I have a question about ADV7511W.
Our customer are using ADV7511W for R&D.
At table 4 the specification is about only Maximum Input Clock frequency.
Do you have a minimum Input Clock frequency specification ?
If you don't have the minimum specification , does it mean ADV7511W can receive any image data if the frequency is low enough?
For one example can ADV7511W receive 150MHz( 2200 x 1250 x 60p x10bit)?
Thank you for your reply.
So you mean the minimum input frequency for the video line will be 20MHz?
Your question has been forwarded to the part specialist
Q1) The minimum is specified by the HDMI standard and that would be 13.5MHz for NTSC
Q2) Minimum HDMI frequency is 20MHz. So for 13.5MHz NTSC, pixel repetition is used to get the data rate above this
Q3) I believe it can, however I do not have a unique script to give you. The 1080p60 script should work.
The minimum we test to is 13.5MHz input clock frequency. The device sets pixel repetition to 2x to get the TMDS rate above 20MHz.
Thank you for your answer.
I understood .
I have another question.
Do you have any specification for input clock Jitter?