Our customer evaluates ADV7125.
VREF pin is connected to 5V through AC coupling as the description of datasheet .
5V waveform is unstable by another factor.
So Vref is undatabe by its factor.
Analog RGB output signal is unsatable and interference pattern is displayed on monitor.
Pleae let me know your advice about below 1 to 3 to modify unstability of RGB output signal
1: Change capacitance of VREF pin
2: Connect condencer for VREF pin to not 5V but GND
3: Open VREF pin
If there is any notice about above 1 to 3, pleaes let me know your advice.