Attached and linked are several files supporting the development of systems using the ADV7802.
We recomment that, if you download and use these documents, you subscribe to Email notifications for either the entire forum or at least this post by selecting your preferred option from the the Actions -> Following In drop-down menu to the right. In this way, you will be automatically notified if there are any comments or changes to this post or attached documents.
Guidelines for operating the ADV7802 in 2D mode without external memory
(file attached below)
Document listing a Built-in self test for memory interface
Scripts to run on the evaluation board with the DDR memory option
(file attached below in ADV7802 Evaluation Board Documents.zip)
Scripts to run on the evaluation board with the SDR memory option
In the 2D only operation document, there is an example script at the end. However, the addresses are extremely strange for me. For example:
54 17 02 ; Software Reset
What is 54?! According to the SW manual there is no such address, but regarding the comment I would guess it is the I/O block, since that one has a "Resets" register, but then the next byte is 0x17 which should be 0x60 for the "Resets" address....
Please correct me if I have a big mistake in my mind.
Thank you very much in advance!
Those writes are to configure the video decoder which is part of the test set up for the ADV7802