Products Mentioned

manuals Obsolete

Datasheet
manuals on Analog.com

ADV7403 Production
The ADV7403 is a high quality, single chip, multiformat video decoder and graphics digitizer. This multiformat decoder supports the conversion of PAL,...
Datasheet
ADV7403 on Analog.com

  • State Verified Answer
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 260 views
  • Users 0 members are here
Options 

        

            Post
             Go back to editing
        

    

    


    

    









		


















	
	
			
	
			
		
	
	
		

		
PC/MC



		

			

									
					    CantFindSwitch
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Jun 21, 2024 
				
			
			
		
    

				
		
    
		    		    
		    
		    		      		            		        
    Category: Software
    
    		        		            		    
    Product Number:  EVAL-ADV7403EBZ, ADV7403 
    
    		        		        		        
    Software Version: ADV Register Control 7.1
    
    		    		    	
			
    If i try to flash one of the skripts i get the message to switch the MC/PC switch to PC but i cant find the switch. (looked threw the manuals but coudnt find it. On the board i only found the reset and powersupply switches)
    

    Can someone help me here?
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 Video Products
                
                                                    
                 software
                
                                                    
                 EVAL-ADV7403EBZ
                
                                                    
                 product
                
                                                    
                 ADV Register Control 7.1
                
                                        
                                            
                
                
                                        
                                            
                
                
                                
                    Show More
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			


				
	









	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      •  Super User  
      
            
						
                            
            
            				
            
                on Jun 24, 2024 10:25 AM
            
            
					
      
	
      

		
		
      
					
      Hi,
      

      --> Please check the below options are set, as shown in figure and then click the OK button. 
      --> When the register control software starts, it firstly initializes all the selected 
      devices and then loads the reset defaults for each device.
      

      -->I2C control and reset signals are connected to the evaluation board through the USB cable. This USB cable 
      should be connected to the evaluation board before the application software is started.
      

       
      

      Thanks,
      

      Poornima.S
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
						
						
				
				
		
		
      
			
		
      
	
      

      

      •