Post Go back to editing

about ad9920a  black clamp

we are using ad9920a+kai-02150.the left and right edge (about 100 pixel) of the image are more bright than the center part under low-light scene. we disable the clpob. when we set the clamp level to 0,the phenomenon is weak,to 3ff obvious.  the hardware or the setting of ad9920 is not right? who can give some advice and explanation about the black clamp of the AD9920A?

Parents
  • the setting are

    LineHDLEN
    =1546
    LineHBLKSTART =80
    LineHBLKEND =596
    LineVSTARTA =0
    LineVLENA
    =288
    LineCLPOBTOG1 =608
    LineCLPOBTOG2 =628
    FrameHDLEN =1546
    FrameHBLKSTART =80
    FrameHBLKEND =888
    FrameVSTARTA =0
    FrameVLENA
    =800
    FrameCLPOBTOG1 =8191
    FrameCLPOBTOG2 =8191
    LineLength
    =1546
    LastLine
    =1838
    CCDLineLength =1014
    CCDTotalLines =1152
    ES_START_PIXEL =80
    ES_END_PIXEL =120
    PBLK_START =8191
    PBLK_END =8191
Reply
  • the setting are

    LineHDLEN
    =1546
    LineHBLKSTART =80
    LineHBLKEND =596
    LineVSTARTA =0
    LineVLENA
    =288
    LineCLPOBTOG1 =608
    LineCLPOBTOG2 =628
    FrameHDLEN =1546
    FrameHBLKSTART =80
    FrameHBLKEND =888
    FrameVSTARTA =0
    FrameVLENA
    =800
    FrameCLPOBTOG1 =8191
    FrameCLPOBTOG2 =8191
    LineLength
    =1546
    LastLine
    =1838
    CCDLineLength =1014
    CCDTotalLines =1152
    ES_START_PIXEL =80
    ES_END_PIXEL =120
    PBLK_START =8191
    PBLK_END =8191
Children
No Data

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.