to control single or multiple cold cathode fluorescent lamp (CCFL) displays. A unique Multimode Dimming scheme* combines both linear...
Datasheet
LT1768 on Analog.com
LTC1427-50
Production
The LTC1427-50 is a micropower, 10-Bit current output DAC with an output range of 0µA to 50µA. The DAC output is guaranteed monotonic and DNL is less than...
Datasheet
LTC1427-50 on Analog.com
LT1254
Production
The LT1253 is a low cost dual current feedback amplifier for video applications. The LT1254 is a quad version of the LT1253. The amplifiers are completely...
Datasheet
LT1254 on Analog.com
LTM4686-1
Recommended for New Designs
The LTM4686 is a dual 10A (12A Peak) or single 20A (24A Peak) step-down µModule® (micromodule) DC/DC regulator with 39ms turn-on time. It features remote...
Datasheet
LTM4686-1 on Analog.com
LTC2365
Production
The LTC2365/LTC2366 are 1Msps/3Msps, 12-bit, sampling A/D converters that draw only 2mA and 2.6mA, respectively, from a single 3V supply. These high performance...
Datasheet
LTC2365 on Analog.com
LTC3866
Recommended for New Designs
The LTC3866 is a single phase current mode synchronous step-down switching regulator controller that drives all N-channel power MOSFET switches. It employs...
Datasheet
LTC3866 on Analog.com
LT1684
Not Recommended for New Designs
The LT1684 is a telecommunication ring tone generator. The IC takes a user-generated pulse width modulated (PWM) input and converts it to a high voltage...
Datasheet
LT1684 on Analog.com
LTC3888-1
Recommended for New Designs
The LTC3888/LTC3888-1/LTC3888-2 is a PMBus-compliant dual loop DC/DC synchronous step-down switching regulator controller with eight expandable phases...
Datasheet
LTC3888-1 on Analog.com
LTC3250
Production
The LTC3250-1.5/LTC3250-1.2 are charge pump step-down DC/DC converters that produce a 1.5V or 1.2V regulated output from a 2.7V to 5.5V input. The parts...
Datasheet
LTC3250 on Analog.com
LT3744
Production
The LT3744 is a fixed frequency synchronous step-down DC/DC controller designed to drive a LED load at up to 20A continuous or 40A pulsed. The peak current...
Datasheet
LT3744 on Analog.com
LTC3115-1
Recommended for New Designs
The LTC3115-1 is a high voltage monolithic synchronous buck-boost DC/DC converter. Its wide 2.7V to 40V input and output voltage ranges make it well suited...
Datasheet
LTC3115-1 on Analog.com
LT8610AX
Recommended for New Designs
The LT8610AX is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator rated to 175°C junction temperature. The LT8610AX...
Datasheet
LT8610AX on Analog.com
LTC4066
Production
The LTC4066/LTC4066-1 are USB power managers and Li-Ion battery chargers designed to work in portable battery-powered applications. The parts control the...
Datasheet
LTC4066 on Analog.com
LT1112
Production
The LT1112 dual and LT1114 quad op amps achieve a new standard in combining low cost and outstanding precision specifications.
The performance of the selected...
Datasheet
LT1112 on Analog.com
LT1281A
Production
The LT1280A/LT1281A are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits...
Datasheet
LT1281A on Analog.com
LTC2208-14
Production
The LTC2208-14 is a 130Msps, sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals with input frequencies up...
Datasheet
LTC2208-14 on Analog.com
LTC2144-12
Production
The LTC2145-12/LTC2144-12/LTC2143-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2144-12 on Analog.com
LTC2445
Production
The LTC2444/LTC2445/LTC2448/LTC2449 are 8-/16- channel (4-/8-differential) high speed 24-bit No Latency ?? ADCs. They use a proprietary delta-sigma architecture...
Datasheet
LTC2445 on Analog.com
LTC2282
Production
The LTC2282 is a 12-bit 105Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2282 is perfect...
Datasheet
LTC2282 on Analog.com
LTC4308
Production
The LTC4308 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4308...
Datasheet
LTC4308 on Analog.com
LTC4067
Production
The LTC4067 is a USB power management and Li-Ion/ Polymer battery charger designed for portable battery powered applications. The part controls total current...
Datasheet
LTC4067 on Analog.com
LTC1558
Not Recommended for New Designs
Not Recommended For New Designs. Contact Analog Devices for Potential Replacement.
The LTC1558 is a backup battery controller that provides all the functions...
Datasheet
LTC1558 on Analog.com
LTC1706-61
Production
The LTC1706-61 is a precision, digitally programmed, resistive ladder which adjusts the output of any 0.6V referenced regulator. Depending on the state...
Datasheet
LTC1706-61 on Analog.com
LTC1390
Production
The LTC1390 is a high performance CMOS 8-to-1 analog multiplexer. It features a 3-wire digital interface with a bidirectional data retransmission feature...
Datasheet
LTC1390 on Analog.com
LTM2882
Production
The LTM2882 is a complete galvanically isolated dual RS232 µModule® (micromodule) transceiver. No external components are required. A single 3.3V or 5V...
Datasheet
LTM2882 on Analog.com
LT6020
Recommended for New Designs
The LT6020 is a low power, enhanced slew rate, precision operational amplifier. The proprietary circuit topology of this amplifier gives excellent slew...
Datasheet
LT6020 on Analog.com
LTC1152
Production
The LTC1152 is a high performance, low power zero-drift op amp featuring an input stage that common modes to both power supply rails and an output stage...
Datasheet
LTC1152 on Analog.com
LT1368
Production
The LT1366/LT1367/LT1368/LT1369 are dual and quad bipolar op amps which combine rail-to-rail input and output operation with precision specifications....
Datasheet
LT1368 on Analog.com
LTC2870
Production
The LTC2870/LTC2871 are robust pin-configurable multiprotocol transceivers, supporting RS232, RS485, and RS422 protocols, operating on a single 3V to 5...
Datasheet
LTC2870 on Analog.com
LTC1288
Production
The LTC1285/LTC1288 are 3V micropower, 12-bit, successive approximation sampling A/D converters. They typically draw only 160µA of supply current when...
Datasheet
LTC1288 on Analog.com
LTC3637
Recommended for New Designs
The LTC3637 is a high efficiency step-down DC/DC regulator with an internal high side power switch that draws only 12µA DC supply current while maintaining...
Datasheet
LTC3637 on Analog.com
LT1389
Production
The LT1389 is a nanopower, precision shunt voltage reference. The bandgap reference uses trimmed precision thin-film resistors and improved curvature correction...
Datasheet
LT1389 on Analog.com
LTC2341-16
Production
The LTC2341-16 is a 16-bit, low noise 2-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range...
Datasheet
LTC2341-16 on Analog.com
LT1034
Production
The LT1034 is a micropower, precision 1.2V/2.5 reference combined with a 7V auxiliary reference. The 1.2V/2.5V reference is a trimmed, thin-film, band...
Datasheet
LT1034 on Analog.com
LT582X
Production
Datasheet
LT582X on Analog.com
LT117AHV
Not Recommended for New Designs
OBSOLETE PRODUCT Data Sheet For Reference Only
The LT117AHV Series are 3-terminal positive adjustable voltage regulators which offer improved performance...
Datasheet
LT117AHV on Analog.com
LTC3833
Recommended for New Designs
The LTC3833 is a synchronous step-down DC/DC switching regulator controller targeted for high power applications. It drives all N-channel power MOSFETs...
Datasheet
LTC3833 on Analog.com
LTM8040
Production
The LTM8040 is a fixed frequency 1A step-down DC/DC µModule® (power module) regulator designed to operate as a constant current source. Internal circuitry...
Datasheet
LTM8040 on Analog.com
LT7176-1
Pre release
The LT7176/LT7176-1 are monolithic PolyPhase DC/DC
synchronous step-down regulators that deliver up to
24A of continuous output current. The LT7176-1 option...
Datasheet
LT7176-1 on Analog.com
LTC1872B
Production
The LTC1872B is a constant frequency current mode step-up DC/DC controller providing excellent AC and DC load and line regulation. The device incorporates...
Datasheet
LTC1872B on Analog.com
LTC4316
Production
The LTC4316 enables the hardwired address of one or more I2C or SMBus slave devices to be translated to a different address. This allows slaves with the...
Datasheet
LTC4316 on Analog.com
LTC3777
Recommended for New Designs
The LTC3777 is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage...
Datasheet
LTC3777 on Analog.com
LTC6802-1
Not Recommended for New Designs
The LTC6802-1 is a complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer and a serial...
Datasheet
LTC6802-1 on Analog.com
LTC3719
Production
The LTC3719 is a 2-phase, VID programmable, synchronous step-down switching regulator controller that drives two N-channel external power MOSFET stages...
Datasheet
LTC3719 on Analog.com
LTC202
Production
The LTC201A, LTC202, and LTC203 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single...
Datasheet
LTC202 on Analog.com
LTC2324-14
Production
The LTC2324-14 is a low noise, high speed quad 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2324-14 on Analog.com
LTM2895
Production
The LTM2895 is a high speed isolated µModule® (micromodule) SPI interface with DAC control signals designed to isolate LTC’s family of general purpose...
Datasheet
LTM2895 on Analog.com
LT1930
Production
The LT1930 and LT1930A are the industry's highest power SOT-23 switching regulators. Both include an internal 1A, 36V switch allowing high current outputs...
Datasheet
LT1930 on Analog.com
LT1161
Production
The LT1161 is a quad high-side gate driver allowing the use of low cost N-channel power MOSFETs for high-side switching applications. It has four independent...
Datasheet
LT1161 on Analog.com
LTC1324
Obsolete
Obsolete Product - Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1324 is a single 5V line transceiver...
Datasheet
LTC1324 on Analog.com
LT1819
Production
The LT1818/LT1819 are single/dual wide bandwidth, high slew rate, low noise and distortion operational amplifiers with excellent DC performance. The LT1818...
Datasheet
LT1819 on Analog.com
LTC2389-16
Production
The LTC2389-16 is a low noise, high speed 16-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2389-16 supports...
Datasheet
LTC2389-16 on Analog.com
LT3430
Production
The LT3430/LT3430-1 are monolithic buck switching regulators that accept input voltages up to 60V. A high efficiency 3A, 0.1O switch is included on the...
Datasheet
LT3430 on Analog.com
LTC5592
Production
The LTC5592 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The...
Datasheet
LTC5592 on Analog.com
LT1637
Production
The LT1637 is a rugged op amp that operates on all single and split supplies with a total voltage of 2.7V to 44V. The LT1637 has a gain-bandwidth product...
Datasheet
LT1637 on Analog.com
LT3518
Production
The LT3518 is a current mode DC/DC converter with an internal 2.3A, 45V switch specifically designed to drive LEDs. The LT3518 operates as a LED driver...
Datasheet
LT3518 on Analog.com
LTC2357-16
Production
The LTC2357-16 is a 16-bit, low noise 4-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common...
Datasheet
LTC2357-16 on Analog.com
LT1397
Production
The LT1395/LT1396/LT1397 are single/dual/quad 400MHz current feedback amplifiers with an 800V/µs slew rate and the ability to drive up to 80mA of output...
Datasheet
LT1397 on Analog.com
LTC6401-8
Last Time Buy
The LTC6401-8 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive...
LTC6401-8 on Analog.com
LTC3835-1
Production
The LTC3835-1 is a high performance step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A constant-frequency...
Datasheet
LTC3835-1 on Analog.com
LTC1064-4
Production
The LTC1064-4 is an 8th order, clock sweepable Cauer lowpass switched capacitor filter. An external TTL or CMOS clock programs the value of the filters...
Datasheet
LTC1064-4 on Analog.com
LTC2923
Recommended for New Designs
The LTC2923 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supplies can be configured...
Datasheet
LTC2923 on Analog.com
LT1120A
Not Recommended for New Designs
The LT1120A is a combination micropower positive regulator and free collector comparator on a single monolithic chip. With only 20µA supply current, the...
Datasheet
LT1120A on Analog.com
LTC3561A
Production
The LTC3561A is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input...
Datasheet
LTC3561A on Analog.com
LTC1503
Production
The LTC1503-1.8/LTC1503-2 are switched capacitor step-down DC/DC converters that produce a regulated output from a 2.4V to 6V input. The parts use switched...
Datasheet
LTC1503 on Analog.com
LTC2377-20
Production
The LTC2377-20 is a low noise, low power, high speed 20-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2377-20 has...
Datasheet
LTC2377-20 on Analog.com
LT8331
Recommended for New Designs
The LT8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture...
Datasheet
LT8331 on Analog.com
LT123A
Obsolete
The "K" Package has been Obsoleted
The LT123A/LT323A is an improved version of the popular LM123/LM323 5 Volt, 3 Amp Regulator. These new devices offer...
Datasheet
LT123A on Analog.com
LT1209
Last Time Buy
The LT1208/LT1209 are dual and quad very high speed operational amplifiers with excellent DC performance.The LT1208/LT1209 feature reduced input offset...
Datasheet
LT1209 on Analog.com
LTC3114-1
Recommended for New Designs
The LTC3114-1 is a versatile, wide operating voltage range synchronous monolithic buck-boost DC/DC converter with programmable average output current....
Datasheet
LTC3114-1 on Analog.com
LT1807
Production
The LT1806/LT1807 are single/dual low noise rail-to-rail input and output unity-gain stable op amps that feature a 325MHz gain-bandwidth product, a 140V...
Datasheet
LT1807 on Analog.com
LT1022
Production
The LT1022 JFET input operational amplifier combines high speed and precision performance.
A 26V/µs slew rate and 8.5MHz gain-bandwidth product are simultaneously...
Datasheet
LT1022 on Analog.com
LTC2265-12
Production
The LTC2265-12/LTC2264-12/LTC2263-12 are 2-channel, simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2265-12 on Analog.com
LTC2951
Recommended for New Designs
The LTC2951 is a micropower, wide input voltage range pushbutton ON/OFF controller. The part contains a pushbutton input which controls the toggling of...
Datasheet
LTC2951 on Analog.com
LTC1861L
Production
The LTC1860L/LTC1861L are 12-bit A/D converters that are offered in MSOP and SO-8 packages and operate on a single 3V supply. At 150ksps, the supply current...
Datasheet
LTC1861L on Analog.com
LTC2854
Production
The LTC2854 and LTC2855 are low power, 20Mbps RS485/RS422 transceivers operating on 3.3V supplies. The receiver includes a logic-selectable 120Ω termination...
Datasheet
LTC2854 on Analog.com
LTC7132
Recommended for New Designs
The LTC7132 is a dual output PolyPhase DC/DC synchronous step-down monolithic regulator with an I2C-based PMBus compliant serial interface. The regulator...
Datasheet
LTC7132 on Analog.com
LT3510
Production
The LT3510 is a dual current mode PWM step-down DC/DC converter with two internal 2.5A switches. Independent input voltage, feedback, soft-start and power...
Datasheet
LT3510 on Analog.com
LTC1734L
Production
The LTC1734L is a low cost, single cell, constant-current/constant-voltage Li-Ion battery charger controller. When combined with a few external components...
Datasheet
LTC1734L on Analog.com
LTC6360
Last Time Buy
The LTC6360 is a very low noise, high precision, high speed amplifier suitable for driving SAR ADCs. The LTC6360 features a total output noise of 2.3nV...
LTC6360 on Analog.com
LTC2933
Production
The LTC2933 is an EEPROM configurable voltage supervisor which can simultaneously monitor up to six power supply voltage inputs. Each voltage detector...
Datasheet
LTC2933 on Analog.com
LTC3337
Recommended for New Designs
The LTC3337 is a primary battery state of health (SOH) monitor with a built-in precision coulomb counter. It is designed to be placed in series with a...
Datasheet
LTC3337 on Analog.com
LTC3499
Recommended for New Designs
The LTC3499/LTC3499B are synchronous, fixed frequency step-up DC/DC power converters with integrated reverse battery protection that protect and disconnect...
Datasheet
LTC3499 on Analog.com
LTC1487
Production
The LTC1487 is an ultra-low power differential line transceiver designed with high impedance inputs allowing up to 256 transceivers to share a single bus...
Datasheet
LTC1487 on Analog.com
LT1425
Production
The LT1425 is a monolithic high power switching regulator specifically designed for the isolated flyback topology. No “third winding” or optoisolator is...
Datasheet
LT1425 on Analog.com
LTC2633
Production
The LTC2633 is a family of dual 12-, 10-, and 8-bit voltage-output DACs with an integrated, high accuracy, low drift reference in an 8-lead TSOT-23 package...
Datasheet
LTC2633 on Analog.com
LT3959
Production
The LT3959 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single...
Datasheet
LT3959 on Analog.com
LTC1094
Production
The high impedance analog inputs and the ability to operate with reduced spans (below 1V full scale) allow direct connection to sensors and transducers...
Datasheet
LTC1094 on Analog.com
LTC2141-12
Production
The LTC2142-12/LTC2141-12/LTC2140-12 are 2-channel simultaneous sampling 12-bit A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2141-12 on Analog.com
LT3581
Recommended for New Designs
The LT3581 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltages, and...
Datasheet
LT3581 on Analog.com
LTC4314
Production
The LTC4314 is a hot-swappable 4-channel 2-wire bus multiplexer that allows one upstream bus to connect to any combination of downstream busses or channels...
Datasheet
LTC4314 on Analog.com
LTC2654
Production
The LTC2654 is a family of quad 16-/12-bit rail-to-rail DACs with integrated 10ppm/°C maximum reference . The DACs have built-in high performance, rail...
Datasheet
LTC2654 on Analog.com
LTC6803-2
Not Recommended for New Designs
The LTC6803 is a 2nd generation, complete battery monitoring IC that includes a 12-bit ADC, a precision voltage reference, a high voltage input multiplexer...
Datasheet
LTC6803-2 on Analog.com
LTC5555
Recommended for New Designs
The LTC5555 programmable gain downconverting mixer is ideal for receivers that require precise gain setting. The IC incorporates an active mixer and a...
Datasheet
LTC5555 on Analog.com
LTC3766
Recommended for New Designs
The LTC3766 is a PolyPhase-capable secondary-side controller for synchronous forward converters. When used in conjunction with the LTC3765 active-clamp...
Datasheet
LTC3766 on Analog.com
LTC3870-1
Recommended for New Designs
The LTC3870-1 is a PolyPhase® step-down slave controller specially designed for multiphase operation with LTC's digital power system management DC/DC...
Datasheet
LTC3870-1 on Analog.com
LTC4235
Recommended for New Designs
The LTC4235 offers ideal diode-OR and Hot Swap™ functions for two 12V power rails by controlling external N-channel MOSFETs. MOSFETs acting as ideal diodes...
Datasheet
LTC4235 on Analog.com
LT1103
Obsolete
Obsolete: Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement
The LT1103 Offline Switching Regulator is designed...
Datasheet
LT1103 on Analog.com
LTC3880
Recommended for New Designs
The LTC3880/LTC3880-1 are dual, PolyPhase DC/DC synchronous step-down switching regulator controllers with an I2C-based PMBus compliant serial interface...
Datasheet
LTC3880 on Analog.com
LTC3533
Recommended for New Designs
The LTC3533 is a wide VIN range, highly efficient, fixed frequency, buck-boost DC/DC converter that operates from input voltages above, below or equal...
Datasheet
LTC3533 on Analog.com
LTC2950
Recommended for New Designs
The LTC2950 is a micropower, wide input voltage range, pushbutton ON/OFF controller. The part contains a pushbutton input with independently programmable...
Datasheet
LTC2950 on Analog.com
LTC1603
Production
The LTC1603 is a 250ksps, 16-bit sampling A/D converter that draws only 220mW from ±5V supplies. This high performance device includes a high dynamic range...
Datasheet
LTC1603 on Analog.com
LTC4155
Recommended for New Designs
The LTC4155 is a 15 watt I2C controlled power manager with PowerPath™ instant-on operation, high efficiency switching battery charging and USB compatibility...
Datasheet
LTC4155 on Analog.com
LTC4054X-4.2
Production
The LTC4054 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its ThinSOT package and low external...
Datasheet
LTC4054X-4.2 on Analog.com
LTC3308A
Recommended for New Designs
The LTC3308A is a very small, high efficiency, low noise, monolithic synchronous 4A step-down DC/DC converter operating from a 2.25V to 5.5V input supply...
Datasheet
LTC3308A on Analog.com
LTC1992
Production
The LTC1992 product family consists of five fully differential, low power amplifiers. The LTC1992 is an unconstrained fully differential amplifier. The...
Datasheet
LTC1992 on Analog.com
LT3571
Production
The LT3571 is a current mode step-up DC/DC converter designed to bias avalanche photodiodes (APDs) in optical receivers with an output voltage up to 75V...
Datasheet
LT3571 on Analog.com
LT3754
Recommended for New Designs
The LT3754 is a 16-channel LED driver with a step-up DC/DC controller capable of driving up to 45V of LEDs. Each channel contains an accurate current sink...
Datasheet
LT3754 on Analog.com
LT8337
Recommended for New Designs
The LT8337/LT8337-1 is a low IQ, synchronous step-up DC/DC converter. It features Silent Switcher architecture and optional spread spectrum frequency modulation...
Datasheet
LT8337 on Analog.com
LTC5593
Production
The LTC5593 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The...
Datasheet
LTC5593 on Analog.com
LT1580
Production
The LT1580 is a 7A low dropout regulator designed to power the new generation of microprocessors. The dropout voltage of this device is 100mV at light...
Datasheet
LT1580 on Analog.com
LTC2238
Production
The LTC2238/LTC2237/LTC2236 are 10-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2238 on Analog.com
LTC4300A-2
Production
The LTC4300A series hot swappable 2-wire bus buffers
allow I/O card insertion into a live backplane without
corruption of the data and clock busses. When...
Datasheet
LTC4300A-2 on Analog.com
LTC3736-2
Production
The LTC3736-2 is a 2-phase dual synchronous step-down switching regulator controller with tracking that drives external complementary power MOSFETs using...
Datasheet
LTC3736-2 on Analog.com
LT4351
Production
The LT4351 creates a near-ideal diode using external single or back-to-back N-channel MOSFETs. This ideal diode function permits low loss ORing of multiple...
Datasheet
LT4351 on Analog.com
LT6600-10
Production
The LT6600-10 combines a fully differential amplifier with a 4th order 10MHz lowpass filter approximating a Chebyshev frequency response. Most differential...
Datasheet
LT6600-10 on Analog.com
LT3840
Recommended for New Designs
The LT3840 is a high voltage synchronous step-down switching regulator controller capable of operating from a 2.5V to 60V supply.
The LT3840’s low quiescent...
Datasheet
LT3840 on Analog.com
LTM8065
Recommended for New Designs
The LTM8065 is a 40VIN, 3.5A peak, 2.5A continuous step-down µModule® (power module) regulator. Included in the package are the switching controller, power...
Datasheet
LTM8065 on Analog.com
LTC2222-11
Production
The LTC2222-11 is a 105Msps, sampling 11-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2222-11 is perfect...
Datasheet
LTC2222-11 on Analog.com
LTC5540
Production
The LTC5540 is part of a family of high dynamic range, high gain passive downconverting mixers covering the 600MHz to 4GHz frequency range. The LTC5540...
Datasheet
LTC5540 on Analog.com
LTC2632
Production
The LTC2632 is a family of dual 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift reference in an 8-lead TSOT-23 package...
Datasheet
LTC2632 on Analog.com
LT1012
Production
The LT1012 is an internally compensated universal precision operational amplifier which can be used in practically all precision applications. The LT1012...
Datasheet
LT1012 on Analog.com
LTC6228
Last Time Buy
The LTC6228/LTC6229 are single/dual very fast, low noise rail-to-rail output, unity gain stable op amps. They have a gain-bandwidth product of 890MHz and...
Datasheet
LTC6228 on Analog.com
LT6554
Last Time Buy
The LT6554 is a high-speed triple video buffer with an internally fixed gain of 1. The individual buffers are optimized for performance with a 1k load...
Datasheet
LT6554 on Analog.com
LT1102
Production
The LT1102 is the first fast FET input instrumentation amplifier offered in the low cost, space saving 8-pin packages. Fixed gains of 10 and 100 are provided...
Datasheet
LT1102 on Analog.com
LT1270
Production
The LT1270A/LT1270 are monolithic high power switching regulators. Identical to the popular LT1070, except for switching frequency (60kHz) and higher switch...
Datasheet
LT1270 on Analog.com
LT1681
Production
The LT1681 controller simplifies the design of high power synchronous dual transistor forward DC/DC converters. The part employs fixed frequency current...
Datasheet
LT1681 on Analog.com
LTC3209
Production
The LTC3209-1/LTC3209-2 are highly integrated multidisplay LED controllers. These parts contain a high efficiency, low noise charge pump to provide power...
Datasheet
LTC3209 on Analog.com
LTC4058-4.2
Production
The LTC4058 is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Its DFN package and low external component...
Datasheet
LTC4058-4.2 on Analog.com
LTM4627
Production
The LTM4627 is a complete 15A output high efficiency switch mode DC/DC power supply. Included in the package are the switching controller, power FETs,...
Datasheet
LTM4627 on Analog.com
LTC7067
Production
The LTC7067 drives two high-side N-Channel MOSFETs with supply voltages up to 140V. Both drivers can operate with a different ground reference, providing...
Datasheet
LTC7067 on Analog.com
LTC2323-14
Production
The LTC2323-14 is a low noise, high speed dual 14-bit + sign successive approximation register (SAR) ADC with differential inputs and wide input common...
Datasheet
LTC2323-14 on Analog.com
LTZ1000
Production
The LTZ1000 and LTZ1000A are ultra stable temperature controllable references. They are designed to provide 7V outputs with temperature drifts of 0.05ppm...
Datasheet
LTZ1000 on Analog.com
LTC6813-1
Production
The LTC6813-1 is a multicell battery stack monitor that measures up to 18 series connected battery cells with a total measurement error of less than 2...
Datasheet
LTC6813-1 on Analog.com
LTC2449
Production
The LTC2444/LTC2445/LTC2448/LTC2449 are 8-/16- channel (4-/8-differential) high speed 24-bit No Latency ?? ADCs. They use a proprietary delta-sigma architecture...
Datasheet
LTC2449 on Analog.com
LT3046
Recommended for New Designs
The LT3046 is a high-performance, low-dropout linear
regulator featuring Analog Devices, Inc. ultra-low noise
and ultra-high PSRR architecture for powering...
Datasheet
LT3046 on Analog.com
LT8582
Recommended for New Designs
The LT8582 is a dual independent channel PWM DC/DC converter with a power good pin and built-in fault protection to help guard against input overvoltage...
Datasheet
LT8582 on Analog.com
LTC2962
Recommended for New Designs
The LTC2962 series of configurable power supply monitors
can supervise systems with up to four supply voltages.
One of 16 preset or adjustable voltage...
Datasheet
LTC2962 on Analog.com
LTC3887
Recommended for New Designs
The LTC3887/LTC3887-1/LTC3887-2 are dual, PolyPhase DC/DC synchronous step-down switching regulator controllers with an I2C-based PMBus compliant serial...
Datasheet
LTC3887 on Analog.com
LTM8051
Recommended for New Designs
The LTM8051 is quad 40VIN, 1.2A step-down Silent Switcher μModule® regulator. The Silent Switcher architecture minimizes EMI while delivering high efficiency...
Datasheet
LTM8051 on Analog.com
LTC1154
Production
The LTC1154 single high-side gate driver allows using low cost N-channel FETs for high-side switching applications. An internal charge pump boosts the...
Datasheet
LTC1154 on Analog.com
LTC3875
Recommended for New Designs
The LTC3875 is a dual output current mode synchronous step-down DC/DC controller that drives all N-channel power MOSFET stages. It employs a unique architecture...
Datasheet
LTC3875 on Analog.com
LTC2324-16
Production
The LTC2324-16 is a low noise, high speed quad 16-bit successive approximation register (SAR) ADC with differential inputs and wide input common mode range...
Datasheet
LTC2324-16 on Analog.com
LTC2850
Production
The LTC2850, LTC2851 and LTC2852 are low power, 20Mbps RS485/RS422 transceivers operating on 3.3V supplies. The receiver has a one-eighth unit load supporting...
Datasheet
LTC2850 on Analog.com
LTC2242-12
Production
The LTC2242-12 is a 250Msps, sampling 12-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2242-12 is perfect...
Datasheet
LTC2242-12 on Analog.com
LTM4671
Recommended for New Designs
The LTM4671 is a quad DC/DC step-down µModule (micromodule) regulator offering dual 12A and dual 5A output. Included in the package are the switching...
Datasheet
LTM4671 on Analog.com
LTC1697
Production
The LTC1697 is designed to control a single 1W cold cathode fluorescent lamp (CCFL). An internal PWM dimming system maximizes efficiency and dimming range...
Datasheet
LTC1697 on Analog.com
LTC4556
Production
The LTC4556 provides all necessary power control, level translation and supervisory functions for a smart card or S.A.M. card interface. The part contains...
Datasheet
LTC4556 on Analog.com
LTC1857
Production
The LTC1857/LTC1858/LTC1859 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These SoftSpan ADCs can be software...
Datasheet
LTC1857 on Analog.com
LT6106
Recommended for New Designs
The LT6106 is a versatile high side current sense amplifier. Design flexibility is provided by the excellent device characteristics: 250µV maximum offset...
Datasheet
LT6106 on Analog.com
LT5503
Obsolete
The LT5503 is a front-end transmitter IC designed for low voltage operation. The IC contains a high frequency quadrature modulator with a variable gain...
Datasheet
LT5503 on Analog.com
LT1631
Production
The LT1630/LT1631 are dual/quad, rail-to-rail input and output op amps with a 30MHz gain-bandwidth product and a 10V/µs slew rate.
The LT1630/LT1631 have...
Datasheet
LT1631 on Analog.com
LTC2947-65
Recommended for New Designs
The LTC2947-65 is a high precision power and energy monitor with an internal sense resistor supporting up to ±65A*. Three internal No Latency ??™ ADCs...
Datasheet
LTC2947-65 on Analog.com
LTC2161
Production
The LTC2162/LTC2161/LTC2160 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for...
Datasheet
LTC2161 on Analog.com
LTC3614
Production
The LTC3614 is a low quiescent current monolithic synchronous buck regulator using a current mode, constant frequency architecture. The no-load DC supply...
Datasheet
LTC3614 on Analog.com
LTC2203
Production
The LTC2203/LTC2202 are 25Msps/10Msps, sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals with input frequencies...
Datasheet
LTC2203 on Analog.com
LT1241
Production
The LT1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry...
Datasheet
LT1241 on Analog.com
LTC3406-1.8
Production
The LTC3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in...
Datasheet
LTC3406-1.8 on Analog.com
LT1137A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1137A on Analog.com
LT1185
Production
The LT1185 is a 3A low dropout regulator with adjustable current limit and remote sense capability. It can be used as a positive output regulator with...
Datasheet
LT1185 on Analog.com
LTC6812-1
Production
The LTC6812-1 is a multicell battery stack monitor that measures up to 15 series connected battery cells with a total measurement error of less than 2...
Datasheet
LTC6812-1 on Analog.com
LTC7840
Recommended for New Designs
The LTC®7840 is a dual phase dual output, constant frequency current mode, nonsynchronous boost controller that drives N-channel power MOSFETs. The nonsynchronous...
Datasheet
LTC7840 on Analog.com
LTC6260
Last Time Buy
The LTC6258/LTC6259/LTC6260 are single/dual/quad operational amplifiers with low noise, low power, low supply voltage, and rail-to-rail inputs and outputs...
Datasheet
LTC6260 on Analog.com
LT1208
Production
The LT1208/LT1209 are dual and quad very high speed operational amplifiers with excellent DC performance. The LT1208/LT1209 feature reduced input offset...
Datasheet
LT1208 on Analog.com
LTC3900
Production
The LTC3900 is a secondary-side synchronous rectifier driver designed to be used in isolated forward converter power supplies. The chip drives N-channel...
Datasheet
LTC3900 on Analog.com
LT8642-1
Recommended for New Designs
The LT8642-1 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency...
Datasheet
LT8642-1 on Analog.com
LTC4419
Recommended for New Designs
The LTC4419 is a dual input monolithic PowerPath™ prioritizer with low operating current, that provides backup switchover for keeping critical circuitry...
Datasheet
LTC4419 on Analog.com
LTC2485
Production
The LTC2485 combines a 24-bit plus sign No Latency ?S™ analog-to-digital converter with patented Easy Drive technology and I2C digital interface. The patented...
Datasheet
LTC2485 on Analog.com
LTC2183
Production
The LTC2185/LTC2184/LTC2183 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2183 on Analog.com
LT3504
Production
The LT3504 consists of four 1A output current buck regulators. The LT3504 has a wide operating input range of 3.2V to 40V. An on-chip boost regulator allows...
Datasheet
LT3504 on Analog.com
LT83205
Recommended for New Designs
The LT83203/LT83205 synchronous step-down
regulator is uniquely designed to combine an ultra-low
noise reference with Silent Switcher architecture to
achieve...
Datasheet
LT83205 on Analog.com
LTC6431-15
Recommended for New Designs
The LTC6431-15 is a gain-block amplifier with excellent linearity at frequencies beyond 1000MHz and with low associated output noise.
The unique combination...
Datasheet
LTC6431-15 on Analog.com
LTC1410
Production
The LTC1410 is a 0.65µs, 1.25Msps, 12-bit sampling A/D converter that draws only 160mW from ±5V supplies. This easy-to-use device includes a high dynamic...
Datasheet
LTC1410 on Analog.com
LTC1098
Production
The LTC1096/LTC1096L/LTC1098/LTC1098L are micropower, 8-bit A/D converters that draw only 80µA of supply current when converting. They automatically power...
Datasheet
LTC1098 on Analog.com
LTC2255
Production
The LTC2255/LTC2254 are 14-bit 125Msps/105Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2255...
Datasheet
LTC2255 on Analog.com
LTC6420-20
Recommended for New Designs
The LTC6420-20 is a dual high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to...
Datasheet
LTC6420-20 on Analog.com
LTC2487
Production
The LTC2487 is a 4-channel (2 differential), 16-bit, No Latency ?S™ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling scheme...
Datasheet
LTC2487 on Analog.com
LTC2382-16
Production
The LTC2382-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2382-16 has...
Datasheet
LTC2382-16 on Analog.com
LTC1706-63
Production
The LTC1706-63 is a precision, digitally programmed, resistive ladder which adjusts the output of any 0.6V referenced regulator. Depending on the state...
Datasheet
LTC1706-63 on Analog.com
LT3932
Production
The LT3932, featuring the Silent Switcher® architecture
to minimize EMI/EMC emissions, utilizes fixed-frequency,
peak current control and provides PWM...
Datasheet
LT3932 on Analog.com
LTC4075HVX
Production
The LTC4075HVX is a standalone linear charger that is capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs. The...
Datasheet
LTC4075HVX on Analog.com
LT8640S-2
Recommended for New Designs
The LT8640S-2/LT8643S-2 synchronous step-down regulator features Silent Switcher architecture designed to minimize EMI emissions while delivering high...
Datasheet
LT8640S-2 on Analog.com
LTC3541-2
Production
The LTC3541-2 combines a synchronous buck DC/DC converter with a very low dropout linear regulator (VLDO™regulator) and internal feedback resistor networks...
Datasheet
LTC3541-2 on Analog.com
LTC4213
Production
The LTC4213 is an Electronic Circuit Breaker. An overcurrent circuit breaker senses the voltage across the drain and source terminals of an external N...
Datasheet
LTC4213 on Analog.com
LT6550
Production
The LT6550/LT6551 are 3.3V triple and quad high speed video amplifiers. These voltage feedback amplifiers drive double terminated 50O or 75O cables and...
Datasheet
LT6550 on Analog.com
LTC3220
Production
The LTC3220/LTC3220-1 are highly integrated multi-display LED drivers. These parts contain a high efficiency, low noise charge pump to provide power to...
Datasheet
LTC3220 on Analog.com
LTC1275
Production
The LTC1273/LTC1275/LTC1276 are 300ksps, sampling 12-bit A/D converters that draw only 75mW from single 5V or ±5V supplies. These easy-to-use devices come...
Datasheet
LTC1275 on Analog.com
LTC2856-1
Production
The LTC2856-1, LTC2856-2, LTC2857-1, LTC2857-2, LTC2858-1 and LTC2858-2 are low power, RS485/RS422 transceivers operating on 5V supplies at maximum data...
Datasheet
LTC2856-1 on Analog.com
LT1139A
Production
The LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the...
Datasheet
LT1139A on Analog.com
LT3751
Production
The LT3751 is a high input voltage capable flyback controller designed to rapidly charge a large capacitor to a user-adjustable high target voltage set...
Datasheet
LT3751 on Analog.com
LTC2614
Production
The LTC2604/LTC2614/LTC2624 are quad 16-,14- and 12-bit 2.5V to 5.5V rail-to-rail voltage output DACs in 16-lead narrow SSOP packages. These parts have...
Datasheet
LTC2614 on Analog.com
LTC4412HV
Recommended for New Designs
The LTC4412HV controls an external P-channel MOSFET to create a near ideal diode function for power switchover or load sharing. This permits highly efficient...
Datasheet
LTC4412HV on Analog.com
LT3041
Recommended for New Designs
The LT3041 is a high-performance, low-dropout linear regulator featuring Analog Devices, Inc., ultra-low noise and ultra-high power supply rejection ratio...
Datasheet
LT3041 on Analog.com
LT1424-5
Production
The LT1424-5 is a monolithic high power switching regulator specifically designed for the isolated flyback topology. No “third winding” or optoisolator...
Datasheet
LT1424-5 on Analog.com
LTC4303
Production
The LTC4303 hot swappable 2-wire Bus Buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection...
Datasheet
LTC4303 on Analog.com
LTC1066-1
Production
The LTC1066-1 is an 8th order elliptic lowpass filter which simultaneously provides clock-tunability and DC accuracy. The unique and proprietary architecture...
Datasheet
LTC1066-1 on Analog.com
LTC1067
Production
The LTC1067/LTC1067-50 consist of two identical rail-to-rail, high accuracy and very wide dynamic range 2nd order switched-capacitor building blocks. Each...
Datasheet
LTC1067 on Analog.com
LTM4615
Recommended for New Designs
The LTM4615 is a complete 4A dual output switching mode DC/DC power supply plus an additional 1.5A VLDO (very low dropout) linear regulator. Included in...
Datasheet
LTM4615 on Analog.com
LTM4607
Recommended for New Designs
The LTM4607 is a high efficiency switching mode buck-boost power supply. Included in the package are the switching controller, power FETs, and support...
Datasheet
LTM4607 on Analog.com
LT3965
Production
The LT3965/LT3965-1 is an LED bypass switching device for dimming individual LEDs in a string using a common current source. It features eight individually...
Datasheet
LT3965 on Analog.com
LTC5556
Production
The LTC5556 dual programmable gain downconverting
mixer is ideal for diversity and MIMO receivers that
require precise gain setting. Each channel incorporates...
Datasheet
LTC5556 on Analog.com
LTC2904
Production
The LTC2904/LTC2905 are dual supply monitors intended for systems with two supply voltages. The dual supply monitors have a common reset output with delay...
Datasheet
LTC2904 on Analog.com
LTC2151-14
Production
The LTC2152-14/LTC2151-14/LTC2150-14 are 250Msps/210Msps/170Msps 14-bit A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2151-14 on Analog.com
LTC3819
Production
The LTC3819 is a 2-phase, VID programmable, synchronous step-down switching regulator controller that drives two N-channel external power MOSFET stages...
Datasheet
LTC3819 on Analog.com
LTC3862-2
Recommended for New Designs
The LTC3862-2 is a two-phase constant frequency, current mode boost and SEPIC controller that drives N-channel power MOSFETs. Two-phase operation reduces...
Datasheet
LTC3862-2 on Analog.com
LT1178
Production
The LT1178 is a micropower dual op amp in the standard 8-pin configuration; the LT1179 is a micropower quad op amp offered in the standard 14-pin packages...
Datasheet
LT1178 on Analog.com
LTC1264-7
Production
The LTC1264-7 is a clock-tunable monolithic 8th order lowpass filter with linear passband phase and flat group delay. The amplitude response approximates...
Datasheet
LTC1264-7 on Analog.com
LTC4420
Recommended for New Designs
The LTC4420 is a dual input monolithic PowerPath™ prioritizer, with low operating current, that provides backup switchover for keeping critical circuitry...
Datasheet
LTC4420 on Analog.com
LTM4619
Recommended for New Designs
The LTM4619 is a complete dual 4A or single 8A stepdown DC/DC µModule® (power module) regulator. Included in the package are the switching controller,...
Datasheet
LTM4619 on Analog.com
LTC2296
Production
The LTC2298/LTC2297/LTC2296 are 14-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range...
Datasheet
LTC2296 on Analog.com
LTC2631
Production
The LTC2631 is a family of 12-, 10-, and 8-bit voltage-output DACs with an integrated, high accuracy, low-drift reference in an 8-lead TSOT-23 package...
Datasheet
LTC2631 on Analog.com
LTC3626
Recommended for New Designs
The LTC3626 is a high efficiency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of...
Datasheet
LTC3626 on Analog.com
LTC3400-1
Recommended for New Designs
The LTC3400-1 is a synchronous, fixed frequency, stepup DC/DC converter delivering high efficiency in a 6-lead ThinSOTâ„¢ package. Capable of supplying...
Datasheet
LTC3400-1 on Analog.com
LTM2894
Production
The LTM2894 is a complete galvanically-isolated USB 2.0 compatible μModule® (micromodule) transceiver.
The LTM2894 is ideal for isolation in host, hub...
LTM2894 on Analog.com
LTC2620
Production
The LTC2600/LTC2610/LTC2620 are octal 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP and 20-lead 4mm × 5mm QFN...
Datasheet
LTC2620 on Analog.com
LTC6101
Production
The LTC6101/LTC6101HV are versatile, high voltage, high side current sense amplifiers. Design flexibility is provided by the excellent device characteristics;...
Datasheet
LTC6101 on Analog.com
LTC3617
Recommended for New Designs
The LTC3617 is a high efficiency monolithic synchronous buck regulator utilizing a current mode, constant frequency architecture. It operates from an input...
Datasheet
LTC3617 on Analog.com
LTC6081
Recommended for New Designs
The LTC6081/LTC6082 are dual/quad low offset, low drift, low noise CMOS operational amplifiers with rail-to-rail input/output swing.
The 70µV maximum offset...
Datasheet
LTC6081 on Analog.com
LTC3545
Production
The LTC3545/LTC3545-1 are triple, high efficiency, monolithic synchronous buck regulators using a constant frequency, current mode architecture. The regulators...
Datasheet
LTC3545 on Analog.com
LTM9013
Not Recommended for New Designs
The LTM9013 is a 300MHz wideband, low IF receiver. Utilizing an integrated system in a package (SiP) technology, it is a µModule® (micromodule) receiver...
Datasheet
LTM9013 on Analog.com
LTC2152-12
Production
The LTC2152-12/LTC2151-12/LTC2150-12 are a family of 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic...
Datasheet
LTC2152-12 on Analog.com
LT8603
Production
The LT8603 is a highly flexible, quad output regulator combining two high input voltage capable monolithic step-down switching regulators, one low input...
Datasheet
LT8603 on Analog.com
LT3078
Recommended for New Designs
The LT3078 is a low voltage, ultra-low noise, high power-supply rejection ratio (PSRR), and ultra-fast transient response linear regulator. The device...
Datasheet
LT3078 on Analog.com
LTC1514
Production
The LTC1514-3.3/LTC1514-5 are micropower switched capacitor DC/DC converters that produce a regulated output voltage by either stepping up or stepping...
Datasheet
LTC1514 on Analog.com
LTP5902-IPM
Production
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes.The LTP5902-IPM...
Datasheet
LTP5902-IPM on Analog.com
LTC3311S
Recommended for New Designs
The LTC3311S is a very small, low noise, monolithic step-down DC/DC converter capable of providing up to 12.5A of output current from a 2.25V to 5.5V input...
Datasheet
LTC3311S on Analog.com
LTC3725
Not Recommended for New Designs
The LTC3725 is a controller for a single-switch forward converter and includes an on-chip gate driver.
For secondary-side control, combine the LTC3725...
Datasheet
LTC3725 on Analog.com
LTC1701
Production
The LTC1701/LTC1701B are the industry's first SOT-23 step-down, current mode, DC/DC converters. Intended for low to medium power applications, they operate...
Datasheet
LTC1701 on Analog.com
LTC3891
Recommended for New Designs
The LTC3891 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage. A constant...
Datasheet
LTC3891 on Analog.com
LTC1046
Production
The LTC1046 is a 50mA monolithic CMOS switched capacitor voltage converter. It plugs in for the ICL7660/LTC1044 in 5V applications where more output current...
Datasheet
LTC1046 on Analog.com
LTC4096
Production
The LTC4096/LTC4096X are standalone linear chargers that are capable of charging a single-cell Li-Ion or Li-Polymer battery from both wall adapter and...
Datasheet
LTC4096 on Analog.com
LTC3569
Production
The LTC3569 contains three monolithic, synchronous step-down DC/DC converters. Intended for medium power applications, it operates over a 2.5V to 5.5V...
Datasheet
LTC3569 on Analog.com
LTC1418
Production
The LTC1418 is a low power, 200ksps, 14-bit A/D converter. Data output is selectable for 14-bit parallel or serial format. This versatile device can operate...
Datasheet
LTC1418 on Analog.com
LTM4668A
Recommended for New Designs
The LTM4668A is a quad DC/DC step-down µModule (micromodule) regulator with 1.2A DC current per output. Outputs can be paralleled in an array for up to...
Datasheet
LTM4668A on Analog.com
LTC2355-14
Production
The LTC2355-12/LTC2355-14 are 12-bit/14-bit, 3.5Msps serial ADCs with differential inputs. The devices draw only 5.5mA from a single 3.3V supply and come...
Datasheet
LTC2355-14 on Analog.com
LTC4078
Production
The LTC4078/LTC4078X are standalone linear chargers that are capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs...
Datasheet
LTC4078 on Analog.com
LTC1775
Production
The LTC1775 is a synchronous step-down switching regulator controller that drives external N-channel power MOSFETs using few external components. Current...
Datasheet
LTC1775 on Analog.com
LTC3560
Production
The LTC3560 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation...
Datasheet
LTC3560 on Analog.com
LTC1643
Obsolete
Obsolete - Data Sheet For Reference Only
The LTC1643 is a Hot Swapâ„¢ controller that allows a board to be safely inserted and removed from a live PCI...
LTC1643 on Analog.com
LT3756
Production
The LT3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low...
Datasheet
LT3756 on Analog.com
LTC2975
Recommended for New Designs
The LTC2975 is a 4-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault logs...
Datasheet
LTC2975 on Analog.com
LTC4290
Recommended for New Designs
The LTC4290/LTC4271 chipset is an 8-port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 1 and Type 2 (high power) compliant...
LTC4290 on Analog.com
LTC4231
Recommended for New Designs
The LTC4231 is a micropower Hot Swap controller that allows safe circuit board insertion and removal from a live power supply. An internal high side switch...
Datasheet
LTC4231 on Analog.com
LTC1340
Obsolete
OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LTC1340 is a varactor diode driver designed to generate...
Datasheet
LTC1340 on Analog.com
LTC1643A
Production
The LTC1643A is a Hot Swap™ controller that allows a board to be safely inserted and removed from a live PCI-Bus slot. Two external N-channel transistors...
Datasheet
LTC1643A on Analog.com
LT119A
Obsolete
The LT119A is an improved version of the LM119 dual comparator. It features lower input offset voltage and offset current, higher voltage gain, guaranteed...
Datasheet
LT119A on Analog.com
LTC1731-4.1
Production
The LTC1731 is a complete constant-current/constant-voltage linear charger controller for single cell lithium-ion batteries. Nickel-cadmium (NiCd) and...
Datasheet
LTC1731-4.1 on Analog.com
LT1576
Production
The LT1576 is a 200kHz monolithic buck mode switching regulator. A 1.5A switch is included on the die along with all the necessary oscillator, control...
Datasheet
LT1576 on Analog.com
LTM4647
Recommended for New Designs
The LTM4647 is a complete 30A output switching mode step-down DC/DC µModule® (power module) regulator. Included in the package are the switching controller...
Datasheet
LTM4647 on Analog.com
LTC4279
Recommended for New Designs
The LTC4279 is an autonomous single port power sourcing equipment (PSE) controller designed for use in IEEE 802.3at Type 1, Type 2 and LTPoE++ compliant...
Datasheet
LTC4279 on Analog.com
LT3002
Recommended for New Designs
The LT3002 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform...
Datasheet
LT3002 on Analog.com
LTM3360B
Pre release
The LTM®3360B is a high-current, high-density, lowvoltage
buck power μModule® (micromodule) regulator
optimized for high-output current applications...
Datasheet
LTM3360B on Analog.com
LTC2410
Production
The LTC2410 is a 2.7V to 5.5V micropower 24-bit differential ?S analog to digital converter with an integrated oscillator, 2ppm INL and 0.16ppm RMS noise...
Datasheet
LTC2410 on Analog.com
LTC1858
Production
The LTC1857/LTC1858/LTC1859 are 8-channel, low power, 12-/14-/16-bit, 100ksps, analog-to-digital converters (ADCs). These SoftSpan™ ADCs can be software...
Datasheet
LTC1858 on Analog.com
LT6107
Recommended for New Designs
The LT6107 is a versatile high side current sense amplifier designed for operation over a wide temperature range. Design ?exibility is provided by the...
Datasheet
LT6107 on Analog.com
LTC3246
Recommended for New Designs
The LTC3246 is a switched capacitor buck-boost DC/DC converter with integrated watchdog timer. The device produces a regulated output (3.3V, 5V or adjustable...
Datasheet
LTC3246 on Analog.com
LT8686S
Recommended for New Designs
The LT8686S is a highly flexible, four-channel, current mode, monolithic regulator able to power a wide range of automotive and industrial applications...
Datasheet
LT8686S on Analog.com
LTC6603
Recommended for New Designs
The LTC6603 is a dual, matched, programmable lowpass filter for communications receivers and transmitters. The selectivity of the LTC6603, combined with...
Datasheet
LTC6603 on Analog.com
LTC2305
Production
The LTC2301/LTC2305 are low noise, low power, 1-/2-channel, 12-bit successive approximation ADCs with an I2C compatible serial interface. These ADCs include...
Datasheet
LTC2305 on Analog.com
LTK001
Not Recommended for New Designs
The LTK001 is a thermocouple amplifier supplied with a matched cold junction compensator. By separating the amplifier and compensator functions, the problem...
Datasheet
LTK001 on Analog.com
LT3003
Production
The LT3003 drives three separate strings of LEDs up to 350mA/channel with 3% accurate current matching, resulting in uniform LED brightness and intensity...
Datasheet
LT3003 on Analog.com
LT3477
Production
The LT3477 is a current mode, 3A DC/DC step-up converter with dual rail-to-rail current sense amplifiers and an internal 3A, 42V switch. It combines a...
Datasheet
LT3477 on Analog.com
LTC3616
Production
The LTC3616 is a low quiescent current monolithic synchronous buck regulator using a current mode, constant frequency architecture. The no-load DC supply...
Datasheet
LTC3616 on Analog.com
LTC4253B
Recommended for New Designs
The LTC4253B negative voltage Hot Swapâ„¢ controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled...
Datasheet
LTC4253B on Analog.com
LT5525
Production
The LT5525 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, high performance radios and...
Datasheet
LT5525 on Analog.com
LTC2239
Production
The LTC2239 is a 10-bit 80Msps, low power 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2239 is perfect for...
Datasheet
LTC2239 on Analog.com
LT1961
Production
The LT1961 is a 1.25MHz monolithic boost switching regulator. A high efficiency 1.5A, 0.2O switch is included on the die together with all the control...
Datasheet
LT1961 on Analog.com
LTC1595
Production
The LTC1595/LTC1596/LTC1596-1 are serial input, 16-bit multiplying current output DACs. The LTC1595 is pin and hardware compatible with the 12-bit DAC8043...
Datasheet
LTC1595 on Analog.com
LT8336
Recommended for New Designs
The LT8336 is a low IQ, synchronous step-up DC/DC converter. It features Silent Switcher architecture and optional spread spectrum frequency modulation...
Datasheet
LT8336 on Analog.com
LT1816
Production
The LT1815/LT1816/LT1817 are low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1815/LT1816/LT1817...
Datasheet
LT1816 on Analog.com
LT1880
Production
The LT1880 op amp brings high accuracy input performance and rail-to-rail output swing to the SOT-23 package. Input offset voltage is trimmed to less than...
Datasheet
LT1880 on Analog.com
LT1767
Production
The LT1767 is a 1.25MHz monolithic buck switching regulator. A high efficiency 1.5A, 0.22O switch is included on the die together with all the control...
Datasheet
LT1767 on Analog.com
LT5516
Production
The LT5516 is an 800MHz to 1.5GHz direct conversion quadrature demodulator optimized for high linearity receiver applications. It is suitable for communications...
Datasheet
LT5516 on Analog.com
LTC3600
Recommended for New Designs
The LTC3600 is a high efficiency, monolithic synchronous buck regulator whose output is programmed with just one external resistor. The accurate internally...
Datasheet
LTC3600 on Analog.com
LTC4358
Recommended for New Designs
The LTC4358 is a 5A ideal diode that uses an internal 20mO N-channel MOSFET to replace a Schottky diode when used in diode-OR and high current diode applications...
Datasheet
LTC4358 on Analog.com
LT6016
Recommended for New Designs
The LT6015/LT6016/LT6017 are single/dual/quad rail-to-rail input operational amplifiers with input offset voltage trimmed to less than 50µV. These amplifiers...
Datasheet
LT6016 on Analog.com
LTC4284
Recommended for New Designs
The LTC4284 negative voltage hot swap controller drives external N-channel MOSFETs to allow a board to be safely inserted and removed from a live backplane...
Datasheet
LTC4284 on Analog.com
LTC6431-20
Recommended for New Designs
The LTC6431-20 is a gain block amplifier exhibiting excellent linearity at frequencies beyond 1000MHz and with low associated output noise.
The unique...
Datasheet
LTC6431-20 on Analog.com
LT3015
Recommended for New Designs
The LT3015 series are low noise, low dropout, negative linear regulators with fast transient response. The devices supply up to 1.5A of output current...
Datasheet
LT3015 on Analog.com
LTC3245
Recommended for New Designs
The LTC3245 is a switched capacitor buck-boost DC/DC converter that produces a regulated output (3.3V, 5V or adjustable) from a 2.7V to 38V input. The...
Datasheet
LTC3245 on Analog.com
LTC2122
Production
The LTC2122 is a 2-channel simultaneous sampling 170Msps 14-bit A/D converter with serial JESD204B outputs. It is designed for digitizing high frequency...
Datasheet
LTC2122 on Analog.com
LT3505
Production
The LT3505 is a current mode PWM step-down DC/DC converter with an internal 1.4A power switch. The wide operating input range of 3.6V to 36V (40V maximum...
Datasheet
LT3505 on Analog.com
LT1124
Production
The LT1124 dual and LT1125 quad are high performance op amps that offer higher gain, slew rate and bandwidth than the industry standard OP-27 and competing...
Datasheet
LT1124 on Analog.com
LTC6401-14
Last Time Buy
The LTC6401-14 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive...
LTC6401-14 on Analog.com
LT83203
Recommended for New Designs
The LT83203/LT83205 synchronous step-down
regulator is uniquely designed to combine an ultra-low
noise reference with Silent Switcher architecture to
achieve...
Datasheet
LT83203 on Analog.com
LTC3586-2
Production
The LTC3586-2/LTC3586-3 are highly integrated power management and battery charger ICs for Li-Ion/Polymer battery applications. They include a high efficiency...
Datasheet
LTC3586-2 on Analog.com
LT3012B
Recommended for New Designs
The LT3012B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage...
Datasheet
LT3012B on Analog.com
LT311
Obsolete
OBSOLETE Product: Datasheet For Information Purposes Only. Contact Analog Devices for Potential Replacement.
The LT111A is an improved version of the LM111...
Datasheet
LT311 on Analog.com
LTM8046
Recommended for New Designs
The LTM8046 is an isolated flyback DC/DC µModule® (power module) converter. The LTM8046 has an isolation rating of 2kVAC. Included in the package are the...
Datasheet
LTM8046 on Analog.com
LTC486
Production
The LTC486 is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common-mode...
Datasheet
LTC486 on Analog.com
LTC3115-2
Recommended for New Designs
The LTC3115-2 is a high voltage monolithic synchronous buck-boost DC/DC converter optimized for applications subject to fast (<1ms) input voltage transients...
Datasheet
LTC3115-2 on Analog.com
LTC6605-7
Last Time Buy
The LTC6605-7 contains two independent, fully differential amplifiers configured as matched 2nd order lowpass filters. The f–3dB of the filters is adjustable...
LTC6605-7 on Analog.com
LTP8813
Recommended for New Designs
The LTP8813 is a 110A continuous/140A peak step-down
power μModule® (micromodule) regulator that provides
microprocessor core voltage from a 48V or 54V...
Datasheet
LTP8813 on Analog.com
LTM8056
Recommended for New Designs
The LTM8056 is a 58VIN, buck-boost Power Module® (power module) regulator. Included in the package are the switching controller, power switches, inductor...
Datasheet
LTM8056 on Analog.com
LT6235
Production
The LT6233/LT6234/LT6235 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.9nV/vHz noise voltage and draw only...
Datasheet
LT6235 on Analog.com
LTC7543
Production
The LTC7543/LTC8143 are serial-input 12-bit multiplying digital-to-analog converters (DACs). They are superior pin compatible replacements for the AD7543...
Datasheet
LTC7543 on Analog.com
LTC1414
Production
The LTC1414 is a 14-bit, 2.2Msps, sampling A/D converter which draws only 175mW from ±5V supplies. This high performance ADC includes a high dynamic range...
Datasheet
LTC1414 on Analog.com
LTC6401-26
Last Time Buy
The LTC6401-26 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive...
LTC6401-26 on Analog.com
LTC1441
Production
The LTC1441 is an ultralow power dual comparator, featuring less than 5.7µA supply current over temperature. The TTL/CMOS outputs both sink and source...
Datasheet
LTC1441 on Analog.com
LT6220
Production
The LT6220/LT6221/LT6222 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance...
Datasheet
LT6220 on Analog.com
LTC3862-1
Production
The LTC3862-1 is a two phase constant frequency, current mode boost and SEPIC controller that drives N-channel power MOSFETs. Two phase operation reduces...
Datasheet
LTC3862-1 on Analog.com
LTM4612
Recommended for New Designs
The LTM4612 is a EN55022 Class B certified high voltage input and output, 5A switching mode DC/DC power supply. Included in the package are the switching...
Datasheet
LTM4612 on Analog.com
LT1080
Production
The LT1080/LT1081 are the only dual RS232 driver/receiver with charge pump to guarantee absolutely no latchup. These interface optimized devices provide...
Datasheet
LT1080 on Analog.com
LTC1699
Production
The LTC1699-80, LTC1699-81 and LTC1699-82 are precision (±0.35% max), digitally programmed resistor dividers that comply with Intel 5-bit mobile (LTC1699...
Datasheet
LTC1699 on Analog.com
LT1111
Production
The LT1111 is a versatile micropower DC/DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. Supply...
Datasheet
LT1111 on Analog.com
LTC1625
Production
The LTC1625 is a synchronous step-down switching regulator controller that drives external N-Channel power MOSFETs using few external components. Current...
Datasheet
LTC1625 on Analog.com
LTC1779
Production
The LTC1779 is a constant frequency current mode step-down DC/DC converter in a 6-lead ThinSOT package. The part operates with a 2.5V to 9.8V input and...
Datasheet
LTC1779 on Analog.com
LTC6910
Production
The LTC6910 family are low noise digitally programmable gain amplifiers (PGAs) that are easy to use and occupy very little PC board space. The inverting...
Datasheet
LTC6910 on Analog.com
LTC1069-6
Production
The LTC1069-6 is a monolithic low power, 8th order lowpass filter optimized for single 3V or single 5V supply operation. The LTC1069-6 typically consumes...
Datasheet
LTC1069-6 on Analog.com
LTC1706-85
Production
The LTC1706-85 is a precision, digitally programmed resistive ladder which adjusts the output of any 0.8V-referenced regulator. Depending on the state...
Datasheet
LTC1706-85 on Analog.com
LTM9001-A_-B
Production
The LTM9001 is an integrated system in a package (SiP) that includes a high-speed 16-bit A/D converter, matching network, anti-aliasing filter and a low...
Datasheet
LTM9001-A_-B on Analog.com
LTC3784
Recommended for New Designs
The LTC3784 is a high performance PolyPhase® single output synchronous boost converter controller that drives two N-channel power MOSFET stages out-of...
Datasheet
LTC3784 on Analog.com
LTC8143
Production
The LTC7543/LTC8143 are serial-input 12-bit multiplying digital-to-analog converters (DACs). They are superior pin compatible replacements for the AD7543...
Datasheet
LTC8143 on Analog.com
LTC7063
Recommended for New Designs
The LTC7063 drives two N-Channel MOSFETs in a half-bridge configuration with supply voltages up to 140V. Both high-side and low-side drivers can drive...
Datasheet
LTC7063 on Analog.com
LT1184
Production
The LT1182/LT1183 are dual current mode switching regulators that provide the control function for Cold Cathode Fluorescent Lighting (CCFL) and Liquid...
Datasheet
LT1184 on Analog.com
LT3484
Production
The LT3484 family of photoflash capacitor charger ICs is designed for use in digital camera and mobile phone applications where space is at a premium....
Datasheet
LT3484 on Analog.com
LTC1255
Production
The LTC1255 dual high-side driver allows using low cost N-channel FETs for high-side industrial and automotive switching applications. An internal charge...
Datasheet
LTC1255 on Analog.com
LTC7652
Obsolete
The LTC1052 and LTC7652 are low noise zero-drift op amps manufactured using an enhanced LTCMOS™ silicon gate process. Chopper-stabilization constantly...
Datasheet
LTC7652 on Analog.com
LTC4090-3
Recommended for New Designs
The LTC4090-3 is a USB power manager plus high voltage Li-Ion/Polymer battery charger. The device controls the total current used by the USB peripheral...
Datasheet
LTC4090-3 on Analog.com
LTC3035
Production
The LTC3035 is a micropower, VLDO™ (very low dropout) linear regulator which operates from input voltages as low as 1.7V. The device is capable of supplying...
Datasheet
LTC3035 on Analog.com
LT1221
Production
The LT1221 is a very high speed operational amplifier with superior DC performance. The LT1221 is stable in a noise gain of 4 or greater. It features reduced...
Datasheet
LT1221 on Analog.com
LT3439
Production
The LT3439 is a push-pull DC/DC transformer driver that reduces conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are achieved...
Datasheet
LT3439 on Analog.com
LT1614
Production
The LT1614 is a fixed frequency, inverting mode switching regulator that operates from an input voltage as low as 1V. Utilizing a low noise topology, the...
Datasheet
LT1614 on Analog.com
LT6660
Production
The LT6660 is a family of micropower series references that combine high accuracy and low drift with low power dissipation and extremely small package...
Datasheet
LT6660 on Analog.com
LT1180A
Production
The LT1180A/LT1181A are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits...
Datasheet
LT1180A on Analog.com
LTC2283
Production
The LTC2283 is a 12-bit 125Msps, low power dual 3V A/D converter designed for digitizing high frequency, wide dynamic range signals. The LTC2283 is perfect...
Datasheet
LTC2283 on Analog.com
LTC2615
Production
The LTC2605/LTC2615/LTC2625 are octal 16-, 14- and 12-bit, 2.7V to 5.5V rail-to-rail voltage-output DACs in 16-lead narrow SSOP packages. They have built...
Datasheet
LTC2615 on Analog.com
LT1469-2
Recommended for New Designs
The LT1469-2 is a dual, precision high speed operational amplifier with 16-bit accuracy, decompensated to be stable in a gain of 2 or greater. The combination...
Datasheet
LT1469-2 on Analog.com
LTC6079
Production
The LTC6078/LTC6079 are dual/quad, low offset, low noise operational amplifiers with low power consumption and rail-to-rail input/output swing.
Input offset...
Datasheet
LTC6079 on Analog.com
LTC2636
Production
The LTC2636 is a family of octal 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift 10ppm/°C reference in 14-lead DFN...
Datasheet
LTC2636 on Analog.com
LTC2980-24
Recommended for New Designs
The LTC2980-24 is a 24-channel Power System Manager used to sequence, trim (servo), margin, supervise, manage faults, provide telemetry and create fault...
Datasheet
LTC2980-24 on Analog.com
LTC2237
Production
The LTC2238/LTC2237/LTC2236 are 10-bit 65Msps/40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals...
Datasheet
LTC2237 on Analog.com
LT1310
Production
The LT1310 boost DC/DC converter combines a 1.5A current mode PWM switcher with an integrated phase-locked loop, allowing the user to set the switching...
Datasheet
LT1310 on Analog.com
LTC2662
Recommended for New Designs
The LTC2662 is a family of five-channel, 16-/12-bit current-source digital-to-analog converters, providing five high-compliance current source outputs...
Datasheet
LTC2662 on Analog.com
LT1213
Production
The LT1213 is a dual, single supply precision op amp with a 28MHz gain-bandwidth product and a 12V/µs slew rate. The LT1214 is a quad version of the same...
Datasheet
LT1213 on Analog.com
LT1950
Production
The LT1950 is a wide input range, forward, boost, flyback and SEPIC controller that drives an N-channel power MOSFET with few external components required...
Datasheet
LT1950 on Analog.com
LTC3859AL
Production
The LTC3859AL is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET...
Datasheet
LTC3859AL on Analog.com
LT1013
Production
The LT1014 is the first precision quad operational amplifier which directly upgrades designs in the industry standard 14-pin DIP LM324/LM348/OP-11/4156...
Datasheet
LT1013 on Analog.com
LT8604
Recommended for New Designs
The LT8604/LT8604C is a compact, high speed synchronous monolithic step-down switching regulator that delivers up to 120mA to the output with high efficiency...
Datasheet
LT8604 on Analog.com
LTM4636-1
Recommended for New Designs
The LTM4636-1 is a 40A step-down μModule® (power module) switching regulator with stacked inductor as a heat sink for heat dissipation and cooler operation...
Datasheet
LTM4636-1 on Analog.com
LTC3890-1
Recommended for New Designs
The LTC3890-1 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant...
Datasheet
LTC3890-1 on Analog.com
LT1183
Production
The LT1182/LT1183 are dual current mode switching regulators that provide the control function for Cold Cathode Fluorescent Lighting (CCFL) and Liquid...
Datasheet
LT1183 on Analog.com
LTC1703
Production
The LTC1703 is a dual switching regulator controller optimized for high efficiency with low input voltages. It includes two complete, on-chip, independent...
Datasheet
LTC1703 on Analog.com
LTC4252-1
Recommended for New Designs
The LTC4252 negative voltage Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled...
Datasheet
LTC4252-1 on Analog.com
LT3952A
Recommended for New Designs
The LT3952A is a current mode step-up DC/DC converter with an internal, 60V, 80mΩ DMOS power switch. The LT3952A is specifically designed to drive high...
Datasheet
LT3952A on Analog.com
LTC3888-2
Pre release
The LTC3888/LTC3888-1/LTC3888-2 is a PMBus-compliant dual loop DC/DC synchronous step-down switching regulator controller with eight expandable phases...
Datasheet
LTC3888-2 on Analog.com
LTM4656
Recommended for New Designs
The LTM4656 is a complete high efficiency boost μModule® (power module) regulator with the switching controller, power FETs, inductor, and all supporting...
Datasheet
LTM4656 on Analog.com
LTC2656
Production
The LTC2656 is a family of octal 16-/12-bit rail-to-rail DACs with a precision integrated reference. The DACs have built-in high performance, rail-to-rail...
Datasheet
LTC2656 on Analog.com
Discover how DPSM can reduce development time; speed up troubleshooting/diagnostics by allowing designers to configure and manage ICs from a digital interface.
