Post Go back to editing

Does ADV7170 perform progressive to Interlace conversion?

Thread Summary

The user inquired about the ADV7170's capability to perform progressive to interlace conversion, noting a register for interlace control in composite video mode. The final answer confirmed that the ADV7170 is obsolete and suggested checking a related forum thread for further details. The accompanying answer provided a link to a relevant discussion thread.
AI Generated Content

Hi ,

I do understand that there is no support available for ADV7170.

But did it perform a progressive to interlace conversion . Because as per the datasheet there is a register which controls the output as interlace or progressive.

Below is the excerpt of the datasheet at page 30.

"MR1 BIT DESCRIPTION

Interlace Control (MR10)

This bit is used to set up the output to interlaced or noninterlaced mode. This mode is only relevant when the part is in composite video mode."

Data sheet can be viewed http://www.analog.com/media/en/technical-documentation/data-sheets/ADV7170_7171.pdf

Thanks in advance and plz reply asap