Hello,
Do you have the reference design for AD8142 and AD8143? I've got the AD8143-AD8145_Customer_Eval_Board_Schematic but most resistance and capacitance are unknown.
Thanks!
KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
October Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Finding Your Circuit Chi — EMC Quiz!
Think you know EMC? Test your knowledge with our 5-question quiz!
Read the blog first, then take the challenge: Finding Your Circuit Chi
Every current flowing creates electromagnetic fields.
Strong EMC design
View All
AD8142
Production
The AD8141 and AD8142 are triple, low cost, differential or single-ended-input-to-differential-output drivers. Each amplifier
has a fixed gain of 2 to...
Datasheet
AD8142 on Analog.com
AD8143
Production
TThe AD8143 is a triple, low cost, differential-to-single-ended
receiver specifically designed for
receiving red-green-blue (RGB) signals over twisted...
Datasheet
AD8143 on Analog.com
Hello,
Do you have the reference design for AD8142 and AD8143? I've got the AD8143-AD8145_Customer_Eval_Board_Schematic but most resistance and capacitance are unknown.
Thanks!
Hi, Stephan.
AD8134 is an older version of AD8142 while the AD8147 is the higher version of both the AD8142 and AD8134. These three just differs in some of the specs like the power supply range, -3dB bandwidth, gain and the size of the exposed paddle. Two reference designs of video drivers are first, the use of AD8134 in the input stage of the AD8175 evaluation board (attached) and second, the use of AD8147 in CN-0275.
You can aslo build your own AD8142 board by using the attached schematic and then build an AD8143 using the shematic you have and the BOM that I attached. By buillding these boards, you could drive a very long UTP cable but still receive the good quality of your video signal.
You could also order evaluation boards of AD8142 and AD8143 so you could personally test these parts before making your own boards.
Let me know if you still have questions on these parts.
Regards,
Anna
Hi Anna,
Thank you so much! These help a lot!