Hello,
I am using an AD9889B,sucessfully transmitting 720p60 and 480p60 signals.
Now I tried to transmit 1080p60.
AD9889B corrently recognizes the mode that I send to it by reading these registers(R0x3D=0x10,R0x41=0xF8,R0x42=0x10,all circuits powered up and Hot plug active),but the display is black.I've tried many diffrent displays(samsung and others),all displays are black.
I modify R0xA2 and R0xA3 to 0X87,and change the timing sequence following EIA-CEA-861-D(verified with a scope),and using videoclock of 148.5MHz,but it's not working.
I've tried 1280*768 60Hz too,the videoclock of 108MHz,the display is sign good and black from time to time.
I am not using HDCP.
Any other regiter must be modfied?
many thanks
Tom
