Post Go back to editing

Error in datasheets for MAX7300 and MAX7301

Category: Datasheet/Specs
Product Number: MAX7300 and MAX7301

I found an apparent minor error in your datasheets for the MAX7300 and MAX7301 (https://www.analog.com/media/en/technical-documentation/data-sheets/MAX7301.pdf) you might want to correct in their next revision.

MAX7300 figure 10 on page 17, and the corresponding MAX7301 figure 5 on page 12, both show a peculiar (AND-OR?) gate symbol (flat on input side, pointy on output side) with inputs from Mask Register bits. They're clearly intended to be AND gates (round end, not pointy). Although it's obvious, you might want to tidy up the diagram.

Thanks for making cool stuff, by the way! :-)

Top Replies

  • FormerMember
    FormerMember
+1 verified

You are correct, those should be true AND symbols.  They aren't even one of the 6 digital gate symbols.  We'll mark it for future updates.  Thanks for the feed back.

Parents
  • FormerMember
    +1 FormerMember

You are correct, those should be true AND symbols.  They aren't even one of the 6 digital gate symbols.  We'll mark it for future updates.  Thanks for the feed back.

Reply
  • FormerMember
    +1 FormerMember

You are correct, those should be true AND symbols.  They aren't even one of the 6 digital gate symbols.  We'll mark it for future updates.  Thanks for the feed back.

Children
No Data