According to ADV7343 datasheet, the external loop filter looks like Fig. 92 (p.73).
00c55e5c37945aa5d278fc47da2424e4.html
The questions are;
1. What kinds of side-effect would occurr if the 150nF capacitor value would be changed between -20% (120nF)~+80% (270nF?) in the worst case?
2. How much margin would be permitted in this capacitor, from design point of view?
As for Q1, since it determines the filter characteristics, I assume the noise or something would be appeared in the picture in the worst case.
Message was edited by: Andy to correct part number from ADV7240 to ADV7402
message edit by HankZ 05/17/10 to correct part number to ADV7343 and correct page number for Fig.92