• State Verified Answer
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1091 views
  • Users 0 members are here
Options
Related

AD589 hand soldering condition

Mochi
on Aug 6, 2018

Hello,

 

Are there any documents or comments/advices about hand soldering condition of AD589SH(TO-51)?

I received this question from my customer.

 

Best regards,

Parents
  • 0
    •  Analog Employees 
    on Aug 10, 2018 2:43 AM

    Hi Moshi,

    If the application is currently under production flow, ADI does not recommend using hand solder. Please suggest to your customer to follow JEDEC J-STD-020 standard lead-free reflow profile.

    If the application is not under production flow and the customer intends to use hand soldering, here are some of my suggestions:

    • - Use lead-free solder.
    • - Please keep duration of solder contact with part pin as minimum as possible.

    Regards,

    Anshul

     

Reply
  • 0
    •  Analog Employees 
    on Aug 10, 2018 2:43 AM

    Hi Moshi,

    If the application is currently under production flow, ADI does not recommend using hand solder. Please suggest to your customer to follow JEDEC J-STD-020 standard lead-free reflow profile.

    If the application is not under production flow and the customer intends to use hand soldering, here are some of my suggestions:

    • - Use lead-free solder.
    • - Please keep duration of solder contact with part pin as minimum as possible.

    Regards,

    Anshul

     

Children
No Data