I already asked about this with few thread.
(ADV7511W)Do you have a script for QVGA YUV to RGB?
(ADV7511W)Does ADV7511W support QVGA?
Our customer are trying to make new script.
And I was checking ADV7481's script because there is no script for ADV7511W.
The different between 480p and 720p is this.
If our customer want to use ADV7511W with QVGA RGB to RGB where should they change?
We are checking with part specialist on this question and update you soon.
How is it going?
Can you help about this?
To modify a script you would need to know the parameters of the QVGA standard.
Horizontal front proch
Horizontal back proch
Sync width (H & V)
There is a lot of video parameters and in order to modify or create a custom script you would need all of them.
We are not sure if the ADV7511 will even pass QVGA. The internal design has line counters, pixel counters etc. Some of these could be sized so that VGA was only ever expected as a minimum. Also bear in mind the pixel clock rate. 25Mhz would be VGA I'm assuming QVGA is a bit less than this. Again the ADV7511 will probably need pixel repetition turned on in order to support a low freq pixel clock.
"We are not sure if the ADV7511 will even pass QVGA."
So do you mean you don't know ADV7511W can support QVGA?
I already asked about this.
If ADI can not support QVGA I have to explain it to my customer ASAP.
Also if ADV7511 cannot support QVGA, I think you should delete QVGA comment at the datasheet.