adv202 error during the decoding of the bitstream when uploaded to the PC.

Question

Hi teams 
 The system architecture which I use consists of FPGA+ADV202, where the images and compressed bitstreams are transmitted using HDATA+DMA. The bitstream is uploaded to the the PC for decoding. The RGB test patterns are generated Inside the FPGA, converted to YCbCr, and then encoded by ADV202. The current test results are as follows: 
 (1) ADV202 is configured as 4x8-bit Single Component, 8-bit precision, and only Y Component is transmitted. The PC decoding result displays correctly. 
 (2) ADV202 is configured as 4x8-bit Packed YYCbCr, 8-bit precision. The RGB pattern decoded by PC displays incorrectly. 
 I have attached the relevant file after the question. 
 DOCX PDF 
 Thanks & Best Regards

PoornimaSubramani · Accepted Answer

Hi, 
 Could you please refer this thread and here expert given some suggestion about pixel encoding at (+) Encode a large pixels in ADV202/ADV212 - Q&A - Video - EngineerZone (analog.com) 
 
 Thanks, 
 Poornima)

Partner Forums

Partner Libraries

Products Mentioned

adv202 error during the decoding of the bitstream when uploaded to the PC.