Join us and learn how to deliver exceptional performance for your small cell, macro or M-MIMO radio design. Among the embedded features reviewed will be...
1. Quote of the week: "Good judgment comes from experience, and experience comes from bad judgment" - Rita Mae Brown 2. New challenge (and this one...
We’re brewing something fun for Halloween! Show us your most brew-tiful costume for a chance to win a $25 gift card to your choice of stores. Maybe...
If you’ve started cooking for the holidays, then you know that the right spice blend can elevate a dish from good to great. And if the dish you’re cooking...
Last month, I published on creepage and clearance, which is well described in the IEC 60079 series of standards; see here . Over the last month, I have...
Technical articles. Blogs. Videos. Your ADI content, all in one place.
Blurb About Content
Kindly recommend me one 1:4 Video Buffer. Signal will be either YHV, Y/C, RGsB.
You might look at a MAX4022, https://www.analog.com/media/en/technical-documentation/data-sheets/MAX4014-MAX4022.pdf.
One chip can implement with good design a single channel 1-4 buffer, 3 chips would be able to handle your sources.
Also might check out AN57 www.analog.com/.../an57fa.pdf
If you come up with a schematic, we can review it.
I need single input to 4 output buffer. But it is for video signals
There is no single/low cost/no control chip that does 3 channel 1-4. Each output has to have it's own buffer and you can drive the 4 butters of one channel with 1 input.
