I have a custom board with a ZYNQ device xc7z030 interfaced to adv7511W HDMI Transmitter chip. I built the adv7511 HDL reference design from github for zc702 board and then modified the constraint file as per the custom board design. I built the SDK project with the sources and instructions mentioned in the thread https://ez.analog.com/fpga/f/q-a/116845/dmac_core-h-config-h-file-errors-for-the-adv7511-branch-of-2018_r2.
HDL reference source- https://github.com/analogdevicesinc/hdl.git
SDK sources- https://github.com/analogdevicesinc/no-OS/tree/adv7511_rework/projects/adv7511
When I run the application on the board I can see the debug messages on the serial terminal but there is no output on the HDMI monitor. What changes do I need to make in the application driver to use the sources for a custom board?
Can you please guide me as to how to get the system working? Any help will be much appreciated!
ADV7511 Xilinx Evaluation Boards Reference Design [Analog Devices Wiki]
For register configuration refer https://www.analog.com/media/en/technical-documentation/application-notes/AN-1270.pdf
Also Please refer here adv7511 - ZC702 - no display on HDMI port