Hi ADI expert,
My customer would like to setting LVDS single link of ADV7613 1080p/30 or 1080i/60 resolution, May I have register setting file? Thanks.
For single LVDS link, Please make sure with below register,
Single mode selection : TX_BYPASS_PIX_DEMUX, OpenLDI Tx, Address 0x4E
The ADV7613 LVDS transmitter can output a maximum clock frequency of 92 MHz.1080i/60Hz, the TMDS clock is 74.250MHz and 1080p/30Hz clock rate also would be 74.25Mhz .So we can output with single LVDS link.
Also make sure with below recommended writes configured for LVDS Output.ADI recommends the below register setting should be programmed to setup the ADV7613 in LVDS mode at ADV7613_Recommended_Settings_Guide.pdf C0 43 03 ADI Recommended write C0 45 04 ADI Recommended write C0 46 53 ADI Recommended write C0 47 03 ADI Recommended write
Note: A video format with a pixel clock of less than 92MHz can be output on a single TX or both TXs.A video format with a pixel clock of more than 92MHz must be output on both TXs.
Thanks so much for your reply.