Hi I'm trying to get this board to work but: without effect. I installed the drivers to a Windows 10 System, after connecting the board, windows sees a "Blackfin USB Device". If I now open the XRC Version 2p0 RC2, it opens a window, where it Say "SDP is connected" and after this, the XRC window appears. But I cannot load the board. What I try, the best is: i got an error called: Error: No USB Device Detected or, in following this: Error: No Boards selected. What is it, I'm doing wrong?
Additional: If I use Tools -> Device Scanner, I got 16 devices, all green. adress 0x70, 0x71, 0x72, 0x73, 0x78, 0x79, 0x7c, 0x7d, 0x7e, 0x7f, 0x98, 0x99, 0xa0, 0xa1, 0xe8 and 0xe9. it seems the connection is not complete dead, but also not working at all. maybe I've had done a configuration mistake.
I now tryed it at a windows7 PC with complete same behavior. The drivers got installed, after connecting the board it installed additional drivers (it doesn't for windows10). After starting XRC the window with the hint SDP is connected appears and after hitting the ok button XRC opens. but I can't load the board. whats wrong? I have no Idea anymore.
Please refer Section - CONTROLLING THE BOARD USING XRC 2p0RC2 you can get more details about loading the board using XRC 2p0RC2 in Page7 of Evaluation Board User Guide
I hope Quick_Setup_Guide.pdf this would also helpful for you.
Hi Poornima, I tryed the instruction to follow. The only file i found is 6763.ADV7613_2.zip . In this file, there is a script .txt file in a subfolder, and there is a txt file named "board info.txt. Also der is an ADV7613E2C.XML file. this file I tried to copy via drag and drop into the board selector window. There appears a message window, which is viewed so short, I can't say what it means, and then it follows a red note: No board selected. There is no readme or installable (.exe) file within this package. what should I do to get this board running?
I follwed the steps in the quick_setup_guide. It's all fine until point 3. point 4 is the problem: there is nothing to select in this board selector window. all 3 collumns have only one note: "None". nothing to select.
edit: in the quick setup guide pdf is said I should "select choose board". But there is only a button named auto detect. hitting this button only leads to the red warning no USB device detected.