ADV7182A AHD support

Question

Hi. Our customer wants to use analogue cameras to interface to an STM32U599 microcontroller. At Electronica, your Applications engineer recommended the ADV7182A and to use the YCbCr4:2:2 port of the STM. So far, so good. Our customer now wants to know if this solution will support AHD (Analogue HD) cameras. I know very little about cameras! Will this work? If not, do AD have a decoder that will support both standard analogue cameras and AHD? I notice that there was a similar question about the ADV7181D but that part is NRND 
 Cheers 
 Mark

PoornimaSubramani · Accepted Answer

Hi, 
 Please note that, the status (Product Life Cycle) of each product is available on its respective product page on analog.com and refer below snap for your reference. 
 
 For further information on Product Life Cycles, Monitoring Product Life Cycle Status and Obsolescence Information Please see this https://www.analog.com/en/about-adi/sustainability/product-life-cycle-information.html 
 And also, for additional information on Pricing or Product availability, We recommend that you contact your FAE or local ADI salesperson. 
 Contact details for your local ADI salesperson are available via the following page on the Analog Devices website: https://www.analog.com/en/about-adi/corporate-information/sales-distribution.html 
 
 Thanks, 
 Poornima)

PoornimaSubramani · Answer

Hi, 
 These are the decoders that can support AHD2.0 input to Pixel bus output - ADV7181C, ADV7181D,ADV7802,ADV7842,ADV7604,ADV7403. 
 Please refer our product page to know about the IN/OUT functionality of our Parts https://www.analog.com/en/products/audio-video/video-decoders.html 
 
 Thanks, 
 Poornima

Electronic Design Services - PartnerZone

Products In This Thread

ADV7182A AHD support

Top Replies