Search FAQs on the left to see if your question has been answered. Click on the dropdown to view all of the documents associated with the product. If you can't find your question, click on Ask a Question

ADV7614 Design Support Files

Attached and linked are several files supporting the development of systems using the ADV7614.

You can download zipped file collections.

We recomment that, if you download and use these documents, you subscribe to EMail notifications for either the entire forum or at least this FAQ by clicking on the menu to the right.  In this way, you will be automatically notified if there are any comments or changes to this FAQ or attached documents.  If the menu choice is "Stop email notifications," then you are already subscribed.

File Content
ADV7614 Product Page Link to Product Information Web Page
ADV7614 Datasheet Link to Product Shortform Datasheet
ADV7614_RecommendedSettings_Rev1.4.pdf Register setting recommendations for various operating modes
ADV7614-output-pixel-port-mapping-revA.xls Spreadsheet mentioned in the Hardware Design Manual
ADV7614_Rev0.1.ibs IBIS models of the ADV7614 I/O
     ADV7614Support     ZIP file of the three documents above
HDMI_RX_PowerSupplies_RevA_050411.pdf Hardware design and power supply layout recommendations


Scripts to run on the ATV Motherboard with the ADV7614 evaluation board
     ADV7614 Evaluation Board    ZIP file of the one document above
    •  Analog Employees 
    in reply to ADIApproved

    i.e, register CEC_TX_READY_ST, when it set to 1, why it is "New CEC message received"? not "CEC TX has transmitted a message successfully"?

    Another case for "CEC_TX_ARBITRATION_LOST_ST", when set to 1, why it is "CEC Tx has tried but failed to resend the current message", not "CEC Tx has lost arbitration to another Tx"?


    •  Analog Employees 
    in reply to Schang

    Could you explain what is actually wrong here?

    •  Analog Employees 

    Hi, The register description below in SW manual Rev.D seems inconsistent with the register name. Customer would like to know which information is correct?