(ADV7613)Can we use 2.2kOhm to pull-up?

Question

Hi ! 
 I have some question about ADV7613. 
 Q1) 
 Can we use 2.2k to pull-up DDCA_SDA , DDCA_SCL , SCL , SDA? 
 Q3) 
 Can you tell us which value should we use for pull-up? 
 Best regards. 
 Kawa

FormerMember · Accepted Answer

DDC is used only to transfer EDID and HDCP information. If this is a custom design then you might not need DDC at all. 10k or 2.2k pull ups would work fine. 
 Of course 2.2k for control I2C is great.)

Partner Forums

Partner Libraries

Products Mentioned

(ADV7613)Can we use 2.2kOhm to pull-up?