Hello,
I use a/m chip for PAL ->CSI conversion for further action by Raspberry pi4. For checking the image parameters I use HDMI and video monitor just to see the picture.
The problem I fight with for longer time is to get the same image quality when the CVBS is supplied. One time the image is really perfect but then it is very dark
or very bright. Completely random. The signal passed is of very good quality, there no unsteady state (it starts on ADV input clear and with very stable amplitude).
ADV is not powered off during brakes, once it was powered RPI4 sends an initial script by I2C and that's it. I tried many tricks but now I really have no idea what
to do to get the same image after each signal sending. What can we do with it ?
Best regards
Jacek
