Products Mentioned

ADV7612 Recommended for New Designs
The ADV7612 is offered in automotive, professional (no HDCP), and industrial versions. The operating temperature range is -40°C to +85°C. The UG-216 contains...
Datasheet
ADV7612 on Analog.com

Thread Details

  • State Verified Answer
  • Replies 2 replies
  • Subscribers 80 subscribers
  • Views 675 views
  • Users 0 members are here
Options 

        

            Post
             Go back to editing
        

    

    


    

    









		


















	
	
			
	
			
		
	
	
		

	    
	    
	    		
ＡＤＶ７６１２ oscillator

		
	
				

			

									
					    daisu
					
							

            
            			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Feb 5, 2015 
				
			
			
		
    
		
		                     
				
        		
    
		    
		    		    
		    			
    
			    
    Hello all,
    
 
    Clock source on evaluation boar of ADV7612 is crystal of 28.63636MHｚ.
    
 
    Question1
       Can I use oscillator ?
    
 
    Question2
       If possible, could you give me your advice about using oscillator
    
 
    Regards,
    
			
    
			
									
		                             
                        
		
    

				
				        
        		
    
			
						
									
												
			
			
                        
                                    
                        
                        
                        
            
			            
						
						
			
			
			
			
		
    

        
        
        
    
					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
		    
		    		    
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Feb 5, 2015 2:54 PM
            
            
						
			            		
      
		
										0
					
	
      

		
		
      
		
      
                                
                                                            
      
					
      Hello,
      
 
      Yes you can use an oscillator to clock the ADV7612.
      
 
      The oscillator should be fed into the XTALP pin of the ADV7612. XTALN pin should be left floating.
      
 
      The oscillator should be 1.8V pp.
      
 
      I advise using an oscillator with a 28.63636MHz  frequency.
      
 
      The oscillator must have an accuracy of 50 ppm over the entire temperature range of operation.
      
 
      We have seen issues before where programmable oscillators have not had this level of accuracy. I advise using a non-programmable oscillator.
      
 
      Regards,
      
 
      Robert Hinchy
      
 
      Applications Engineer,
      
 
      Analog Devices Inc.
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
		    
		    		    
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Feb 5, 2015 2:54 PM
            
            
						
			            		
      
		
										0
					
	
      

		
		
      
		
      
                                
                                                            
      
					
      Hello,
      
 
      Yes you can use an oscillator to clock the ADV7612.
      
 
      The oscillator should be fed into the XTALP pin of the ADV7612. XTALN pin should be left floating.
      
 
      The oscillator should be 1.8V pp.
      
 
      I advise using an oscillator with a 28.63636MHz  frequency.
      
 
      The oscillator must have an accuracy of 50 ppm over the entire temperature range of operation.
      
 
      We have seen issues before where programmable oscillators have not had this level of accuracy. I advise using a non-programmable oscillator.
      
 
      Regards,
      
 
      Robert Hinchy
      
 
      Applications Engineer,
      
 
      Analog Devices Inc.
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data
    

		
			
    

    





		
    
		
    
			
      
				
    • 
					
												
						
						
						
						
						
						
						

																										
						
						

					
					
					
				
      •