Post Go back to editing

ADV7511W and ADV7511 (non-W) register compatible with ADV7513 ?

Hello,

My understanding is that the ADV7511W Tx is identical to ADV7513 (http://www.analog.com/en/audiovideo-products/analoghdmidvi-interfaces/adv7513/products/product.html) Tx in form, fit, and function (pins for pin, same software / register identical).

Essentially, the two can be used interchangeably, as the register configuration is the same.

I have a customer that found a Xilinx reference design that is using an ADV7511 (different pinout than "W") and is asking if that version of the part is also register compatible with the ADV7513. Ideally, they want to develop the code on the Xilinx board and move it over to their ADV7513/ADV7511W design seamlessly.

Let me know if you think this is possible.

Mike

Parents
  • Hi Mike,

    I've been looking for a document that goes over the differences between 7513/7511W and 7511 but haven't found one.  Any register differences are extremely minor. It would certainly be possible to do a design for 7511 and migrate as long as you aren't using anything the 7513/7511W can't do. (ADV7511 is a more full featured part).

    Dave

Reply
  • Hi Mike,

    I've been looking for a document that goes over the differences between 7513/7511W and 7511 but haven't found one.  Any register differences are extremely minor. It would certainly be possible to do a design for 7511 and migrate as long as you aren't using anything the 7513/7511W can't do. (ADV7511 is a more full featured part).

    Dave

Children
No Data