I am doing some content addition in an FPGA and need to know what EAV/SAV codes are used when the NEWAVMODE bit is low (0x31=0)? It is not clear from the datasheet if where the vertical sync is when NEWAVMODE=0. On page 46 of the datasheet (Rev F):
NEWAVMODE, New AV Mode, Address 0x31
When NEWAVMODE is 0, EAV/SAV codes are generated to suit Analog Devices encoders. No adjustments are possible.
I am using the Eval board with the ADV7180LF and the ADV7191...