Could not locate app_edid.c - VisualDSP++ 5.1.2

Hi Everyone,

I have searched EZ for this problem but I was unable to find any results.  I am using the EVAL-ADV7625-SMZ board.

After installing a fresh copy of VisualDSP++ 5.1.2 off the ADI website, I opened up VisualDSP++ and navigated to File > Open > Project..., and then to
VisualDSP 5.1.2/Blackfin/Examples/BF_7625_7625_X2.3.3REL_20150323/ADV7625_BF524.dpj, it won't open the project file.  I get the following error window for a missing source file:

When I obtained the latest SDK software pack for my EVAL board (ADV7625_Evaluation_Board_Software-Rel2.4.0), it contained the following files in the SRC directory:

When I copied these files across (overwrote them) in the Examples\BF_7625_7625_X2.3.3REL_20150323\ADV7625_SW directory the situation never changed, and I still got the same error message.

"Could not locate the file: app_edid.c"

It seems that the software pack ADV7625_Evaluation_Board_Software-Rel2.4.0 does not contain app_edid.c.

Surely an example that comes packed with an IDE from Analog Devices for one of their own EVAL boards should at least open (let alone compile).  Could it be that the example and the software pack are too far apart in date?

If so, could you recommend a software pack, EVAL-ADV7625-SMZ example, or both that actually open and compile?

Thankyou!

Andrew



Indent error message for clearer reading.
[edited by: andyjjones1 at 8:21 AM (GMT 0) on 11 Nov 2019]
Parents
  • 0
    •  Analog Employees 
    on Nov 11, 2019 10:23 AM

    Hi Andrew,

    There are differences in EDID related source files between X2.3.3 and 2.4.0.

    Those modified files needs to be taken care when compiling the old project with new software package.

    We will post the updated VDSP project for 2.4.0 soon in EZ page.

    Please follow the steps as shown below, build the project and let us know if you have any issues.

    1. Remove app_edid.c and app_edid.h from folder XREP/EDID as shown below

    2. Remove eedid.c and eedid.h & add edidmerge.c and edidmerge.h from folder MIDLWARE/EDID as shown below

    3. In addition to the above, there are some additional files under OSD/firmware/source folder, please add those files also if you are using OSD.

    Thanks,

    Poornima

Reply
  • 0
    •  Analog Employees 
    on Nov 11, 2019 10:23 AM

    Hi Andrew,

    There are differences in EDID related source files between X2.3.3 and 2.4.0.

    Those modified files needs to be taken care when compiling the old project with new software package.

    We will post the updated VDSP project for 2.4.0 soon in EZ page.

    Please follow the steps as shown below, build the project and let us know if you have any issues.

    1. Remove app_edid.c and app_edid.h from folder XREP/EDID as shown below

    2. Remove eedid.c and eedid.h & add edidmerge.c and edidmerge.h from folder MIDLWARE/EDID as shown below

    3. In addition to the above, there are some additional files under OSD/firmware/source folder, please add those files also if you are using OSD.

    Thanks,

    Poornima

Children