This FAQ applies to EVAL-ADV7612-7511 and EVAL-ADV7612-7511P. All support files in their latest versions will be attached below.
Below are the support files for these evaluation boards. If you use these files, we recommend that you subscribe to EMail notifications for either the entire forum or at least this FAQ by clicking on the menu to the right. In this way you will be automatically notified if there are any comments or changes to this FAQ or attached documents. If the menu choice is "Stop email notifications," then you are already subscribed.
We're working on fixing the broken links
Hi Mike,
We store these files/links in the ADV7612 design support files FAQ. I see the link is working now.
-Matt
Hi Tomoto-san,
There are some brief instructions here: Advantiv Video Evaluation Boards
However, we typically recommend that customers use RS232 port for input/output communications rather than USB. If you have any more questions, please create a new thread in the video forum.
Hello
Would you advise the procedure how to install "USB Driver for Advantiv Video Evaluation Boards"
in my PC.
AdvantivVideo.inf
AdvantivVideo.cat
Regards,
Tomoto
There are a lot of reference to this file: http://www.analog.com/static/imported-files/eval_boards/ADV7612_Recommended_Register_Settings.pdf but this link is broken. Where I can get latest (rev 1.5?) version of this document? Thanks in advance!
Thank you for PMing the document to me, I really appreciate your fast response.