HPA_A and HPA_B Output Specification Clarification


I'm working with a hardware team on a new design using the ADV7619.  We seem to have discovered an anomaly in the documentation regarding HPA_A and HPA_B.

In the ADV7619 Reference Manual UG-237 Rev C. it is stated (pages 13 & 31) that HPA_A and HPA_B are open drain and need pull-up resistors.

However in the ADV7619 Datasheet Revision C these pins are shown as ordinary digital outputs (page 4) and as 5 V tolerant (page 12).

Please can you clarify if they are open drain or ordinary outputs.

Thank You,