Require GMSL2 User Guide and GMSLGUI tool

Hi,

 During PRBS test, ERRB function changes to reflect PRBS errors only. ERRB goes low when any PRBS errors occur. ERRB goes high when the PRBS error counter is reset when PRBS_ERR is read. Normal ERRB function resumes when exiting the PRBS test.

  Please refer here at MAX96711 14-Bit GMSL Serializer with High Immunity/Bandwidth Mode and Coax/STP Cable Drive | Analog Devices

Thanks,

Poornima

Hi,

It's not during, the GUI tool failed to start, because it send invalid command. Please see the first screenshot in the initial post.

Hi,

It's not during, the GUI tool failed to start, because it send invalid command. Please see the first screenshot in the initial post.

Hi,

  Could you please check the same with respective forum? In this forum we are aware only for Video related parts.

Thanks,

Poornima

Hi PoornimaSubramani ,

GMSL is designed for serializing Video stream, especally for MIPI CSI/DSI or eDP/HDMI. So it's should be part of Video.

Can you tell me which sub-forum is for discussing GMSL? I checked  https://ez.analog.com/subgrouplist, and found no one is fit then this Video sub-forum.

Hi,

We got some of the document from google search related GMSL, Please go through this and let us know whether you got any useful information from this link,

   https://www.stg-maximintegrated.com/en/products/interface/high-speed-signaling/MAX96717F.html

   https://www.stg-maximintegrated.com/en/design/software-description.html/swpart=SFW0019760C

This link is about 'MAX96717F' part Search | Analog Devices

Thanks,

Poornima