2. Re: there is a black gap at the top of imageHello expert Thanks for your help! Problem has been resolved by setting User Map register 0x04 bit to 1,However, there is a black line in the bottom of image.why? Please refer to the attached file to get video,thank you!
3. Re: there is a black gap at the top of imageHi Yuanyuan Guo,Do you have ACE enabled?If so your issue could be the same as the one detailed at the link below:https://ez.analog.com/message/161266#161266 Regards,Robert
4. Re: there is a black gap at the top of imageHello expert The ACE function is disabled . Modification is Invalid when writing 0x00 to User Sub map 2, register 0x84 whether ACE function is disabled or enabled. Could you give me more try to fix this issue? Because we can only communicate once within a day,Thank you very much!
This FAQ was generated from the following discussion: Black line on the Output from the ADV7282-M